Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “communications relay”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Space Shuttle S-band antenna system

The NASA Space Shuttle Orbiter presents some very challenging antenna design problems for the S-band Orbiter to ground and Orbiter to relay satellite communications links. The line of sight to the ground and/or relay satellite during the various mission phases dictates an almost omni-directional coverage requirement, but the circuit margins require at least a 3 dB gain over this same coverage region. In addition, the environmental conditions imposed by the Orbiter mission dictate a flush mounted rugged antenna design. A number of potential antenna designs have been evaluated and found not to meet the Orbiter requirements. A small passive array of cavity backed spirals was found to offer the most potential to meet the design requirements. New circuit margin requirements presently under study have forced the consideration of the use of an active transmit/receive phased array design that considerably complicates the antenna design, but provides more than 10 dB of additional gain for circuit margin improvement.

Walton, M. D.↗
NASA NTRS2007

Wireless Instrumentation System and Power Management Scheme Therefore

A wireless instrumentation system enables a plurality of low power wireless transceivers to transmit measurement data from a plurality of remote station sensors to a central data station accurately and reliably. The system employs a relay based communications scheme where remote stations that cannot communicate directly with the central station due to interference, poor signal strength, etc., are instructed to communicate with other of the remote stations that act as relays to the central station. A unique power management scheme is also employed to minimize power usage at each remote station and thereby maximize battery life. Each of the remote stations prefembly employs a modular design to facilitate easy reconfiguration of the stations as required.

Perotti, Jose↗
NASA NTRS1995

Potential future applications for the tracking and data relay satellite II (TDRS II) system

During the conceptual design phases of the tracking and data relay satellite (TDRS) II system provision was made for a future service growth (FSG) payload with an undefined mission. The intent of the FSG was to provide a resource for TDRS II applications which would be available to meet a change in requirements for the operational TDRS II system. This paper summarizes the effect of the consideration of potential FSG applications imposed on the tracking and data relay satellite (TDRS) II system. The following applications were considered as FSG candidates: An optical 650 Mbps space-to-space link (SSL) coupled to an optical or RF downlink, an RF or optical crosslink to extend the baseline TDRS II system coverage, -zone of exclusion (ZOE) closure, relay for lunar communications either RF or optically, and relay for Martian communications either RF or optically. This paper summarizes work done in the 1990 time frame on the above stated applications. Since then, NASA has sponsored several studies (during phase B of the TDRS II development cycle) of the ZOE closure application of the FSG. The purpose of this paper is to report on the efforts previously considered for the FSG. A previous paper was presented at the 1991 Congress related to the second application above. This paper extends this effort to the four stated applications.

Gibbons, Richard C.↗
NASA NTRS1971

VHF Ranging and Position Fixing Experiment Using ATS Satellites: Final Report on Phases 1 and 2, 25 November 1968 - 1 May 1971

The testing program with the ATS-1 and ATS-3 spacecraft showed that geostationary satellites can provide superior communications and position surveillance for mobile craft. Inexpensive modifications to conventional mobile communications equipment aboard the craft can provide reliable, high quality voice and digital communications with distant ground stations and other vehicles, and automatic surveillance of the positions of all the craft by a ground facility. The tests also demonstrated the location and automatic readout of remote data collection platforms. Frequency modulation signals with the narrow audio and radio frequency bandwidths of terrestrial mobile radio communications were relayed through the VHF transponders of the geostationary satellites. The voice and digital communications were far superior in reliability and quality to long-distance mobile communications by other means. It was shown that one satellite can provide nearly uniform high quality performance over approximately one-third of the earth's surface. Position fixes by range measurement from the two satellites were accurate to approximately one nautical mile, except near the equator and the poles.

Source record↗
NASA NTRS1965

Communicating with microwaves.

Microwave communications, discussing radio relay techniques, carrier telephony, satellite microwave communications, television, laser light wave communication, etc

MICROWAVE TRANSMISSION↗
NASA NTRS2022

Characterization of Response Times based on Voice Communication and Traffic Surveillance Data

A barrier to the integration of remotely piloted aircraft operations in the U.S. National Airspace System is the latency of voice communications between the air traffic controller and the remote pilot, and the latency of communication between the aircraft and the remote pilot. The latency can be substantial especially when satellite-based beyond-radio-line-of-sight communication and relay through the aircraft are employed. This study uses voice recordings of controller-pilot communications and aircraft track data to establish a baseline of pilot readback latencies and maneuver detection delays in the current piloted operations. A machine learning pipeline was developed to parse the contents of the air traffic control clearances including the callsigns using natural language processing. After manually validating the results obtained using the pipeline, the average pilot readback latency was found to be about 0.6 seconds. The average latency between the end of maneuver (inferred from track data), initiated by the pilot in response to the clearance, and the end of clearance was found to be about 176 seconds for altitude change commands, 69 seconds for heading change commands, and 182 seconds for speed change commands. The average latency between the beginning of maneuver and the end of clearance was found to be about 17 seconds for altitude change commands, 17seconds for heading change commands, and 25 seconds for speed change commands.

controller-pilot communication, communication late↗
NASA NTRS2022

Characterization of Response Times Based on Voice Communication and Traffic Surveillance Data

A barrier to the integration of remotely piloted aircraft operations in the U.S. National Airspace System is the latency of voice communications between the air traffic controller and the remote pilot, and the latency of communication between the aircraft and the remote pilot. The latency can be substantial especially when satellite-based beyond-radio-line-of-sight communication and relay through the aircraft are employed. This study uses voice recordings of controller-pilot communications and aircraft track data to establish a baseline of pilot readback latencies and maneuver detection delays in the current piloted operations. A machine learning pipeline was developed to parse the contents of the air traffic control clearances including the callsigns using natural language processing. After manually validating the results obtained using the pipeline, the average pilot readback latency was found to be about 0.6 seconds. The average latency between the end of maneuver (inferred from track data), initiated by the pilot in response to the clearance, and the end of clearance was found to be about 176 seconds for altitude change commands, 69 seconds for heading change commands, and 182 seconds for speed change commands. The average latency between the beginning of maneuver and the end of clearance was found to be about 17 seconds for altitude change commands, 17seconds for heading change commands, and 25 seconds for speed change commands.

controller-pilot communication↗
NASA NTRS2004

Spacecraft Orbits for Earth/Mars-Lander Radio Relay

A report discusses a network of spacecraft, in orbit around Mars, used to relay radio communications between Earth stations and mobile exploratory robots (rovers) as well as stationary scientific instruments that have been landed on the Mars surface. The relay spacecraft include two already in orbit plus several others planned to arrive at Mars in the years 2004 through 2008. A major portion of the report is devoted to the orbit of the G. Macroni Orbiter, which is in the midst of an iterative design process and is intended to be the first Mars orbiter designed primarily for radio relay. Candidate orbits are analyzed with a view toward choosing one that maximizes the amount of time available for communication with surface units, taking account of visibility as a function of position, the limit on communication distance at low power, and the fact that surface units can transmit more easily when they are in sunlight. Two promising new orbits for Mars relay satellites are identified: a 1/2-sol apoapsis-at-constant-time-of-day equatorial orbit and a 1/4-sol apoapsis-at-constant-time-of-day, critical-inclination orbit.

Noreen, Gary↗
NASA NTRS1978

Wall Covering

The attractive wall covering shown below is one of 132 styles in the Mirror Magic II line offered by The General Tire & Rubber Company, Akron, Ohio. The material is metallized plastic fabric, a spinoff from space programs. Wall coverings are one of many consumer applications of aluminized plastic film technology developed for NASA by a firm later bought by King-Seeley Thermos Company, Winchester, Massachusetts, which now produces the material. The original NASA use was in the Echo 1 passive communications satellite, a "space baloon" made of aluminized mylar; the high reflectivity of the metallized coating enabled relay of communications signals from one Earth station to another by "bouncing" them off the satellite. The reflectivity feature also made the material an extremely efficient insulator and it was subsequently widely used in the Apollo program for such purposes as temperature control of spacecraft components and insulation of tanks for fuels that must be maintained at very low temperatures. I Used as a wall covering, the aluminized material offers extra insulation, reflects light and I resists cracking. In addition to General Tire, King-Seeley also supplies wall covering material to Columbus Coated Fabrics Division of Borden, Incorporated, Columbus, Ohio, among others.

Source record↗
DOE OSTI2026

Digital Grid Twin–Direct Communication Scheme Test Bed for Assessing Relay-to-Relay Radio Antenna and Optical Fiber Performance and Misoperations

This study introduces a novel “Digital Grid Twin–Direct Communication Scheme” test bed. This advanced platform evaluates point-to-point communication between transmitter and receiver relays with optical fiber and radio omnidirectional antenna systems, implemented at the Advanced Protection lab in the Grid Research Innovation and Development Center at Oak Ridge National Laboratory.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS2016

Considerations for an Earth Relay Satellite with RF and Optical Trunklines

Support for user platforms through the use of optical links to geosynchronous relay spacecraft are expected to be part of the future space communications architecture. The European Data Relay Satellite System (EDRS) has its first node, EDRS-A, in orbit. The EDRS architecture includes space-to-space optical links with a Ka-Band feeder link or trunkline. NASA's Laser Communications Relay Demonstration (LCRD) mission, originally baselined to support a space-to-space optical link relayed with an optical trunkline, has added an Radio Frequency (RF) trunkline. The use of an RF trunkline avoids the outages suffered by an optical trunkline due to clouds, but an RF trunkline will be bandwidth limited. A space relay architecture with both RF and optical trunklines could relay critical realtime data, while also providing a high data volume capacity. This paper considers the relay user scenarios that could be supported, and the implications to the space relay system and operations. System trades such as the amount of onboard processing and storage required, the use of link layer switching vs. network layer routing, and the use of Delay/Disruption Tolerant Networking (DTN) are discussed.

Space Communications↗
NASA NTRS2016

Considerations for an Earth Relay Satellite with RF and Optical Trunklines

Support for user platforms through the use of optical links to geosynchronous relay spacecraft are expected to be part of the future space communications architecture. The European Data Relay Satellite System (EDRS) has its first node, EDRS-A, in orbit. The EDRS architecture includes space-to-space optical links with a Ka-Band feeder link or trunkline. NASA's Laser Communications Relay Demonstration (LCRD) mission, originally baselined to support a space-to-space optical link relayed with an optical trunkline, has added an Radio Frequency (RF) trunkline. The use of an RF trunkline avoids the outages suffered by an optical trunkline due to clouds, but an RF trunkline will be bandwidth limited. A space relay architecture with both RF and optical trunklines could relay critical realtime data, while also providing a high data volume capacity. This paper considers the relay user scenarios that could be supported, and the implications to the space relay system and operations. System trades such as the amount of onboard processing and storage required, the use of link layer switching vs. network layer routing, and the use of Delay/Disruption Tolerant Networking (DTN) are discussed.

Space Communications↗
NASA NTRS2018

NASA Space Network Project Operations Management: Past, Present and Future for the Tracking and Data Relay Satellite Constellation

The NASA Space Network (SN) Operations began with the launch of the first Tracking and Data Relay Satellite (TDRS-1) on April 4, 1983 with on-orbit operations conducted from the White Sands Ground Terminal (WSGT) in Las Cruces, New Mexico. Over the past 35 years, the SN has evolved to its current configuration comprised of four strategically located satellite ground stations and a constellation of ten geosynchronous Tracking and Data Relay Satellites that provide customer support 24 hours a day, 365 days per year, at an unprecedented 99.9% proficiency. The Space Network provides total global Communications, Data Relay, and Tracking services for Low Earth Orbiting (LEO) satellites, Human Space Flight, Expendable Launch Vehicles (ELV) and Scientific missions. This paper will address the Operations Management of the NASA Space Network and the complexities associated with this responsibility, as well as significant mission support highlights.

Sobchak, Ted↗
NASA NTRS2007

Real-Time Wireless Data Acquisition System

Current and future aerospace requirements demand the creation of a new breed of sensing devices, with emphasis on reduced weight, power consumption, and physical size. This new generation of sensors must possess a high degree of intelligence to provide critical data efficiently and in real-time. Intelligence will include self-calibration, self-health assessment, and pre-processing of raw data at the sensor level. Most of these features are already incorporated in the Wireless Sensors Network (SensorNet(TradeMark)), developed by the Instrumentation Group at Kennedy Space Center (KSC). A system based on the SensorNet(TradeMark) architecture consists of data collection point(s) called Central Stations (CS) and intelligent sensors called Remote Stations (RS) where one or more CSs can be accommodated depending on the specific application. The CS's major function is to establish communications with the Remote Stations and to poll each RS for data and health information. The CS also collects, stores and distributes these data to the appropriate systems requiring the information. The system has the ability to perform point-to-point, multi-point and relay mode communications with an autonomous self-diagnosis of each communications link. Upon detection of a communication failure, the system automatically reconfigures to establish new communication paths. These communication paths are automatically and autonomously selected as the best paths by the system based on the existing operating environment. The data acquisition system currently under development at KSC consists of the SensorNet(TradeMark) wireless sensors as the remote stations and the central station called the Radio Frequency Health Node (RFHN). The RFF1N is the central station which remotely communicates with the SensorNet(TradeMark) sensors to control them and to receive data. The system's salient feature is the ability to provide deterministic sensor data with accurate time stamps for both time critical and non-time critical applications. Current wireless standards such as Zigbee(TradeMark) and Bluetooth(Registered TradeMark) do not have these capabilities and can not meet the needs that are provided by the SensorNet technology. Additionally, the system has the ability to automatically reconfigure the wireless communication link to a secondary frequency if interference is encountered and can autonomously search for a sensor that was perceived to be lost using the relay capabilities of the sensors and the secondary frequency. The RFHN and the SensorNet designs are based on modular architectures that allow for future increases in capability and the ability to expand or upgrade with relative ease. The RFHN and SensorNet sensors .can also perform data processing which forms a distributed processing architecture allowing the system to pass along information rather than just sending "raw data points" to the next higher level system. With a relatively small size, weight and power consumption, this system has the potential for both spacecraft and aircraft applications as well as ground applications that require time critical data.

Valencia, Emilio J.↗