Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coaxial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Recirculation patterns in the initial region of coaxial jets.

This experimental study is concerned with the mixing in the initial region of turbulent coaxial streams. The investigation is limited to the low-speed incompressible case with the inner stream of lower velocity than the outer stream. Velocity ratios ranged from infinity to one. The inner to outer stream density ratio was either 4 or 1. Experimental measurements were made with a hot-wire anemometer system, static pressure probes, and shadowgraphy. The data show that a backflow region is formed in this particular apparatus at outer to inner stream velocity ratio of 13 for the homogeneous case and at outer to inner stream velocity ratio of 26 for the heterogeneous case. For higher velocity ratio, a circulating toroidal vortex is established which enhances mixing between the inner and outer streams. This vortex pattern exhibits similarity of velocity with velocity ratio variations.

Rozenman, T.↗
NASA NTRS1973

Investigation of coaxial jet noise and inlet choking using an F-111A airplane

Measurements of engine noise generated by an F-111A airplane positioned on a thrustmeasuring platform were made at angles of 0 deg to 160 deg from the aircraft heading. Sound power levels, power spectra, and directivity patterns are presented for jet exit velocities between 260 feet per second and 2400 feet per second. The test results indicate that the total acoustic power was proportional to the eighth power of the core jet velocity for core exhaust velocities greater than 300 meters per second (985 feet per second) and that little or no mixing of the core and fan streams occurred. The maximum sideline noise was most accurately predicted by using the average jet velocity for velocities above 300 meters per second (985 feet per second). The acoustic power spectrum was essentially the same for the single jet flow of afterburner operation and the coaxial flow of the nonafterburning condition. By varying the inlet geometry and cowl position, reductions in the sound pressure level of the blade passing frequency on the order of 15 decibels to 25 decibels were observed for inlet Mach numbers of 0.8 to 0.9.

Putnam, T. W.↗
NASA NTRS1972

Optimum design of space storable gas/liquid coaxial injectors.

Review of the results of a program of single-element, cold-flow/hot-fire experiments performed for the purpose of establishing design criteria for a high-performance gas/liquid (FLOX/CH4) coaxial injector. The approach and the techniques employed resulted in the direct design of an injector that met or exceeded the performance and chamber compatibility goals of the program without any need for the traditional 'cut-and-try' development methods.

Burick, R. J.↗
NASA NTRS1973

Magnetogasdynamic compression of a coaxial plasma accelerator flow for micrometeoroid simulation.

A new configuration of a coaxial plasma accelerator with self-energized magnetic compressor coil attached is described. It is shown that the circuit may be treated theoretically by analyzing an equivalent circuit mesh. The results obtained from the theoretical analysis are shown to compare favorably with the results measured experimentally. Using this accelerator configuration, glass beads of 125-micron diameter were accelerated to velocities as high as 11 km/sec, while 700-micron-diam glass beads were accelerated to velocities as high as 5 km/sec. The velocities are within the hypervelocity regime of meteroids.

Igenbergs, E. B.↗
NASA NTRS1974

System for stabilizing cable phase delay utilizing a coaxial cable under pressure

Stabilizing the phase delay of signals passing through a pressurizable coaxial cable is disclosed. Signals from an appropriate source at a selected frequency, e.g., 100 MHz, are sent through the controlled cable from a first cable end to a second cable end which, electrically, is open or heavily mismatched at 100 MHz, thereby reflecting 100 MHz signals back to the first cable end. Thereat, the phase difference between the reflected-back signals and the signals from the source is detected by a phase detector. The output of the latter is used to control the flow of gas to or from the cable, thereby controlling the cable pressure, which in turn affects the cable phase delay.

Clements, P. A.↗
NASA NTRS1974

Magnetogasdynamic compression of a coaxial plasma accelerator flow for micrometeoroid simulation

A new configuration of a coaxial plasma accelerator with self-energized magnetic compressor coil attached is described. It is shown that the circuit may be treated theoretically by analyzing an equivalent circuit mesh. The results obtained from the theoretical analysis compare favorably with the results measured experimentally. Using this accelerator configuration, glass beads of 125 micron diameter were accelerated to velocities as high as 11 kilometers per second, while 700 micron diameter glass beads were accelerated to velocities as high as 5 kilometers per second. The velocities are within the hypervelocity regime of meteoroids.

Igenbergs, E. B.↗
NASA NTRS1975

Investigation B: Laminar confined coaxial entrance flow with heat generation

The results of a parametric study on the entrance flow region in a gas core nuclear reactor are presented. The physical system is modeled as laminar confined, coaxial flow with heat generation in the inner fluid. The governing equations include the boundary layer approximations and the assumptions of only radial radiative transport of energy represented as an energy diffusion term. The Von Mises transformation and a zeta transformation are used to transform the equations into nonlinear nonhomogeneous convective-diffusion equations. A unique combination of forward and backward difference equations which yields accurate results at moderate computational times, is used in the numerical method. Results show that the rapidly accelerating, heat generating inner stream actually shrinks in radius as it expands axially.

Bobba, G. K. M.↗
NASA NTRS1975

Characteristics of response factors of coaxial gaseous rocket injectors

The results of an experimental investigation undertaken to determine the frequency dependence of the response factors of various gaseous propellant rocket injectors subject to axial instabilities are presented. The injector response factors were determined, using the modified impedance-tube technique, under cold-flow conditions simulating those observed in unstable rocket motors. The tested injectors included a gaseous-fuel injector element, a gaseous-oxidizer injector element and a coaxial injector with both fuel and oxidizer elements. Emphasis was given to the determination of the dependence of the injector response factor upon the open-area ratio of the injector, the length of the injector orifice, and the pressure drop across the injector orifices. The measured data are shown to be in reasonable agreement with the corresponding injector response factor data predicted by the Feiler and Heidmann model.

Janardan, B. A.↗
NASA NTRS1975

Coaxial injector response to axial instability under simulated cold-flow

The frequency dependence of the admittances and response factors of various gaseous rocket injector configurations subject to axial instabilities under cold-flow conditions, have been measured using the modified impedance-tube technique. The tested configurations simulate the flows in a gaseous-fuel injector, gaseous-oxidizer injector and a coaxial injector with both fuel and oxidizer elements. Comparison of the measured response data with corresponding data predicted by the Feiler and Heidmann model indicates good agreement between the two sets of data.

Janardan, B. A.↗
NASA NTRS1975

Center-line velocity decay in coaxial free jets

The effects of initial nonuniformities in the exit velocity profiles of incompressible coaxial air jets expelled into free air on the fully developed region of the jets is studied experimentally. The primary and annular jet exit velocities were nonuniform, and the average velocity of the primary jet was greater than that of the annular jet. The center-line velocity of the jet in the fully developed region is found to depend on the primary jet exit velocity profile and on the ratio of the central to annular jet average velocities.

Lenzo, C. S.↗
NASA NTRS1976

Theoretical study of reactive and nonreactive turbulent coaxial jets

The hydrodynamic properties and the reaction kinetics of axisymmetric coaxial turbulent jets having steady mean quantities are investigated. From the analysis, limited to free turbulent boundary layer mixing of such jets, it is found that the two-equation model of turbulence is adequate for most nonreactive flows. For the reactive flows, where an allowance must be made for second order correlations of concentration fluctuations in the finite rate chemistry for initially inhomogeneous mixture, an equation similar to the concentration fluctuation equation of a related model is suggested. For diffusion limited reactions, the eddy breakup model based on concentration fluctuations is found satisfactory and simple to use. The theoretical results obtained from these various models are compared with some of the available experimental data.

Gupta, R. N.↗
NASA NTRS1976

Stability of flow of a thermoviscoelastic fluid between rotating coaxial circular cylinders

The stability problem of thermoviscoelastic fluid flow between rotating coaxial cylinders is investigated using nonlinear thermoviscoelastic constitutive equations due to Eringen and Koh. The velocity field is found to be identical with that of the classical viscous case and the case of the viscoelastic fluid, but the temperature and pressure fields are found to be different. By imposing some physically reasonable mechanical and geometrical restrictions on the flow, and by a suitable mathematical analysis, the problem is reduced to a characteristic value problem. The resulting problem is solved and stability criteria are obtained in terms of critical Taylor numbers. In general, it is found that thermoviscoelastic fluids are more stable than classical viscous fluids and viscoinelastic fluids under similar conditions.

Ghandour, N. N.↗
NASA NTRS1976

Numerical computation of transient coaxial entry tube flows

A numerical program was developed to compute transient laminar flows in two dimensions including multicomponent mixing and chemical reaction. The program can compute both incompressible flows and compressible flows at all speeds, and it is applied to describe transient and steady state solutions for low subsonic, coaxial entry, tue flows. Single component, nonreacting flows comprise most of the solutions, but one steady state solution is presented for trace concentration constituents engaging in a second order reaction. Numerical stability was obtained by adding at each calculation point a correction for numerical diffusion errors caused by truncation of the Taylor series used to finite difference the conservation equations. Transient computations were made for fluids initially at rest, then subjected to step velocity inputs that were uniform across each region of the entry plane and were held constant throughout the computation period. For center tube to annulus velocity ratios of 0.5 and 2.0, the bulk fluid in the tube initially moved in plug flow, but strong radial flows developed near the injection plane which moved the fluid into the high shear region between the jets and away from the tube wall.

Wieber, P. R.↗
NASA NTRS1977

Basic coaxial mass driver reference design

The reference design for a basic coaxial mass driver is developed to illustrate the principles and optimization procedures on the basis of numerical integration by programmable pocket calculators. The four inch caliber system uses a single-coil bucket and a single-phase propulsion track with discrete coils, separately energized by capacitors. An actual driver would use multiple-coil buckets and an oscillatory multi-phase drive system. Even the basic, table-top demonstration system should in principle be able to achieve accelerations in the 1,000 m/sq sec range. Current densities of the order of 25 ka/sq cm, continuously achievable only in superconductors, are carried by an ordinary aluminum bucket coil for a short period in order to demonstrate the calculated acceleration. Ultimately the system can be lengthened and provided with a magnetically levitated, superconducting bucket to study levitation dynamics under quasi-steady-state conditions, and to approach lunar escape velocity in an evacuated tube.

Kolm, H. H.↗
NASA NTRS1978

Investigation of the burning configuration of a coaxial injector in a combustion chamber

An analytical investigation was made into the stability of the burning configuration of a single coaxial injector surrounded by similar injectors. The stability criteria was based on an average pressure difference along the boundaries of the adjacent stream tubes as calculated using Spaulding's numerical method. The results indicate qualitatively that there is a tendency for the injectors to have different burning configurations. It is believed that the configuration achieved is random, however once the burning configuration is established, it is believed to persist.

Ohara, J.↗
NASA NTRS1977

Impedance characteristics of coaxial and planar magnetoplasma capacitors

A theory has been developed for the impedance of a homogeneous magnetoplasma enclosed between two specular reflecting coaxial electrodes, with a static magnetic field parallel to the electrode axes. The parallel-plate magnetoplasma capacitor is treated as a sub-case. Starting with the Vlasov equation, an integral equation is derived for the electric field. Solving this equation, and integrating to obtain the voltage, gives the capacitor impedance. This includes a capacitive component, and a resistive component expressing the Landau damping associated with the open orbits of electrons reflected at the electrodes. A direct numerical solution of the field integral equation has been carried out for a range of values of magnetic field, plasma density, and signal frequency. The values of impedance so obtained are compared with the predictions of macroscopic theory, and of an approximate microscopic theory in which open orbits are ignored and solutions are obtained using finite Fourier transform methods. The mathematical relations between these theories are demonstrated.

Harker, K. J.↗
NASA NTRS1979

Effects of geometric and flow-field variables on inverted-velocity-profile coaxial jet noise

Relationships between the noise generation characteristics and the flow field characteristics for inverted-velocity-profile coaxial jets are discussed. Noise measurements were made at four different sideline distances in order to determine the apparent noise source locations, and flow field characteristics were determined from jet plume pressure/temperature surveys. These relationships are based on a published NASA Lewis prediction model, the basic assumptions of which are shown to be consistent with the experimental data reported herein. Improvements to the noise prediction procedure, on the basis of the present study, are included, which increase the accuracy of the high frequency noise prediction.

Stone, J. R.↗
NASA NTRS1976

Review of coaxial flow gas core nuclear rocket fluid mechanics

Almost all of the fluid mechanics research associated with the coaxial flow gas core reactor ended abruptly with the interruption of NASA's space nuclear program because of policy and budgetary considerations in 1973. An overview of program accomplishments is presented through a review of the experiments conducted and the analyses performed. Areas are indicated where additional research is required for a fuller understanding of cavity flow and of the factors which influence cold and hot flow containment. A bibliography is included with graphic material.

Weinstein, H.↗