Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “component isolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Fractionated and purified hybrid poplar lignins as a polyol replacement in rigid polyurethane/polyisocyanurate foams

This study introduces fractionated lignin as an innovative component in the formulation of rigid polyurethane/polyisocyanurate (PUR/PIR) foams. Low-density PUR/PIR rigid foams were prepared by replacing 80% of the petrochemical-based polyol with a hybrid poplar (HP) lignin, recovered via alkaline pretreatment, and also with a fraction of this lignin, isolated via the Aqueous Lignin Purification with Hot Agents (ALPHA) process. The as-recovered HP and ALPHA-fractionated HP lignins were characterized to determine hydroxyl content, molecular weight (Mw) distribution, and pH. Both lignin-based foams met minimum standard requirements in terms of closed cell content, compression strength, and thermal conductivity. Notably, the foams made with ALPHA-based lignin outperformed the as-recovered lignin-based foams in all measured foam properties. Moreover, the ALPHA-based foam had comparable performance to the control foam (without lignin) except for density and even surpassed the control foam in closed cell content and compressive strength. This investigation of the molecular properties of lignin suggests that significant reductions in lignin average molecular weight and polydispersity (PDI) can positively impact the properties of lignin-based rigid foams.

09 BIOMASS FUELS↗
DOE OSTI2024

Cu Based Dilute Alloys for Tuning the C 2+ Selectivity of Electrochemical CO 2 Reduction

Electrochemical CO 2 reduction is a promising technology for replacing fossil fuel feedstocks in the chemical industry but further improvements in catalyst selectivity need to be made. So far, only copper-based catalysts have shown efficient conversion of CO 2 into the desired multi-carbon (C 2+ ) products. This work explores Cu-based dilute alloys to systematically tune the energy landscape of CO 2 electrolysis toward C 2+ products. Selection of the dilute alloy components is guided by grand canonical density functional theory simulations using the calculated binding energies of the reaction intermediates CO*, CHO*, and OCCO* dimer as descriptors for the selectivity toward C 2+ products. Here, a physical vapor deposition catalyst testing platform is employed to isolate the effect of alloy composition on the C 2+ /C 1 product branching ratio without interference from catalyst morphology or catalyst integration. Six dilute alloy catalysts are prepared and tested with respect to their C 2+ /C 1 product ratio using different electrolyzer environments including selected tests in a 100-cm 2 electrolyzer. Consistent with theory, CuAl, CuB, CuGa and especially CuSc show increased selectivity toward C 2+ products by making CO dimerization energetically more favorable on the dominant Cu facets, demonstrating the power of using the dilute alloy approach to tune the selectivity of CO 2 electrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Increased AGE Cross-Linking Reduces the Mechanical Properties of Osteons

Abstract The osteon is the primary structural component of bone, contributing significantly to its unique toughness and strength. Despite extensive research on osteonal structure, the properties of osteons have not been fully investigated, particularly within the context of bone fragility diseases like type 2 diabetes mellitus (T2DM). This study aims to isolate osteons from bovine bone, simulate the effects of increased advanced glycation end-products (AGEs) in T2DM through ribosylation, and evaluate the mechanical properties of isolated osteons. Osteons extracted from the posterior section of bovine femur mid-diaphysis were processed to achieve a sub-millimeter scale for microscale imaging. Subsequently, synchrotron radiation micro-computed tomography was employed to precisely localize and isolate the osteon internally. While comparable elastic properties were observed between control and ribosylated osteons, the presence of AGEs led to decreased strain to failure. Young’s modulus was quantified (9.9 ± 4.9 GPa and 8.7 ± 3 GPa, respectively), aligning closely with existing literature. This study presents a novel method for the extraction and isolation of osteons from bone and shows the detrimental effect of AGEs at the osteonal level.

Materials Science↗
DOE OSTI2021

Modeling and experimental validation of a W f /W-fabrication by chemical vapor deposition and infiltration

Tungsten (W) has a unique combination of excellent thermal properties, low sputter yield, low hydrogen retention, and acceptable activation. Therefore, W is presently the main candidate for the first wall material in future fusion devices. However, its intrinsic brittleness and its further embrittlement during operation bears the risk of a sudden and catastrophic component failure. As a countermeasure, tungsten fiber-reinforced tungsten (W f /W) with extrinsic toughening is being developed. A possible synthesis route is chemical vapor deposition (CVD) using heated W fabrics as substrate. The challenge is that the growing CVD-W can isolate domains from precursor access leading to strength-reducing pores. To deepen the process understanding and to optimize the CVD parameters, models were developed with COMSOL Multiphysics and validated experimentally. W deposition rate equations as function of the temperature and the partial pressures of the precursors H 2 and WF 6 were experimentally validated in previous work. In the present article, these equations are applied to obtain partial pressures within the CVD reactor. The results are taken as input for transient simulations in the microscale, in which W coatings, growing onto multiple adjacent W fibers, were simulated via mesh deformation and remeshing. The surface-to-surface contact of the W coatings and the corresponding potential pore formation were simulated by implementing sophisticated deposition rate stop conditions. Within the measuring uncertainties of ≃ ±1%, the models are validated successfully by experimental comparison regarding the deposition rate, pore structure, and relative densities ranging from 0.6 to 0.9.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multifactorial genetic control and magnesium levels govern the production of a Streptomyces antibiotic with unusual cell density dependence

Streptomyces bacteria are renowned both for their antibiotic production capabilities and for their cryptic metabolic potential. Their metabolic repertoire is subject to stringent genetic control, with many of the associated biosynthetic gene clusters being repressed by the conserved nucleoid-associated protein Lsr2. In an effort to stimulate new antibiotic production in wild Streptomyces isolates, we leveraged the activity of an Lsr2 knockdown construct and successfully enhanced antibiotic production in the wild Streptomyces isolate WAC07094. We determined that this new activity stemmed from increased levels of the angucycline-like family member saquayamycin. Saquayamycin has both antibiotic and anti-cancer activities, and intriguingly, beyond Lsr2-mediated repression, we found saquayamycin production was also suppressed at high density on solid or in liquid growth media; its levels were greatest in low-density cultures. This density-dependent control was exerted at the level of the cluster-situated regulatory gene sqnR and was mediated in part through the activity of the PhoRP two-component regulatory system, where deleting phoRP led to both constitutive antibiotic production and sqnR expression. This suggests that PhoP functions to repress the expression of sqnR at high cell density. We further discovered that magnesium supplementation could alleviate this density dependence, although its action was independent of PhoP. Finally, we revealed that the nitrogen-responsive regulators GlnR and AfsQ1 could relieve the repression exerted by Lsr2 and PhoP. Intriguingly, we found that this low density-dependent production of saquayamycin was not unique to WAC07094; saquayamycin production by another wild isolate also exhibited low-density activation, suggesting that this spatial control may serve an important ecological function in their native environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Synthesis of results for Brine Availability Test in Salt (BATS) DECOVALEX-2023 Task E

In the 2023 phase of the international collaborative DECOVALEX modeling project, Task E focused on understanding thermal, hydrological, and mechanical (THM) processes related to predicting brine migration in the excavation damaged zone around a heated excavation in salt. Salt is attractive as a disposal medium for radioactive waste because it is self-healing and is essentially impermeable and non-porous in the far field. Investigation of the short-term, near-field behavior is important for radioactive waste disposal because this early period strongly controls the amount of inflowing brine. Brine leads to corrosion of waste forms and waste packages, and possible dissolution of radionuclides with brine transport being a potential transport vector to the accessible environment.The Task was divided into steps. Step 0 included matching unheated brine inflow data from boreholes at the Waste Isolation Pilot Plant (WIPP) and matching temperature observations during a Brine Availability Test in Salt (BATS) heater test. Step 1 included validation of models against a thermo-poroelastic analytical solution, and two-phase flow around an excavation. Finally, Step 2 required all the individual components covered in steps 0 and 1 to come together to match observed brine inflow behavior during the same BATS heater test.There were a range of approaches from the teams, from mechanistic to prescriptive. Given the uncertainties in the problem, some teams used one- or two-dimensional models of the processes, while other teams included more geometrical complexity in three-dimensional models. Task E was a learning experience for the teams involved, and feedback from the modeling teams has led to changes in follow-on BATS experiments at WIPP. The primary Task E lessons learned were the impact of hydrologic initialization methods (wetting up vs. drying down), the difference between confined and unconfined thermal expansion, and the large changes in permeability associated with heating and cooling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Hempseed cell wall polysaccharides are dominated by linear xylans and cellulose: Comprehensive structural profiling of ten cultivars of industrial hemp, Cannabis sativa L .

Hempseed is a rich source of dietary fiber; however, there has been limited research on the variability of carbohydrate composition in hempseed cell walls. The primary aim of this study was to conduct a comprehensive chemical and structural analysis of the cell wall polysaccharides in ten hempseed cultivars. Water-soluble polysaccharides (WSP) and water-insoluble residues (WIR) were isolated and subsequently analyzed for their monosaccharide composition using HPAEC-PAD, glycosyl linkage analysis using GC–MS, and structural characterization via NMR spectroscopy. All hempseed cultivars contained a high proportion of insoluble fibers and smaller amounts of soluble polysaccharides. Glucose and xylose were the most abundant components of the WIR fractions, while the WSP fractions contained abundant amounts of galactose, galacturonic acid, arabinose, rhamnose, and mannose. The results of linkage and spectroscopic analysis were consistent with the compositional analysis, identifying cellulose and acetylated linear xylans as primary components of WIR, and arabinogalactans, rhamnogalacturonans, heteromannans, xyloglucans, and arabinan as predominant in WSP. Altogether, the study revealed a comparable cell wall structure among the analyzed hemp seed varieties. The high fiber content of whole hempseed-based ingredients presents significant potential for food manufacturers seeking to develop products with enhanced dietary fiber content, offering both functional and nutritional benefits for consumers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Influence of loblolly pine anatomical fractions and tree age on oil yield and composition during fast pyrolysis

Fast pyrolysis of woody materials is a technology pathway for producing renewable fuels and chemicals. This is a presentation of isolating needles, bark, and stemwood from a single tree as well as isolating stemwood and whole tree samples from the same species of tree with different ages and pyrolyzing each individually as well as in mixtures. This gives insight into the role of tree anatomical fractions on the resulting intermediate oil product as well as into interactions between these components. The highest carbon content oil (45.1 wt% as received) was produced from a one-to-one mixture of stemwood and needles, followed by the pure stemwood (43.4–43.8 wt% as received), while the lowest oil carbon content was from a one-to-one blend of bark and needles (26.7 wt% as received). The pyrolysis oil yield (combining oil and aqueous where separation occurred) varied from 54 wt% as received (needles) to 72.3 wt% as received (stemwood). When comparing trees of different ages, we find the change in the ratio of the anatomical fractions is a dominant factor in the product composition and yields, while the product composition and yields vary slightly with tree age when only the stemwood is pyrolyzed. Here, in this study, we present the bench-scale pyrolysis, yields, and product characterization of loblolly pine feedstocks (13- vs. 23 year-old, residues, air-classified residues, whole tree, needles, bark, and stemwood).

09 BIOMASS FUELS↗
DOE OSTI2022

The State of Virtual Healthcare

In recent years, telehealth or telemedicine has become an integral component of health systems. During the COVID-19 pandemic, telehealth became the primary route of treatment for patients and doctors. The goals of telehealth are to make healthcare more accessible to patients who have limited mobility, time, or transportation options and those who live in rural or isolated communities. Telehealth aims to improve coordination and care between healthcare teams and their patients. While addressing accessibility, telehealth sets health systems on a path to meet their decarbonization and energy reduction goals. The document provides insights and best practices for telehealth, including carbon reduction, space utilization, equitable access, and technology.

Better Buildings, telehealth, carbon footprint↗
DOE OSTI2023

Downhole to surface communications platform for drilling applications

A drilling assembly for downhole to surface communications is provided. The drilling assembly includes a series of pipe segments coupled in fluid communication between a slip ring assembly and an end pipe portion. The slip ring assembly is coupled in data and fluid communication with the pipe segments. A surface communications link is in data communication with the drilling assembly via the slip ring assembly. An end pipe portion is coupled with the drilling assembly that includes an electronics assembly with electronic components for transferring data to the slip ring assembly via the drilling assembly. A drill bit is operably coupled with the end pipe portion for drilling a borehole. Each pipe segment includes an outer conductor portion, a hollow inner conductor portion, and a dielectric portion for electrical isolation between the outer conductor portion and the inner conductor portion.

Su, Jiann-Cherng↗
DOE OSTI2022

High-quality microresonators in the longwave infrared based on native germanium

The longwave infrared (LWIR) region of the spectrum spans 8 to 14 μm and enables high-performance sensing and imaging for detection, ranging, and monitoring. Chip-scale LWIR photonics has enormous potential for real-time environmental monitoring, explosive detection, and biomedicine. However, realizing technologies such as precision sensors and broadband frequency combs requires ultra low-loss and low-dispersion components, which have so far remained elusive in this regime. Here, we use native germanium to demonstrate the first high-quality microresonators in the LWIR. These microresonators are coupled to partially-suspended Ge waveguides on a separate glass chip, allowing for the first unambiguous measurements of isolated linewidths. At 8 μm, we measured losses of 0.5 dB/cm and intrinsic quality (Q) factors of 2.5 × 10 5 , nearly two orders of magnitude higher than prior LWIR resonators. Our work portends the development of novel sensing and nonlinear photonics in the LWIR regime.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Accurate and complete genomes from metagenomes

Genomes are an integral component of the biological information about an organism; thus, the more complete the genome, the more informative it is. Historically, bacterial and archaeal genomes were reconstructed from pure (monoclonal) cultures, and the first reported sequences were manually curated to completion. However, the bottleneck imposed by the requirement for isolates precluded genomic insights for the vast majority of microbial life. Shotgun sequencing of microbial communities, referred to initially as community genomics and subsequently as genome-resolved metagenomics, can circumvent this limitation by obtaining metagenome-assembled genomes (MAGs); but gaps, local assembly errors, chimeras, and contamination by fragments from other genomes limit the value of these genomes. Here, we discuss genome curation to improve and, in some cases, achieve complete (circularized, no gaps) MAGs (CMAGs). To date, few CMAGs have been generated, although notably some are from very complex systems such as soil and sediment. Through analysis of about 7000 published complete bacterial isolate genomes, we verify the value of cumulative GC skew in combination with other metrics to establish bacterial genome sequence accuracy. The analysis of cumulative GC skew identified potential misassemblies in some reference genomes of isolated bacteria and the repeat sequences that likely gave rise to them. We discuss methods that could be implemented in bioinformatic approaches for curation to ensure that metabolic and evolutionary analyses can be based on very high-quality genomes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Characterization and Damping Control of Mechanical Connections to Improve Performance of Horn Stripline

Magnetic focusing horns are critical components for creating a stable beam of neutrinos for neutrino facilities, such as the Long Baseline Neutrino Facility (LBNF) and the Neutrinos and Main Injector (NuMI) beam lines at Fermilab. The pulsed magnetic horns are powered by high current electricity through long striplines. In addition to requirements for low inductance and voltage standoff, the striplines must survive in a harsh radiation environment for the operational life of the component, specified as the 100 million pulses requirement for LBNF. Each stripline assembly consists of four (eight layers that splits off to 2 pairs of four layers at the horn interface) layers of Al 6101-T6. As an electromechanical system, the stripline layers are bolted together with ceramic isolators for electrical insulation and connections must facilitate passive cooling and mechanical stability. The striplines experience vibrational force in addition to clamping force, repetitive thermal and electro-magnetic loading. The holes of stripline plates for ceramic joints represent one of the weak links for potential failure [1,2]. By characterizing the contact behavior of these joints and optimizing their damping properties through finite element analysis and experimental modal analysis, stripline performance and longevity can be improved. This study not only helps predict the behavior of the striplines but also improves their performance to meet the required operational lifetime.

Liu, Zunping [Fermilab]↗
DOE OSTI2025

First-principles elucidation of defect-mediated Li transport in hexagonal boron nitride

Hexagonal boron nitride (hBN) is a promising candidate as a protective membrane or separator in Li-ion and Li–S batteries, given its excellent chemical stability, mechanical robustness, and high thermal conductivity. In addition, hBN can be functionalized by introducing defects and dopants, or be directly integrated into other active components of batteries, which further augments its appeal to the field. Here, we use first-principles simulations to evaluate the role of atomic defects in hBN in regulating the Li-ion diffusion mechanism and associated kinetics. Specifically, the following four distinct types of vacancy defects are considered: isolated single B and N vacancies, a B–N vacancy pair, and a B 3 N vacancy cluster. It is found that these defect sites generally favor Li intercalation and out-of-plane diffusion but slow down in-plane Li-ion diffusion due to a strong Li trapping effect at the defect sites. Such a trapping effect is, however, highly local such that it does not necessarily affect the overall Li-ion conductivity in defected hBN layers. The present systematic evaluation of the impact of atomic defects on Li ion migration and accompanied charge analysis of hBN lattice in response to Li-ion diffusion provide a mechanistic understanding of Li-ion transport behavior in defected hBN and highlight the potential of defect engineering to achieve optimal material performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

De novo synthesis and near atomic resolution imaging of host immune receptors critical for pathogen recognition (Abbreviated Final Report)

The innate immune system serves as the body’s first line of defense against invading pathogens, responding rapidly through the deployment of immune cells at common sites of infection, such as the skin and airways. These immune-cell sentinels express a range of highly conserved receptors, including Toll-like receptors (TLRs), which recognize and bind to pathogen-derived components. This recognition event triggers intracellular signaling cascades that initiate and coordinate immune responses. Despite their significance, the complete structural characterization of full-length TLRs, including their extracellular domain (ECD), transmembrane domain (TMD), and Toll/interleukin-1 receptor (TIR) domain, remains incomplete. In this study, we examined the expression and isolation of human TLR4 incorporated into nanodiscs using two approaches: a cell-free synthesis system and a cell-based transfection strategy employing Expi293F cells derived from the human embryonic kidney lineage. Our findings demonstrate that NLP-bound human TLR4 produced via the cell-based method yielded functional protein suitable for time-resolved single-particle cryo-electron microscopy (cryo-EM). This advancement enables structural characterization of full-length TLR4, maintaining the integrity of its extracellular domain, transmembrane domain, and Toll/Interleukin-1 receptor (TIR) domain.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

The [4Fe-4S] Cluster of HydF Is Essential for [FeFe]-Hydrogenase Maturation

The organometallic H-cluster of the [FeFe]-hydrogenase is assembled in vivo through a complex process requiring the action of three dedicated maturation enzymes, HydG, HydE, and HydF, as well as the aminomethyl-lipoyl-H-protein (H met ) of the glycine cleavage system (GCS). Here we probe the role of HydF and its [4Fe-4S] cluster in [FeFe]-hydrogenase maturation by using a defined semisynthetic approach in which [Fe I 2 (μ-SH) 2 (CO) 4 (CN) 2 ] 2– ([2Fe] E ) is used to bypass HydE and HydG, and GCS components are used in place of cell lysate. We show that inclusion of the iron–sulfur carrier protein NfuA and the high-CO-affinity myoglobin variant Mb H64L provides dramatically improved hydrogenase activities up to 828 μmol/min/mg, equivalent to the best reported activities for Chlamydomonas reinhardtii [FeFe]-hydrogenase isolated from the native organism. Apo-HydF lacking a [4Fe-4S] cluster provides very little hydrogenase activity; however, full maturation is restored with the addition of NfuA, which we demonstrate reconstitutes the [4Fe-4S] cluster of HydF. In addition, a HydF variant lacking a [4Fe-4S] cluster by changing two cysteine ligands to alanine is completely unable to support either semisynthetic maturation using [2Fe] E , or full maturation using HydG and HydE, even in the presence of NfuA, demonstrating that the HydF [4Fe-4S] cluster is absolutely essential for [FeFe]-hydrogenase maturation. The possibility that the HydF [4Fe-4S] cluster plays a role in direct binding of [2Fe] E is negated by our results with the HydF D311C variant, which demonstrate that the labile Asp311 cluster ligand is not essential for [2Fe] E binding and HydA maturation. We therefore conclude that [2Fe]E binds HydF adjacent to, but not directly coordinated to, the [4Fe-4S] cluster. The HydF [4Fe-4S] cluster is proposed to be essential due to its impact on the [2Fe] E binding orientation and the ability of the HydF/[2Fe] E complex to form productive interactions with H met or the H met /T-protein complex during DTMA ligand biosynthesis.

cluster chemistry↗
DOE OSTI2023

Small Reactors in Microgrids: Technology Modeling and Selection (Net-Zero Microgrid Program Project Report)

This report demonstrates the capabilities of the net-zero microgrid (NZM) Xendee platform for modeling an SR module with electricity, heat extraction and thermal storage in microgrids configurations. The model effectively captures the most important technical and economic considerations for SR technology specific analysis: cost and operational characteristics of SR technology and financial costs and incentives. The model can analyze multiple scenarios to establish metrics for cost-competitive and zero-carbon microgrids connected to the grid or completely isolated. The model is fully integrated within the Xendee platform for modeling and analysis of clean energy microgrids with storage and generation from renewable energy sources. The model captures the capabilities, constraints, and nuances of SR by incorporating parameters related to plant economics, design efficiency and performance, plant operation and component and fuel lifespan. The cost and operational parameters modeled in the SR module are specific to the technology selected for integration in the microgrid. Cost parameters recognize advanced nuclear technology for modular production and installation based on economies of scale from factory manufacture and related commissioning, and cost reduction through technology maturation—first-of-a-kind (FOAK) and nth-of-a-Kind (NOAK). The cost parameters include installation, operations and maintenance (O&M), fuel refueling cycle, and reactor life. Installation cost reflects economies of scale due to unit sizing at scale and colocation. O&M economies of scale for both fixed- and variable-cost fuel life-cycle costs are incurred at every refueling interval, with separate front- and back-end fuel costs, as well as waste-handling and disposition costs. This report investigates key characteristics of different SR technologies suitable for microgrid applications, including design principles, sizing, coolant properties, temperature ratings, fuel structures, and life-cycle considerations. This also includes fuel technologies applicable to these SR systems, alongside strategies for nuclear-waste and spent-fuel management and approaches to address safety, security, and proliferation challenges. Four primary groups of SR technologies are examined: water-cooled, liquid-metal-cooled, high-temperature gas-cooled, and molten-salt-cooled systems. In this report, an initial guideline for technology selection is established, aligning the characteristics of the technologies with the requirements of microgrids. The selection of technology in a microgrid is influenced by various factors, including financial capacity, location and accessibility, demand type and characteristics, reliability and resilience requirements, area constraints, and the lifespan of the microgrid. The types of electrical and non-electrical applications within the microgrid also play a significant role in technology selection. The characteristics of SRs, such as their smaller size, modularity, transportability, long refueling interval, improved safety features, ability to operate in autonomous or semi-autonomous mode, and provision of high-grade heat, are particularly appealing for microgrids. Furthermore, a list of considerations for implementing SRs in microgrids is outlined. The SR model is created to be continuously improved with the acquisition of actual data on investment and operational costs, experience with supply chains, production at scale, and field deployments. In the near term, performance data on applications in microgrids will become available from lessons learned from laboratory tests, such as those planned for the Microreactor Applications Research Validation and Evaluation Project (MARVEL), led by Idaho National Laboratory (INL). The SR model incorporates scenario data and known SR design specifications, enabling technoeconomic analysis for SR deployment in microgrids. It specifically considers the distinctive attributes of SRs as generators in technoeconomic studies. SRs can be modeled and analyzed with generation from renewable-energy sources, energy storage, and flexible loads over a range of functionality and applications. This offers a comprehensive tool for feasibility studies, scenario development, and sensitivity analysis for “what-if” consideration of any range of assumptions about SRs in microgrids and other aggregations of distributed-energy resources, including virtual power plants.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

RANGERS: Methodology Report on Design and Performance Assessment of Engineered Barrier Systems in a Salt Repository for HLW/SNF

Salt formations are one of the potential host rocks for the final disposal of high-level radioactive waste (HLW) in deep geological repositories, both in Germany and the United States. The safe isolation of radioactive waste in these repositories relies on a multi-barrier system, combining engineered and natural barriers. The natural barrier is provided by the salt rock itself, known for its self-sealing properties and long-term stability. The engineered barrier, on the other hand, comprises sealing components strategically placed within the repository to enhance its containment capabilities. In both Germany and the United States, long-term safety assessments require demonstrating the integrity of the natural barrier for a period of up to 1 million years. Concurrently, the engineered barrier system (EBS) must maintain its structural and functional integrity until the long-term sealing, such as the granular salt backfill material, has re-consolidated to its final low porosity and permeability. Based on extensive expertise and experience with engineered barriers in salt formations, BGE TECHNOLOGY GmbH and Sandia National Laboratories have partnered to develop a robust methodology for the integrity and performance assessment of EBS in HLW repositories through the RANGERS project. This collaborative effort aims to establish a unified approach to geotechnical engineering, repository design, integrity and performance evaluation of EBS in salt repositories.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗