Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “behavioral sciences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Measurement of Atomic Oxygen in Diffuse Aurora and Ion Density in the E-Region

An ion mass spectrometer (IMS) was refurbished, calibrated and supplied to the University of Colorado payload (Dr. Charles Barth, P.I.) which was launched from White Sands in September of 1993 as NASA 33.062. The nose cone failed to deploy and their were problems with the ACS so the mission was declared a failure. However, the door covering the IMS deployed and the instrument obtained data. The launch occurred shortly after a payload carrying solar x-ray detectors was launched. Thus a small portion of the Colorado payload science was salvaged; namely, the NO(+)/O2(+) ratio to compare with the measured x-ray flux. Figure I shows the NO(+) to O2(+) ratio vs. altitude. The behavior is typical of the E-region.

Sharp, William E.↗
NASA NTRS2014

Ames Life Science Data Archive: Translational Rodent Research at Ames

The Life Science Data Archive (LSDA) office at Ames is responsible for collecting, curating, distributing and maintaining information pertaining to animal and plant experiments conducted in low earth orbit aboard various space vehicles from 1965 to present. The LSDA will soon be archiving data and tissues samples collected on the next generation of commercial vehicles; e.g., SpaceX & Cygnus Commercial Cargo Craft. To date over 375 rodent flight experiments with translational application have been archived by the Ames LSDA office. This knowledge base of fundamental research can be used to understand mechanisms that affect higher organisms in microgravity and help define additional research whose results could lead the way to closing gaps identified by the Human Research Program (HRP). This poster will highlight Ames contribution to the existing knowledge base and how the LSDA can be a resource to help answer the questions surrounding human health in long duration space exploration. In addition, it will illustrate how this body of knowledge was utilized to further our understanding of how space flight affects the human system and the ability to develop countermeasures that negate the deleterious effects of space flight. The Ames Life Sciences Data Archive (ALSDA) includes current descriptions of over 700 experiments conducted aboard the Shuttle, International Space Station (ISS), NASA/MIR, Bion/Cosmos, Gemini, Biosatellites, Apollo, Skylab, Russian Foton, and ground bed rest studies. Research areas cover Behavior and Performance, Bone and Calcium Physiology, Cardiovascular Physiology, Cell and Molecular Biology, Chronobiology, Developmental Biology, Endocrinology, Environmental Monitoring, Gastrointestinal Physiology, Hematology, Immunology, Life Support System, Metabolism and Nutrition, Microbiology, Muscle Physiology, Neurophysiology, Pharmacology, Plant Biology, Pulmonary Physiology, Radiation Biology, Renal, Fluid and Electrolyte Physiology, and Toxicology. These experiment descriptions and data can be accessed online via the public LSDA website (http://lsda.jsc.nasa.gov) and information can be requested via the Data Request form at http://lsda.jsc.nasa.gov/common/dataRequest/dataRequest.aspx or by contacting the ALSDA Office at: Alison.J.French@nasa.gov

Life Sciences↗
NASA NTRS1990

Low-gravity materials experiments in the Space Station Freedom

The science and hardware programs laying the science and technology framework for experiments to be conducted aboard SSF are described. Six microgravity facilities planned for the Laboratory Module encompass the Fluid Physics/Dynamics Facility, investigating fundamental fluid behavior; the Advanced Protein Crystal Growth Facility, growing high-quality crystals for pharmaceutical, medical, chemical, and biotechnology applications; the Biotechnology Facility, investigating microgravity effects on biological processes and living organisms at the cellular level and on the purification and production of biological materials; the Space Station Furnace Facility, conducting metal and alloy solidification experiments; the Modular Containerless Processing Facility, supporting experiments through levitation techniques; and the Modular Combustion Facility, performing studies of fundumental combustion processes.

Chassay, Roger P.↗
NASA NTRS2002

The Pascal Mars Scout Mission

Except for Earth, Mars is the planet most amenable to surface-based climate studies. Its surface is accessible, and the kind of observations that are needed, such as meteorological measurements from a long-lived global network, are readily achievable. Weather controls the movement of dust, the exchange of water between the surface and atmosphere, and the cycling of CO2 between the poles. We know there is a weather signal, we know how to measure it, and we know how to interpret it. Pascal seeks to understand the long-term global behavior of near-surface weather systems on Mars, how they interact with its surface, and, therefore, how they control its climate system. To achieve this, Pascal delivers 18 Science Stations to the surface of the planet that operate for three Mars years (5.6 Earth years). The network has stations operating in the tropics, midlatitudes, and polar regions of both hemispheres. During entry, descent, and landing, each Pascal probe acquires deceleration measurements to determine thermal structure, and descent images to characterize local terrain. On the surface, each Science Station takes daily measurements of pressure, opacity, temperature, wind speed, and water vapor concentration and monthly panoramic images of the landing environment. These data will characterize the planet's climate system and how atmosphere-surface interactions control it. The Pascal mission is named after 17th century French Scientist, Blaise Pascal, who pioneered measurements of atmospheric pressure. Pressure is the most critical measurement because it records the "heartbeat" of the planet's general circulation and climate system.

Haberle, R. M.↗
NASA NTRSDate not supplied

Testing of the Veggie Vegetable Production System on the International Space Station

The Veggie vegetable production system has been flying on the International Space Station since 2014, with a second Veggie chamber added in 2017. Veggie is a simple, low power, flexible platform for space plant cultivation. Since 2014, over a dozen crop cycles have been conducted in Veggie. Primarily leafy green crops have been grown, and many of these have been used to supplement the crew diet. Flowers were also grown, and the seeds returned produced viable progeny. In addition to the crop plants, Veggie has been used as a platform for model plants grown in Petri dishes or custom magenta jar chambers. Other used have included algal culture and an education seed germination experiment. Science in Veggie has focused on the plant microbiome, the chemistry and food safety of space-grown produce, the impacts of light quality on crop growth, and the behavioral health benefits of cultivating and eating space crops. Veggie is allowing testing and maturation of NASA’s early-stage space crop production research in a relevant environment, and the lessons that we are learning from this research are helping to shape future exploration scenarios. This research was funded by NASA Space Biology and NASA’s Human Research Program.

Veggie↗
NASA NTRSDate not supplied

Testing of the Veggie Vegetable Production System on the International Space Station

The Veggie vegetable production system has been flying on the International Space Station since 2014, with a second Veggie chamber added in 2017. Veggie is a simple, low power, flexible platform for space plant cultivation. Since 2014, over a dozen crop cycles have been conducted in Veggie. Primarily leafy green crops have been grown, and many of these have been used to supplement the crew diet. Flowers were also grown, and the seeds returned produced viable progeny. In addition to the crop plants, Veggie has been used as a platform for model plants grown in Petri dishes or custom magenta jar chambers. Other used have included algal culture and an education seed germination experiment. Science in Veggie has focused on the plant microbiome, the chemistry and food safety of space-grown produce, the impacts of light quality on crop growth, and the behavioral health benefits of cultivating and eating space crops. Veggie is allowing testing and maturation of NASA’s early-stage space crop production research in a relevant environment, and the lessons that we are learning from this research are helping to shape future exploration scenarios. This research was funded by NASA Space Biology and NASA’s Human Research Program.

Veggie↗
NASA NTRS2019

Testbed Requirements to Enable New Observing Strategies

Emerging capabilities to integrate instruments on smallsats, airborne platforms and in situ devices into an intelligent, distributed observing strategy show great promise for measuring Earth science natural phenomena and physical processes that have not previously been characterized. To reduce the threshold for success in deploying such an intelligent, integrated observing strategy, a ground-based testbed system is proposed. Virtually all of the technologies needed for using such a tool have matured to the point of being used, individually. Virtually none of the technologies have been deployed, working together. The technologies to be deployed should be integrated into a working "breadboard" where the components can be debugged and performance and behavior characterized and tuned-up. A system of this complexity should not be expected to work without full integration and experimental characterization. Further, and perhaps more importantly, in order to successfully propose a space-based element to this strategy, teams must convince the relevant science community that the risk is low enough to warrant the investment. The main benefit of the testbed is to retire the risk of integrating these new technologies and increase the Technology Readiness Level (TRL) of each component as well as the System Readiness Level (SRL) of the integrated system.

Little, Mike↗
NASA NTRS2007

Space Exploration: Challenges in Medicine, Research, and Ethics

This viewgraph presentation describes the challenges that space exploration faces in terms of medicine, research and ethics. The topics include: 1) Effects of Microgravity on Human Physiology; 2) Radiation; 3) Bone; 4) Behavior and Performance; 5) Muscle; 6) Cardiovascular; 7) Neurovestibular; 8) Food and Nutrition; 9) Immunology and Hematology; 10) Environment; 11) Exploration; 12) Building Block Approach; 13) Exploration Issues; 14) Life Sciences Contributions; 15) Health Care; and 17) Habitability.

Davis, Jeffrey R.↗
NASA NTRS2018

An Early Assessment of JPSS-1/NOAA-20 VIIRS Day-Night Band On-Orbit Calibration and Performance

The JPSS-1 (now named NOAA-20) VIIRS instrument has been successfully operating on orbit since November 28th, 2017. The Day-Night Band (DNB) is a panchromatic channel covering wavelengths from 0.5 to 0.9 m that is capable of observing the Earth scene in visible/near-Infrared spectral range at spatial resolution of 750 m. The DNB operates at low, mid, or high radiometric gain stages, and it uses an onboard solar diffuser (SD) panel for low gain stage calibration. The SD observations also provide a mean to compute gain ratios between low-to-mid and mid-to-high gain stages. With their large dynamic range and high sensitivity, the DNB detectors can make observations during both daytime and nighttime. This paper provides an early assessment of the DNB on-orbit performance and behavior in the first 90-day post launch test (PLT) period and beyond. The calibration methodology used by the VIIRS Characterization Support Team (VCST) in support of the NASA earth science community will be presented. The trending of OBC dark-offsets, SD gains and gain ratios, and signal-to-noise ratio (SNR) at minimum radiance have been analyzed, especially during key events such as the Nadir and Cryo-cooler doors opening. Furthermore, we performed inter-comparison studies between SNPP and JPSS-1 instruments and evaluated DNB radiometric calibration and characterization, including the SD degradation, detector gains and gain ratios, as well as the calibration comparison between the IDPS LUTs and our VCST delivery results.

Chen, H.↗
NASA NTRS1971

Reference earth orbital research and applications investigations (blue book). Volume 6: Materials sciences and manufacturing

The development of commercial manufacturing and research activities in space is discussed. The capability is to be installed in space stations in order to exploit the extended free fall which makes many novel manipulations of materials possible and alters the behavior of certain chemical and physical processes. The broad objectives are: (1) to develop technical basis required for commercial use of manned space facilities, (2) to provide indirect economic benefits by exploiting advantages of space laboratory facilities to solve critical experimental problems, and (3) to initiate manufacturing operations in space by private enterprise for commercial purposes and by agencies of the Government for public purposes.

Source record↗
NASA NTRSDate not supplied

NASA Earth Science Division’s Commitment to Increasing Safety in the Field

NASA's Earth Science Division (ESD) has led and supported field campaign research over many decades focused on advancing fundamental research, testing new instrument technologies, and promoting career development. ESD field campaign research is conducted over a wide range of projects that vary in size, science focus area, location, platform type, and people. ESD leadership has created a task team to address campaign physical and mental safety, with the goal of providing all participants in NASA field campaign research with an environment that promotes research, safety, inclusivity, and a positive experience. Building on resources that have been developed both within and outside NASA, we report on the task team’s accomplishments and near-term plans, including the recent establishment of a best practices document and guidelines for the development of “agreement of behaviors” document for field teams. We also describe progress in the development of an online training module for field campaign participation, the incorporation of campaign safety language in forthcoming NASA ROSES solicitations, and outreach activities. Finally, we report on recent joint interactions with the NASA Planetary Science Division’s Ethics in Fieldwork team.

Ocean-based measurements↗
NASA NTRS1977

UTSI atmospheric science program

Two areas of research were carried out concerned with meteorological and environmental inputs to aviation systems. One effort dealt with the investigation of wind fields about bluff geometries typical of buildings or other man made obstructions to the surface wind and the behavior of craft flying through these disturbed wind fields. The second effort was the definition and mathematical models of atmospheric wind shear associated with thunderstorms, stable boundary layers, and synoptic fronts. These mathematical models can be utilized in flight simulators to train pilots and flight crews and to develop instrumentation for landing in adverse wind shear conditions.

Frost, W.↗
NASA NTRS1985

Studies of Model Immiscible Systems

The objectives are to use model transparent monotectics to obtain fundamental information applicable to two-phase systems in general, to apply this understanding to materials of interest in the Microgravity Science and Applications program, and to interpret results of flight experimental involving monotectic alloys. A number of model immiscible systems are in use to study various aspects of two-phase behavior within the miscibility gap and during solidification. Particle growth, coalescence and particle motions are under investigation using a holographic microscopy system. The system is capable of working with particle densities up to 10 to the 7th power particles/cubic centimeters through a 100 micron depth and can resolve particles of the order of 2 to 3 micron in diameter throughout the entire cell volume. Particle size, distribution changes with respect to time and temperature are observable from sequential holograms. Initial experiments using diethylene glycol/ethyl salicylate (DEG/ES) have demonstrated the usefulness of the technique. The thermal system controls temperature to at least plus or minus 0.001 K over the course of an experiment. A time-lapse film, made from holograms, of a succinonitrile/water solution shows particle size and number distribution changes with time under isothermal conditions. The observations are consistent with Ostwald ripening theory.

Frazier, D. O.↗
NASA NTRS2003

Aeroheating Thermal Model Correlation for Mars Global Surveyor (MGS) Solar Array

The Mars Global Surveyor (MGS) Spacecraft made use of aerobraking to gradually reduce its orbit period from a highly elliptical insertion orbit to its final science orbit. Aerobraking produces a high heat load on the solar arrays, which have a large surface area exposed to the airflow and relatively low mass. To accurately model the complex behavior during aerobraking, the thermal analysis needed to be tightly coupled to the spatially varying, time dependent aerodynamic heating. Also, the thermal model itself needed to accurately capture the behavior of the solar array and its response to changing heat load conditions. The correlation of the thermal model to flight data allowed a validation of the modeling process, as well as information on what processes dominate the thermal behavior. Correlation in this case primarily involved detailing the thermal sensor nodes, using as-built mass to modify material property estimates, refining solar cell assembly properties, and adding detail to radiation and heat flux boundary conditions. This paper describes the methods used to develop finite element thermal models of the MGS solar array and the correlation of the thermal model to flight data from the spacecraft drag passes. Correlation was made to data from four flight thermal sensors over three of the early drag passes. Good correlation of the model was achieved, with a maximum difference between the predicted model maximum and the observed flight maximum temperature of less than 5%. Lessons learned in the correlation of this model assisted in validating a similar model and method used for the Mars Odyssey solar array aeroheating analysis, which were used during onorbit operations.

Amundsen, Ruth M.↗
NASA NTRS2010

Data-Flow Based Model Analysis

The concept of (meta) modeling combines an intuitive way of formalizing the structure of an application domain with a high expressiveness that makes it suitable for a wide variety of use cases and has therefore become an integral part of many areas in computer science. While the definition of modeling languages through the use of meta models, e.g. in Unified Modeling Language (UML), is a well-understood process, their validation and the extraction of behavioral information is still a challenge. In this paper we present a novel approach for dynamic model analysis along with several fields of application. Examining the propagation of information along the edges and nodes of the model graph allows to extend and simplify the definition of semantic constraints in comparison to the capabilities offered by e.g. the Object Constraint Language. Performing a flow-based analysis also enables the simulation of dynamic behavior, thus providing an "abstract interpretation"-like analysis method for the modeling domain.

Saad, Christian↗
NASA NTRS2012

Overview of NASA's Microgravity Materials Research Program

The NASA microgravity materials program is dedicated to conducting microgravity experiments and related modeling efforts that will help us understand the processes associated with the formation of materials. This knowledge will help improve ground based industrial production of such materials. The currently funded investigations include research on the distribution of dopants and formation of defects in semiconductors, transitions between columnar and dendritic grain morphology, coarsening of phase boundaries, competition between thermally and kinetically favored phases, and the formation of glassy vs. crystalline material. NASA microgravity materials science investigators are selected for funding either through a proposal in response to a NASA Research Announcement or by participation in a team proposing to a foreign agency research announcement. In the latter case, a US investigator participating in a successful proposal to a foreign agency can then apply to NASA for funding of an unsolicited proposal. The program relies on cooperation with other aerospace partners from around the world. The ISS facilities used for these investigations are provided primarily by partnering with foreign agencies and in most cases the US investigators are working as a part of a larger team studying a specific area of materials science. The following facilities are to be utilized for the initial investigations. The ESA provided Low Gradient Facility and the Solidification and Quench Inserts to the Materials Research Rack/Materials Science Laboratory are to be used primarily for creating bulk samples that are directionally solidified or quenched from a high temperature melt. The CNES provided DECLIC facility is used to observe morphological development in transparent materials. The ESA provided Electro-Magnetic Levitator (EML) is designed to levitate, melt and then cool samples in order to study nucleation behavior. The facility provides conditions in which nucleation of the solid is not triggered from the wall and in which fluid flows in the sample can be controlled and manipulated. These conditions allow scientists ideal conditions for understanding the relative amounts and distribution of different phases that form in the solid. Finally, the Coarsening of Solid Liquid Melts hardware allows quenching of low temperature samples in the Microgravity Science Glovebox.

Downey, James Patton↗