SEARCH · Engineering Papers

Results for “continuous-wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Testing with the Laser-Enhanced Arc Jet Facility (LEAF) at NASA Ames Research Center

NASA's new Laser-Enhanced Arcjet Facility (LEAF) employs 200 kilowatts of continuous-wave fiber lasers, combined with a 60-megawatt arc plasma jet, to simulate the combined radiative and convective heating is now operational and Orion heat-shield material is undergoing testing. This upgrade to the existing Interaction Heating Facility (IHF) involves the addition of high-power fiber lasers that project 1070nm radiative energy into the existing vacuum chamber. The optically expanded laser beam enters a side window of the test chamber to form either a uniform 150 x 150 mm or a 425 x 425 mm square spot on a wedge-shaped model holder. Combined heating levels of up to 180 W/cm2 convective with either 300 W/cm2 or 100 W/cm2 are achievable. This allows the arc jet and lasers to simulate dynamic entry-heating profiles encountered during entry by the Orion crew capsule for the lunar return conditions. New computational investigations are underway to explore testing with the objective of defining ablative material failure limit. Typical arc-jet testing is performed with test article that are stagnation or wedge geometries. The existing convective heating test facility combined with test article design limits how high a combined shear, heat-flux and pressure conditions can be achieved. With the addition of laser power of 200 kW, much higher combined conditions of high heat-flux, pressure and shear is achievable on a wedge or a swept-cylinder article. Such testing possibilities will allow us to progressively increase the combined conditions and explore when an ablative TPS material may fail. The presentation provides an overview of the LEAF and present results from the on-going Orion Testing.

Venkatapathy, Ethiraj↗

NASA NTRS2019

Comparison of Integrated Digital Radiometer with Concurrent Water Vapor Radiometer using the Alphasat Receivers in Milan, Italy

In June 2014, NASA Glenn Research Center (GRC) and the Politecnico di Milano (POLIMI) jointly deployed a pair of coherent 20 GHz and 40 GHz beacon receivers to the POLIMI campus in Milan, Italy to characterize the atmospheric channel at Ka- and Q-band within the framework of the Alphasat experiment. The Milan receivers observe the continuous-wave beacons broadcast over Europe by the Aldo Paraboni Technology Demonstration Payload (TDP #5), and, in September 2017, both channels were upgraded to incorporate a novel digital radiometer (DR) measurement which NASA has recently employed in other propagation measurement campaigns. In November 2016, a co-located water vapor radiometer (WVR) was also installed at POLIMI, and the concurrent data from both the WVR and DR thusly enables validation of this new DR technique against the established WVR. Herein, we preliminarily investigate the calibration of the DR measurements using the WVR data and also assess a calibration method that may be implemented where WVR data is not readily available.

Zemba, Michael J.↗

NASA NTRS2020

Progress in Interferometric Rayleigh Scattering to Measure Fluctuations Spectra of Velocity and Temperature in High Speed Flows

A new, spectrally-resolved, Rayleigh scattering setup at NASA Ames is further developed to measure fluctuations in velocity and temperature. Using a combination of a continuous-wave laser, a stabilized Fabry-Perot interferometer (FPI), an EMCCD camera, and a photo-multiplier tube, the setup was demonstrated to provide fairly accurate measurements of time-averaged velocity, temperature, density and spectrum of density fluctuations in a high-speed free jet (Panda & White, 2018). This paper describes further progress in fast measurement of the Rayleigh-Brillouin spectrum via a 16-anode linear-array of photo-multiplier tube and a multi-channel, photo-electron counter. Rayleigh scattered light from a 0.4mm long probe volume was directly imaged through the FPI and was imaged on the linear array. Synchronous photo-electron counting over a series of short, contiguous gates provided time-evolution of the fringes at a 10 kHz sampling rate. Sample spectra collected from a Mach 0.98 jet show spectral content floating on high noise-floor. Efforts to collect longer time series of data and different schemes of extracting velocity and temperature information are now in progress.

Panda, J.↗

NASA NTRS2019

Comparison of Integrated Digital Radiometer with Concurrent Water Vapor Radiometer Using the Alphasat Receivers in Milan, Italy

Zemba, Michael↗

NASA NTRS2017

TPSAS-NF1676L-21094-DND

Advanced knowledge in atmospheric CO 2 distributions is critical in predicting the Earth's future climate. Large uncertainties in the prediction persist due to limited observations. This study focuses on the development and demonstration of the Intensity-Modulated Continuous-Wave (IM-CW) lidar for atmospheric CO 2 measurements. Simulations show that IM-CW lidar systems operating at 1.57 um will provide precise atmospheric column CO 2 measurements from space. Airborne systems have demonstrated the feasibility of the technology and instrumentation for space active atmospheric CO 2 missions. In this presentation, the atmospheric CO 2 column measurements from airborne flight campaigns and lidar system simulations for space missions will be discussed. Data analysis shows that airborne lidar CO 2 column measurements over desert and vegetated surfaces agree well with in-situ measurements. A measurement precision of 0.08% or ~0.3 ppmv for a 10-s average over these surfaces has also been achieved. Generally, airborne flight campaigns have demonstrated that the column CO 2 measurements of the current IM-CW lidar systems meet the accuracy and precision requirements of atmospheric CO 2 measurements. Furthermore, analyses of space CO 2 measurements shows that the current IM-CW lidar technology and approach will enable space missions to achieve their science goals.

Bing Lin↗

NASA NTRS1994

C-band Backscatter Measurements of Winter Sea Ice in the Weddell Sea, Antarctica

During the Winter Weddell Gyre Study, a 4.3 GHz frequency-modulated continuous-wave (FM-CW) radar scatterometer was operated from the port rail of the German ice-breaker R/V Polarstern to obtain detailed shipborne C-band backscatter measurement scans of Antarctic sea ice.

C-band↗

NASA NTRS2018

Differential Absorption Radar at 170 GHz for Atmospheric Boundary Layer Water Vapor Proﬁling

We are developing a frequency-modulated continuous-wave (FMCW) radar between 167 and 174.8 GHz to measure differential absorption due to water vapor within the atmospheric boundary layer. In this work, we report on single-frequency measurements performed within this band in the presence of precipitating clouds. Despite the relatively low transmit power of 6-10 dBm, the high transmit/receive isolation and low noise ﬁgure of the system enables detection of radar echos from rain or clouds with high signal-to-noise ratio (SNR) out to about one kilometer. Near future upgrades to the system that will lengthen signiﬁcantly the detectable range include a 15 to 20 dB increase in output power and 20 dB increase in antenna gain. This work builds on technology developed and measurements performed in our group in the 183.5 to 193 GHz band, which is subject to transmission restrictions due to passive remote sensing platforms that rely on those frequencies.

Rodriguez Monje, Raquel↗

NASA NTRS2018

Multi-frequency Tomography Radar Observations of Snow Stratigraphy at Fraser during SnowEx

SnowEx is a multi-year airborne snow campaign led by NASA. The purpose of SnowEx is to figure out how much water is stored in Earth’s terrestrial snow-covered regions. As part of the 2017 NASA SnowEx campaign, we deployed a portable triple-frequency (9.6GHz, 13.5GHz and 17.2GHz) and fully polarimetric frequency-modulated continuous-wave (FMCW) radar at Fraser, Colorado. The radar was installed on a 60cmx60cm frame to enable a full reconstruction of the three-dimensional variability per each radar channel. The tomography technique uses the radar echo from the multiple viewing positions and provides a unique access to the vertical structure of the snow layer. With current setup, the range resolution is 30cm. In this paper, we will review the radar design and signal-processing algorithm – time domain back projection. The generated vertical images show the snow stratigraphy, which is consistent with ground snow pit measurement. The continuous operation demonstrates diurnal thawing and refreezing process. The snow density is retrieved by comparing to the snow free image.

Esteban-Fernandez, Daniel↗

NASA NTRS2018

2.0 um Wavelength Injection Seed Semiconductor Laser for Lidar Transmitter for Global-Scale Measurements of CO2

Many of the high accuracy Earth science survey missions are planned to use laser-based remote sensing instruments. The 2-μm laser wavelength is of particular interest due to the presence of many CO2 and H20 absorption lines in its vicinity1. Transmitter architectures are typically composed of an optically pumped, frequency-stable, solid-state seed laser and a high-power optical amplifier.2, 3 Taking advantage of the reliability and relative simplicity of semiconductor lasers, this architecture can substantially improve by replacing the solid-state light source with semiconductor lasers of comparable performance. This approach will greatly improve the system reliability, and will simplify instrument integration and space qualification. There are currently very limited semiconductor lasers operating in the 2-m range with performance satisfactory enough for use as an injection seed in a laser absorption spectrometer. Optimally, seed lasers producing greater than 50 mW of continuous-wave (CW), with frequency jitter of less than 1 MHz are desired to reliably resolve the CO2 absorption lines near 2-µm. In this paper, we report the demonstration of high-power, single-longitudinal-mode laterally coupled distributed feedback (LC-DFB) lasers at 2.05 µm wavelength. We measured more than 80 mW of CW power at -10 ºC for devices with a 4-µm-wide ridge and 2-mm-long cavity.

Fradet, Mathieu↗

NASA NTRS2019

An upgraded G-band differential absorption radar system for future airborne studies

A proof-of-concept, 170 GHz frequency-modulated, continuous-wave (FMCW) radar has been developed for measuring water vapor profiles within the cloudy boundary layer from an airborne platform. The measurement concept exploits the differential absorption accrued by two or more transmitted frequencies in the vicinity of the 183 GHz water absorption line to retrieve range-resolved humidity profiles, so-called differential absorption radar (DAR). The upgraded system design includes important considerations for monostatic radar operation with an open fuselage viewport (i.e. no radome). The radar features an all-solid-state tansmitter with > 0:4 W continuous transmit power, a 60 cm primary aperture and corresponding 58 dB antenna gain, and more than 80 dB transmit/receive isolation, enabling near thermal-noise-limited sensitivity with a 8 dB noise figure receiver. Ice-cloud radar returns are detected beyond 8 km in height from the ground, demonstrating the high sensitivity of the system. In addition to in-cloud humidity profiling capabilities, deployment of a water vapor DAR from an airborne platform enables measurements of total column water vapor (TCWV) for all weather and surface scenarios. Precision estimates and potential biases for future TCWV measurements are discussed.

Monje, Raquel↗

NASA NTRSDate not supplied

Modeling Electro-Optic Frequency Comb Generation as a Pump Source for Quantum Communications

The Quantum Communications group at NASA GRC is focused on developing technologies and system architectures to enable future space-based quantum networks. High-repetition rate pulsed pump lasers are needed because the signal on the quantum channel cannot be amplified, hence entanglement generation rates can only be increased through high-rate pumping. Additionally, tunability in center frequency, pulse width, and repetition rate allows for a wider parameter space over which to optimize quantum channel frequency conversion efficiency, joint spectral engineering, and channel synchronization for high-fidelity entanglement swapping –a necessary stepping-stone towards quantum repeater development. One of the most flexible methods for high-repetition rate pulse generation is through spectral shaping–generating a frequency comb from a continuous-wave(CW)laser using electro-optic modulators (EOMs). As a result, this project focuses on analytically modeling and simulating the effects various EOMs such as phase and intensity modulators have on a CW source. Generating a tunable frequency comb as the pump source allows us to conveniently fine-tune the central frequency, repetition rate, and the spectral shape of our source to match the strict optimal parameters for any given entanglement source considered in the future. These models and simulations are to be used for comparison purposes for future experiments as well as for providing the Quantum Communications group a convenient tool to understand the effects of manipulating various parameters have on the outgoing frequency comb.

Electro-optic modulator↗

NASA NTRSDate not supplied

Volume Raycasting of GNSS Signals through Ground Structure Lidar for UAV Navigational Guidance and Safety Estimation

Autonomous UAS navigation at low altitudes is often hindered by degradation of GNSS position estimates. The line of sight from the UAS to orbital satellites may be intersected by foliage (which attenuates the received signal) and by buildings (which block the signal). Since the geometric ray from the presumed UAS position to each GNSS satellite orbital location is predictable, if a 3D survey of ground structures is available, the degree of blockage of each GNSS signal can be estimated. In this study we show raycasting from a UAS location to GNSS satellites at two flight locations: one with overlying structures and bordered by tall trees, and another in an arboreal canyon bordered by tall trees. We confirm the intermittent blockage of satellites in the first location sufficient to lose GNSS position fix. We demonstrate low-altitude GNSS fidelity forecasting via the raycasting method at the second location that can be used to plan navigable flight locations and altitudes. Finally, we match the GNSS signal strength with raycast-derived foliage obstruction depth at hundreds of observation times from 55 recordings collected over 14 days from November 2018 to February 2021 at the second location. This matching confirms that signal attenuation varies with the depth of foliage blockage along a saturating exponential curve, as found in prior continuous-wave RF studies. The exponent and saturation value are species dependent and therefore vary from site to site; once determined empirically, they can be used to characterize foliage along a particular flight path, and refine GNSS fidelity forecasts of flights along that path. The techniques described in this study show the feasibility of a survey method to construct low-altitude navigation safety maps and forecasts.

Navigation↗

DOE OSTI2022

Design of a high-power compact SRF linac for industrial applications of e-beam irradiation

Fermilab has developed a novel concept for an industrial electron linac using Nb3Sn coating technology and conduction cooling. These conduction-cooled linacs can generate electron beam energies up to 10 MeV in continuous-wave operation and reach higher power (>=1 MW) by combing several modules. Compact and light enough to mount on mobile platforms, our machine is anticipated to enable new in-situ environmental remediation applications such as waste-water treatment for urban areas, X-ray medical device sterilization, and innovative pavement applications. We highlight a few aspects of a 1 MW design of such a machine in this paper. A detailed plan is in Dhuley et al. (2022) Phys. Rev. Accel. Beams 25, 041601.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

High-Performance Accelerator Modeling: Toward Improving Controls and Diagnostics for High-Brightness Beams in Experiment

One of the main charges of beam physics is to improve the overall beam quality delivered to experiments and applications, which is generally quantified by the beam brightness. High brightness beams have numerous applications, including x-ray free electron lasers and ultrafast electron diffraction (UED). To these ends, this thesis details efforts to use high-performance models --- high-fidelity models that execute quickly --- for controls and diagnostics. To demonstrate the generality of these techniques, this thesis focuses on three of the most successful photoinjector designs currently used worldwide: the UCLA/SLAC/BNL-type high-gradient S-band gun, the continuous-wave high-repetition rate VHF APEX gun and the L-band DESY-PITZ-type gun. Work will be shown from Pegasus (UCLA), HiRES (LBNL) and FAST (FNAL).Specifically, data-driven models for online virtual diagnostics are presented, in this case, in the context of UED at HiRES, leading to a temporal resolution improvement. Methods for improving the fidelity of physics-based models are discussed, with examples at HiRES, Pegasus and FAST. Markov-chain Monte Carlo analysis is applied to match simulations, in the context of photocathode studies at HiRES and Pegasus. Lastly, the augmentation of online model-based predictions with model-independent optimization is explored in a fluctuating environment at Pegasus and HiRES. A central theme of this dissertation is working with parameter fluctuations when modeling an accelerator beamline. Long-term drifts and shot-to-shot jitter exist in every accelerator to a varying degree and therefore play an important role in every chapter of this dissertation. This thesis attempts to address the issues associated with these fluctuations when trying to develop faithful model representations of the system.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Nb 3 Sn Superconducting Cavities by Bronze Routes for Accelerator Stewardship

This project explored the challenges of making Nb 3 Sn superconducting radio-frequency (SRF) cavities by bronze routes. The SRF research community has prioritized Nb 3 Sn for many reasons, including the possibility to operate linacs for stewardship applications in continuous-wave mode with compact cryogenic systems. Existing Nb 3 Sn approaches use a cavity body made of niobium and apply tin to the polished cavity interior, a starting point that contains the main costs of present niobium cavity technology. Further complexity is then added because a high vacuum and temperature >1100 °C must be used to prevent formation of undesirable Nb-Sn phases, de-gas interstitial contaminants, and maintain the high purity of the Nb body. The project sought a more cost-effective solution for the same performance opportunities by exploiting the Cu-Sn-Nb diffusion reactions used to make Nb 3 Sn superconducting wires for magnets, which can be carried out at ~700 °C and are compatible with much cheaper copper cavity bodies. The project also sought understanding of the materials science and factors that affect superconducting properties. The project has impacted SRF cavity technology by demonstrating feasibility of alternative routes that enable compact, high-power electron accelerators for energy, security, environment, medical, and commercial applications.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

A Low-Cost, Reconfigurable UWB Microwave Radar Front-End for Fine Resolution Nadir-Looking Measurements of Snow and Layered Media

This paper presents a reconfigurable, low-cost ultra-wideband microwave radar front-end and radar demonstrator designed for nadir-looking measurements of layered media (e.g. snow or vegetation) from either a fast-moving ground-based platform or a C-3 class unmanned aerial system (UAS). The radar demonstrator uses a frequency modulated continuous-wave (FMCW) architecture and can be configured to operate in either the 2-8 GHz or in the 12-18 GHz range, providing fine vertical resolution while offering a significantly reduced weight, size, and power consumption with respect to prior implementations. We have demonstrated the operation of the system in the 2-8 GHz and 12-18 GHz bands in the laboratory; in the 2-8 GHz band using a surface-based setup in Antarctica; and in the 2.6-7 GHz band on local flight tests onboard an Aurelia X6 Pro UAS equipped with 3-D printed antennas. This paper provides an overview of the radar front-end and demonstrator design and implementation and a summary of the different tests completed to document their performance.

UWB radar, UAS-borne radar, snow-probing radar.↗

DOE OSTI2025

Compensating for Amplifier Non-Linearity in a SEL Controller

The Self-Excited Loop (SEL) architecture, used in some continuous-wave (CW) superconducting linacs, relies on a positive feedback mechanism that requires carefully defined operating limits to ensure stable operation. These limits are typically derived from amplifier calibration, which characterizes the relationship between forward power and DAC drive. However, amplifier non-linearity often prevents a simple linear fit of this characteristic, introducing errors that can compromise stability. To address this, we present a modified calibration procedure that incorporates amplifier non-linearity into the SEL framework. The approach is validated with test data from a 32 kW solid-state amplifier (SSA) and a cavity emulator developed for the Fermilab PIP-II linac.

Raman, S. [Fermilab] (ORCID:0009000735937206)↗

DOE OSTI2025

Design of a 915 MHz conduction-cooled cryomodule

High-power, compact, continuous-wave (CW) linear electron accelerators with beam energies of up to 10 MeV are being considered for possible industrial applications. Conduction-cooled, superconducting radio-frequency (SRF) technology allows operating such machines at high electrical efficiency, thereby reducing the operating cost significantly. A prototype conduction-cooled SRF cryomodule has been designed and components are currently being manufactured. The cryomodule features a two-cell, 915 MHz SRF cavity, two cryocoolers, a fundamental power coupler, two magnetic shields, a thermal shield and warm-to-cold transitions. The cryomodule has been designed to be able to provide an energy gain of 3.5 MeV to a CW electron beam with a current of 5 mA. This contribution focusses on thermal and mechanical design aspects of the cryomodule.

Ciovati, G. [Old Dominion Univ., Norfolk, VA (Unit↗