Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difficult”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A Sustainable Multi-Dimensional Printable Material

Polymeric materials are usually tailored for specific functionality. A single polymer exhibiting multiple simultaneous functionalities often requires intricate molecular architecture, which is difficult to manufacture at scale because of its complex synthesis routes. In this work, a facile, partly renewable composition—prepared via reactive melt processing—that induces tunable functionalities such as 3D printability, shape recovery, and self-healing while exhibiting satisfactory mechanical properties is reported. The system with a hydrogen-bonded 3D network consists of thermally reversible nano-scale agglomerates of sustainable, rigid phenolic oligomers and crystallizable flexible polymer. Local molecular mobility and temperature-dependent relaxation and recovery of the non-equilibrium networked states enable exploiting these simultaneous functionalities. Transitions involving solidification and structure stabilization at ambient temperature spanning several hours after preheating only at 70 °C directly contrast typical thermoplastic or thermoplastic elastomer behaviors. Results from this study can inform the design of future rheology modifiers and materials for soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Visualization of a Limonene Synthesis Metabolon Inside Living Bacteria by Hyperspectral SRS Microscopy

Abstract Monitoring biosynthesis activity at single‐cell level is key to metabolic engineering but is still difficult to achieve in a label‐free manner. Using hyperspectral stimulated Raman scattering imaging in the 670–900 cm −1 region, localized limonene synthesis are visualized inside engineered Escherichia coli . The colocalization of limonene and GFP‐fused limonene synthase is confirmed by co‐registered stimulated Raman scattering and two‐photon fluorescence images. The finding suggests a limonene synthesis metabolon with a polar distribution inside the cells. This finding expands the knowledge of de novo limonene biosynthesis in engineered bacteria and highlights the potential of SRS chemical imaging in metabolic engineering research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hierarchical Polyelemental Nanoparticles as Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions

Efficient electrocatalysts are critical in various clean energy conversion and storage systems. Polyelemental nanomaterials are attractive as multi-functional catalysts due to their wide compositions and synergistic properties. However, controlled synthesis of polyelemental nanomaterials is difficult due to their complex composition. Herein, we present a one-step synthetic strategy to fabricate a hierarchical polyelemental nanomaterial, which contains ultrasmall precious metal nanoparticles (IrPt, ~5 nm) anchored on spinel-structure transition metal oxide nanoparticles. The polyelemental nanoparticles serve as excellent bifunctional catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The mass catalytic activity of the polyelemental nanoparticles is 7-times higher than that of Pt in ORR and 28-times that of Ir in OER at the same overpotentials, demonstrating the high activity of the bifunctional electrocatalyst. We attribute this outstanding performance to the controlled multiple elemental composition, mixed chemical states, and large electroactive surface area. The hierarchical nanostructure and polyelemental design of these nanoparticles offers a general and powerful alternative material for catalysis, solar cells, and more.

25 ENERGY STORAGE↗
DOE OSTI2021

Unlocking the Electrochemical–Mechanical Coupling Behaviors of Dendrite Growth and Crack Propagation in All-Solid-State Batteries

Dendrite growth and crack propagation are two major hurdles on the road towards the large-scale commercialization of lithium metal all-solid-state batteries (ASSBs). Due to the high multiphysics coupled nature of the underlying dendrite growth mechanism, understanding it has been difficult. Herein, for the first time, an electrochemical-mechanical model is established that directly couples dendrite growth and crack propagation from a physics-based perspective at the cell level. Results reveal that overpotential-driven stress propels a crack to penetrate through the solid electrolyte, creating vacancies for dendrite growth, leading to the short circuit of the battery. Thus, high lithiation/charging rate and low conductivity of electrolytes can accelerate the electrochemical failure of the battery. It is further discovered that Young's modulus E LLZO of the electrolyte has competing contributions to the fracture and dendrite growth; specifically, when E LLZO = 40-100 GPa, the short circuit is triggered early. A larger toughness value hinders the crack propagation and mitigates the Li dendrite growth. The developed multiphysics model provides an in-depth understanding of the coupling of crack propagation and dendrite growth within ASSBs and an insightful mechanistic design guidance map for robust and safe ASSB cells.

25 ENERGY STORAGE↗
DOE OSTI2022

Disorder Dynamics in Battery Nanoparticles During Phase Transitions Revealed by Operando Single-Particle Diffraction

Structural and ion-ordering phase transitions limit the viability of sodium-ion intercalation materials in grid scale battery storage by reducing their lifetime. However, the combination of phenomena in nanoparticulate electrodes creates complex behavior that is difficult to investigate, especially on the single-nanoparticle scale under operating conditions. In this work, operando single-particle X-ray diffraction (oSP-XRD) is used to observe single-particle rotation, interlayer spacing, and layer misorientation in a functional sodium-ion battery. oSP-XRD is applied to Na 2/3 [Ni 1/3 Mn 2/3 ]O 2 , an archetypal P2-type sodium-ion-positive electrode material with the notorious P2-O2 phase transition induced by sodium (de)intercalation. Here, it is found that during sodium extraction, the misorientation of crystalline layers inside individual particles increases before the layers suddenly align just prior to the P2-O2 transition. The increase in the long-range order coincides with an additional voltage plateau signifying a phase transition prior to the P2-O2 transition. To explain the layer alignment, a model for the phase evolution is proposed that includes a transition from localized to correlated Jahn-Teller distortions. The model is anticipated to guide further characterization and engineering of sodium-ion intercalation materials with P2-O2 type transitions. oSP-XRD, therefore, opens a powerful avenue for revealing complex phase behavior in heterogeneous nanoparticulate systems.

25 ENERGY STORAGE↗
DOE OSTI2022

An Investigation of Chemo-Mechanical Phenomena and Li Metal Penetration in All-Solid-State Lithium Metal Batteries Using In Situ Optical Curvature Measurements

Solid-electrolytes (SEs) can provide a pathway to increase energy-density in lithium metal batteries. However, lithium metal penetration through garnet based LLZO solid electrolytes has been identified as a critical failure process. This phenomenon is related to chemo-mechanical processes which are difficult to probe. In particular, characterizing the dynamic mechanical deformations that occur in electrode-SE structures is very challenging. Here study reports in situ curvature measurements that are thus designed to probe chemo-mechanical phenomena that occur during lithium plating. The novel experimental cell configuration created for this work shows that pressure builds up in the Li metal during plating, up until the point where short circuits occur. The resulting data are analyzed with a detailed finite element model (FEM) to quantitatively evaluate stress evolution. The results show that Li metal plating within a surface flaw can produce stress build-up prior to short-circuiting. The combined results from both the experiments and the FEM suggest that it is critical to minimize surface defects and flaws during the manufacturing processes.

25 ENERGY STORAGE↗
DOE OSTI2023

Linking Phase Behavior to Performance Parameters in Non-Fullerene Acceptor Solar Cells

Performance of nonfullerene-based organic solar cells is largely dependent on the donor:acceptor blend morphology, which is initially tuned by composition. However, morphological design rules are difficult to identify due to the complex relationship between composition-dependent phase behavior and performance properties. In this study, the authors are able to establish a direct link between PM6:Y6 film morphology and device properties by combining grazing-incidence wide-angle X-ray scattering with highly sensitive Fourier transform photocurrent spectroscopy. By analyzing properties across the full composition range, interfacial microstructure and the corresponding charge transfer (CT) states are identified and direct structure–property relationships are established. Here the results indicate that open-circuit voltage is controlled by the CT state at amorphous-PM6:crystalline-Y6 interfaces. Crystalline Y6 is found to increase both transport and non-radiative recombination, suggesting that morphological tradeoffs may be necessary for overall device optimization.

14 SOLAR ENERGY↗
DOE OSTI2023

3D-Printed Graded Electrode with Ultrahigh MnO 2 Loading for Non-Aqueous Electrochemical Energy Storage

Electrolytic manganese dioxide is one of the promising cathode candidates for electrochemical energy storage devices due to its high redox capacity and ease of synthesis. Yet, high-loading MnO 2 often suffers from sluggish reaction kinetics, especially in non-aqueous electrolytes. The non-uniform deposition of MnO 2 on a porous current collectors also makes it difficult to fully utilize the active materials at high mass loading. Here, a 3D printed graded graphene aerogel (3D GA) that contains sparsely separated exterior ligaments is developed to create large open channels for mass transport as well as densely arranged interior ligaments providing large ion-accessible active surface. The unique structural design homogenizes the thickness of electro deposited MnO 2 even at an ultrahigh mass loading of ≈70 mg cm -2 . The electrode achieves a remarkable volumetric capacity of 29.1 mA h cm -3 in the non-aqueous electrolyte. A Li-ion hybrid capacitor device assembled with a graded 3D GA/MnO2 cathode and graded 3D GA/VO x anode exhibits a wide voltage window of 0–4 V and a superior volumetric energy density of 20.2 W h L -1 . The findings offer guidance on 3D printed electrode design for supporting ultrahigh loading of active materials and developments of high energy density energy storage devices.

electrochemical energy storage↗
DOE OSTI2024

Transient Chemo‐Mechanical Model of Lithium Plating Impacted by External Pressure

Abstract Lithium anodes show great promise in commercial applications, but are hindered by lithium plating and dendrite growth which cause safety concerns during long‐term cell operation. Stack pressure is experimentally observed to improve cell lifetime; however, the relationship between stress and lithium deposition has remained difficult to elucidate. In this work, a transient, 3D, finite‐element model of the evolution of a lithium anode due to stripping and plating is developed. The evolution of a microscale protrusion on the anode surface is tracked over one charge‐discharge cycle with respect to stack pressure and lithium yield strength. Lithium plastic deformation, nonconformal anode‐separator contact, and separator porosity effects are accounted for. Over the course of several hours of stripping/plating, the anode surface evolves to a similar morphology under pressure regardless of the initial conditions due to lithium plastic deformation and hardening. The rate of this evolution highly depends on the applied pressure and assumed lithium yield strength.

25 ENERGY STORAGE↗
DOE OSTI2020

A life cycle analysis (LCA) primer for the agricultural community

Consumer demand for sustainably produced agricultural products is increasing. One approach that can be used to evaluate and compare product sustainability is to conduct a life cycle analysis (LCA). The term LCA is broadly used to describe a suite of analytical resources and standardized methods. Life cycle analyses are a transdisciplinary tool which can and are used by all professions but work best when conducted by teams with diverse skills and backgrounds. The objective of this paper is to provide a primer on LCAs for the agricultural community and for LCA practitioners unfamiliar with agronomy. Agricultural LCAs can differ greatly because agricultural products have multiple end uses, complex socio-economic and environmental trade-offs, and can be generated using a variety of different practices, resources, and production systems. Through worldwide agricultural marketing, intricate agronomic supply chains and support systems have been developed to produce, store, and distribute agricultural products. In many situations, the production practices are not linked to the products consumers purchase. This limitation can be partially overcome by conducting an LCA, which is a systematic summation of the multiple environmental impacts associated with the production, use, and disposal of a product. However, the large number and types of analyses can make it difficult for non-practitioners and decision-makers to use and interpret LCA results. Finally, it is important for members of the agricultural community to be aware of these analyses and how they can be used and how they affect product markets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Reformulation of dicamba herbicide: Impacts on offsite transport and soybean damage

Abstract The herbicide dicamba (3,6‐dichloro‐2‐methoxybenzoic acid) is commonly used to control broadleaf weeds in soybeans. Dicamba, however, is susceptible to volatilization and drift, thereby causing significant plant damage to nontarget crops downwind. Dicamba was reformulated to reduce volatility and off‐target movement. The effectiveness of the dicamba reformulation was assessed by quantifying dicamba emissions following spray application and investigated how meteorological factors influenced the off‐target movement. The experiments were conducted at the University of Minnesota Agricultural Experiment Station (UMORE Park) during the growing season of 2018, 2019, 2021, and 2022. Multiple high‐flow polyurethane foam air samplers were used to measure dicamba concentrations downwind from a 4‐ha soybean field sprayed with dicamba. Dicamba emissions were estimated using backward Lagrangian modeling constrained by the air sample observations. The results indicate that dicamba emissions and downwind transport were significant for several days following application. Further, non‐traited soybeans located within 15–45 m showed substantial dicamba‐related damage. In warmer, drier seasons, increased dicamba emissions caused more severe damage to downwind soybeans, likely worsened by drought stress preventing recovery. Favorable atmospheric conditions that reduced potential drift can be difficult to achieve in terms of the typical weather experienced over agricultural sites in the Upper Midwest. These results indicate that the dicamba reformulation has not adequately prevented significant post‐spray volatilization losses and downwind transport.

Agriculture↗
DOE OSTI2023

Information Processing Capacity of Spintronic Oscillator

Physical reservoir computing is a framework that enables energy‐efficient information processing by using physical systems. Nonlinear dynamics in physical systems provide a computational capability that is unique to reservoirs. It is, however, difficult to find an appropriate task for a reservoir because of the complexity of nonlinear information processing. The information processing capacity has recently been used to clarify systematically the tasks that are solved by reservoirs; it quantifies the memory capacity of reservoirs in accordance with the order of nonlinearity. Herein, an experimental evaluation of the information processing capacity of a spintronic oscillator consisting of nanostructured ferromagnets is reported. The spintronic reservoir state is electrically manipulated by adding a delayed‐feedback circuit. The total capacity reaches a maximum of 5.6 at the edge of the echo state property. A trade‐off between the linear and nonlinear components of the capacity is also found. The result can be used to better understand the nonlinear information processing in reservoirs and to find good matches between reservoirs and tasks. As an example, a function‐approximation task is performed and it is found that it can be efficiently solved when the reservoir state is appropriately tuned so that its information processing capacity matches that of the task.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

The scaling economics of small unit operations

We present a correlation that represents the capital costs of the components of even very small modular facilities. Conversion of distributed feedstocks (eg, associated natural gas, biomass, and carbonaceous wastes) could provide a small fraction of the liquid fuels now used for transportation in the U.S. (~6%),or nearly half of the chemical products now made from petroleum. However, those resources tend to be available at small geographically distributed sites, and they are difficult or expensive to transport to a distant processing center. Modular, and likely intensified, processes that can be numbered up promise to enable utilizing such distributed resources. Early stage economics evaluation of those processes requires cost estimates for the components, which are likely smaller in scale than can be accommodated by the 0.6 power law typically used in chemical engineering

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

A review of artificial intelligence applications in manufacturing operations

Abstract Artificial intelligence (AI) and machine learning (ML) can improve manufacturing efficiency, productivity, and sustainability. However, using AI in manufacturing also presents several challenges, including issues with data acquisition and management, human resources, infrastructure, as well as security risks, trust, and implementation challenges. For example, getting the data needed to train AI models can be difficult for rare events or costly for large datasets that need labeling. AI models can also pose security risks when integrated into industrial control systems. In addition, some industry players may be hesitant to use AI due to a lack of trust or understanding of how it works. Despite these challenges, AI has the potential to be extremely helpful in manufacturing, particularly in applications such as predictive maintenance, quality assurance, and process optimization. It is important to consider the specific needs and capabilities of each manufacturing scenario when deciding whether and how to use AI in manufacturing. This review identifies current developments, challenges, and future directions in AI/ML relevant to manufacturing, with the goal of improving understanding of AI/ML technologies available for solving manufacturing problems, providing decision‐support for prioritizing and selecting appropriate AI/ML technologies, and identifying areas where further research can yield transformational returns for the industry. Early experience suggests that AI/ML can have significant cost and efficiency benefits in manufacturing, especially when combined with the ability to capture enormous amounts of data from manufacturing systems.

Plathottam, Siby Jose↗
DOE OSTI2020

An Atomic View of Cation Diffusion Pathways from Single‐Crystal Topochemical Transformations

Abstract The diffusion pathways of Li‐ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li‐ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li‐ion diffusion at the atomistic level. Here, by using topochemical Li‐ion insertion and extraction to induce single‐crystal‐to‐single‐crystal transformations in a tunnel‐structured V 2 O 5 polymorph, coupled with operando powder X‐ray diffraction, we leverage single‐crystal X‐ray diffraction to identify the sequence of lattice interstitial sites preferred by Li‐ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li‐ions in this cathode material in kinetic states and provide an experimentally validated angstrom‐level 3D picture of atomic pathways thus far only conjectured through DFT calculations.

Handy, Joseph V.↗
DOE OSTI2020

Single‐Atom Electrocatalysts from Multivariate Metal–Organic Frameworks for Highly Selective Reduction of CO 2 at Low Pressures

Abstract Single‐atom catalysts (SACs) are of great interest because of their ultrahigh activity and selectivity. However, it is difficult to construct model SACs according to a general synthetic method, and therefore, discerning differences in activity of diverse single‐atom catalysts is not straightforward. Herein, a general strategy for synthesis of single‐atom metals implanted in N‐doped carbon (M 1 ‐N‐C; M=Fe, Co, Ni and Cu) has been developed starting from multivariate metal–organic frameworks (MOFs). The M 1 ‐N‐C catalysts, featuring identical chemical environments and supports, provided an ideal platform for differentiating the activity of single‐atom metal species. When employed in electrocatalytic CO 2 reduction, Ni 1 ‐N‐C exhibited a very high CO Faradaic efficiency (FE) up to 96.8 % that far surpassed Fe 1 ‐, Co 1 ‐ and Cu 1 ‐N‐C. Remarkably, the best‐performer, Ni 1 ‐N‐C, even demonstrated excellent CO FE at low CO 2 pressures, thereby representing a promising opportunity for the direct use of dilute CO 2 feedstock.

Jiao, Long↗
DOE OSTI2020

Encoding Multilayer Complexity in Anti‐Counterfeiting Heterometallic MOF‐Based Optical Tags

Abstract Optical tags provide a way to quickly and unambiguously identify valuable assets. Current tag fluorophore options lack the tunability to allow combined methods of encoding in a single material. Herein we report a design strategy to encode multilayer complexity in a family of heterometallic rare‐earth metal–organic frameworks based on highly connected nonanuclear clusters. To impart both intricacy and security, a synergistic approach was implemented resulting in both overt (visible) and covert (near‐infrared, NIR) properties, with concomitant multi‐emissive spectra and tunable luminescence lifetimes. Tag authentication is validated with a variety of orthogonal detection methodologies. Importantly, the effect induced by subtle compositional changes on intermetallic energy transfer, and thus on the resulting photophysical properties, is demonstrated. This strategy can be widely implemented to create a large library of highly complex, difficult‐to‐counterfeit optical tags.

Deneff, Jacob I.↗