Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “design space approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Simulation of Wind Profile Perturbations for Launch Vehicle Ascent Flight Systems Design Assessments

Ideally, a statistically representative sample of measured high-resolution wind profiles with wavelengths as small as tens of meters is required for assessment of launch vehicle ascent flight systems component capability and vehicle operability for a selected launch site. At most potential launch sites a sample of high-resolution measured wind profiles may not exist. Representative samples of Rawinsonde wind profiles are more likely to be available because of the extensive network of measurement sites established for routine measurements at 12-hr intervals in support of national and international weather observing and forecasting activity. Such a sample, although large enough to statistically represent relatively large wavelength perturbations, would be inadequate for launch system design assessment applications because the Rawinsonde system can accurately measure wind perturbations with wavelengths no smaller than 2000m (1000m altitude increment). Wavelengths less than 2000m in the raw Rawinsonde data, which tend to be dominated by un-damped spurious balloon motion and radar tracking system noise, are filtered within the data processing scheme. The Kennedy Space Center (KSC) Jimsphere wind profiles (150/month and seasonal pairs) are the only adequate high resolution (approximately 150 to 300m effective resolution, but over-sampled at 25m intervals) data that have been used extensively in launch vehicle design, operability assessments and operational protection of vehicle systems for wind perturbation uncertainty. Jimsphere wind profiles have been measured at a few other potential launch sites but the number of profiles is relatively small and the samples are not statistically representative of the site dependent wind profile variability. A simulation process has been developed for enhancement of measured low-resolution Rawinsonde profiles that are more likely to be available in the vicinity of potential launch sites and are a statistically representative sample of wind profile perturbation wavelengths greater than 2000m. The enhancement produces perturbed wind profiles with wavelengths as small as desired for application in launch vehicle ascent flight simulations and design assessments.

Adelfang, S. I.↗

A high-temperature furnace for applications in microgravity

Technology in the area of material processing and crystal growth has been greatly furthered by research in microgravity environments. The role of efficient, lightweight furnaces with reliable performance is crucial in these experiments. A need exists for the development of a readily duplicated, high-temperature furnace satisfying stringent weight, volume, and power constraints. A furnace was designed and is referred to as the UAH SHIELD. Stringent physical and operating characteristics for the system were specified, including a maximum weight of 20 kg, a maximum power requirement of 60 W, and a volume of the furnace assembly, excluding the batteries, limited to half a Get-Away-Special canister. The UAH SHIELD furnace uses radiation shield and vacuum technology applied in the form of a series of concentric cylinders enclosed on either end with disks. Thermal testing of a furnace prototype was performed in addition to some thermal and structural analysis. Results indicate the need for spacing of the shields to accommodate the thermal expansion during furnace operation. In addition, a power dissipation of approximately 100 W and system weight of approximately 30 kg was found for the current design.

Source record↗

Space Telescope design for maintenance

The Space Telescope is the first free-flying spacecraft designed to be serviced and repaired by EVA astronauts performing in-orbit maintenance tasks necessary to replace failed or worn-out components. The Telescope's operational profile anticipates in-orbit maintenance approximately two and one half years after initial launch, spacecraft return to ground after five years, and relaunch about one year later. Component design for in-orbit maintenance is being verified by 1-G and neutral buoyancy simulation techniques. Skylab experience led to the implementation of this approach which has significant economic benefits compared to 'one-time-use' space hardware.

Field, E. L.↗

Semigroup approximation and robust stabilization of distributed parameter systems

Theoretical results that enable rigorous statements of convergence and exponential stability of Galerkin approximations of LQR controls for infinite dimensional, or distributed parameter, systems have proliferated over the past ten years. In addition, extensive progress has been made over the same time period in the derivation of robust control design strategies for finite dimensional systems. However, the study of the convergence of robust finite dimensional controllers to robust controllers for infinite dimensional systems remains an active area of research. We consider a class of soft-constrained differential games evolving in a Hilbert space. Under certain conditions, a saddle point control can be given in feedback form in terms of a solution to a Riccati equation. By considering a related LQR problem, we can show a convergence result for finite dimensional approximations of this differential game. This yields a computational algorithm for the feedback gain that can be derived from similar strategies employed in infinite dimensional LQR control design problems. The approach described in this paper also inherits the additional properties of stability robustness common to game theoretic methods in finite dimensional analysis. These theoretical convergence and stability results are verified in several numerical experiments.

Kurdila, A. J.↗

Design of robust state feedback controllers via eigenvalue/eigenvector assignment

A new method of selecting a multivariable state feedback controller is presented. The resulting controller simultaneously realizes arbitrary closed-loop eigenvalues, approximates specified modal behavior and achieves low eigensystem sensitivity with respect to plant parameter variations. The method characterizes a vector space slightly larger than the null space of the closed-loop system matrix and projects a desired modal matrix onto this space. Sensitivity of eigenvalues and eigenvectors is then minimized local to the desired modal matrix using a gradient search technique. A tutorial example to illustrate the design procedure is given.

Mielke, R. R.↗

Lightweight tire concept for space shuttle

Various tests were conducted on a 49x17/26 PR aircraft tire that had been designed as a lightweight tire for use on the C-5A military transport. This tire is approximately 25 per cent lighter than a tire of the same size and ply rating that would be used in commercial airline service. The tires were tested at 40 per cent, 37 per cent, and 35 per cent deflections. These deflections were obtained by adjusting the inflation pressure while the load on the tire remained constant at 60,000 pounds. It was determined that the tire would operate successfully under the test conditions at 35% deflection. Prior to testing, the tires were subjected to conditions of high vacuum and low temperature. It was determined that the tires were not adversely affected by these conditions.

Shufflebotham, W. T.↗

Electronic structure study of TiB{sub 2} and Ti{sub 2}B

In this paper, the electronic properties of TiB{sub 2} and Ti{sub 2}B are computed within the framework of Density Functional Theory (DFT) based on Linear Combination of Atomic Orbitals (LCAO) method. In the present calculations, the generalized gradient approximation (GGA) proposed by Perdew-Burke-Erenzerhof (PBE) and Becke’s scheme are considered to treat the correlation and exchange effects respectively. TiB{sub 2} crystallizes in the hexagonal AlB{sub 2} type structure which is designated as C32 with the space group P6/mmm. While the crystal structure of Ti{sub 2}B described in this paper is isomorphous to the body centered tetragonal (Al{sub 2}Cu - type) structure with space group I4/mcm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Estimation of mean rain rate - Application to satellite observations

A method for the estimation of the mean area average rain rate from dependent data is developed and applied to the GARP Atlantic Tropical Experiment data. The method consists of fitting a mixed distribution, containing an atom at zero, by minimum chi-square in combination with certain time-space sampling designs. In modeling the continuous component of the mixed distribution, it is shown that the lognormal distribution provides a very close fit for the nonzero area average rainrates. A comparison with the gamma distribution shows that the lognormal distribution is a better choice as expressed by the minimum chi-square criterion. Some of the time-space sampling designs correspond to satellite sampling. The results indicate that a satellite visiting an area of about 350 x 350 sq km in the tropics approximately every 10 hours over a period can provide a rather close estimate for the mean area average rain rate.

Kedem, Benjamin↗

Rapid Development of the Seeker Free-Flying Inspector Guidance, Navigation, and Control System

Seeker is an automated extravehicular free-flying inspector CubeSat designed and built in-house at the Johnson Space Center (JSC). As a Class 1E project funded by the International Space Station (ISS) Program, Seeker had a stream-lined process to flight certification, but the vehicle had to be designed, developed, tested, and delivered within approximately one year after authority to proceed (ATP) and within a $1.8 million budget. These constraints necessitated an expedited Guidance, Navigation, and Control (GNC) development schedule. Development began with a navigation sensor trade study using Linear Covariance (LinCov) analysis and a rapid sensor down-selection process, resulting in the use of commercial off-the-shelf (COTS) sensors which could be procured quickly and subjected to in-house environmental testing to qualify them for flight. A neural network was used to enable a COTS camera to provide bearing measure-ments for visual navigation. The GNC flight software (FSW) algorithms utilized lean development practices and leveraged the Core Flight Software (CFS) architecture to rapidly develop the GNC system, tune the system parameters, and verify performance in simulation. This pace was anchored by several Hardware-Software Integration (HSI) milestones, which forced the Seeker GNC team to develop the interfaces both between hardware and software and between the GNC domains early in the project and to enable a timely delivery.

Sullivan, Jake↗

Active sample acquisition system for micro-penetrators

This paper summarizes the design and development of a sub-surface sample acquisition system for use in micro-penetrators. The system was developed for flight use under NASA's New Millennium Program, Deep Space 2 project. The system goal is to acquire approximately 100 mg of Martian sub-surface soil and return it to the inside of the micro-penetrator for analysis to determine the presence of water. Various passive and active sampling techniques that were tested during the development cycle are described. After significant testing, a side bore drill mechanism was chosen to be developed for use in the flight penetrators. The design, development, and testing of mechanism element are outlined, with particular emphasis placed on actuator development, drill stem design, impact testing, and mechanism testing in various soil types. The other system elements, a pyrotechnically actuated door mechanism to seal the sample and an impact restraint mechanism, are also described.

Voorhees, Chris↗

Composite tubes for the Space Station truss structure

The reference configuration of NASA's Space Station includes a large truss structure to support the various modules and solar arrays. This truss structure will be constructed from tubular members approximately 2 in. in diameter and up to 23 ft in length. The important design considerations for this structure are light weight, high stiffness, dimensional stability, and long-term durability. Continuous graphite fiber reinforced polymer matrix composite materials can meet the structural requirements, and are leading candidates for the tubular truss members. However, there are concerns regarding the durability of composites during the long-term exposure to atomic oxygen and thermal cycling that will be encountered during the Space Station service life. This paper discusses space environmental factors and their effect on composite materials, and provides estimates of the changes in mechanical and thermal properties of composites exposed to long-term Space Station conditions. The effect of low velocity impact and handling damage on composite tube properties is also discussed.

Bowles, David E.↗

Performance and endurance tests of a laboratory model multipropellant resistojet

This paper presents the results of an effort to demonstrate the technological readiness of a long-life multipropellant resistojet for Space Station auxiliary propulsion. A laboratory model resistojet made from grain-stabilized platinum served as a test bed to evaluate the design characteristics, fabrication methods, and operating strategies for an engineering model multipropellant resistojet developed as part of the NASA Space Station propulsion system Advanced Development Program. The laboratory model thruster was characterized for performance on a variety of fluids expected to be available onboard a Space Station, then subjected to a 2000-h, 2400-thermal-cycle endurance test using carbon dioxide propellant. Maximum thruster temperatures were approximately 1400 C. Significant observations from the laboratory model thruster performance and endurance tests are discussed as they relate to the design of the engineering model thruster.

Morren, W. Earl↗

Lunar Surface Access Module Descent Engine Turbopump Technology: Detailed Design

The need for a high specific impulse LOX/LH2 pump-fed lunar lander engine has been established by NASA for the new lunar exploration architecture. Studies indicate that a 4-engine cluster in the thrust range of 9,000-lbf each is a candidate configuration for the main propulsion of the manned lunar lander vehicle. The lander descent engine will be required to perform multiple burns including the powered descent onto the lunar surface. In order to achieve the wide range of thrust required, the engines must be capable of throttling approximately 10:1. Working under internal research and development funding, NASA Marshall Space Flight Center (MSFC) has been conducting the development of a 9,000-lbf LOX/LH2 lunar lander descent engine technology testbed. This paper highlights the detailed design and analysis efforts to develop the lander engine Fuel Turbopump (FTP) whose operating speeds range from 30,000-rpm to 100,000-rpm. The capability of the FTP to operate across this wide range of speeds imposes several structural and dynamic challenges, and the small size of the FTP creates scaling and manufacturing challenges that are also addressed in this paper.

Alvarez, Erika↗

Zero-Boiloff Cryogenic Storage Cryocooler Integration Test

Developments in NASA Glenn Research Center's Centaur work have led to an exciting new cryogenic storage concept being considered for future NASA space missions. With long-duration cryogenic storage, propellants will boil off because of the environmental heating of the tank. To accommodate these losses, extra propellant is required along with larger propellant tanks. Analyses of space transportation concepts show that spacetransfer cryogenic stages with the zero boiloff (ZBO) cryogenic storage concept reduce the stage mass for missions longer than approximately 45 days in low Earth orbit. The ZBO system consists of an active cryocooling system using a cryocooler in addition to traditional passive thermal insulation. Engineers at Glenn analyzed, designed, built, and bench tested a heat exchanger and integration hardware for a large-scale ZBO demonstration for the NASA Marshall Space Flight Center. The heat exchanger, which transfers the heat that enters the tank from the fluid to the cryocooler, must limit the temperature difference across it to limit the cryocooler size and power requirements. With a low temperature difference, the system efficiency is improved. For that temperature difference to be reduced, the thermal conductivity must be as high as possible at liquid hydrogen temperatures, around 25 K (-248 C). In addition, it is important for the heat exchanger to be welded to a stainless steel flange and have enough strength to accommodate piping stress. High-conductivity copper was selected and fabricated, then integrated with the stainless steel piping tee as shown in the cutaway representation. Literature showed that this conductivity might range from 2 to 100 W/cm/K but that is was likely to be around 13 W/cm/K. Unexpectedly, this conductivity was measured to be 23 W/cm/K, which limited the temperature increase along the heat exchanger to just 2 K. This limited temperature increase, compared with the predicted difference of 3.5 K, improves the overall system efficiency by 7.4 percent and limits the expected integration losses to a projected 4 percent with a flight design for liquid hydrogen storage. These results improve the cryocooler integration concept by allowing the cryocooler to operate at a lower input power, or by potentially permitting a smaller cryocooler to be selected.

Plachta, David W.↗

Hydrogen Energy Storage Integrated with a Combined Cycle Plant

A project is being developed that will build upon the existing infrastructure and resources at the Intermountain Power Project (IPP) site to provide reliable, dispatchable energy and to support the transmission of renewable energy resources while transitioning to an economical green energy future. The concept study depicted in this report outlines a techno-economic optimization to fulfill the demand for 30% vol hydrogen co-firing in the IPP 840 MW advanced class combined cycle power plant. In an initial step, a site assessment concluded the site has sufficient land available to co-locate a hydrogen production and storage facility. The team evaluated and defined a scalable concept that considered technology characteristics, including input and output models to be used for optimization purposes. The concept for the hydrogen production and storage system integrates multiple technologies, to determine system size and scalable approach, for each of the technologies evaluated, the team defined component and subcomponent sizes, minimum and maximum capacity, modularity, component utility consumption (electric, water), component flexibility and servicing, layout, and technology status, as well as technology alternatives. For hydrogen generation, the project considers Siemens Energy’s Silyzer-300 (S300) technology, a 17.5 MW modular Proton Exchange Membrane (PEM) electrolyzer. For the S300 configuration, the team determined that three S300 arrays, or approximately 1,000 kg/hr, per block would yield a compact block design. This configuration results in a fairly wide and flexible arrangement that fits well into the spaces available at the site. Therefore, the overall design approach is based on multiple identical blocks of 3 arrays to minimize engineering cost and optimize constructability. In parallel, a transmission screening study was conducted to determine any potential transmission constraints from the energy sources that could feed the hydrogen production equipment. The study results show that minimum transmission constraints would be encountered to deliver 400 MW renewable generation from southern California, or south-central Wyoming. At last, the techno-economic analysis concluded that a scenario that uses solar and wind power yields the lowest levelized cost of hydrogen (LCOH 2 ) production and the lowest cost per tonne of CO 2 reduced. In this optimized scenario, the hydrogen production plant was determined as 6,201 kg/hr and the hydrogen storage (underground cavern) was determined as 4,600 tonnes. The resulting capacity factor for the hydrogen production plant was 66.33% with 8,745 operating hours in one year. This techno-economic analysis provided various options for integrating hydrogen storage at the Intermountain Power Plant site to co-fire the CCPP units. The results provide insightful data about the magnitude of capacity needed and the economics of producing hydrogen and reducing CO 2 emissions.

08 HYDROGEN↗

The eXtended virtual element method for elliptic problems with weakly singular solutions

This paper introduces a novel eXtended virtual element method, an extension of the conforming virtual element method. The X-VEM is formulated by incorporating appropriate enrichment functions in the local spaces. The method is designed to handle highly generic enrichment functions, including singularities arising from fractured domains. By achieving consistency on the enrichment space, the method is proven to achieve arbitrary approximation orders even in the presence of singular solutions. The paper includes a complete convergence analysis under general assumptions on mesh regularity, and numerical experiments validating the method’s accuracy on various mesh families, demonstrating optimal convergence rates in the L 2 - and H 1 - norms on fractured or L-shaped domains.

97 MATHEMATICS AND COMPUTING↗

Evaluation of materials for high performance solar arrays

A program has been underway to evaluate materials for advanced solar arrays which are required to provide power to weight ratios up to 100 W/kg. Severe mission environments together with the lack of knowledge of space environmental materials degradation rates require the generation of irradiation and outgassing engineering data for use in the initial design phase of the flight solar arrays. Therefore, approximately 25 candidate array materials were subjected to selected mission environments of vacuum, UV, and particle irradiation, and their mechanical and/or optical properties were determined where appropriate.

Whitaker, A. F.↗

Flutter suppression control law synthesis for the Active Flexible Wing model

The Active Flexible Wing Project is a collaborative effort between the NASA Langley Research Center and Rockwell International. The objectives are the validation of methodologies associated with mathematical modeling, flutter suppression control law development and digital implementation of the control system for application to flexible aircraft. A flutter suppression control law synthesis for this project is described. The state-space mathematical model used for the synthesis included ten flexible modes, four control surface modes and rational function approximation of the doublet-lattice unsteady aerodynamics. The design steps involved developing the full-order optimal control laws, reducing the order of the control law, and optimizing the reduced-order control law in both the continuous and the discrete domains to minimize stochastic response. System robustness was improved using singular value constraints. An 8th order robust control law was designed to increase the symmetric flutter dynamic pressure by 100 percent. Preliminary results are provided and experiences gained are discussed.

Mukhopadhyay, Vivek↗