Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrocatalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A Rhenium Bis -tetramethylphenanthroline Catalyst for CO 2 Reduction to Formate

Catalytic CO 2 reduction reactions featuring high selectivity toward formate are relatively rare. In some homogeneous molecular CO 2 -reducing electrocatalysis, using triethylamine (TEA) and isopropanol (IPA) as additives improves catalytic performance in producing formate. In this paper, we investigate whether the rhenium(I) bis-diimine dicarbonyl complexes, cis-[Re(N^N) 2 (CO) 2 ] + , where N^N is 2,2’-bipyridine ([1] + ) or 3,4,7,8-tetramethyl-1,10-phenanthroline ([2] + ), are capable of electrocatalytically reducing CO 2 to formate in acetonitrile containing TEA and IPA. Catalyst [1] + was ineffective at CO 2 reduction, yielding formate quantities comparable to those produced in experiments without the catalyst. Catalyst [2] + , however, is a promising electrocatalyst for the CO 2 reduction reaction in the presence of TEA and IPA, with formate being produced in millimolar concentrations (10.5 mM), as detected by 1 H NMR spectroscopy after 6 h electrolysis (formate Faradaic efficiency = 11%, with the major balance going to H 2 ). Upon more detailed examination, [2] + exhibited a turnover frequency (TOF) of 12 s –1 for formate, comparable to other leading molecular catalysts that competently execute this reduction. Combinations of spectroscopy, electrochemistry, and theory were used to better understand the mechanism of CO 2 reduction by [2] + . Fourier transform infrared spectroelectrochemical (FTIR-SEC) data provided no evidence for CO ligand dissociation or substitution upon one- and two-electron reduction of [2] + , suggesting that a mechanism distinct from one that is metal-hydride-based is operative in catalysis. Computational studies guide mechanistic investigations toward the proposed formation of a hydrophenanthroline-based intermediate responsible for hydride transfer to CO 2 and electrocatalytic formate production from [2] + .

Beverages↗
DOE OSTI2020

Intramolecular Electrostatic Effects on O 2 , CO 2 , and Acetate Binding to a Cationic Iron Porphyrin

Noncovalent electrostatic interactions are important in many biological and chemical reactions, especially those that involve charged intermediates. There has been a growing interest in using electrostatic ligand designs—placing charges in the second coordination sphere—to improve molecular reactivity, catalysis, and electrocatalysis. For instance, an iron porphyrin bearing four cationic ortho -trimethylanilinium groups, Fe( o -TMA), has been reported to be an exceptional electrocatalyst for both the carbon dioxide reduction reaction (CO 2 RR) and the oxygen reduction reaction (ORR). These reactions involve many different steps, and it is not evident which steps are affected by the four positive charges, or why. By comparing Fe( o -TMA) with the related iron-tetraphenylporphyrin, this work examines how covalently positioned charged groups affect substrate binding and other key pre-equilibria of both the ORR and CO 2 RR, specifically acetate, dioxygen, and carbon dioxide binding. This study is among the first to directly measure the effects of electrostatics on ligand-binding. The results show that adding electrostatic groups to a catalyst design often results in a complex interplay of multiple effects, including changes in pre-equilibria prior to substrate binding, combinations of through-space and inductive contributions, and effects of ionic strength and solution dielectric. The inverse half-order dependence of binding constant on ionic strength is proposed as a clear marker for an electrostatic effect. Overall, the conclusions provide guidance for the increasingly popular electrostatic ligand designs in catalysis and other reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Note to Reviewers Suggesting Post-reaction Catalyst Characterization: Know What You’re Asking For

Here, we highlight examples of post-reaction characterization in thermo- and electrocatalysis to present the challenges in obtaining reliable data to answer specific questions about the true identity of the active site and/or catalyst deactivation/degradation. We use this editorial to suggest to reviewers that, when formulating comments to authors that involve materials characterization after reaction testing, they should consider what specific, meaningful information can be attained or what targeted question can be answered that adds value to the individual paper and to the field in general, and how to reasonably obtain that data. In contrast, reviewers should avoid vague, open-ended comments that suggest unguided post-reaction characterization that would not add significant value to the report and, similarly, avoid comments that are substantial enough that they could form the basis of an entirely separate report.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reconciling Work Functions and Adsorption Enthalpies for Implicit Solvent Models: A Pt (111)/Water Interface Case Study

Implicit solvent models are a computationally efficient method of representing solid/liquid interfaces prevalent in electrocatalysis, energy storage, and materials science. However, electronic structure changes induced at the metallic surface by the dielectric continuum are not fully understood. To address this, we perform DFT calculations for the Pt(111)/water interface, in order to compare Poisson–Boltzmann continuum solvation methods with ab initio molecular dynamics (AIMD) simulations of explicit solvent. We show that the implicit solvent cavity can be parametrized in terms of the electric dipole moment change at the equilibrated explicit Pt/water interface to obtain the potential of zero charge (PZC). We also compare the accuracy of aqueous enthalpies of adsorption of phenol on Pt(111) using geometry and charge density based dielectric cavitation methods. The ability to parametrize the cavity according to individual atoms, as afforded in the geometry based approach, is key to obtaining accurate enthalpy changes of adsorption under aqueous conditions. Additionally, we show that the electronic structure changes induced by explicit solvent and our proposed implicit solvent parametrization scheme yield comparable density difference profiles and d-band projected density of states. We therefore demonstrate the capability of implicit solvent approaches to capture both the energetics of adsorption processes and the main electronic effects of aqueous solvent on the metallic surface. Therefore, this work provides a scheme for computationally efficient simulations of interfacial processes for applications in areas such as heterogeneous catalysis and electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Descriptors for Hydrogen Evolution on Single Atom Catalysts in Nitrogen-Doped Graphene

Single-atom catalysts (SACs) are a new research frontier in electrocatalysis such as in the hydrogen evolution reaction (HER). Recent theoretical and experimental studies have demonstrated that certain M–N–C (metal–nitrogen–carbon) based SACs exhibit excellent performance for HER. Here we report a new approach to tune HER activity for SACs by changing the size and dimensionality of the carbon substrate while maintaining the same coordination environment. In this work, we screen the 3d, 4d, and 5d transition metal SACs in N-doped 2D graphene and nanographenes of several sizes for HER using first-principles density functional theory (DFT). Nanographenes containing V, Rh, and Ir are predicted to have significantly enhanced HER activity compared to their 2D graphene counterparts. We turn to machine learning to accurately predict the free energy of hydrogen adsorption (ΔGH) based on various descriptors and compressed sensing to identify key descriptors for activity, which can be used to further screen for additional candidates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Locally Engineering and Interrogating the Photoelectrochemical Behavior of Defects in Transition Metal Dichalcogenides

Transition metal dichalcogenides (TMDs) are attractive materials for a variety of applications in solar energy conversion and electrocatalysis, due to their favorable optical and electrical properties and their unique two-dimensional structures which facilitate the fabrication of wide-area, ultrathin layers. Unfortunately, the basal planes which make up the majority of these materials are relatively inert, and thus a great deal of effort has been directed to engineering favorable, catalytically active defects into these materials. In this paper, we demonstrate how probe-based electrochemical techniques can be employed as multifunctional tools for locally modifying TMD materials and probing the electrochemical behavior of the resulting defects. Scanning Electrochemical Cell Microscopy (SECCM) was employed to locally anodize exfoliated p-type WSe 2 nanosheets, creating hole-like defects within individual basal planes in a highly controllable fashion. Photoelectrochemical SECCM imaging was then employed to characterize the chemical behavior of these engineered defects, revealing significantly enhanced activity toward the Hydrogen Evolution Reaction (HER). Atomic force microscopy studies are presented which suggest these enhancements result from an increased density of monolayer-high step features within the anodized defects. Analysis of the SECCM data in the context of finite element simulations revealed that these enhancements increased with increasing anodization time, with local kinetic rates over 2 orders of magnitude higher than unaltered basal planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Revealing Local and Directional Aspects of Catalytic Active Sites by the Nuclear and Surface Electrostatic Potential

This work examines the prospects of using the electrostatic potential, V(r), as a descriptor in heterogeneous catalysis. In particular, the subatomic spatial resolution of the property allows for analysis of both directionality and confinement effects in surface adsorption. This feature of V(r) is used to identify adsorption sites, orientations, and energetics for metal surfaces, particles, and nanoclusters upon interactions with catalytically relevant intermediates. The use of V(r) in assessing the 3D nature of catalytic sites in low-temperature and electrocatalysis is highlighted, and future directions in catalysis design are discussed. Ultimately, we provide a critical analysis of the use of V(r) in the predictions of local adsorption susceptibilities, and we address its limitations. The link between V(r) and other established descriptors in catalysis are motivated via physical relations and theoretical derivations; close ties are established between V(r) and the d-band center (ε d ), as well as the surface site stability (BE M ). In conclusion, by comparing the performance of V(r) evaluated on isodensity contours, i.e., the surface electrostatic potential, to that of V(r) evaluated at the nucleus of an atom, we investigate the application space for a directional and an atom-localized version of the V(r) descriptor for catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Moiré Patterns in Pt Overlayers on Gold: A Graph Neural Network Interatomic Potential Study

Overlayer structures in bimetallic catalysts are relevant to a variety of catalytic reactions, particularly in electrocatalysis for fuel cell applications. Previous computational studies largely consider these overlayer structures to be those of a pseudomorphic overlayer, where there is a 1:1 atomic ratio between the overlayer and the support metal. Our previous work based on density functional theory (DFT) has shown that there exist nonstoichiometric overlayer structures that are more stable than the stoichiometric ones. Here, in this work, we developed a graph neural network interatomic potential (GNN-IP) to analyze structures formed in Pt overlayers on Au(111). The GNN-IP was used to explore properties of nonstoichiometric overlayers at length scales that are prohibitively expensive to pursue with planewave DFT calculations. In particular, we examined large Pt islands on top of a 48 × 48 Au(111) unit cell to explore the influence of the rotational angle (α) between the Pt overlayer and support Au(111) on both the stability of and the preferred atomic density in the overlayer. Island structures with smaller rotational angles between the Pt overlayer and Au(111) tend to be more stable. Further, smaller rotational angles tend to result in lower atomic density in the Pt overlayer.

chemical structure↗
DOE OSTI2026

Adapted Cell Design for the Operando X‑Ray Absorption Study of a Structurally Evolving Cu Nanoparticle Ensemble during the CO2 Electroconversion to Multicarbon Products

An improved understanding of the materials that will sustain the future of energy production, storage, and delivery calls for better characterization tools. Operando characterization methods have thus become essential for investigating electrocatalytic materials. Without their resulting insights, the study of highly performing catalysts post-mortem cannot viably facilitate the further development of functional catalysts. Herein, we present an operando electrochemical cell designed for hard X-ray absorption spectroscopy (XAS) and specifically adapted to the study of an electrocatalytically active Cu nanoparticle ensemble. So far, this nanocatalyst has proven to pose quite a challenge to characterize due to its unique structural dynamics. Adopting a design comparable to the H-cell employed for all activity testing, we report the satisfactory translation of the active site formation into an XAS-compatible cell. The simultaneous collection of CO2-derived products during XAS characterization enabled the operando characterization of this CO2-reducing active structure. We report a Cu–Cu coordination number of the first scattering path higher than suggested in our previous studies, highlighting the importance of monitoring metastable nanoelectrocatalysts in operando. This study illustrates important caveats for the electrocatalysis community when considering the application of operando XAS. Our results highlight that the sample size, homogeneity, and stability determine how to interpret the measured signal. Considering these parameters carefully, the operando EXAFS results confirm the exceptional undercoordinated character of the Cu nanoparticle ensemble during CO2 reduction to C2+ products.

Louisia, Sheena↗
DOE OSTI2019

Electroanalytical Investigation of the Electrode–Electrolyte Interface of Quaternary Ammonium Ionic Liquids: Impact of Alkyl Chain Length and Ether Functionality

The influence of ionic associations and potential-dependent interactions on the electrode–electrolyte interfacial structure of ionic liquids (ILs) is studied by electrochemical impedance spectroscopy (EIS) and surface-enhanced Raman spectroscopy (SERS) for a variety of asymmetric quaternary ammonium ILs. Specifically, the impact of cation alkyl chain length (C = 4, 8 and 16) and ether functionality on the interfacial structuring of ILs at the glassy carbon electrode surface is examined. Ammonium cations with alkyl chain length of 8 and 16 carbons are found to stabilize the formation of the bis(trifluorosulfonyl)imide, [TFSI], anion dense Stern layer at positive electrode potentials leading to larger capacitances. The longer alkyl chain of the cation is believed to screen the ion–ion repulsion among the anions by intruding into the interfacial anion layer. SERS suggests the presence of carbon-containing rings at the interface at both positive and negative electrode potentials, which can be explained by the buckling of the long alkyl chains. Inclusion of an ether functionality allowed for more symmetry in the camel-shaped potential-dependent differential capacitance curves, suggesting similar excess ion density at both positive and negative potentials. This work contributes to understanding and predicting the interfacial electrode capacitance in ILs by understanding the balance of ionic interactions and the associated repulsions at electrode–electrolyte interfaces that are pertinent to electrochemical energy storage, electrocatalysis, and electrochemical sensors.

25 ENERGY STORAGE↗
DOE OSTI2020

Light-Controlled Nanoparticle Collision Experiments

Electrochemical monitoring of catalytically amplified collisions of individual metal nanoparticles (NP) with ultramicroelectrodes (UME) has been extensively used to study electrocatalysis, mass-transport, and charge-transfer processes at the single NP level. More recently, photoelectrochemical collision experiments were carried out with semiconductive NPs. Here we introduce two new types of light-controlled nano-impact experiments. The first experiment involves localized photodeposition of catalyst (Pt) on TiO 2 NPs with a glass-sheathed carbon fiber simultaneously serving as the light guide and collector UME. The collisions of in situ prepared Pt@TiO 2 NPs with the carbon surface produced blips of water oxidation current, while the activity of pristine TiO 2 NPs was too low to yield measurable signal. In another experiment, collisions of catalytic (Ir oxide) NPs with the semiconductor (Nb doped n-type TiO 2 rutile single crystal) electrode are monitored by measuring the photocurrent of water oxidation.

14 SOLAR ENERGY↗
DOE OSTI2021

Proton-Coupled Defects Impact O–H Bond Dissociation Free Energies on Metal Oxide Surfaces

Proton-coupled electron transfer (PCET) reactions on metal oxides require coupling between proton transfer at the solid-liquid interface and electron transfer involving defects at or near the band edge. Herein, hybrid functional periodic density functional theory is used to elucidate the impact of proton-coupled defects on the bond dissociation free energies (BDFEs) of O-H bonds on anatase TiO 2 surfaces. These O-H BDFEs are directly related to interfacial PCET thermochemistry. Comparison between geometrically similar O-H bonds associated with different defect types, namely conduction d-band electrons or valence p-band holes, reveals that the BDFEs differ by ~81 kcal/mol (3.50 eV), comparable to the wide TiO 2 band gap. These differences are shown to be determined primarily by differences in electron transfer driving forces, which are analyzed by using band energies and inner-sphere reorganization energies within a Marcus theory framework. Furthermore, these fundamental insights about the impact of proton-coupled defects on PCET thermochemistry at semiconductor surfaces have broad implications for electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling Absolute Redox Potentials of Ferrocene in the Condensed Phase

Absolute thermodynamic quantities for critical chemical reactions are needed to determine the role of solvents and reactive environments in catalysis and electrocatalysis beyond the relative scales typically employed. In principle, theoretical methods can provide such quantification but are often hindered by the innate complexity of strong electron correlation and dynamic relaxation of solvent environments. Here, we present and validate a protocol for calculating the redox potentials of ferrocene/ferrocenium redox pair in the acetonitrile. Equation-of-motion ionization potential coupled-cluster single-double (EOM-IP-CCSD) and effective fragment potential (EFP) methods are used to characterize the adiabatic and vertical ionization potentials (IP) as well as the electron affinity processes. We benchmark molecular mechanics against the EFP model to show the differences in ferrocene electronic polarizability in two redox states. Our best estimate of the redox potential (4.94 eV) agrees well with the experimental value (4.93 eV). This demonstrated the ability of modern computational methods to predict absolute redox potentials quantitatively and, more critically, quantify the correlation of dynamic effects, which underlie their origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Resolution of Selectivity Steps of CO Reduction Reaction on Copper by Quantum Monte Carlo

Electrochemical reduction of carbon monoxide to valuable fuels and chemicals on copper surfaces remains a challenging area in catalysis due to a limited understanding of adsorption mechanisms and reaction pathways. Although density functional theory (DFT)-based studies have investigated these processes, their accuracy varies across different functionals. Here, in this study, we present the application of fixed-node diffusion Monte Carlo (FNDMC) to benchmark the adsorption energies of CO*, H*, and key CO reduction reaction (CORR) intermediates, COH* and CHO* on the Cu(111) surface. Our results for CO* and H* adsorption energies closely align with experimentally measured chemisorption reactions, highlighting the limitations of DFT and providing site-specific energy comparisons that are often not available experimentally. Additionally, we explore the effect of explicit solvation, demonstrating how water stabilizes the COH* over CHO*, thus suggesting a critical role of COH* in CORR. Finally, we release our high-accuracy FNDMC benchmarks for testing and developing new DFT functionals for electrocatalysis. Overall, this study underscores the potential of FNDMC for detailed surface chemistry studies and offers new insights into catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Designing the Nanoconfined Environment for Energy-Efficient Metal Nanoparticle/Ligand-Based Electrocatalysts

Nanoconfined electrocatalysts demonstrate enhanced selectivity and activity owing to new phenomena emerging from chemical species confined at the interface. Creating these nanoconfined pockets at the interface is not trivial. We need highly negative potentials to create the pockets in metal/ligand catalysts like Ag-nanoparticle/ordered ligand interlayer catalysts. Lowering this activation potential can make the electrocatalysis more energy-efficient, and changes in the environment can impact this potential. We used Density Functional Theory (DFT) to evaluate the impact of ligand length and density, interfacial protons, and surface defects like Ag vacancies and Cu and Au dopants. The nanoconfined configuration is stabilized when the ligands are longer and more densely packed, leading to better agglomeration. It is also stabilized when the ligands adsorb protons and when the ligands detach from the surface easily owing to lower charge transfer. Au-doped surfaces displayed the lowest charge transfer and decreased the activation potential.

Jana, Asmita↗
DOE OSTI2022

Electrodeposition of Complex High Entropy Oxides via Water Droplet Formation and Conversion to Crystalline Alloy Nanoparticles

We report that a combination of electrodeposition and thermal reduction methods have been utilized for the synthesis of ligand-free FeNiCo alloy nanoparticles through a high-entropy oxide intermediate. These phases are of great interest to the electrocatalysis community, especially when formed by a sustainable chemistry method. This is successfully achieved by first forming a complex five element amorphous FeNiCoCrMn high-entropy oxide (HEO) phase via electrodeposition from a nanodroplet emulsion solution of the metal salt reactants. The amorphous oxide phase is then thermally treated and reduced at 570–600 °C to form the crystalline FeNiCo alloy with a separate CrMnO x cophase. The FeNiCo alloy is fully characterized by scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy elemental analysis and is identified as a face-centered cubic crystal with the lattice constant a = 3.52 Å. The unoptimized, ligand-free FeNiCo NPs activity toward the oxygen evolution reaction is evaluated in alkaline solution and found to have an ~185 mV more cathodic onset potential than the Pt metal. Beyond being able to synthesize highly crystalline, ligand-free FeNiCo nanoparticles, the demonstrated and relatively simple two-step process is ideal for the synthesis of tailor-made nanoparticles where the desired composition is not easily achieved with classical solution-based chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rapid Atomic Ordering Transformation toward Intermetallic Nanoparticles

Chemically ordered intermetallic nanoparticles are promising candidates for energy-related applications such as electrocatalysis. However, the synthesis of intermetallics generally requires long annealing (several hours) to achieve the ordered structure, which causes nanoparticles agglomeration and diminished performance, particularly for catalysis. Herein, we demonstrate a new rapid Joule heating approach that can synthesize highly ordered and well-dispersed intermetallic nanoparticles. As a proof-of-concept, we synthesized fully ordered Pd 3 Pb intermetallic nanoparticles that feature small size distribution (~6 nm). Computational analysis of the L1 2 Pd 3 Pb material suggests that this rapid atomic ordering transformation can be attributed to a vacancy-mediated diffusion mechanism. Moreover, the nanoparticles demonstrate excellent electrocatalytic activity and exceptional stability for the oxygen reduction reaction (ORR), retaining >95% of the current density over 10 h of chronoamperometry test with negligible structural and compositional changes. Furthermore, this study demonstrates a new strategy of providing a new direction for intermetallic synthesis and catalyst discovery.

25 ENERGY STORAGE↗
DOE OSTI2021

Electronic Structure, Chemical Bonding and Electrocatalytic Activity of Novel Ba(Fe0.7Ta0.3)O3-d Compounds

Ba(Fe0.7Ta0.3)O3-d (BFTO) compounds were synthesized using conventional, high-temperature solid-state ceramic reaction method by varying the sintering temperature (Ts=1200-1350 °C). The crystal structure, electronic structure and electrocatalytic activity of BFTO compounds were evaluated. Processing temperature induced phase transformations and structural quality influences the electronic structure and electrocatalytic activity of BFTO compounds. At Ts=1200 oC, Ba(Fe0.7Ta0.3)O3-d stabilizes in mixed phase of orthorhombic + rhombohedral phase (Amm2 + R3m). With increasing Ts (=1250 oC), Ba(Fe0.7Ta0.3)O3-d ceramics stabilize in tetragonal + rhombohedral [P4mm + R3m] mixed phase with a variation in the quantity of respective phases. High-resolution X-ray photoelectron spectroscopy of constituent elements, namely, Ba 3d, Fe2p, Ta 4f and O 1s reveal the electronic structure changes due to changes in chemical environment resulted from structural transformation. The electrocatalytic activity of BFTO was evaluated towards hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). Though all the samples demonstrated appreciable electrocatalytic properties, the best electrochemical catalytic activity was shown by BFTO samples sintered at 1350 °C. BFTO-1350 oC showed an onset potential of -0.690 V vs. RHE for HER and an onset potential of 0.73 V vs. RHE for ORR indicating its significant electrocatalytic performance. A general increase in activity with sintering temperature is potentially due to the improved structural quality of the BFTO ceramics. In addition to offering the fundamental insights into solid state materials based on doped BaTiO3 for electrocatalysis, the present work may contribute to the design and development of materials for high-temperature electrocatalytic converters.

Ba(Fe0.7Ta0.3)O3-d, Phase Transformation↗