Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “average atom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A high-performance Hg(+) trapped ion frequency standard

A high-performance frequency standard based on (199)Hg(+) ions confined in a hybrid radio frequency (RF)/dc linear ion trap is demonstrated. This trap permits storage of large numbers of ions with reduced susceptibility to the second-order Doppler effect caused by the RF confining fields. A 160-mHz-wide atomic resonance line for the 40.5-GHz clock transition is used to steer the output of a 5-mHz crystal oscillator to obtain a stability of 2 x 10(exp -15) for 24,000-second averaging times. Measurements with a 37-mHz line width for the Hg(+) clock transition demonstrate that the inherent stability for this frequency standard is better than 1 x 10(exp -15) at 10,000-second averaging times.

Prestage, J. D.↗

Ultra-stable Hg(+) trapped ion frequency standard

We report the development of a fieldable frequency standard based on Hg-199(+) ions confined in a hybrid r.f./dc linear ion trap. This trap permits storage of large numbers of ions with reduced susceptibility to the second-order Doppler effect caused by the r.f. confining fields. A 160 mHz wide atomic resonance line for the 40.5 GHz clock transition is used to steer the output of a 5 MHz crystal oscillator to obtain a stability of 2 x 10 exp -15 for 24,000 s averaging times. For longer averaging intervals, measurements are limited by instabilities in available hydrogen maser frequency standards. Measurements with 37 mHz linewidth for the Hg(+) clock transition demonstrate that the inherent stability for this frequency standard is at least as good as 1 x 10 exp -15.

Prestage, J. D.↗

Texturing Blood-Glucose-Monitoring Optics Using Oxygen Beams

A method has been invented for utilizing directed, hyperthermal oxygen atoms and ions for texturing tips of polymeric optical fibers or other polymeric optical components for use in optical measurement of concentration of glucose in blood. The required texture of the sensory surface of such a component amounts to a landscape of microscopic hills having high aspect ratios (hills taller than they are wide), with an average distance between hills of no more than about 5 m. This limit on the average distance between hills is chosen so that blood cells (which are wider) cannot enter the valleys between the hills, where they could obstruct optical sensing of glucose in the blood plasma. On the other hand, the plasma is required to enter the valleys, and a high aspect ratio is intended to maximize the hillside and valley surface area in contact with the plasma, thereby making it possible to obtain a given level of optical glucose- measurement sensitivity with a relatively small volume of blood. The present method of texturing by use of directed, hyperthermal (particle energy >1 eV) oxygen atoms and ions stands in contrast to a prior method of texturing by use of thermal monatomic oxygen characterized by a temperature of the order of 0.5 eV. The prior method yields low-aspect- ratio (approximately hemispherical) craters that are tens of microns wide . too wide to exclude blood cells. The figure schematically depicts parts of a typical apparatus for texturing according to the present method. One or more polymeric optical components to be textured (e.g., multiple optical fibers bundled together for simultaneous processing) are mounted in a vacuum chamber facing a suitable ion- or atom-accelerating device capable of generating a beam of oxygen atoms and/or ions having kinetic energies >1 eV. Typically, such a device includes a heated cathode, in which case it is desirable to interpose a water-cooled thermal-radiation shield to prevent melting of the polymeric component(s) to be textured. In operation, the chamber is evacuated to a pressure .10.5 torr (less than or equal to approximately 1.3 mPa), then the beam is turned on. The resulting texture is characterized by approximately conical hills having aspect ratios greater than 1. In experiments, it was demonstrated that separations between adjacent hills can be made .1 m and that the separations and heights of the hills can be varied by varying the fluence of monatomic oxygen and/or oxygen ions.

Banks, Bruce↗

On temperature and speed of He/2+/ and O/6+/ ions in the solar wind

First results on fluid parameters of heavy ions in the solar wind from ISEE-1 mass spectrometer data are presented. Temperatures and speeds of the He(2+) and O(6+) ions have been determined for about 150 hours of data in late 1977. It is found that the temperatures are roughly proportional to atomic mass of the ion species. When temperatures are comparatively low, this proportionality does not hold for H(+). At high speeds and high temperatures the minor ions stream somewhat faster than H(+), but there is on average practically no difference between speeds of He(2+) and O(6+).

Schmidt, W. K. H.↗

QSO X-ray spectra and the contribution of QSOs to the X-ray background radiation

It has been suggested that QSOs make up a substantial fraction of the unresolved X-ray background (XRB) in the 0.5-3 keV energy band. The XRB is poorly known at these energies due to contamination by diffuse galactic emission. The XRB spectrum is precisely measured above 3 keV, and the aggregate spectrum of the proposed contributors should match its form. Seyfert galaxies are thought to contribute 20-30 percent (3-10 keV), and they have been shown to have power-law energy indices of roughly 0.7. The 1-15 keV average spectrum of a sample of optically bright QSOs and a 90 percent confidence range is found for a power law index of 0.83 for N(H) of less than 3 x 10 to the 20th atoms per sq cm. It is also found that QSOs with spectra most consistent with these measurements can contribute about 30 percent at most of the 3-10 keV XRB, or else the remaining contributors have intriguing spectra which rise with energy up to 10 keV and fall sharply thereafter. Alternativey, the X-ray spectral shape of QSOs is a function of redshift and/or radio luminosity.

Worrall, D. M.↗

Collisional excitation of interstellar molecules - Deuterated water, HDO

Using an accurate theoretical interacting potential and coupled-channel molecular scattering calculations, excitation rates for deuterated water (HDO) in collisions with He atoms were computed. Data are presented for rates among the 34 rotational levels with energy below 400/cm for temperatures between 50 and 500 K. Excitation rate constants were determined using data from fixed energy cross sections averaged over thermal (Boltzmann) distributions of collision energies. Based on the agreement (for H2O) of rates from two different theoretical potentials and on agreement with the limited experimental data, the larger rates for HDO were estimated to be generally accurate to better than 50 percent.

Green, Sheldon↗

Measured space environmental effects to LDEF during retrieval

Data gathered by the Interim Operational Contamination Monitor (IOCM) with regard to the effect of the space environment on the STS-32 Shuttle mission and on the Long Duration Exposure Facility (LDEF) are reported. IOCM measures the deposition of molecular and particulate contamination during all flight phases. It also measures the thermophysical properties of thermal control surfaces by calorimetry, the flux of the ambient atomic oxygen environment, the incident solar flux, and the absolute ambient pressure in the payload bay. The IOCM also provides a structure and sample holders for the exposure of passive material samples to the space environment. One of the more salient results from the STS-32 flight suggests that the LDEF emitted a large number of particulates after berthing into the Shuttle. The mission atomic oxygen fluence was also calculated. Although the fluence was low by normal standards, the Kapton (trademark) passive samples exhibited the onset of erosion. Orbital debris and micrometeoroid impacts also occurred during the retrieval mission. The average perforation diameter was approximately 1.25 micrometers. The largest perforation diameter was measured at 65 micrometers.

Maag, Carl R.↗

Junction-to-Case Thermal Resistance of a Silicon Carbide Bipolar Junction Transistor Measured

Junction temperature of a prototype SiC-based bipolar junction transistor (BJT) was estimated by using the base-emitter voltage (V(sub BE)) characteristic for thermometry. The V(sub BE) was measured as a function of the base current (I(sub B)) at selected temperatures (T), all at a fixed collector current (I(sub C)) and under very low duty cycle pulse conditions. Under such conditions, the average temperature of the chip was taken to be the same as that of the temperature-controlled case. At increased duty cycle such as to substantially heat the chip, but same I(sub C) pulse height, the chip temperature was identified by matching the V(sub BE) to the thermometry curves. From the measured average power, the chip-to-case thermal resistance could be estimated, giving a reasonable value. A tentative explanation for an observed bunching with increasing temperature of the calibration curves may relate to an increasing dopant atom ionization. A first-cut analysis, however, does not support this.

Niedra, Janis M.↗

Relating FTS Catalyst Properties to Performance

During the reporting period June 23, 2011 to August 31, 2013, CAER researchers carried out research in two areas of fundamental importance to the topic of cobalt-based Fischer-Tropsch Synthesis (FTS): promoters and stability. The first area was research into possible substitute promoters that might be used to replace the expensive promoters (e.g., Pt, Re, and Ru) that are commonly used. To that end, three separate investigations were carried out. Due to the strong support interaction of γ-Al2O3 with cobalt, metal promoters are commonly added to commercial FTS catalysts to facilitate the reduction of cobalt oxides and thereby boost active surface cobalt metal sites. To date, the metal promoters examined have been those up to and including Group 11. Because two Group 11 promoters (i.e., Ag and Au) were identified to exhibit positive impacts on conversion, selectivity, or both, research was undertaken to explore metals in Groups 12 - 14. The three metals selected for this purpose were Cd, In, and Sn. At a higher loading of 25%Co on alumina, 1% addition of Cd, In, or Sn was found to-on average-facilitate reduction by promoting a heterogeneous distribution of cobalt consisting of larger lesser interacting cobalt clusters and smaller strongly interacting cobalt species. The lesser interacting species were identified in TPR profiles, where a sharp low temperature peak occurred for the reduction of larger, weakly interacting, CoO species. In XANES, the Cd, In, and Sn promoters were found to exist as oxides, whereas typical promoters (e.g., Re, Ru, Pt) were previously determined to exist in an metallic state in atomic coordination with cobalt. The larger cobalt clusters significantly decreased the active site density relative to the unpromoted 25%Co/Al2O3 catalyst. Decreasing the cobalt loading to 15%Co eliminated the large non-interacting species. The TPR peak for reduction of strongly interacting CoO in the Cd promoted catalyst occurred at a measurably lower temperature than in the unpromoted catalyst. Nevertheless, the Co clusters remained slightly larger, on average, in comparison with the unpromoted 15%Co/Al2O3 reference catalyst. None of the promoted catalysts (i.e., with Cd, In, or Sn) exhibited surface Co0 site densities higher than that of the unpromoted catalyst. In activity testing, the activities were even much lower than what was expected from the H2-TPD results. Two possible explanations were proposed: (1) the promoters may be located on the surfaces of cobalt particles, blocking surface Co0 but being able to desorb hydrogen or (2) the promoters may facilitate Co oxidation during FTS, as previously observed by Huffman and coworkers when K was added to cobalt catalysts.

Zirconia↗

Chlorine oxide in the stratospheric ozone layer Ground-based detection and measurement

Stratospheric chlorine oxide, a significant intermediate product in the catalytic destruction of ozone by atomic chlorine, has been detected and measured by a ground-based 204 GHz, millimeter-wave receiver. Data taken at latitude 42 deg N on 17 days between January 10 and February 18, 1980 yield an average chlorine oxide column density of approximately 1.05 x 10 to the 14th/sq cm or approximately 2/3 that of the average of eight in situ balloon flight measurements (excluding the anomalously high data of July 14, 1977) made over the past four years at 32 deg N. Less chlorine oxide below 35 km and a larger vertical gradient than predicted by theoretical models of the stratospheric ozone layer are found.

Parrish, A.↗

The molecular content of the nearby galaxy from IRAS and HI observations

Because infrared emission is a very good tracer of mass at high latitudes, by combining it with HI observations it provides a convenient though indirect way of observing the spatial distribution of molecular material. Moreover, these observations will premit placing limits on the fraction of total infrared luminosity emitted by dust associated with molecular and atomic hydrogen clouds. A preliminary result from the study of the correlation between HI column density and 100 micron infrared flux density as measured by the IRAS satellite is reported. The ratio F100/W(HI) = R has an average value of roughty 17 KJy/sr/(K km/s) over the whole sky. Bright regions in the FIR such as the Galactic plane and HII regions are excluded from the data. The histogram of the number of pixels vs R has a strong peak near 17 (same units as before) and is asymmetric about this mean value, having a tail at higher values of R. This basic shape is fairly independent of the region of the sky we observe. The peak confirms the general correlation between infrared emission and HI column density reported previously. One way to explain the shape of the distribution is to assume a constant dust to gas mass ratio and a constant interstellar radiation field and associate points in the tail with molecular clouds. In this case the ratio R is higher for points in the tail because it does not account for the column density of molecular hydrogen.

Bazell, D.↗

Atomic oxygen modeling in the upper thermosphere

Empirical models of atomic oxygen in the earth's thermosphere are discussed, and calibration problems in satellite drag and in situ mass spectrometer measurements are reviewed. Models based on drag data and mass spectrometer data are found to agree on average to within 15 percent, suggesting that the absolute values are reasonably well known in the upper thermosphere. Comparison of different models with various data sources show residuals of at least 15 percent which are the results of unmodeled magnetic storm, EUV, and geographical variations and smaller scale variations caused by gravity waves.

Hedin, A. E.↗

Extreme ultraviolet spectrum of a solar active region from SERTS

We present wavelengths and absolute intensities for 243 emission lines from a single active region observed by the Solar Extreme Ultraviolet (EUV) Rocket Telescope and Spectrograph (SERTS) on 1989 May 5. For this catalog, the imaged spectra have been spatially averaged over a field of view 7 sec x 276 sec cutting through the center of AR5464 at S18 W45. Wavelength coverage is 170-450 A with a spectral resolution approaching 10,000. Most of the line positions are determined to 5 mA or better, representing the highest accuracy yet obtained for solar wavelengths throughout this spectral interval. The relative photometric calibration of the instrument is good to +/- 20% over its first-order range, and has been placed onto an absolute scale that should be correct to within a factor less than 2. Where known, identifications, atomic transitions and formation temperatures are also given. The identified lines arise from temperatures that cover the range log T greater than or equal to 4.7 and less than or equal to 6.8, providing information about the Sun's corona and upper transition region. Upper limits to the intensity of any emission line not included here can be estimated from the measured instrumental sensitivity. This averaged EUV spectrum should prove useful as a source of accurate wavelengths and intensities for emission characteristic of the high-temperature plasma associated with a solar active region and small subflare.

Thomas, Roger J.↗

4.46 Ga Zircons Anchor Chronology of Lunar Magma Ocean

The crystallisation ages of lunar samples provide critical constraints on the minimum formation age of the Moon and its early evolution. Zircon crystals from Apollo 17 lunar impact melt breccia 72255 preserve ancient domains with a concordant average uranium-lead radiometric date of 4460 ± 31 Ma (Zhang et al., 2021), the oldest lunar zircon yet reported. To assess the possible mobility of radiogenic lead in zircon, which may lead to redistribution and clustering of Pb atoms that may cause a U-Pb age bias (Valley et al., 2014), we investigated a zircon grain from Zhang et al. (2021) by atom probe tomography (APT). The atomic spatial resolution analysis of individual mineral grains demonstrates the absence of nanoscale clustering of lead, which supports a 4.46 Ga ancient formation age for lunar zircon in sample 72255. This age pushes back the age of the first preserved lunar crust by ∼40 Myr and provides a minimum formation age for the Moon within 110 Myr after the formation of the solar system.

atom probe tomography↗

Calculation of the total electron excitation cross section in the Born approximation using Slater wave functions for the Li (2s yields 2p), Li (2s yields 3p), Na (3s yields 4p), Mg (3p yields 4s), Ca (4s yields 4p) and K (4s yields 4p) excitations

Excitation of neutral atoms by inelastic scattering of incident electrons in gaseous nebulae were investigated using Slater Wave functions to describe the initial and final states of the atom. Total cross sections using the Born Approximation are calculated for: Li(2s yields 2p), Na(3s yields 4p), k(4s yields 4p). The intensity of emitted radiation from gaseous nebulae is also calculated, and Maxwell distribution is employed to average the kinetic energy of electrons.

Simsic, P. L.↗

Multiplet effects on the L(2,3) fluorescence yield of multiply ionized Ar

The 2p fluorescence yield of argon in the presence of 0 to 6 3p holes was calculated by statistically averaging the fluorescence yields of initial state that consist of individual multiplet configurations. These configurations were formed by coupling the 2p vacancy to the partially filled 3p shell. Results agree reasonably well with experimental fluorescence yields deduced from ion-atom collision measurements.

Chen, M. H.↗

The ultraviolet properties of dust in the Orion Nebula

The continuum in the Orion Nebula was observed with the IUE at 16 positions varying from 30 arcsec to 5 arcmin in angular separation from the central star Theta(1) Orionis C. The atomic continuum was estimated from the H-beta brightnesses. The remaining scattered starlight was analyzed by multiple-scattering models in which the main parameters are: (1) the albedo of the dust; (2) the scattering phase function parameter, the averaged cosine of the angle of scattering; and (3) the density of dust grains at small distances from the star. It is found that (a) dust must be depleted near the star; (b) the albedo is fairly well determined and is constant across the 2200 A extinction feature; and (c) grains are quite forward-throwing at 1300 A, as they have been found at 4600 A earlier. The scattering is more isotropic at 2400 A. However, the absolute value of the scattering phase function parameters at all wavelengths is quite uncertain because it depends sensitively upon the density of grains close to the star.

Mathis, J. S.↗

The Venus nitric oxide night airglow - Model calculations based on the Venus Thermospheric General Circulation Model

The mechanism responsible for the Venus nitric oxide (0,1) delta band nightglow observed in the Pioneer Venus Orbiter UV spectrometer (OUVS) images was investigated using the Venus Thermospheric General Circulation Model (Dickinson et al., 1984), modified to include simple odd nitrogen chemistry. Results obtained for the solar maximum conditions indicate that the recently revised dark-disk average NO intensity at 198.0 nm, based on statistically averaged OUVS measurements, can be reproduced with minor modifications in chemical rate coefficients. The results imply a nightside hemispheric downward N flux of (2.5-3) x 10 to the 9th/sq cm sec, corresponding to the dayside net production of N atoms needed for transport.

Bougher, S. W.↗