Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “confining effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Stress concentration in the vicinity of a hole defect under conditions of Hertzian contact

Two-dimensional photoelastic stress analyses were conducted for epoxy resin models containing a hole defect under the conditions of Hertzian contact. Stress concentrations around the defect were determined as a function of several parameters. These were hole diameter, its vertical distance from the contact surface, and the horizontal distance from the Hertzian contact area. Also determined was the effect of tangential traction (generated by a friction coefficient of 0.1) on the stress concentration. Sharp stress concentrations occur in the vicinity of both the left and the right side of the hole. The stress concentration becomes more distinct the larger the hole diameter and the smaller the distance between the hole and the contact surface. The stress concentration is greatest when the disk imposing a normal load is located at the contact surface directly over the hole. The magnitude and the location of stress concentration varies with the distance between the Hertzian contact area and the hole. Taking into account the stress amplitude, the area which can be involved in a process of rolling contact fatigue seems to be confined to a shallow region at both sides of the hole. The effect of tangential traction is comparatively small on the stress concentration around the hole.

Yamamoto, T.↗
NASA NTRS1992

Studies of the effects of curvature on dilution jet mixing

An analytical program was conducted using both three-dimensional numerical and empirical models to investigate the effects of transition liner curvature on the mixing of jets injected into a confined crossflow. The numerical code is of the TEACH type with hybrid numerics; it uses the power-law and SIMPLER algorithms, an orthogonal curvilinear coordinate system, and an algebraic Reynolds stress turbulence model. From the results of the numerical calculations, an existing empirical model for the temperature field downstream of single and multiple rows of jets injected into a straight rectangular duct was extended to model the effects of curvature. Temperature distributions, calculated with both the numerical and empirical models, are presented to show the effects of radius of curvature and inner and outer wall injection for single and opposed rows of cool dilution jets injected into a hot mainstream flow.

Holdeman, James D.↗
NASA NTRS1999

Synergistic Effects of Physical Aging and Damage on Long-Term Behavior of Polymer Matrix Composites

The research consisted of two major parts, first modeling and simulation of the combined effects of aging and damage on polymer composites and secondly an experimental phase examining composite response at elevated temperatures, again activating both aging and damage. For the simulation, a damage model for polymeric composite laminates operating at elevated temperatures was developed. Viscoelastic behavior of the material is accounted for via the correspondence principle and a variational approach is adopted to compute the temporal stresses within the laminate. Also, the effect of physical aging on ply level stress and on overall laminate behavior is included. An important feature of the model is that damage evolution predictions for viscoelastic laminates can be made. This allows us to track the mechanical response of the laminate up to large load levels though within the confines of linear viscoelastic constitutive behavior. An experimental investigation of microcracking and physical aging effects in polymer matrix composites was also pursued. The goal of the study was to assess the impact of aging on damage accumulation, in ten-ns of microcracking, and the impact of damage on aging and viscoelastic behavior. The testing was performed both at room and elevated temperatures on [+/- 45/903](sub s) and [02/903](sub s) laminates, both containing a set of 90 deg plies centrally located to facilitate investigation of microcracking. Edge replication and X-ray-radiography were utilized to quantify damage. Sequenced creep tests were performed to characterize viscoelastic and aging parameters. Results indicate that while the aging times studied have limited ]Influence on damage evolution, elevated temperature and viscoelastic effects have a profound effect on the damage mode seen. Some results are counterintuitive, including the lower strain to failure for elevated temperature tests and the catastrophic failure mode observed for the [+/- 45/9O3](sub s), specimens. The fracture toughness for transverse cracks increases with increasing temperature for both systems: transverse cracking was completely absent prior to failure in [+/- 45/903](sub s), and was suppressed for [02/903](sub s). No significant effect of damage on aging or viscoelastic parameters was observed.

Brinson, L. Cate↗
NASA NTRS1974

The chemistry and diffusion of aircraft exhausts in the lower stratosphere during the first few hours after fly-by

An analysis of the hydrogen-nitrogen-oxygen reaction systems in the lower stratosphere as they are initially perturbed by individual aircraft engine exhaust plumes was conducted in order to determine whether any significant chemical reactions occur, either among exhaust chemical species, or between these species and the environmental ozone, while the exhaust products are confined to intact plume segments at relatively high concentrations. The joint effects of diffusive mixing and chemical kinetics on the reactions were also studied, using the techniques of second-order closure diffusion/chemistry models. The focus of the study was on the larger problem of the potential depletion of ozone by supersonic transport aircraft exhaust materials emitted into the lower stratosphere.

Hilst, G. R.↗
NASA NTRS1975

A size-frequency study of large Martian craters

The log normal frequency distribution law was used to analyze the crater population on the surface of Mars. Resulting data show possible evidence for the size frequency evolution of crater producing bodies. Some regions on Mars display excessive depletion of either large or small craters; the most likely causes of the depletion are considered. Apparently, eolian sedimentation has markedly altered the population of the small craters south of -30 deg latitude. The general effects of crater obliteration in the Southern Hemisphere appear to be confined to diameters of less than 20 km. A strong depletion of large craters in a large region just south of Deuteronilus Mensae, and in a small region centered at 35 deg latitude and 10 deg west longitude, may indicate locations of subsurface ice.

Woronow, A.↗
NASA NTRS1977

A size-frequency study of large Martian craters

Martian craters in the size range 10-250 km follow a log-normal size-frequency distribution law. Analysis techniques based on the log-normal model yield possible evidence for the size-frequency evolution of crater-producing bodies. Some regions on Mars display excessive depletions of either large or small craters; the most likely causes of the depletions are considered. Apparently, eolian sedimentation has markedly altered the population of small craters south of -30 deg latitude. The general effects of crater obliteration in the Southern Hemisphere appear to be confined to diameters of less than 20 km. A strong depletion of large craters in a large region centered at 35 deg latitude and 10 deg W longitude may indicate locations of subsurface ice.

Woronow, A.↗
NASA NTRS1986

Dilution jet mixing program, supplementary report

The velocity and temperature distributions predicted by a 3-D numerical model and experimental measurements are compared. Empirical correlations for the jet velocity trajectory developed are presented. The measured velocity distributions for all test cases of phase through phase 3 are presented in the form of contour and oblique plots. quantification of the effects of the following on the jet mixing characteristics with a confined crossflow are: (1) orifice geometry momentum flux ratio and density ratio; (2) nonuniform mainstream temperature and velocity profiles upstream of dilution orifices; (3) cold versus hot jet injection; (4) cross-stream flow are a convergence as encountered in practical dilution zone geometries; (5) 2-D slot versus circular orifices; (6) discrete noncirculcer orifices; (7) single-sided versus opposed jets; (8) single row of jets.

Srinivasan, R.↗
NASA NTRS1987

Cosmic-ray propagation in the Galaxy and in the heliosphere - The path-length distribution at low energy

The energy dependence of the path-length distribution of cosmic rays at low energies, below relativistic velocities, is studied, and its implications for models of cosmic-ray confinement and propagation in the Galaxy and Galactic halo, including the effects of a possible Galactic wind, are studied. It is found that the mean free path in Galactic propagation must be fully energy-dependent, with the mean of an exponential path-length distribution increasing with increasing energy below 1 GeV per nucleon and decreasing with increasing energy above 1 GeV per nucleon. This indicates that, at low energies, diffusion is not the controlling process. The path-length distribution is not purely exponential but is depleted in short path lengths at low energies. This depletion is energy-dependent, being largest at low energies and decreasing with increasing energy.

Garcia-Munoz, M.↗
NASA NTRS1988

Growth of GaAs crystals from the melt in a partially confined configuration

The experimental approach was directed along two main goals: (1) the implementation of an approach to melt growth in a partially confined configuration; and (2) the investigation of point defect interaction and electronic characteristics as related to thermal treatment following solidification and stoichiometry. Significant progress was made along both fronts. Crystal growth of GaAs in triangular ampuls was already carried out successfully and consistent with the model. In fact, pronounced surface tension phenomena which cannot be observed in ordinary confinement system were identified and should premit the assessment of Maragoni effects prior to space processing. Regarding thermal treatment, it was discovered that the rate of cooling from elevated temperatures is primarily responsible for a whole class of defect interactions affecting the electronic characteristics of GaAs and that stoichiometry plays a critical role in the quality of GaAs.

Gatos, Harry C.↗
NASA NTRS1993

Nuclear winds and the narrow-line emission from active galaxies

This paper discusses active galaxy narrow-line emission in the context of a supersonic wind generated by the active nucleus, a nuclear wind. Wind acceleration can naturally produce the inferred narrow-line cloud velocities as well as those of the broad-line and broad absorption line clouds with only a weak dependence on the parameters of the active nucleus. The primary obstacle to wind acceleration of emission-line clouds is the destructive effect of instabilities; however, the stability and structure of wind-confined clouds remain areas of future research. Observations, particularly of the Seyfert galaxy NGC 1068, are interpreted in the context of nuclear winds.

Smith, Steven J.↗
NASA NTRS1994

Catalogue of UBVRI photometry of T Tauri stars and analysis of the causes of their variability

A computer-based catalogue of UBVRI photoelectric photometry of T Tauri stars and their earlier type analogs has been compiled. It presently includes over 10 000 entries on 80 stars and will be updated on a regular basis; it is available on Internet. The catalogue is used to analyze the sometimes bizarre light variations of pre-main-sequence stars on time scales of days to months in an attempt to illuminate the nature and causes of the phenomenon. It is useful in discussing their light variations to divide the stars into three groups according to their spectra. These are: weak T Tauri stars (WTTS; spectral class later than K0 and W(sub H-alpha less than 10 A), classical T Tauri stars (CTTS; spectral class later than K0 and W(sub H-alpha) greater than 10 A), and early type T Tauri stars (ETTS; spectral class of K0 or earlier). Three distinct types of variability are displayed by stars in the catalogue. Type I variations are periodic in VRI and undoubtedly caused by rotational modulation of a star with an asymmetric distribution of cool spots on its surface. Irregular flare activity is sometimes seen on such stars in U and B. Type I variations are easiest to see on WTTS but are clearly present on CTTS and ETTS as well. Type II variations are caused by hot 'spots' or zones and, it is argued, result from changes in the excess or 'veiling' continuum commonly attributed to an accretion boundary layer or impact zone of a magnetically channeled accretion flow. This type of variation is seen predominantly or solely in CTTS. A subcategory, designated Type IIp, consists of stars which display periodic variations caused by hot spots. Whereas cool spots may last for hundreds or thousands of rotations, hot spots appear to come and go on a much shorter time scale. This suggests that both unsteady accretion and rotation of the star contribute to Type II variations. It is shown that a third type of variation exists among ETTS, including stars as early as A type. UX Ori is a typical example and we call these Type III variables or UXors. Their distinguishing characteristic is that they can display very large amplitudes (exceeding 2.8 mag in V) while showing little or no evidence for a veiling continuum or any substantial change in their photospheric spectra. If Type III variations are caused by changes in accretion luminosity, then boundary layers or impact zones in ETTS must be much different from CTTS which, of course, is possible since mass accretion rates are probably much higher. However, the leading hypothesis for explaining Type III variations is variable obscuration by circumstellar dust. It is argued that the putative dust clumps causing such variations cannot be confined to a disk; otherwise UXors would be rare. Perhaps magnetic effects are involved in levitating accreting dust out of the plane, as has been suggested for CTTS, or perhaps we are witnessing continuing infall of clumps from placental clouds. A third possibility is that dust may be condensing in an outflow.

Herbst, William↗
NASA NTRS1998

Sand Shear Band Thickness Measurements by Digital Imaging Techniques

Digital imaging analysis was used to study localized deformations in granular materials tested under plane strain condition. Two independent techniques were applied and compared. In the first, the digitized optical images of a grid printed on the latex membrane were used to measure the shear band orientation angle and thickness, and were found to be 54.5' and 3.01 mm respectively. The second technique involved introducing an ultra-low viscosity resin into the specimen in preparation for thin- sectioning and microscopic study of the internal fabric. A total of 24 microscopic images obtained from four thin sections were analyzed and void ratio variation was measured. The shear band thickness measurements from images located along the shear band axis (at two locations) were equal to 3.19 mm and 3.29 mm which are very close to the average value obtained from surface analysis. The study was then extended to investigate the effects of sand grain-size and properties, specimen density, and confining pressure on shear band thickness. It was found that the normalized shear band thickness decreases as grain-size and confining pressure increase and as density decreases. Finally, shear band thickness is highly influenced by the specimen dilatancy.

Alshibli, Khalid A.↗
NASA NTRS2001

Gasdynamic Mirror Fusion Propulsion Experiment

Nuclear fusion appears to be the most promising concept for producing extremely high specific impulse rocket engines. One particular fusion concept which seems to be particularly well suited for fusion propulsion applications is the gasdynamic mirror (GDM). This device would operate at much higher plasma densities and with much larger LD ratios than previous mirror machines. Several advantages accrue from such a design. First, the high LA:) ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. Second, the high plasma density will result in the plasma behaving much more Re a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with "loss cone" microinstabilities. An experimental GDM device is currently being constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the feasibility of this type of propulsion system. Initial experiments are expected to commence in the late fall of 2000.

Emrich, William J., Jr.↗
NASA NTRS2002

Current Status of the Gasdynamic Mirror Fusion Propulsion Experiment

Nuclear fusion appears to be the most promising concept for producing extremely high specific impulse rocket engines. One particular fusion concept which seems to be particularly well suited for fusion propulsion applications is the gasdynamic mirror (GDM). An experimental GDM device has been constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the feasibility of this type of propulsion system. An initial shakedown of the device is currently underway with initial experiments slated to occur in late 2001. This device would operate at much higher plasma densities and with much larger L/D ratios than previous mirror machines. The high L/D ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. The high plasma density results in the plasma behaving much more like a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with 'loss cone' microinstabilities. The device has been constructed to allow a considerable degree of flexibility in its configuration thus permitting the experiment to grow over time without necessitating a great deal of additional fabrication.

Emrich, William J., Jr.↗
NASA NTRS2003

First Results of the Gasdynamic Mirror Experiment

An experimental Gasdynamic Mirror or GDM device has been constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the applicability of this technology for propulsion systems. This paper presents the first experimental results obtained from the machine. It is intended that this device operate at higher plasma densities and with much larger L/D ratios than previous mirror machines. The high L/D ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. The high plasma density results in the plasma behaving much more like a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with "loss cone" microinstabilities. The device has been constructed to allow a considerable degree of flexibility in its configuration thus permitting the experiment to grow over time without necessitating a great deal of additional fabrication.

Emrich, William J., Jr.↗
NASA NTRS2002

First Results of the Gasdynamic Mirror Fusion Propulsion Experiment

An experimental Gasdynamic Mirror or GDM device has been constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the applicability of this technology for propulsion systems. This paper presents the first experimental results obtained from the machine and an analysis of the types of plasma instabilities likely to be encountered. It is intended that this device operate at higher plasma densities and with much larger L/D ratios than previous mirror machines. The high L/D ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. The high plasma density results in the plasma behaving much more like a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with "loss cone" microinstabilities. The device has been constructed to allow a considerable degree of flexibility in its configuration thus permitting the experiment to grow over time without necessitating a great deal of additional fabrication.

Emrich, William J., Jr.↗
NASA NTRS2003

Large-Eddy Simulation of Conductive Flows at Low Magnetic Reynolds Number

In this paper we study the LES method with dynamic procedure in the context of conductive flows subject to an applied external magnetic field at low magnetic Reynolds number R(sub m). These kind of flows are encountered in many industrial applications. For example, in the steel industry, applied magnetic fields can be used to damp turbulence in the casting process. In nuclear fusion devices (Tokamaks), liquid-lithium flows are used as coolant blankets and interact with the surrounding magnetic field that drives and confines the fusion plasma. Also, in experimental facilities investigating the dynamo effect, the flow consists of liquid-sodium for which the Prandtl number and, as a consequence, the magnetic Reynolds number is low. Our attention is focused here on the case of homogeneous (initially isotropic) decaying turbulence. The numerical simulations performed mimic the thought experiment described in Moffatt in which an initially homogeneous isotropic conductive flow is suddenly subjected to an applied magnetic field and freely decays without any forcing. Note that this flow was first studied numerically by Schumann. It is well known that in that case, extra damping of turbulence occurs due to the Joule effect and that the flow tends to become progressively independent of the coordinate along the direction of the magnetic field. Our comparison of filtered direct numerical simulation (DNS) predictions and LES predictions show that the dynamic Smagorinsky model enables one to capture successfully the flow with LES, and that it automatically incorporates the effect of the magnetic field on the turbulence. Our paper is organized as follows. In the next section we summarize the LES approach in the case of MHD turbulence at low R(sub m) and recall the definition of the dynamic Smagorinsky model. In Sec. 3 we describe the parameters of the numerical experiments performed and the code used. Section 4 is devoted to the comparison of filtered DNS results and LES results. Conclusions are presented in Sec. 5.

Knaepen, B.↗
NASA NTRS2021

Novel Ways to use the International Spacer Station as an Exploration Analog: International Progress in Planning "ISS4Mars"

In October 2020, International Space Station (ISS) Partner Agencies held a set of international workshops to solicit and develop creative and forward-looking ideas for using the ISS as an analog for preparation for Mars missions during its 3rd decade of operations. The workshops brought together participants from nine international space agencies or organizations, with stakeholders consisting of research managers, discipline experts, technology developers, flight physicians, flight operators, and astronauts. Breakout meetings and brainstorming sessions were conducted focusing on the following topics: Critical hazards and countermeasures for the transit to Mars; gravity transitions and early surface operations; environmental control and life support systems; food systems; human microbiome, microbial monitoring, and planetary protection; medical operations for Mars missions; isolation and confinement; autonomous systems and crew-centered autonomy; and communications delay effects on operations. In many cases the scenarios and approaches identified were compelling but challenging to implement under the current utilization structure used to manage the ISS for experiments. Following the series of workshops, a team of utilization leaders across the ISS partnership worked to compile the workshop recommendations and extract a set of use-cases with their prerequisites and constraints. The work considered the following aspects: what can be effectively done on ISS; which new technologies, approaches and scenarios are feasible; what alternatives could be considered; and what steps should be taken to enable integrated testing and future use of ISS as an analog for Mars missions. The final report will be published so that the use cases can be considered in each agency’s strategic planning processes. This paper will cover the process of international assessment in detail and how this process has influenced and broadened the vision of ISS utilization beyond single experiments to integrated studies and testing for future Mars missions. This approach to international collaboration informs both the next decade of international exploration research on the ISS and advancement of its utilization as an analog for deep space missions. For many of the participating partners, it also helps to frame the strategy for human research in Artemis as we begin planning for human missions to the moon. We conclude with a summary of the progress on the actions in the report and the additional implementation discussions that have occurred across the partnership.

Julie A Robinson↗