Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cooperative control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Accurate State Estimation and Tracking of a Non-Cooperative Target Vehicle

Autonomous space rendezvous scenarios require knowledge of the target vehicle state in order to safely dock with the chaser vehicle. Ideally, the target vehicle state information is derived from telemetered data, or with the use of known tracking points on the target vehicle. However, if the target vehicle is non-cooperative and does not have the ability to maintain attitude control, or transmit attitude knowledge, the docking becomes more challenging. This work presents a nonlinear approach for estimating the body rates of a non-cooperative target vehicle, and coupling this estimation to a tracking control scheme. The approach is tested with the robotic servicing mission concept for the Hubble Space Telescope (HST). Such a mission would not only require estimates of the HST attitude and rates, but also precision control to achieve the desired rate and maintain the orientation to successfully dock with HST.

Thienel, Julie K.↗
NASA NTRS2006

Accurate State Estimation and Tracking of a Non-Cooperative Target Vehicle

Autonomous space rendezvous scenarios require knowledge of the target vehicle state in order to safely dock with the chaser vehicle. Ideally, the target vehicle state information is derived from telemetered data, or with the use of known tracking points on the target vehicle. However, if the target vehicle is non-cooperative and does not have the ability to maintain attitude control, or transmit attitude knowledge, the docking becomes more challenging. This work presents a nonlinear approach for estimating the body rates of a non-cooperative target vehicle, and coupling this estimation to a tracking control scheme. The approach is tested with the robotic servicing mission concept for the Hubble Space Telescope (HST). Such a mission would not only require estimates of the HST attitude and rates, but also precision control to achieve the desired rate and maintain the orientation to successfully dock with HST.

Thienel, Julie K.↗
NASA NTRS2004

Reliable and Affordable Control Systems Active Combustor Pattern Factor Control

Active, closed-loop control of combustor pattern factor is a cooperative effort between Honeywell (formerly AlliedSignal) Engines and Systems and the NASA Glenn Research Center to reduce emissions and turbine-stator vane temperature variations, thereby enhancing engine performance and life, and reducing direct operating costs. Total fuel flow supplied to the engine is established by the speed/power control, but the distribution to individual atomizers will be controlled by the Active Combustor Pattern Factor Control (ACPFC). This system consist of three major components: multiple, thin-film sensors located on the turbine-stator vanes; fuel-flow modulators for individual atomizers; and control logic and algorithms within the electronic control.

McCarty, Bob↗
NASA NTRS1990

Design of Sensors for Control of Closed Loop Life Support Systems

A brief summary is presented of a Engineering Design sequence, a cooperation between NASA-Kennedy and the University of Florida on the Controlled Environmental Life Support System (CELSS) program. Part of the class was devoted to learning general principles and techniques of design. The next portion of the class was devoted to learning to design, actually fabricating and testing small components and subsystems of a CELSS.

Source record↗
NASA NTRS1990

Launching AI in NASA ground systems

This paper will discuss recent operational successes in implementing expert systems to support the complex functions of NASA mission control systems at the Goddard Space Flight Center, including fault detection and diagnosis for real time and engineering analysis functions in the Cosmic Background Explorer and Gamma Ray Observatory missions and automation of resource planning and scheduling functions for various missions. It will also discuss ongoing developments and prototypes that will lead to increasingly sophisticated applications of artificial intelligence. These include the use of neural networks to perform telemetry monitoring functions, the implementation of generic expert system shells that can be customized to telemetry handling functions specific to NASA control centers, the applications of AI in training and user support, the long-term potential of implementing systems based around distributed, cooperative problem solving, and the use of AI to control and assist system development activities.

Perkins, Dorothy C.↗
NASA NTRS2008

Control Architecture for Robotic Agent Command and Sensing

Control Architecture for Robotic Agent Command and Sensing (CARACaS) is a recent product of a continuing effort to develop architectures for controlling either a single autonomous robotic vehicle or multiple cooperating but otherwise autonomous robotic vehicles. CARACaS is potentially applicable to diverse robotic systems that could include aircraft, spacecraft, ground vehicles, surface water vessels, and/or underwater vessels. CARACaS incudes an integral combination of three coupled agents: a dynamic planning engine, a behavior engine, and a perception engine. The perception and dynamic planning en - gines are also coupled with a memory in the form of a world model. CARACaS is intended to satisfy the need for two major capabilities essential for proper functioning of an autonomous robotic system: a capability for deterministic reaction to unanticipated occurrences and a capability for re-planning in the face of changing goals, conditions, or resources. The behavior engine incorporates the multi-agent control architecture, called CAMPOUT, described in An Architecture for Controlling Multiple Robots (NPO-30345), NASA Tech Briefs, Vol. 28, No. 11 (November 2004), page 65. CAMPOUT is used to develop behavior-composition and -coordination mechanisms. Real-time process algebra operators are used to compose a behavior network for any given mission scenario. These operators afford a capability for producing a formally correct kernel of behaviors that guarantee predictable performance. By use of a method based on multi-objective decision theory (MODT), recommendations from multiple behaviors are combined to form a set of control actions that represents their consensus. In this approach, all behaviors contribute simultaneously to the control of the robotic system in a cooperative rather than a competitive manner. This approach guarantees a solution that is good enough with respect to resolution of complex, possibly conflicting goals within the constraints of the mission to be accomplished by the vehicle(s).

Huntsberger, Terrance↗
NASA NTRS1991

ALLY: An operator's associate for satellite ground control systems

The key characteristics of an intelligent advisory system is explored. A central feature is that human-machine cooperation should be based on a metaphor of human-to-human cooperation. ALLY, a computer-based operator's associate which is based on a preliminary theory of human-to-human cooperation, is discussed. ALLY assists the operator in carrying out the supervisory control functions for a simulated NASA ground control system. Experimental evaluation of ALLY indicates that operators using ALLY performed at least as well as they did when using a human associate and in some cases even better.

Bushman, J. B.↗
NASA NTRS1980

Thrust augmented spin recovery device

Yaw control surfaces were developed for a jet propelled aircraft. A thrust augmented rudder is disposed above the jet exhaust stream and a thrust rudder tab extends downward into the jet exhaust stream. These components are cooperatively deflected to generate yawing moments for directional control of the aircraft.

Berrier, B. L.↗
NASA NTRSDate not supplied

Integrating Upper Class E Traffic Management (ETM) Operations into the National Airspace System: Use Cases and Research Questions

As new categories of vehicles are introduced in the National Airspace System, so too are novel concepts for a cooperative approach to traffic management environments. One of these new environments, Upper Class E Traffic Management (ETM), is expected to include a variety of high altitude, long endurance vehicles with a range of performance capabilities and mission profiles that operate in cooperative areas above 60,000 feet. In addition to developing the rules, architecture, and systems for operations within the ETM environment itself, it is also important to consider how ETM vehicles will integrate with traditional Air Traffic Management and interact with Air Traffic Control (ATC) as they traverse ATC-controlled airspace and transition in and out of cooperative ETM operating areas. As a first step toward future ETM demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center’s Airspace Operations Laboratory, use cases with step-by-step procedures were developed to identify both nominal and off-nominal scenarios in which ETM operations will interact with ATC. As NASA prepares to develop a simulation platform to demonstrate ETM cooperative practices and ETM-ATC interactions, the procedures, ATC roles and responsibilities, data exchange requirements, and research questions that were identified as part of use case development will inform scenario and system architecture design. The upcoming simulation work will include initial prototype ETM-ATC coordination tools to support ATC controllers’ interactions with ETM operations. This paper will briefly discuss NASA’s upcoming ETM development work and then provide background on ETM-ATC interactions, describe each ETM-ATC interaction use case, and discuss open questions on concept, procedures, and assumptions.

ATC↗
NASA NTRSDate not supplied

Integrating Upper Class E Traffic Management (ETM) Operations into the National Airspace System: Use Cases and Research Questions

As new categories of vehicles are introduced in the National Airspace System, so too are novel concepts for a cooperative approach to traffic management environments. One of these new environments, Upper Class E Traffic Management (ETM), is expected to include a variety of high altitude, long endurance vehicles with a range of performance capabilities and mission profiles that operate in cooperative areas above 60,000 feet. In addition to developing the rules, architecture, and systems for operations within the ETM environment itself, it is also important to consider how ETM vehicles will integrate with traditional Air Traffic Management and interact with Air Traffic Control (ATC) as they traverse ATC-controlled airspace and transition in and out of cooperative ETM operating areas. As a first step toward future ETM demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center’s Airspace Operations Laboratory, use cases with step-by-step procedures were developed to identify both nominal and off-nominal scenarios in which ETM operations will interact with ATC. As NASA prepares to develop a simulation platform to demonstrate ETM cooperative practices and ETM-ATC interactions, the procedures, ATC roles and responsibilities, data exchange requirements, and research questions that were identified as part of use case development will inform scenario and system architecture design. The upcoming simulation work will include initial prototype ETM-ATC coordination tools to support ATC controllers’ interactions with ETM operations. This paper will briefly discuss NASA’s upcoming ETM development work and then provide background on ETM-ATC interactions, describe each ETM-ATC interaction use case, and discuss open questions on concept, procedures, and assumptions.

ATC↗
NASA NTRS1990

Advances in dynamics and control of flexible spacecraft and space-based manipulations; Proceedings of the Symposium, ASME Winter Annual Meeting, Dallas, TX, Nov. 25-30, 1990

Consideration is given to control formulations for vibration suppression of an active structure in slewing motions, the use if distributed sensing in control of large flexible spacecraft, an improved shooting method for solving minimum-time maneuver problems, and nonlinear slew maneuver dynamics of large flexible spacecrafts. Attention is also given to initial experiments in trusterless locomotion control of a free-flying robot, dynamic analysis to evaluate viscoelastic passive damping augmentation for the Space Shuttle Remote Manipulator System, initial experiments in cooperative manipulation from a moving platform, and intelligent pipelined control architecture for remote robotic applications.

Joshi, Suresh M.↗
NASA NTRS1983

NASA/RAE collaboration on nonlinear control using the F-8C digital fly-by-wire aircraft

A cooperative advanced digital research experiment (CADRE) was established by the National Aeronautics and Space Administration (NASA) and the Royal Aircraft Establishment (RAE), in which nonlinear control algorithms developed by the RAE were tested on the F-8C digital fly-by-wire (DFBW) aircraft based at the Dryden Flight Research Facility. In the initial phase of the collaboration, some variable-gain algorithms, referred to collectively as variable integral control to optimize response (VICTOR) algorithms, were fight tested. With VICTOR, various measures available within the control system are used to vary gains and time-constants within the closed loop and thereby enhance the control capability of the system, while reducing the adverse effects of sensor noise on the control surfaces. A review of design procedures for VICTOR and results of preliminary flight tests are presented. the F-8C aircraft is operated in the remotely augmented vehicle (RAV) mode, with the control laws implemented as FORTRAN programs on a ground-based computer. Pilot commands and sensor information are telemetered to the ground, where the data are processed to form surface commands which are then telemetered to the ground, where the data are processed to form surface commands which are then telemetered back to the aircraft. The RAV mode represents a single-string (simplex) system and is therefore vulnerable to a hardover since comparison monitoring is not possible. Hence, extensive error checking is conducted on both the ground and airborne computers to prevent the development of potentially hazardous situations. Experience with the RAV monitoring and validation procedures is described.

Butler, G. F.↗
NASA NTRS1994

Commercialization of JPL Virtual Reality calibration and redundant manipulator control technologies

Within NASA's recent thrust for industrial collaboration, JPL (Jet Propulsion Laboratory) has recently established two technology cooperation agreements in the robotics area: one on virtual reality (VR) calibration with Deneb Robotics, Inc., and the other on redundant manipulator control with Robotics Research Corporation (RRC). These technology transfer cooperation tasks will enable both Deneb and RRC to commercialize enhanced versions of their products that will greatly benefit both space and terrestrial telerobotic applications.

Kim, Won S.↗
NASA NTRS1995

Design, analysis, and control of a large transport aircraft utilizing selective engine thrust as a backup system for the primary flight control

A study has been conducted to determine the capability to control a very large transport airplane with engine thrust. This study consisted of the design of an 800-passenger airplane with a range of 5000 nautical miles design and evaluation of a flight control system, and design and piloted simulation evaluation of a thrust-only backup flight control system. Location of the four wing-mounted engines was varied to optimize the propulsive control capability, and the time constant of the engine response was studied. The goal was to provide level 1 flying qualities. The engine location and engine time constant did not have a large effect on the control capability. The airplane design did meet level 1 flying qualities based on frequencies, damping ratios, and time constants in the longitudinal and lateral-directional modes. Project pilots consistently rated the flying qualities as either level 1 or level 2 based on Cooper-Harper ratings. However, because of the limited control forces and moments, the airplane design fell short of meeting the time required to achieve a 30 deg bank and the time required to respond a control input.

Gerren, Donna S.↗
NASA NTRS2022

Conflict Resolution Strategies for Balloon-Airship Encounters in Upper Class E Air Traffic Management (ETM)

This paper examines strategic conflict resolution strategies for pair-wise high-altitude balloon, airship encounters. By strategic is meant that the conflict is identified (detected) at the time of flight plan submission or flight plan alteration through a service, such as an ETM Service Supplier (ESS). We investigate optimal control solutions for two classes of problems: non-cooperative, where the balloon must alter its ascent trajectory in order to avoid the airship and cooperative, where both vehicles make maneuvers through a negotiation protocol.

airship balloon negotiation optimal control↗
NASA NTRS2022

Conflict Resolution Strategies for Balloon-Airship Encounters in Upper Class E Air Traffic Management (ETM)

This paper examines strategic conflict resolution strategies for pair-wise high-altitude balloon, airship encounters. By strategic is meant that the conflict is identified (detected) at the time of flight plan submission or flight plan alteration through a service, such as an ETM Service Supplier (ESS). We investigate optimal control solutions for two classes of problems: non-cooperative, where the balloon must alter its ascent trajectory in order to avoid the airship and cooperative, where both vehicles make maneuvers through a negotiation protocol.

airship balloon negotiation optimal control↗
NASA NTRS1989

Trajectory generation of space telerobots

The purpose is to review a variety of trajectory generation techniques which may be applied to space telerobots and to identify problems which need to be addressed in future telerobot motion control systems. As a starting point for the development of motion generation systems for space telerobots, the operation and limitations of traditional path-oriented trajectory generation approaches are discussed. This discussion leads to a description of more advanced techniques which have been demonstrated in research laboratories, and their potential applicability to space telerobots. Examples of this work include systems that incorporate sensory-interactive motion capability and optimal motion planning. Additional considerations which need to be addressed for motion control of a space telerobot are described, such as redundancy resolution and the description and generation of constrained and multi-armed cooperative motions. A task decomposition module for a hierarchical telerobot control system which will serve as a testbed for trajectory generation approaches which address these issues is also discussed briefly.

Lumia, R.↗