Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “complex aqueous solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Solution phase high repetition rate laser pump x-ray probe picosecond hard x-ray spectroscopy at the Stanford Synchrotron Radiation Lightsource

We present a dedicated end-station for solution phase high repetition rate (MHz) picosecond hard x-ray spectroscopy at beamline 15-2 of the Stanford Synchrotron Radiation Lightsource. A high-power ultrafast ytterbium-doped fiber laser is used to photoexcite the samples at a repetition rate of 640 kHz, while the data acquisition operates at the 1.28 MHz repetition rate of the storage ring recording data in an alternating on-off mode. The time-resolved x-ray measurements are enabled via gating the x-ray detectors with the 20 mA/70 ps camshaft bunch of SPEAR3, a mode available during the routine operations of the Stanford Synchrotron Radiation Lightsource. As a benchmark study, aiming to demonstrate the advantageous capabilities of this end-station, we have conducted picosecond Fe K-edge x-ray absorption spectroscopy on aqueous [FeII(phen)3]2+, a prototypical spin crossover complex that undergoes light-induced excited spin state trapping forming an electronic excited state with a 0.6–0.7 ns lifetime. In addition, we report transient Fe Kβ main line and valence-to-core x-ray emission spectra, showing a unique detection sensitivity and an excellent agreement with model spectra and density functional theory calculations, respectively. Notably, the achieved signal-to-noise ratio, the overall performance, and the routine availability of the developed end-station have enabled a systematic time-resolved science program using the monochromatic beam at the Stanford Synchrotron Radiation Lightsource.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Elucidating the Atomic Structures of the Gel Layer Formed during Aluminoborosilicate Glass Dissolution: An Integrated Experimental and Simulation Study

The altered glasses produced during aqueous dissolution of silicate and borosilicate glasses are among the most complex structures to understand at the atomic level due to their amorphous nature, random porosity and various levels of hydration. In this study, we gained insights of the complex atomic structures of altered aluminoborosilicate glasses by combining a range of experimental and computational approaches. The altered glasses were prepared by dissolution of three glasses with varying level of alumina in acid for 7 days. A comprehensive set of experimental [elemental analysis, high-energy X-ray diffraction, 29 Si and 27 Al solid-state nuclear magnetic resonance (NMR), and O 1s X-ray photoelectron spectroscopy (XPS)] and modeling (molecular dynamics (MD) simulations using non-reactive and reactive force fields) were used to study the atomic structures of these altered glasses. Elemental analysis showed that most of the B in the pristine glasses was leached into the solution and was not contained in the altered glass. The 29 Si and 27 Al solid-state NMR spectra revealed that the altered glasses have more polymerized silicate network as compared to those in the pristine glasses due to the reformation of linkages among Si and Al oxygen polyhedral in the altered glasses. The bridging and non-bridging (or hydroxyl O) atoms in the altered glasses were also quantified from their O 1s XPS spectra. Atomic structure models of the altered glasses were constructed by using MD simulations using the reactive force field based on the compositional information obtained from experiments. Various pore structures were generated using the charge-scaling (CS) method by using different initial densities and CS temperatures; the best CS parameters of each alternated glass were then determined by comparing with the experimental structure factors obtained from high energy X-ray diffraction. Pore and the atomic structures and vibrational properties around these pore surfaces were analyzed. Furthermore, these results from this comprehensive study thus provides a realistic insight into the pore morphology, atomic structure, and vibrational properties of altered glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pb Sorption at the Barite (001)–Water Interface

Sorption of ions at the mineral-water interface is an important factor that determines the fate of toxic metals in the environment. Here, we use barite as a model substrate to understand the interaction of toxic-metal lead (Pb) with ionic crystals. The coverage and location of Pb sorbed to the (001) surface was measured as a function of aqueous Pb concentration ([Pb] aq ) using in situ specular resonant anomalous X-ray reflectivity (RAXR) to determine the sorption capacity and process. In this work, the results show that Pb sorption occurs via incorporation (primarily within the top barite layer similar to 3 angstrom in depth) and adsorption (mostly as an inner-sphere complex at similar to 2 angstrom in height) simultaneously. Both the incorporated and adsorbed Pb coverages increase with increasing [Pb] aq up to [Pb] aq similar to 200 mu M, above which the adsorbed fraction increases more rapidly than the incorporated fraction. This enhanced adsorption has a height distribution that is further extended (>= 15 angstrom from the surface) than that observed in lower [Pb] aq . This change in distribution is interpreted as arising from additional sorption of outer-sphere species or Pb-bearing phases precipitated on the surface. Desorption experiments in Pb-free solutions show that the incorporated fraction is more resistant to removal than the adsorbed fraction, consistent with the speciation-dependent stabilities premised in the classical sorption models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the Surprising Ionic Conductivity Maximum in Zn(TFSI) 2 Water/Acetonitrile Mixture Electrolytes

Aqueous electrolytes composed of 0.1 M zinc bis-(trifluoromethyl-sulfonyl)-imide (Zn-(TFSI) 2 ) and acetonitrile (ACN) were studied using combined experimental and simulation techniques. The electrolyte was found to be electrochemically stable when the ACN V% is higher than 74.4. In addition, it was found that the ionic conductivity of the mixed solvent electrolytes changes as a function of ACN composition, and a maximum was observed at 91.7 V% of ACN although the salt concentration is the same. This behavior was qualitatively reproduced by molecular dynamics (MD) simulations. Detailed analyses based on experiments and MD simulations show that at high ACN composition the water network existing in the high water composition solutions breaks. As a result, the screening effect of the solvent weakens and the correlation among ions increases, which causes a decrease in ionic conductivity at high ACN V%. Furthermore, this study provides a fundamental understanding of this complex mixed solvent electrolyte system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Prediction of stability constants of metal–ligand complexes by machine learning for the design of ligands with optimal metal ion selectivity

The new LOGKPREDICT program integrates HostDesigner molecular design software with the machine learning (ML) program Chemprop. By supplying HostDesigner with predicted log K values, LOGKPREDICT enhances the computer-aided molecular design process by ranking ligands directly by metal–ligand binding strength. Harnessing reliable experimental data from a historic National Institute of Standards and Technology (NIST) database and data from the International Union of Pure and Applied Chemistry (IUPAC), we train message passing neural net algorithms. The multi-metal NIST-based ML model has a root mean square error (RMSE) of 0.629 ± 0.044 (R 2 of 0.960 ± 0.006), while two versions of lanthanide-only IUPAC-based ML models have, respectively, RMSE of 0.764 ± 0.073 (R 2 of 0.976 ± 0.005) and 0.757 ± 0.071 (R 2 of 0.959 ± 0.007). For relative log K predictions on an out-of-sample set of six ligands, demonstrating metal ion selectivity, the RMSE value reaches a commendably low 0.25. Here we showcase the use of LOGKPREDICT in identifying ligands with high selectivity for lanthanides in aqueous solutions, a finding supported by recent experimental evidence. We also predict new ligands yet to be verified experimentally. Therefore, our ML models implemented through LOGKPREDICT and interfaced with the ligand design software HostDesigner pave the way for designing new ligands with predetermined selectivity for competing metal ions in an aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Probing electrolyte–silica interactions through simulations of the infrared spectroscopy of nanoscale pores

The structural and dynamical properties of nanoconfined solutions can differ dramatically from those of the corresponding bulk systems. Understanding the changes induced by confinement is central to controlling the behavior of synthetic nanostructured materials and predicting the characteristics of biological and geochemical systems. A key outstanding issue is how the molecular-level behavior of nanoconfined electrolyte solutions is reflected in different experimental, particularly spectroscopic, measurements. This is addressed here through molecular dynamics simulations of the OH stretching infrared (IR) spectroscopy of NaCl, NaBr, and NaI solutions in isotopically dilute HOD/D 2 O confined in hydroxylated amorphous silica slit pores of width 1–6 nm and pH ~2. In addition, the water reorientation dynamics and spectral diffusion, accessible by pump–probe anisotropy and two-dimensional IR measurements, are investigated. In this work, the aim is to elucidate the effect of salt identity, confinement, and salt concentration on the vibrational spectra. It is found that the IR spectra of the electrolyte solutions are only modestly blue-shifted upon confinement in amorphous silica slit pores, with both the size of the shift and linewidth increasing with the halide size, but these effects are suppressed as the salt concentration is increased. This indicates the limitations of linear IR spectroscopy as a probe of confined water. However, the OH reorientational and spectral diffusion dynamics are significantly slowed by confinement even at the lowest concentrations. The retardation of the dynamics eases with increasing salt concentration and pore width, but it exhibits a more complex behavior as a function of halide.

Mesoporous material↗
DOE OSTI2025

The Role of Interfaces and Charge for Chemical Reactivity in Microdroplets

A wide variety of reactions are reported to be dramatically accelerated in aqueous microdroplets, making them a promising platform for environmentally clean chemical synthesis. However, to fully utilize the microdroplets for accelerating chemical reactions requires a fundamental understanding of how microdroplet chemistry differs from that of a homogeneous phase. Here, in this work, we provide our perspective on recent progress to this end, both experimentally and theoretically. We begin by reviewing the many ways in which microdroplets can be prepared, creating water/hydrophobic interfaces that have been frequently implicated in microdroplet reactivity due to preferential surface adsorption of solutes, persistent electric fields, and their acidity or basicity. These features of the interface interplay with specific mechanisms proposed for microdroplet reactivity, including partial solvation, possible gas phase channels, and the presence of highly reactive intermediates. We especially highlight the role of droplet charge and associated electric fields, which appears to be key to understanding how certain reactions, like the formation of hydrogen peroxide and reduced transition metal complexes, are thermodynamically possible in microdroplets. Lastly, we emphasize opportunities for theoretical advances and suggest experiments that would greatly enhance our understanding of this fascinating subject.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sulfur-functionalized solid-phase materials for the selective separation of arsenic and selenium

Radioactive arsenic (As) isotopes are of growing interest for applications in nuclear medicine, national security, and environmental research. Recent efforts at the Facility for Rare Isotope Beams (FRIB) have focused on aqueous harvesting of selenium-72,73 ( 72,73 Se) and their daughter isotopes, arsenic-72,73 ( 72,73 As), which are particularly valuable for medical applications and nuclear data studies, respectively. Both conventional isotope production and harvesting methods require chemical separations to purify radioactive As from parent and co-produced Se radioisotopes. While several solid-phase separation methods for As and Se exist, many depend on complex oxidation state control or highly acidic conditions. This study presents results for sulfur-based solid-phase materials selected to enable uptake at lower acidity and eliminate the need for intricate redox chemistry. Specifically, the performance of three covalently bound sulfur-based ligands were evaluated: (1) thiophenol-polystyrene, (2) propanethiol-silica, and (3) thiourea-silica. Uptake characteristics—including distribution coefficients (Dw), kinetics, and column separation behavior—were assessed using 75 Se and 73 As in hydrochloric (HCl) acid and nitric (HNO 3 ) solutions. The resins demonstrated high-yield (>95%) and high-purity As recovery across a range of HCl concentrations. Comparable results in HNO 3 were achieved when combined with anion exchange chromatography. Furthermore, the potential application of these materials for medical isotope generators was also investigated through ligand stability and repeated elution studies. Overall, sulfur leaching from the resins was negligible at the concentrations relevant for these separations but increased with higher acid concentrations.

Arsenic↗
DOE OSTI2024

Application of the immobilized low-activity waste glass corrosion model to the static dissolution of 24 statistically-designed alkali-borosilicate waste glasses

Glass corrosion models that capture the complex mechanisms of the glass-water reaction enable the prediction of nuclear waste glass durability in disposal scenarios. Parameterization of such models is challenging because of the need to capture changes in corrosion behavior with time, reaction conditions, and glass composition. In this report we describe and employ the immobilized low activity waste (ILAW) glass corrosion model (IGCM) in geochemical simulations of static dissolution tests, at two temperatures (40 °C and 90 °C), for a matrix of 24 enhanced low activity waste (eLAW) glasses statistically designed to cover a processable composition space defined by 8 major glass components (Al 2 O 3 , B 2 O 3 , CaO, Na 2 O, SiO 2 , SnO 2 , ZrO 2 , and Others as defined in the text). The IGCM includes a first-order chemical affinity term and an ion-exchange term that represents the net exchange of Na+ ions in the pristine glass with protons in aqueous solution. Constant, time-dependent, and time- and pH-dependent functional forms of the ion-exchange term are evaluated to reproduce the change in corrosion behavior with time in saturated, static dissolution tests. The agreement with measured aqueous concentrations of the main glass components (B, Na, and Si) improved significantly upon addition of a time-dependent term, which therefore constitutes a simple representation of the glass-water reaction progress. Due to the limited changes in pH in the static dissolution tests, past a short initial period of rapid increase, addition of a pH dependent term did not appreciably improve the fits, indicating that comprehensive model parameterization requires more than one type of glass corrosion test to capture a wide range of solution chemistries. IGCM parameters were found to be dependent on glass composition, and the parameter sets generated in this work will enable the development of composition–parameter correlation models that offer the promise of predicting IGCM parameters, and thus glass corrosion behavior, solely based on glass composition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Microwave-Based Synthesis of Functional Morphological Variants and Carbon Nanotube-Based Composites of VS 4 for Electrochemical Applications

A novel facile, fast, and efficient microwave-assisted method was developed to synthesize a number of diverse nanostructured motifs (ranging from nanorods to nanoflowers) of VS 4 along with its associated composite heterostructures, VS 4 /multi-walled carbon nanotube (MWNT; i.e., multi-walled carbon nanotubes). Specifically, we have probed and correlated the effects of a number of specific experimental variables, including primarily precursor, solvent, temperature, and time. We noted that nanorods formed more readily with VO(acac) 2 as the vanadium precursor and n-methyl-2-pyrrolidone (NMP) as a polar reaction solvent. By contrast, we determined that hierarchical three-dimensional (3D) nanoflower-like assemblies, ranging in size from 100 to 200 nm in average diameter, could be controllably synthesized by using Na 3 VO 4 as the vanadium precursor and an aqueous water: polar solvent mixture as the reaction medium. We also observed that VS 4 disintegrates, when in the presence of either air, solution, or a combination of these environments, and established that the extent of VS4 nanorod decomposition could be almost fully prevented by storage under nitrogen. From an application’s perspective, our VS 4 is electrochemically active and shows behavior, consistent with the literature. In particular, as compared with pristine VS 4 nanorods alone, we observed enhanced electrochemical activity with (i) 3D hierarchical flower-like motifs, (ii) unique necklace-like VS 4 nanorod–MWNT composites, and (iii) samples in which as-prepared VS4 nanorods had been annealed. Moreover, we found that the rational application of specific physical and chemical processing treatments, such as (i) thermal annealing to improve crystallinity, (ii) the addition of MWNTs to form conductive composites, and (iii) the evolution of morphology from one-dimensional (1D) nanorods to more complex 3D nanoflowers, was favorable to the resulting electrochemical performance with respect to increasing stability and reversibility.

25 ENERGY STORAGE↗
DOE OSTI2026

Hydration and transport properties of cesium hydroxide and mixed cesium hydroxide–sodium nitrite aqueous solutions

Here, this study explores the hydration and transport properties of aqueous cesium hydroxide (CsOH) solution, with or without 1 molar (M) sodium nitrite (NaNO 2 ). Historic studies of electrolyte solutions indicate that Cs + ions decrease viscosity and increase diffusion rates, whereas OH − ions have the opposite effect. Here, the influence of OH − was dominant in CsOH solutions, leading to increased viscosity and reduced diffusion rates. There was a linear relationship between diffusion coefficients and water activity, emphasizing the significant role of ion–water interactions in determining transport properties. This may be because the interaction between Cs + and the anions is weak even when they are in direct contact with each other. The weakness of the ion-pairing was established through thermodynamic analysis. The findings suggest that ion-pairing is not the only important interaction controlling transport properties when ion-pairing is weak. Nonetheless, ion-pairing or obstructions did result in more sluggish transport properties as electrolyte concentrations increased. Overall, the research enhances the understanding of the complexities underlying ion interactions in multicomponent solutions.

Reynolds, Jacob G. [Hanford Site (HNF), Richland, ↗
DOE OSTI2026

Alkali Cation-Mediated Modulation of CO 2 Reduction Activity on Tin Electrodes in [EMIM][BF 4 ]/H 2 O Electrolytes

The development of efficient CO 2 reduction technologies hinges upon a thorough understanding of the intricate interplay between solution cations and the characteristics of the electrode surface. Recently, ionic liquids (ILs) have emerged as promising electrolytes for the CO 2 reduction reaction. However, the effect of alkali cations on the electrochemical CO 2 reduction (CO 2 R) reaction remains unclear in ILs. Here, in this report, we studied alkali cation effects by assessing the electrocatalytic CO 2 R activity with the IL 1-ethyl-3-methylimidazolium tetrafluoroborate, [EMIM][BF 4 ], in water with alkali metal co-cations (i.e., Li + , Na + , and K + ) using a polycrystalline Sn catalyst. Contrary to previous findings in purely aqueous media with inorganic cations, where alkali cations strongly enhance CO 2 R via pH modulation and strengthening of interfacial electric fields, alkali cations in electrolytes containing the IL [EMIM][BF4] negatively impact CO 2 R activity on Sn electrodes. These results were attributed to the larger radius and higher concentration of the IL organic cation [EMIM] + that mitigates the impact of alkali cations. These findings highlight the complex interplay between IL cations and alkali metals in shaping CO 2 R performance.

Chemistry↗
DOE OSTI2022

Uptake of N 2 O 5 by aqueous aerosol unveiled using chemically accurate many-body potentials

The reactive uptake of N 2 O 5 to aqueous aerosol is a major loss channel for nitrogen oxides in the troposphere. Despite its importance, a quantitative picture of the uptake mechanism is missing. Here we use molecular dynamics simulations with a data-driven many-body model of coupled-cluster accuracy to quantify thermodynamics and kinetics of solvation and adsorption of N 2 O 5 in water. The free energy profile highlights that N 2 O 5 is selectively adsorbed to the liquid–vapor interface and weakly solvated. Accommodation into bulk water occurs slowly, competing with evaporation upon adsorption from gas phase. Leveraging the quantitative accuracy of the model, we parameterize and solve a reaction–diffusion equation to determine hydrolysis rates consistent with experimental observations. We find a short reaction–diffusion length, indicating that the uptake is dominated by interfacial features. The parameters deduced here, including solubility, accommodation coefficient, and hydrolysis rate, afford a foundation for which to consider the reactive loss of N 2 O 5 in more complex solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Integrating computation and experiment to investigate photoelectrodes for solar water splitting at the microscopic scale.

CONSPECTUS: Photoelectrochemical water-splitting is a promising and sustainable way to store the energy of the sun in chemical bonds and use it to produce hydrogen gas, a clean fuel. The key components in photoelectrochemical cells (PECs) are photoelectrodes, including a photocathode that reduces water to hydrogen gas and a photoanode that oxidizes water to oxygen gas. Materials used in photoelectrodes for PECs must effectively absorb sunlight, yield photogenerated carriers, and exhibit electronic properties that enable the efficient shuttling of carriers to the surface to participate in relevant water-splitting reactions. Discovering and understanding the key characteristics of optimal photoelectrode materials is paramount to the realization of PEC technologies. Oxide-based photoelectrodes can satisfy many of these materials requirements, including stability in aqueous environments, band edges with reasonable alignment with the redox potentials for water splitting, and ease of synthesis. However, oxide photoelectrodes generally suffer from poor charge transport properties and considerable bulk electron-hole separation, and they have relatively large band gaps. Numerous strategies have been proposed to improve these aspects and understand how these improvements are reflected in the photoelectrochemical performance. Unfortunately, the structural and compositional complexity of multinary oxides accompanied by the inherent complexity of photoelectrochemical processes makes it challenging to understand the individual effects of composition, structure, and defects in the bulk and on the surface on a material's photoelectrochemical properties. The integration of experiment and theory has great potential to increase our atomic-level understanding of structure-composition-property relationships in oxide photoelectrodes. In this Account, we describe how integrating experiment and theory is beneficial for achieving scientific insights at the microscopic scale. We highlight studies focused on understanding the role of (i) bulk composition via solid-state solutions, intercalation, and comparison with isoelectronic compounds, (ii) dopants for both the anion and cation and their interactions with oxygen vacancies, and (iii) surface/interface structure in the photocurrent generation and photoelectrochemical performance in oxide photoelectrodes. In each instance, we outline strategies and considerations for integrating experiment and theory and describe how this integration led to valuable insights and new directions in uncovering structure-composition-property relationships. Our aim is to demonstrate the unique value of combining experiment and theory in studying photoelectrodes and to encourage the continued effort to bring experiment and theory in closer step with each other.

Wang, Wennie↗
DOE OSTI2025

UV-Vis spectrophotometric determination of rare earth elements (REE) speciation at near-neutral to alkaline pH. Part II: hydrolysis of Er from 25 to 75 °C

Aqueous speciation of rare earth elements (REE) controls their mobilization, fractionation, and enrichment in the natural waters. Geochemical modeling of their speciation is key to improve our understanding of the formation of economic mineral deposits, for developing mineral separation and mine tailing recovery technologies, and for characterizing the geochemistry of thermal water. However, our ability to predict the fate of REE in a wide pH and temperature range is limited by the scarcity of thermodynamic data for the REE hydroxyl complexes. In part I of this study (H. J. Han and A. P. Gysi, Dalton Trans., 2024, 53, 13129–13141), the optical properties of m-cresol purple (mCP) were determined using UV-Vis spectrophotometry between 25 and 75 °C in order to develop a method for deriving the hydrolysis constants of erbium (Er). Here, UV-Vis spectrophotometry experiments were conducted as a function of temperature between 35 and 75 °C to determine the hydrolysis of Er in near-neutral to alkaline solutions using mCP as an in situ pH color indicator. Here, the experiments were conducted with Er concentrations from 0 to ~0.253 mmol kg –1 in low ionic strength solutions (≤0.001 mol kg –1 ).

58 GEOSCIENCES↗
DOE OSTI2025

Extracted Water Induces Concentration Fluctuations in Model Ternary Liquid–Liquid Extraction System

Organic phase aggregation and phase splitting are two important (and connected) phenomena in liquid–liquid extraction of metal ions. Previously, we demonstrated how structure in binary mixtures of extractant and diluent originates from concentration fluctuations associated with the so-called “third-phase formation” liquid–liquid phase instability. For more complex systems, we sought to understand how extracted aqueous components affect these concentration fluctuations. Here, in this study, we use small-angle X-ray scattering and molecular dynamics simulations to investigate organic phase structural changes upon contact with water in a model ternary system of water/alkane/extractant. Critical exponents were determined from scattering with temperature variation and were consistent with mean field values. Then, by controlling the water content in the organic phase through direct dissolution of fixed quantities at constant temperature, we relate the observed increase in the fluctuation length scale to changes to the spinodal temperature of the third-phase formation phase boundary. We find a roughly linear relationship between water concentration and the spinodal temperature and a similar slope in that relationship for different linear alkane diluents. This suggests that the mechanism by which water extraction impacts the organic phase structure is to enhance concentration fluctuations through the introduction of additional polar extractant-water complexes, which increases the spinodal temperature and thereby decreases the reduced temperature, i.e., the distance to the instability. This explanation for how solutes induce aggregation in liquid–liquid extraction organic phases may extend to more complex systems, explaining the large increases in correlation lengths reported under high acid and metal loading.

Bonnett, Brittany L. [Argonne National Laboratory ↗
DOE OSTI2025

Dual-Wavelength Simultaneous Patterning of Degradable Thermoset Supports for One-Pot Embedded 3D Printing

Vat photopolymerization (VP) techniques have enabled the fabrication of complex geometries while balancing high precision and fast processing times. 3D printed objects are traditionally built layer-by-layer with newly cured layers being structurally supported by previous ones. Fabricating unsupported features such as overhangs and arches risks misalignment and sagging, limiting the range of accessible designs. To overcome this issue, support structures are fabricated along with the primary object as temporary scaffolds that provide stability and conserve print fidelity. For VP specifically, patterning dissolvable sacrificial supports is attractive to avoid manual removal after printing. In this study, we demonstrate a base-degradable thermoset to pattern print supports in a one-pot formulation along with the primary structural material. Efficient printing is enabled using a dual-wavelength negative imaging (DWNI) DLP printer that patterns the degradable thermoset with visible light and the permanent network with UV light, which are simultaneously projected using a single digital micromirror device (DMD). Printed objects undergo thermal postprocessing to enhance the final conversion of the primary material, after which thermoset supports are degraded in a basic, aqueous solution. This approach provides a robust method for the dual-wavelength patterning of sacrificial thermoset supports, broadening the range of accessible 3D printable materials and geometries.

3D printing↗
DOE OSTI2022

Insights into Sorption and Molecular Transport of Aqueous Glucose into Zeolite Nanopores

Liquid-phase heterogeneous catalysis using zeolites is important for biomass conversion to fuels and chemicals. There is a substantial body of work on gas-phase sorption in zeolites with different topologies; however, studies investigating the diffusion of complex molecules in liquid medium into zeolitic nanopores are scarce. Here, we present a molecular dynamics study to understand the sorption and diffusion of aqueous β-d-glucose into β-zeolite silicate at T = 395 K and P = 1 bar. Through 2-μs-long molecular dynamics trajectories, we reveal the role of the solvent, the kinetics of the pore filling, and the effect of the water model on these properties. We find that the glucose and water loading is a function of the initial glucose concentration. Although the glucose concentration increases monotonically with the initial glucose concentration, the water loading exhibits a nonmonotonic behavior. At the highest initial concentration (~20 wt %), we find that the equilibrium loading of glucose is approximately five molecules per unit cell and displays a weak dependence on the water model. Glucose molecules follow a single-file diffusion in the nanopores due to confinement. Here, the dynamics of glucose and water molecules slows significantly at the interface. The average residence time for glucose molecules is an order of magnitude larger than that in the bulk solution, while it is about twice as large for the water molecules. Our simulations reveal critical molecular details of the glucose molecule’s local environment inside the zeolite pore relevant to catalytic conversion of biomass to valuable chemicals.

09 BIOMASS FUELS↗