SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Equatorial airglow and the ionospheric geomagnetic anomaly.

Ogo 4 observations of the O I (6300-A) emissions have revealed a global pattern hitherto undetected from the ground-based observations. It is seen that the postsunset emission of O I (6300 A) in October 1967 is very asymmetrical with respect to the geomagnetic equator in certain longitude regions and shows poor correlation with the electron density measured simultaneously from the same spacecraft. This asymmetry is less marked in the UV airglow, O I (1356 A), which appears to vary as the square of the maximum electron density in the F region. The horizon scan data of the 6300-A airglow reveal that the latitudinal asymmetry is associated with asymmetry in the height of the O I (6300-A) emission and hence with the altitude of the F2 peak. From the correlative studies of the airglow and the ionospheric measurements the mechanisms of the UV and the 6300 A emissions are discussed in terms of the processes involving radiative and dissociative recombination. Theoretical expressions are developed which relate the airglow data to the ionospheric parameters.

Chandra, S.↗

NASA NTRS1994

Gopher Tortoise (Gopherus polyphemus) Densities in Coastal Scrub and Slash Pine Flatwoods in Florida

Densities of gopher tortoises were compared with habitat characteristics in scrub and in flatwood habitats on the Kennedy Space Center, Florida. Tortoises were distributed widely among habitat types and did not have higher densities in well-drained (oak-palmetto) than in poorly-drained (saw palmetto) habitats. Fall densities of tortoises ranged from a mean of 2.7 individuals/ha in disturbed habitat to 0.0 individuals/ha in saw palmetto habitat. Spring densities of tortoises ranged from a mean of 2.5 individuals/ha in saw palmetto habitat to 0.7 individuals/ha in oak-palmetto habitat. Densities of tortoises were correlated positively with the percent herbaceous cover, an indicator of food resources. Plots were divided into three burn classes; these were areas burned within three years, burned four to seven years, and unburned for more than seven years prior to the study. Relationships between densities of tortoises and time-since-fire classes were inconsistent.

Breininger, David R.↗

NASA NTRS1961

Sound Pressures and Correlations of Noise on the Fuselage of a Jet Aircraft in Flight

Tests were conducted at altitudes of 10,000, 20,000, and 30,000 feet at speeds of Mach 0.4, 0.6, and O.8. It was found that the sound pressure levels on the aft fuselage of a jet aircraft in flight can be estimated using an equation involving the true airspeed and the free air density. The cross-correlation coefficient over a spacing of 2.5 feet was generalized with Strouhal number. The spectrum of the noise in flight is comparatively flat up to 10,000 cycles per second.

Shattuck, Russell D.↗

NASA NTRS1999

A Diagnostic Analysis of the Kennedy Space Center LDAR Network

The performance characteristics of the Kennedy Space Center Lightning Detection and Ranging (LDAR) network are investigated at medium-far range (50-300 km). A 19 month noise-filtered sample of LDAR observations is examined, from which it is determined that the "climatological" VHF source density as observed by LDAR falls off approximately 10 dB every 71 km of ground range from the network centroid. The underlying vertical distribution of LDAR sources is approximately normally distributed with a mean of 9 km and a standard deviation of 2.7 km, implying that loss of below-horizon sources has a negligible effect on column-integrated source densities within 200 km ground range. At medium to far ranges, location errors are primarily radial and have a slightly asymmetric distribution whose first moment increases as r(exp 2). A range calibration derived from these results is used to normalize source density maps on monthly, daily and hourly time scales and yields significant improvements in correlation with NLDN ground strike densities.

Boccippio, Dennis J.↗

NASA NTRS2001

Solar Wind Influence on the Oxygen Content of Ion Outflow in the High-Altitude Polar Cap During Solar Minimum Conditions

We correlate solar wind and interplanetary magnetic field (IMF) properties with the properties of O(+) and H(+) during early 1996 (solar minimum) at altitudes between 5.5 and 8.9 R(sub E) geocentric using the Thermal Ion Dynamics Experiment (TIDE) on the Polar satellite. Throughout the high-altitude polar cap we observe H(+) to be more abundant than O(+). O(+) is found to be more abundant at lower latitudes when the solar wind speed is low (and Kp is low), while at higher solar wind speeds (and high Kp), O(+) is observed across most of the polar cap. The O(+) density and parallel flux are well organized by solar wind dynamic pressure, both increasing with solar wind dynamic pressure. Both the O(+) density and parallel flux have positive correlations with both V(sub SW)B(sub IMF) and E(sub SW). No correlation is found between O(+) density and IMF Bz, although a nonlinear relationship with IMF By is observed, possibly due to a strong linear correlation with the dynamic pressure. H(+) is not as highly correlated with solar wind and IMF parameters, although H(+) density and parallel flux are negatively correlated with IMF By and positively correlated with both V(sub SW)B(sub IMF) and E(sub SW). In this solar minimum data set, H(+) is dominant, so that contributions of this plasma to the plasma sheet would have very low O(+) to H(+) ratios.

Elliott, H. A.↗

NASA NTRS1994

Thermally induced damage in composite space structure: Predictive methodology and experimental correlation

A general analysis method is presented to predict matrix cracks in all plies of a composite laminate, and resulting degraded laminate properties, as functions of temperature or thermal cycles. A shear lag solution of the stresses in the vicinity of cracks and a fracture mechanics crack formation criteria are used to predict cracks. Damage is modeled incrementally, which allows the inclusion of the effects of temperature dependent material properties and softening of the laminate due to previous cracking. The analysis is incorporated into an easy-to-use computer program. The analysis is correlated with experimentally measured crack densities in a variety of laminates exposed to monotonically decreasing temperatures. Crack densities are measured at the edges of specimens by microscopic inspection, and throughout the specimen volumes by x-ray and sanding down of the edges. Correlation between the analytical results and the crack densities in the interiors of the specimens was quite good. Crack densities measured at specimen edges did not agree with internal crack densities (or analyses) in some cases. A free-edge stress analysis clarified the reasons for these discrepancies.

Park, Cecelia↗

NASA NTRS2006

Electron Velocity Distribution Function in Magnetic Clouds in the Solar Wind

We present a study of the kinetic properties of the electron velocity distribution functions within magnetic clouds, since they are the dominant thermal component. The study is based on high time resolution data from the GSFC WIND/SWE electron spectrometer and the Berkeley 3DP electron plasma instruments. Recent studies on magnetic clouds have shown observational evidence of anti-correlation between the total electron density and electron temperature, which suggest a polytrope law P(sub e) = alpha(Nu(sub e) (sup gamma)) for electrons with the constant gamma approximates 0.5 < 1. This anti-correlation and small polytropic gamma-values is interpreted in the context of the presence of highly non-Maxwellian electron distributions (i.e. non-thermal) within magnetic clouds. These works suggested that the non-thermal electrons can contribute as much as 50% of the total electron pressure within magnetic clouds. We have revisited some of the magnetic cloud events previously studied and attempted to quantify the nature of the non-thermal electrons by modeling the electron velocity distribution function using a kappa distribution function to characterize the kinetic non-thermal effects. If non-thermal tail effects are the source for the anti-correlation between the moment electron temperature and density and if the kappa distribution is a reasonable representative model of non-thermal effects, then the electron velocity distribution within magnetic clouds should show indication for small K-values when gamma < 1.

Nieves-Chinchil, Teresa↗

NASA NTRS1991

He(2+) and H(+) dynamics in the subsolar magnetosheath and plasma depletion layer

A magnetosheath interval monitored by a pair of close upstream spacecraft is analyzed. Composition measurements are used to determine separately many of the properties of H(+) and He(2+) in the magnetosheath, plasma depletion layer, and accelerated flow layer. Magnetosheath ion densities and density ratios are well correlated with those in the upstream and on average the He(2+)/H(+) temperature ratio remains constant across the shock. Temperatures decrease and anisotropies increase as the magnetosheath plasma is lost parallel to the magnetic field in the depletion layer. Compared to the magnetosheath, there is a 20-30-percent enhancement in the depletion layer He(2+)/H(+) density ratio and an enhancement in the depletion layer temperature ratio. By monitoring upstream conditions, a methodology is developed for studying the plasma depletion layer and magnetosheath separately.

Fuselier, S. A.↗

NASA NTRS2004

Further Progress in Noise Source Identification in High Speed Jets via Causality Principle

To locate noise sources in high-speed jets, the sound pressure fluctuations p/, measured at far field locations, were correlated with each of density p, axial velocity u, radial velocity v, puu and pvv fluctuations measured from various points in fully expanded, unheated plumes of Mach number 0.95, 1.4 and 1.8. The velocity and density fluctuations were measured simultaneously using a recently developed, non-intrusive, point measurement technique based on molecular Rayleigh scattering (Seasholtz, Panda, and Elam, AIAA Paper 2002-0827). The technique uses a continuous wave, narrow line-width laser, Fabry-Perot interferometer and photon counting electronics. The far field sound pressure fluctuations at 30 to the jet axis provided the highest correlation coefficients with all flow variables. The correlation coefficients decreased sharply with increased microphone polar angle, and beyond about 60 all correlation mostly fell below the experimental noise floor. Among all correlations < puu; p/> showed the highest values. Interestingly, , in all respects, were very similar to . The and correlations with 90deg microphone fell below the noise floor. By moving the laser probe at various locations in the jet it was found that the strongest noise source lies downstream of the end of the potential core and extends many diameters beyond. Correlation measurement from the lip shear layer showed a Mach number dependency. While significant correlations were measured in Mach 1.8 jet, values were mostly below the noise floor for subsonic Mach 0.95 jet. Various additional analyses showed that fluctuations from large organized structures mostly contributed to the measured correlation, while that from small scale structures fell below the noise floor.

Panda, J.↗

NASA NTRS1994

Soft X-ray and H I surveys of the low N(sub H) region in Ursa Major

A region of almost 300 deg squared in Ursa Major around the direction of the lowest neutral hydrogen column density in the sky has been surveyed in the 1/4 keV X-ray band (approximately 0.12 to 0.284 keV at 10% of the peak response) using the ROSAT position sensitive proportional counter (PSPC) and has been fully mapped in the 21 cm line of neutral hydrogen with an angular resolution of 21' or better. We present maps of these two data sets and an analysis of the spatial correlation between them. Over the entire field, the 1/4 keV band X-ray count rate shows a strong negative correlation with the column density of Galactic neutral hydrogen. We discuss the local, extragalactic, and halo contributions to the observed diffuse X-ray intensity and derive an upper limit to the Galactic X-ray emission originating beyond this H I distribution that is more than a factor of 7 smaller than the inferred flux beyond the Draco nebula, an apparent halo object located approximately 41 degs away. This implies that while there may be significant amounts of hot gas in the Galactic halo, its properties must vary strongly across the sky.

Snowden, S. L.↗

NASA NTRS1969

Self-consistent many-electron theory of electron work functions and surface potential characteristics for selected metals

Electron work functions, surface potentials, and electron number density distributions and electric fields in the surface region of 26 metals were calculated from first principles within the free electron model. Calculation proceeded from an expression of the total energy as a functional of the electron number density, including exchange and correlation energies, as well as a first inhomogeneity term. The self-consistent solution was obtained via a variational procedure. Surface barriers were due principally to many-body effects; dipole barriers were small only for some alkali metals, becoming quite large for the transition metals. Surface energies were inadequately described by this model, which neglects atomistic effects. Reasonable results were obtained for electron work functions and surface potential characteristics, maximum electron densities varying by a factor of over 60.

Smith, J. R.↗

NASA NTRS2002

The Neutral Gas Desorption and Breakdown on a Metal-Dielectric Junction Immersed in a Plasma

New results are presented of an experimental study and theoretical analysis of arcing on metal-dielectric junctions immersed in a low-density plasma. Two samples of conventional solar arrays have been used to investigate the effects of arcing within a wide range of neutral gas pressures, ion currents, and electron number densities. All data (except video) were obtained in digital form that allowed us to study the correlation between external parameters (plasma density, additional capacitance, bias voltage, etc) and arc characteristics (arc rate, arc current pulse width and amplitude, gas species partial pressures, intensities of spectral lines, and so on). Arc sites were determined by employing a video-camera, and it is shown that the most probable sites for arc inception are trip le-junctions, even though some arcs were initiated in gaps between cells. The effect of surface conditioning (decrease of arc rate due to outgassing) was clearly demonstrated. Moreover, a considerable increase in arc rate due to absorption of molecules from atmospheric air has been confirmed. The analysis of optical spectra (240-800 nm) reveals intense narrow atomic lines (Ag, H) and wide molecular bands (OH, CH, SiH, SiN) that confirm a complicated mechanism of arc plasma generation. The rate of plasma contamination due to arcing was measured by employing a mass-spectrometer. These measurements provided quite reliable data for the development of a theoretical model of plasma contamination, In conclusion, the arc threshold was increased to above 350 V (from 190 V) by keeping a sample in vacuum (20 micronTorr) for seven days. The results obtained are important for the understanding of the arc inception mechanism, which is absolutely essential for progress toward the design of high voltage solar arrays for space applications.

Vayner, Boris↗

NASA NTRS2021

A Low-Memory Spectral-Correlation Analyzer for Digital QAM-SRRC Waveforms

Cyclostationary signal processing (CSP) provides the ability to estimate received waveforms' statistical features blindly. Quadrature amplitude modulated (QAM) waveforms, when filtered by the square-root-raised cosine (SRRC) pulse shape function, have cyclic features that CSP can exploit to detect waveform parameters such as symbol rate (SR) and center frequency (CF). The estimation of these SR-CF pairs enables a cognitive radio (CR) to perform spectrum sensing techniques such as spectrum sharing and interference mitigation. Here, we investigate a field-programmable gate array (FPGA) application of a blind symbol rate-center frequency estimator. First, this study provides a background on the theory behind the cyclic spectral density function (CSD), spectral correlation analyzers (SCA), and spectrum sensing. Following this is a discussion on the motivation for CubeSat spectrum sensing. An SCA implementation for low-memory devices, such as FPGA-based CubeSat, is then describes. The paper concludes by reporting the performance characteristics of the newly developed streaming-based SCA.

FPGA↗

NASA NTRS1982

Coronal closed structures. IV - Hydrodynamical stability and response to heating perturbations

The response of magnetically confined atmospheres to perturbations in the temperature and density distribution, and the local heating rate by means of a one-dimensional time-dependent hydrodynamical code, which incorporates the full energy, momentum and mass conservation equations is studied. These studies extend the linear instability analysis of Habbal and Rosner (1979) into the finite-amplitude regime, and generalize the confined atmosphere models of Serio et al., to the time-dependent domain. The results show that closed coronal atmospheres are stable against finite-amplitude perturbations if the chromospheric response is taken into account; and observed correlated increases in coronal density and temperature can only be achieved under quiescent conditions by increasing the heat deposition rate relatively more in the chromosphere than in the corona.

Peres, G.↗

NASA NTRS2020

Reconstruction of Historical Surface Mass Balance, 1984–2017 from GreenTrACS Multi-offset Ground-penetrating Radar

We present continuous estimates of snow and firn density, layer depth and accumulation from a multi-channel, multi-offset, ground-penetrating radar traverse. Our method uses the electromagnetic velocity, estimated from waveform travel-times measured at common-midpoints between sources and receivers. Previously, common-midpoint radar experiments on ice sheets have been limited to point observations. We completed radar velocity analysis in the upper ~2 m to estimate the surface and average snow density of the Greenland Ice Sheet. We parameterized the Herron and Langway (1980) firn density and age model using the radar-derived snow density, radar-derived surface mass balance (2015–2017) and reanalysis-derived temperature data. We applied structure-oriented filtering to the radar image along constant age horizons and increased the depth at which horizons could be reliably interpreted. We reconstructed the historical instantaneous surface mass balance, which we averaged into annual and multidecadal products along a 78 km traverse for the period 1984–2017. We found good agreement between our physically constrained parameterization and a firn core collected from the dry snow accumulation zone, and gained insights into the spatial correlation of surface snow density.

glacier geophysics↗

NASA NTRS2001

Computed Tomography Support for Microgravity Materials Science Experiments

The accurate measurement of density in both liquid and solid samples is of considerable interest to Principal Investigators with materials science experiments slated for the ISS. The work to be described is an innovative application of a conventional industrial nondestructive evaluation instrument. Traditional applications of industrial computed tomography (CT) rely on reconstructing cross sections of large structures to provide two-dimensional planar views which can identify defects such as porosity, or other material anomalies. This has been done on microgravity materials science experiments to check the integrity of ampoule-cartridge assemblies for safety purposes. With a substantially monoenergetic flux, as can be obtained with a radioactive cobalt source, there will be a direct correlation between absorption and density. Under such conditions it then becomes possible to make accurate measurements of density throughout a sample, and even when the sample itself is enclosed within a furnace and a safety required cartridge. Such a system has been installed at Kennedy Space Center (KSC) and is available to PIs to examine samples before and after flight. The CT system is being used to provide density information for two purposes. Firstly, the determination of density changes from liquid to solid is vital information to the PI for purposes of modeling the solidification behavior of his sample, and to engineers who have to design containment ampoules and must allow for shrinkage and other volume changes that may occur during processing. While such information can be obtained by pycnometric measurements, the possibility of using a furnace installed on the CT system enables one to examine potentially dangerous materials having high vapor pressures, while not needing visible access to the material. In addition, uniform temperature can readily be obtained, and the system can be controlled to ramp up, hold, and ramp down while collecting data over a wide range of parameters automatically. Results of initial tests on low melting point elements such as gallium, indium and tin will be presented, and the intent is to proceed to compounds such as InSb, HgCdTe and CdTe. Alloys such as Pb-Sb (PI - Poirier, U AZ) and Cu-Al (PI - Trivedi, Ames Lab.), which are the subjects of flight experiments, will also be examined. The second application is the conversion of measured density values directly to composition. This was successfully done with the mercury cadmium telluride alloys grown on the second and fourth United States Microgravity Payload (USMP-2 and USMP-4) missions by Lehoczky. CdTe values along the length of the boules were obtained at KSC prior to cutting the sample, and could have been obtained prior to its removal from the cartridge and ampoule. Examples of the data obtained will be shown. It is anticipated that several of the materials science PIs will avail themselves of the technique described, initially for determining densities prior to flight, and then to acquire early quantitative data on the compositional variation within their samples.

Gillies, Donald C.↗

NASA NTRS1985

Modelling of ionospheric temperature profiles

Ionosphere electron temperature data gathered by the AE-C, AEROS, Isis-1 and -2 spacecraft are employed to define linear models for the average conditions. Account is taken of evidence for seasonal, altitudinal, solar activity and density-temperature effects. Notably, use is made of the high negative correlations between the electron temperature and density, thereby allowing either to be calculated if data are available on the density.

Bilitza, D.↗

NASA NTRS1992

Suitability of silica aerogel as a capture medium for interplanetary dust

Impact experiments using silica aerogel as a deceleration and capture medium for interplanetary dust are reported. A rough correlation is noted between increasing particle track lengths and decreasing aerogel density, and there is a poor correlation of track lengths with impact velocity at laboratory attainable velocities of 5-7 km/s. It is concluded that aerogel track lengths should not be used as velocity indicators. Chemical analyses are also reported of aerogel samples used in this study in order to assess the risks concerning contamination of interplanetary dust particles by the silica aerogel capture medium. It is demonstrated that this material is impressively clean.

Barrett, R. A.↗