Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamical balances”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Kramers' degeneracy for open systems in thermal equilibrium

Kramers' degeneracy theorem underpins many interesting effects in quantum systems with time-reversal symmetry. We show that the generator of dynamics for Markovian open fermionic systems can exhibit an analogous degeneracy, protected by a combination of time-reversal symmetry and the microreversibility (detailed balance) property of systems at thermal equilibrium—the degeneracy is lifted if either condition is not met. We provide simple examples of this phenomenon and show that the degeneracy is reflected in the single-particle Green's functions. Furthermore, we show that certain experimental signatures of topological edge modes in open many-body systems can be protected by microreversibility in the same way. Our results highlight the importance of detailed balance in characterizing open topological matter.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Numerical assessment of triply periodic minimal surfaces for direct air capture of carbon dioxide

Direct air capture (DAC) systems often consist of packing material wetted by a capture fluid that reacts with CO 2 in the airstream. The efficiency of the contactor is determined by a complex relationship of fluid dynamics, heat and mass transfer, contactor geometry, and chemical properties. The efficiency of the contactor must be balanced with other factors, primarily pressure drop through the system. Triply periodic minimal surfaces (TPMS) are a class of differential surfaces that have been explored in multiple engineering applications and have been shown to exhibit excellent performance when used in heat exchangers. Their tortuous path provides a high surface-to-volume ratio and favorable trade-off between contact area and pressure drop. In this work, a gyroid-type TPMS contactor was evaluated using computational fluid dynamics for a variety of geometric parameters to explore the potential benefit of TPMS shapes for DAC applications. A thin-film model was employed to model the flow and distribution of the capture solvent, allowing efficient simulations of TPMS structures at scale by eliminating the need for a computationally intensive interface capturing method. A liquid-gas mass transfer model was implemented in the commercial software STAR-CCM+ and used to predict the CO 2 capture efficiency and study the trade-off between capture performance and pressure drop through analysis of capture rates, mass transfer coefficients, and other relevant variables. TPMS contactors with a variety of geometric parameters and two capture solvent options were investigated to determine the effect of design choices on the operational performance of DAC systems. In conclusion, results showed that while contactor geometry is the dominant factor in efficiency and pressure drop, the physiochemical properties of the solvent are an important secondary influence on the contactor performance.

CFD↗
DOE OSTI2026

Adaptive Sampling-Based Bi-Fidelity Stochastic Trust Region Method for Stochastic Derivative-Free Optimization

Bi-fidelity stochastic optimization has gained increasing attention as an efficient approach to reduce computational costs by leveraging a low-fidelity (LF) model to optimize an expensive high-fidelity (HF) objective. In this paper, we propose ASTRO-BFDF, an adaptive sampling trust-region method specifically designed for unconstrained bi-fidelity stochastic derivative-free optimization problems. In ASTRO-BFDF, the LF function serves two purposes: (i) to identify better iterates for the HF function when the optimization process indicates a high correlation between them and (ii) to reduce the variance of the HF function estimates using bi-fidelity Monte Carlo (BFMC). The algorithm dynamically determines sample sizes while adaptively choosing between crude Monte Carlo and BFMC to balance the trade-off between optimization and sampling errors. We prove that the iterates generated by ASTRO-BFDF converge to a first-order stationary point almost surely. Additionally, we demonstrate the effectiveness of the proposed algorithm through numerical experiments on synthetic benchmarks and simulation optimization problems involving discrete event systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Matlab implementation of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures

This paper presents the MatLab implementation details of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures. This includes the parameterization of the modeling equations, and the initialization of the simulation based on experimental conditions. More importantly, it provides details on how the differential equations governing mass balances in both gas and liquid phases are integrated together to simulate the system dynamics over time. The semi-structured kinetic model for methanotroph-photoautotroph coculture is validated using a wide range of experimental conditions. The model: Accurate predicts both the coculture growth in liquid phase and the gas composition changes in head space over time; Explicitly models the exchange of in situ produced O 2 and CO 2 within the coculture; Considers the self-shading effect on the growth of photoautotroph.

42 ENGINEERING↗
DOE OSTI2025

Feasibility of carbon foam-based sorbents for the abatement of gaseous mercury and iodine

The U.S. Department of Energy Hanford Site in Washington State is in the process of commissioning the Waste Treatment and Immobilization Plant to process a portion of the 54 million gallons of radioactive and chemical waste from cold war weapon production. Technologies for the capture of volatile species of concern are still being assessed, and new methods and materials are developed as operational and flowsheet mission risks are identified. One such area still being assessed is the abatement efficacy of the Carbon Adsorber units to retain gaseous mercury and 129 I released during processing. It is challenging to predict the mercury chemistry due to the variability of the feed, and different methods/materials are required for the capture of gaseous Hg 0 and Hg II compounds. In this study, the feasibility of using developmental carbon foam (CF) sorbents for the capture of iodine and mercury was assessed using static and dynamic flow testing and compared against a commercially available sorbent, BATII-37. Both CF and CF functionalized with bismuth particles (CF-Bi) chemisorbed iodine, and CF-Bi had similar mercury capture performance to BATII-37 in dynamic flow tests. While species loading concentrations were measurable, limitations in achieving a mass balance prevented a full evaluation of capture efficacy. Nonetheless, the results serve as an important first step in demonstrating the potential for simultaneous iodine and mercury capture.

Hanford site↗
DOE OSTI2025

Reward based optimization of resonance-enhanced piezoresponse spectroscopy

Dynamic spectroscopies in scanning probe microscopy (SPM) are critical for probing material properties, such as force interactions, mechanical properties, polarization switching, electrochemical reactions, and ionic dynamics. However, the practical implementation of these measurements is constrained by the need to balance imaging time and data quality. Signal to noise requirements favor long acquisition times and high frequencies to improve signal fidelity. However, these are limited on the low end by contact resonant frequency and photodiode sensitivity and on the high end by the time needed to acquire high-resolution spectra or the propensity for sample degradation under high field excitation over long times. The interdependence of key parameters such as instrument settings, acquisition times, and sampling rates makes manual tuning labor-intensive and highly dependent on user expertise, often yielding operator-dependent results. These limitations are prominent in techniques like dual amplitude resonance tracking in piezoresponse force microscopy that utilize multiple concurrent feedback loops for topography and resonance frequency tracking. Here, a reward-driven workflow is proposed that automates the tuning process, adapting experimental conditions in real time to optimize data quality. Furthermore, this approach significantly reduces the complexity and time required for manual adjustments and can be extended to other SPM spectroscopic methods, enhancing overall efficiency and reproducibility.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Characterizing Output Bottlenecks of a Production Supercomputer: Analysis and Implications

This article studies the I/O write behaviors of the Titan supercomputer and its Lustre parallel file stores under production load. The results can inform the design, deployment, and configuration of file systems along with the design of I/O software in the application, operating system, and adaptive I/O libraries.We propose a statistical benchmarking methodology to measure write performance across I/O configurations, hardware settings, and system conditions. Moreover, we introduce two relative measures to quantify the write-performance behaviors of hardware components under production load. In addition to designing experiments and benchmarking on Titan, we verify the experimental results on one real application and one real application I/O kernel, XGC and HACC IO, respectively. These two are representative and widely used to address the typical I/O behaviors of applications.In summary, we find that Titan’s I/O system is variable across the machine at fine time scales. This variability has two major implications. First, stragglers lessen the benefit of coupled I/O parallelism (striping). Peak median output bandwidths are obtained with parallel writes to many independent files, with no striping or write sharing of files across clients (compute nodes). I/O parallelism is most effective when the application—or its I/O libraries—distributes the I/O load so that each target stores files for multiple clients and each client writes files on multiple targets in a balanced way with minimal contention. Second, our results suggest that the potential benefit of dynamic adaptation is limited. In particular, it is not fruitful to attempt to identify “good locations” in the machine or in the file system: component performance is driven by transient load conditions and past performance is not a useful predictor of future performance. For example, we do not observe diurnal load patterns that are predictable.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Redox poise in R. rubrum phototrophic growth drives large-scale changes in macromolecular pathways

During photoheterotrophic growth on organic substrates, purple nonsulfur photosynthetic bacteria like Rhodospirillum rubrum can acquire electrons by multiple means, including oxidation of organic substrates, oxidation of inorganic electron donors (e.g., H 2 ), and by reverse electron flow from the photosynthetic electron transport chain. These electrons are stored as reduced electron-carrying cofactors (e.g., NAD(P)H and ferredoxin). The overall ratio of oxidized to reduced cofactors (e.g., NAD(P)+:NAD(P)H), or ’redox poise’, is difficult to understand or predict, as are the cellular processes for dissipating these reducing equivalents. Using physics-based models that capture mass action kinetics consistent with the thermodynamics of reactions and pathways, a range of redox conditions for heterophototrophic growth are evaluated, from conditions in which the NADP+/NADPH levels approach thermodynamic equilibrium to conditions in which the NADP+/NADPH ratio is far above the typical physiological values. Modeling predictions together with experimental measurements indicate that the redox poise of the cell results in large-scale changes in the activity of biosynthetic pathways and, thus, changes in cell macromolecule levels (DNA, RNA, proteins, and fatty acids). Furthermore, modeling predictions indicate that during phototrophic growth, reverse electron flow from the quinone pool is a minor contributor to the production of reduced cofactors (e.g., NAD(P)H) compared to other oxidative processes (H 2 and carbon substrate oxidation). Instead, the quinone pool primarily operates to aid ATP production. The high level of ATP, in turn, drives reduction processes even when NADPH levels are relatively low compared to NADP+ by coupling ATP hydrolysis to the reductive processes. The model, in agreement with experimental measurements of macromolecule ratios of cells growing on different carbon substrates, indicates that the dynamics of nucleotide versus lipid and protein production is likely a significant mechanism of balancing oxidation and reduction in the cell.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Redox Poise during Rhodospirillum rubrum Phototrophic Growth Drives Large-scale Changes in Macromolecular Synthesis Pathways

During photoheterotrophic growth on organic substrates, purple nonsulfur photosynthetic bacteria like Rhodospirillum rubrum can acquire electrons by multiple means, including oxidation of organic substrates, oxidation of inorganic electron donors (e.g., H2), and by reverse electron flow from the photosynthetic electron transport chain. These electrons are stored as reduced electron-carrying cofactors (e.g., NAD(P)H and ferredoxin). The overall ratio of oxidized to reduced cofactors (e.g., NAD(P)+:NAD(P)H), or ’redox poise’, is difficult to understand or predict, as are the cellular processes for dissipating these reducing equivalents. Using physics-based models that capture mass action kinetics consistent with the thermodynamics of reactions and pathways, a range of redox conditions for heterophototrophic growth are evaluated, from conditions in which the NADP+/NADPH levels approach thermodynamic equilibrium to conditions in which the NADP+/NADPH ratio is far above the typical physiological values. Modeling predictions together with experimental measurements indicate that the redox poise of the cell results in large-scale changes in the activity of biosynthetic pathways and, thus, changes in cell macromolecule levels (DNA, RNA, proteins, and fatty acids). Furthermore, modeling predictions indicate that during phototrophic growth, reverse electron flow from the quinone pool is a minor contributor to the production of reduced cofactors (e.g., NAD(P)H) compared to other oxidative processes (H2 and carbon substrate oxidation). Instead, the quinone pool primarily operates to aid ATP production. The high level of ATP, in turn, drives reduction processes even when NADPH levels are relatively low compared to NADP+ by coupling ATP hydrolysis to the reductive processes. The model, in agreement with experimental measurements of macromolecule ratios of cells growing on different carbon substrates, indicates that the dynamics of nucleotide versus lipid and protein production is likely a significant mechanism of balancing oxidation and reduction in the cell.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Coupling flux balance analysis with reactive transport modeling through machine learning for rapid and stable simulation of microbial metabolic switching

Integrating genome-scale metabolic networks with reactive transport models (RTMs) provides a detailed description of the dynamic changes in microbial growth and metabolism. Despite promising demonstrations in the past, computational inefficiency has been pointed out as a critical issue to overcome because it requires repeated application of linear programming (LP) to obtain flux balance analysis (FBA) solutions in every time step and spatial grid. To address this challenge, we propose a new simulation method where we train and validate artificial neural networks (ANNs) using randomly sampled FBA solutions and incorporate the resulting surrogate FBA model (represented as algebraic equations) into RTMs as source/sink terms. We demonstrate the efficiency of our method via a case study of Shewanella oneidensis MR-1. During aerobic growth on lactate, S. oneidensis produces metabolic byproducts (such as pyruvate and acetate), which are subsequently consumed as alternative carbon sources when the preferred nutrients are depleted. To effectively simulate these complex dynamics, we used a cybernetic approach that models metabolic switches as the outcome of dynamic competition among multiple growth options. In both zero-dimensional batch and one-dimensional column configurations, the ANN-based surrogate models achieved substantial reduction of computational time by several orders of magnitude compared to the original LP-based FBA models. Moreover, the ANN models produced robust solutions without any special measures to prevent numerical instability. These developments significantly promote our ability to utilize genome-scale networks in complex, multi-physics, and multi-dimensional ecosystem modeling.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Cyber-Physical Dynamic System (CPDS) Modeling for Frequency Regulation and AGC Services of Distributed Energy Resources

The substantial integration of renewable energy brings significant challenges to balance the system in real time because of the variability and intermittency of renewable power. For the reliable system operation, the frequency regulation service is used to stabilize the system frequency through automatically balancing the system generation and load. On one hand, with the substantially increasing deployment of renewable energy in electricity system, the requirement of frequency regulation (FR) services increases significantly. On the other hand, the current main resource of FR services, the controllable conventional generation, is continuously decreasing in the system generation mix. This means that in the future high renewable penetration power system, additional and alternative reliable FR services providers such as distributed energy storage (DES) resources should be explored. Although the capability of utility-scale energy storage to provide FR services has been demonstrated, the integrated control and dynamic modeling of distributed energy resource (DER) providing frequency regulation grid services has been rarely explored. There are several challenges to adopt DERs to provide reliable grid services as illustrated in FERC 755. First, the distributed installation of DES requires a comprehensive cyber-physical dynamic system (CPDS) modeling to fully consider the impacts of the communication latency variability on its real time FR provision capability. Unlike the conventional generators, there are two-layer communication between DERs and system operators which increase the communication delay. Second, unlike the conventional generators whose dynamic models have been comprehensively studied, the difference among individual DER components' power-dynamic characteristic brings challenges in the accurate dynamic AGC modeling of its power-frequency relationship. Third, the temporal dependent state of charge uncertainty of DERs challenges DERs' power and frequency regulation capacities scheduling in the look-ahead generation scheduling. Therefore, the aggregator should optimize the frequency regulation provision from individual DER in real time. To overcome these challenges, this project proposes a cyber-physical dynamic system (CPDS) model to handle the uncertainty of DERs two-layer communication latency and power dynamics. The variability of DERs' communication delay and dynamic constraints will be comprehensively modeled. The DERs' AGC model with communication delay is designed to validate DESs' frequency regulation services. Like current performance-based frequency regulation evaluation, the delivery of DERs' frequency regulation will be assessed through post-analysis of the actual AGC response with respect to the AGC control signal from system operators. Consequently, the reliability improvement with DERs providing reliable frequency regulation services can be evaluated from a comprehensive perspective considering all the dynamics of communication and power.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

A Frequency Control Method for Islanded Microgrids Using Energy Storage Systems

Islanded microgrids are vulnerable to frequency fluctuations due to the presence of low-inertia distributed energy resources (DERs). Moreover, implementation of both synchronous-based and inverter-based DERs with a significant difference in inertia leads to a power imbalance between generation and consumption during transients. This results in frequency variations which might have severe consequences such as blackouts. This paper develops a control scheme for battery energy storage systems (BESSs) to enhance the dynamic response of islanded microgrids by mitigating the frequency fluctuations. A piecewise linear-elliptic (PLE) droop characteristic is proposed and employed in BESS to achieve a faster power balance between generation and consumption during transients, resulting in enhanced frequency responses. Different case studies are carried out to validate the viability of the proposed approach in improving the dynamics of islanded microgrids.

Pilehvar, Mohsen S.↗
DOE OSTI2021

A system of shared autonomous vehicles for Chicago: Understanding the effects of geofencing the service

With autonomous vehicles (AVs) still in the testing phase, researchers and planners must resort to simulation techniques to explore possible futures regarding shared and automated mobility. An agent-based discrete-event transport simulator, POLARIS, is used in this study to simulate travel in the 20-county Chicago region with a shared AV (SAV) mobility option. Using this framework, the effect of an SAV fleet on system performance when constrained to serve within geofences is studied under four distinct scenarios: service restricted to the city, to the city plus suburban core, to the core plus exurban areas, and to the entire region — along with the choice of dynamic ridesharing (DRS) versus solo travel in an SAV. Results indicate that service areas need a balanced mix of trip generators and attractors, and an SAV fleet’s empty VMT (eVMT) can be noticeably reduced through suitable geofencing and DRS. Geofences can also help lower response times, reduce systemwide VMT across all modes, and ensure uniform access to SAVs. DRS is most useful in lowering VMT and %eVMT that arises from sprawled land development, but with insufficient demand to share rides, savings from the use of geofences is higher. Geofences targeting neighborhoods with high trip density bring about low response times and %eVMT, but fleet sizes in these regions need to be designed for uniformly low response times throughout a large region, as opposed to maximizing vehicle use in a 24-hour day.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

NSFnets (Navier-Stokes flow nets): Physics-informed neural networks for the incompressible Navier-Stokes equations

In the last 50 years there has been a tremendous progress in solving numerically the Navier-Stokes equations using finite differences, finite elements, spectral, and even meshless methods. Yet, in many real cases, we still cannot incorporate seamlessly (multi-fidelity) data into existing algorithms, and for industrial-complexity applications the mesh generation is time consuming and still an art. Moreover, solving ill-posed problems (e.g., lacking boundary conditions) or inverse problems is often prohibitively expensive and requires different formulations and new computer codes. Here, we employ physics-informed neural networks (PINNs), encoding the governing equations directly into the deep neural network via automatic differentiation, to overcome some of the aforementioned limitations for simulating incompressible laminar and turbulent flows. We develop the Navier-Stokes flow nets (NSFnets) by considering two different mathematical formulations of the Navier-Stokes equations: the velocity-pressure (VP) formulation and the vorticity-velocity (VV) formulation. Since this is a new approach, we first select some standard benchmark problems to assess the accuracy, convergence rate, computational cost and flexibility of NSFnets; analytical solutions and direct numerical simulation (DNS) databases provide proper initial and boundary conditions for the NSFnet simulations. The spatial and temporal coordinates are the inputs of the NSFnets, while the instantaneous velocity and pressure fields are the outputs for the VP-NSFnet, and the instantaneous velocity and vorticity fields are the outputs for the VV-NSFnet. This is unsupervised learning and, hence, no labeled data are required beyond boundary and initial conditions and the fluid properties. The residuals of the VP or VV governing equations, together with the initial and boundary conditions, are embedded into the loss function of the NSFnets. No data is provided for the pressure to the VP-NSFnet, which is a hidden state and is obtained via the incompressibility constraint without extra computational cost. Unlike the traditional numerical methods, NSFnets inherit the properties of neural networks (NNs), hence the total error is composed of the approximation, the optimization, and the generalization errors. Here, we empirically attempt to quantify these errors by varying the sampling (“residual”) points, the iterative solvers, and the size of the NN architecture. For the laminar flow solutions, we show that both the VP and the VV formulations are comparable in accuracy but their best performance corresponds to different NN architectures. The initial convergence rate is fast but the error eventually saturates to a plateau due to the dominance of the optimization error. For the turbulent channel flow, we show that NSFnets can sustain turbulence at , but due to expensive training we only consider part of the channel domain and enforce velocity boundary conditions on the subdomain boundaries provided by the DNS data base. We also perform a systematic study on the weights used in the loss function for balancing the data and physics components, and investigate a new way of computing the weights dynamically to accelerate training and enhance accuracy. In the last part, we demonstrate how NSFnets should be used in practice, namely for ill-posed problems with incomplete or noisy boundary conditions as well as for inverse problems. We obtain reasonably accurate solutions for such cases as well without the need to change the NSFnets and at the same computational cost as in the forward well-posed problems. As a result, we also present a simple example of transfer learning that will aid in accelerating the training of NSFnets for different parameter settings.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Reducing Communication Overhead in Federated Learning for Network Anomaly Detection with Adaptive Client Selection

Communication overhead in federated learning (FL) poses a significant challenge for network anomaly detection systems, where the myriad of client configurations and network conditions can severely impact system efficiency and detection accuracy. While existing approaches attempt to address this through individual optimization techniques, they often fail to maintain the delicate balance between reduced overhead and detection performance. This paper presents an adaptive FL framework that dynamically combines batch size optimization, client selection, and asynchronous updates to achieve efficient anomaly detection. Through extensive profiling and experimental analysis on two distinct datasets-UNSW-NBIS for general network traffic and ROAD for automotive networks-our framework reduces communication overhead by 97.6%; (from 700.0s to 16.8s) compared to synchronous baseline approaches while maintaining comparable detection accuracy (95.10%; vs. 95.12%;). Statistical validation using Mann-Whitney U test confirms significant improvements (p < 0.05) over existing FL approaches across both datasets, demonstrating the framework's adaptability to different network security contexts. Detailed profiling analysis reveals the efficiency gains through dramatic reductions in GPU operations and memory transfers while maintaining robust detection performance under varying client conditions.

Marfo, William [University of Texas at El Paso]↗
DOE OSTI2020

Clumped isotope constraints on changes in latest Pleistocene hydroclimate in the northwestern Great Basin: Lake Surprise, California

Abstract During the Last Glacial Maximum (LGM) and subsequent deglaciation, the Great Basin in the southwestern United States was covered by numerous extensive closed-basin lakes, in stark contrast with the predominately arid climate observed today. This transition from lakes in the Late Pleistocene to modern aridity implies large changes in the regional water balance. Whether these changes were driven by increased precipitation rates due to changes in atmospheric dynamics, decreased evaporation rates resulting from temperature depression and summer insolation changes, or some combination of the two remains uncertain. The factors contributing to these large-scale changes in hydroclimate are critical to resolve, given that this region is poised to undergo future anthropogenic-forced climate changes with large uncertainties in model simulations for the 21st century. Furthermore, there are ambiguous constraints on the magnitude and even the sign of changes in key hydroclimate variables between the Last Glacial Maximum and the present day in both proxy reconstructions and climate model analyses of the region. Here we report thermodynamically derived estimates of changes in temperature, precipitation, and evaporation rates, as well as the isotopic composition of lake water, using clumped isotope data from an ancient lake in the northwestern Great Basin, Lake Surprise (California). Compared to modern climate, mean annual air temperature at Lake Surprise was 4.7 °C lower during the Last Glacial Maximum, with decreased evaporation rates and similar precipitation rates to modern. During the mid-deglacial period, the growth of Lake Surprise implied that the lake hydrologic budget briefly departed from steady state. Our reconstructions indicate that this growth took place rapidly, while the subsequent lake regression took place over several thousand years. Using models for precipitation and evaporation constrained from clumped isotope results, we determine that the disappearance of Lake Surprise coincided with a moderate increase in lake temperature, along with increasing evaporation rates outpacing increasing precipitation rates. Concomitant analysis of proxy data and climate model simulations for the Last Glacial Maximum are used to provide a robust means to understand past climate change, and by extension, predict how current hydroclimates may respond to expected future climate forcings. We suggest that an expansion of this analysis to more basins across a larger spatial scale could provide valuable insight into proposed climate forcings, and aid in climate model process depiction. Ultimately, our analysis highlights the importance of temperature-driven evaporation as a mechanism for lake growth and retreat in this region.

Geology↗
DOE OSTI2022

How Can Construction Process Simulation Modeling Aid the Integration of Lean Principles in the Factory-Built Housing Industry?

New and existing factories that produce and deliver factory-built housing can benefit from construction process simulation modeling to explore the integration of Lean principles in their operations. Construction process simulation modeling provides digital or virtual recreations of the real-world factory environments to visualize, quantify, analyze, and optimize their underlying behavior, including factory productivity, material flow, labor dynamics, bottlenecks, and work scope. One of the key benefits of process simulation modeling is the ability to create and compare "what-if" scenarios, including integrating Lean principles such as reducing waste (for example, transportation, waiting), line balancing, and just-in-time concepts. In general, three process simulation methods are widely used: discrete event simulation (DES), agentbased modeling (ABM), and system dynamics (SD). Myriad process simulation software also is available, but depending on the industry, complexity of the system, and purposes of the simulation, some software might be more appropriate. Similar to how computer-aided design (CAD) software such as AutoCAD and Rhinoceros enable building design of modular or factory-built housing, process simulation modeling software such as jStrobe, ProModel, and AnyLogic can enable factory design of new and existing factories to deliver modular affordable housing at scale, as opposed to traditional site-built construction. Software with DES capabilities can help generate a process model that is a logical representation of resources and activities in a factory. Software with CAD-DES integration can leverage product-process data integration to help spatially visualize a DES model of the factory in the CAD environment. Software with multimethod simulation capabilities, widely used in the manufacturing industry, brings together DES, ABM, and SD in a single platform that allows visualization, quantification, analyses, and optimization at varying data fidelities. Near-real-time data from an existing factory can be directly plugged into multimethod simulation software so that the construction process simulation model is a near-accurate representation of the real-world factory conditions. This report provides insights into the use of simulation as an aid to integrate Lean concepts in factories, including guidelines for selecting the appropriate process simulation modeling method and software. These insights have been developed as part of ongoing process simulation modeling research, development, and demonstration projects at the U.S. Department of Housing and Urban Development, the U.S. Department of Energy, and the National Renewable Energy Laboratory focused on how process simulation models can enable better integration of resilience, energy efficiency, and low-carbon design strategies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Water-enhanced bifunctional metal-acid catalyst for C=C bond hydrogenation

Water-assisted proton shuttling can promote hydrogenation of polar functional groups, and it is generally believed that such an effect can be hardly applied to hydrogenation of C═C bonds due to the latter's weak interaction with water. Here, we report density functional theory calculations and metadynamics simulations, through which we show a dynamic bifunctional metal–acid site that can be transformed, when interacting with water, into an active configuration for unexpected water-enhanced proton shuttling to C═C bonds. In particular, we investigated B(OH)3 anchored to a Ni catalyst for hydrogenation of cyclohexene in an organic solvent, which showed in experiments an increased rate by 100 times when adding a small amount of water. Metadynamics simulations suggest that a B(OH)3–H2O cluster can form on Ni(111), which promotes the proton transfer in the first hydrogenation step, while the second hydrogenation is still driven by metal-mediated direct H-transfer. The recovery process of B(OH)3–H2O also involves a proton shuttling step. We find that the boric species on the surface serves as an electron reservoir and carries the negative charge to balance the positive charge in the proton transfer steps. This work thus provides fundamental insights into this dynamic transformation process of the metal–acid interface, which can in principle be applied to many other bifunctional systems for hydrogenating non-polar unsaturated groups by engineering the interfacial charge separation.

Sun, Shoutian↗