Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “absorption saturation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

CsPbBr{sub 3} nanocrystal saturable absorber for mode-locking ytterbium fiber laser

Cesium lead halide perovskite nanocrystals (CsPbX{sub 3}, X = Cl, Br, I) have been reported as efficient light-harvesting and light-emitting semiconductor materials, but their nonlinear optical properties have been seldom touched upon. In this paper, we prepare layered CsPbBr{sub 3} nanocrystal films and characterize their physical properties. Broadband linear absorption from ∼0.8 to over 2.2 μm and nonlinear optical absorption at the 1-μm wavelength region are measured. The CsPbBr{sub 3} saturable absorber (SA), manufactured by drop-casting of colloidal CsPbBr{sub 3} liquid solution on a gold mirror, shows modulation depth and saturation intensity of 13.1% and 10.7 MW/cm{sup 2}, respectively. With this SA, mode-locking operation of a polarization-maintained ytterbium fiber laser produces single pulses with duration of ∼216 ps, maximum average output power of 10.5 mW, and the laser spectrum is centered at ∼1076 nm. This work shows that CsPbBr{sub 3} films can be efficient SA candidates for fiber lasers and also have great potential to become broadband linear and nonlinear optical materials for photonics and optoelectronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of cobalt-zinc ferrite (Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}) nanopowder via combustion method and investigation of its magnetic properties

Research highlights: {yields} Cobalt-zinc ferrite was prepared by combustion method. {yields} Properties of the sample were characterized by several techniques. {yields} Curie temperature was determined to be 350 {sup o}C. -- Abstract: Cobalt-zinc ferrite (Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}) was prepared by combustion method, using cobalt, zinc and iron nitrates. The crystallinity of the as-burnt powder was developed by annealing at 700 {sup o}C. Crystalline phase was investigated by XRD. Using Williamson-Hall method, the average crystallite sizes for nanoparticles were determined to be about 27 nm before and 37 nm after annealing, and residual stresses for annealed particles were omitted. The morphology of the annealed sample was investigated by TEM and the mean particle size was determined to be about 30 nm. The final stoichiometry of the sample after annealing showed good agreement with the initial stoichiometry using atomic absorption spectrometry. Magnetic properties of the annealed sample such as saturation magnetization, remanence magnetization, and coercivity measured at room temperature were 70 emu/g, 14 emu/g, and 270 Oe, respectively. The Curie temperature of the sample was determined to be 350 {sup o}C using AC-susceptibility technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation of bound states of pulses in a soliton laser with complex relaxation of a saturable absorber

A numerical model of a soliton fibre laser with a semiconductor saturable absorber mirror (SESAM), characterised by the complex dynamics of absorption relaxation, is considered. It is shown that stationary bound states of pulses can be formed in this laser as a result of their interaction via the dispersion-wave field. The stability of stationary bound states of several pulses is analysed. It is shown that an increase in the number of pulses in a stationary bound state leads eventually to its decay and formation of a random bunch. It is found that the bunch stability is caused by the manifestation of nonlinear self-phase modulation, which attracts pulses to the bunch centre. The simulation results are in qualitative agreement with experimental data. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nitric oxide, water vapor, and ozone in the atmosphere as measured in SITU from an aircraft

As part of the instrument evaluation plan for the NASA Global Atmospheric Sampling Program, prototype instruments were tested aboard the NASA Convair 990 during four flights in January and February of 1974. All the data were taken in maritime air between Hawaii and San Francisco and between Hawaii and 155 deg W, 35 deg N. A chemiluminescent instrument was used to measure nitric oxide. Water vapor, which was measured by using an aluminum oxide hygrometer, ranged from 5.2 micro g/g to saturation. Ozone was measured by an instrument using the ultraviolet absorption technique and ranged up to 235 ppbv. Typical temporal plots of the concentrations of the three constituents are presented. All the constituents showed considerable spatial and day-to-day variation in concentration at each altitude flown. Measurements of the three constituents were made simultaneously at various altitudes between 7.6 and 12.5 km.

Briehl, D.↗

Synthesis of line profiles from models of structured winds

On the basis of a careful analysis of resonance line formation (both for singlets and doublets) in structured winds, present time dependent models of the line driven winds of hot stars are shown to be able to explain a number of observational features with respect to variability and structure: they are (in principle) able to reproduce the black and broad troughs (without any artificial 'turbulence velocity') and the 'blue edge variability' observed in saturate resonance lines: they might explain the 'long lived narrow absorption components' often observed in unsaturated lines at high velocities; they predict a relation between the 'edge velocity' of UV-lines and the radiation temperature of the observed X-ray emission. As a first example of the extent to which theoretical models can be constrained by comparisons between observations and profiles calculated by spectrum synthesis from structured winds, we show here that models with deep-seated onset of structure formation (approximately greater than 1.1 R(sub *)) produce resonance lines which agree qualitatively with observational findings; in contrast, the here presented models with structure formation only well out in the wind (approximately greater than 1.6 R(sub *) fail in this respect.

Puls, J.↗

Thermally induced nonlinear optical absorption in metamaterial perfect absorbers

A metamaterial perfect absorber consisting of a tri-layer (Al/ZnS/Al) metal-dielectric-metal system with top aluminium nano-disks was fabricated by laser-interference lithography and lift-off processing. The metamaterial absorber had peak resonant absorbance at 1090 nm and showed nonlinear absorption for 600ps laser pulses at 1064 nm wavelength. A nonlinear saturation of reflectance was measured to be dependent on the average laser power incident and not the peak laser intensity. The nonlinear behaviour is shown to arise from the heating due to the absorbed radiation and photo-thermal changes in the dielectric properties of aluminium. The metamaterial absorber is seen to be damage resistant at large laser intensities of 25 MW/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron star masses and radii from quiescent low-mass x-ray binaries

We perform a systematic analysis of neutron star radius constraints from five quiescent low-mass X-ray binaries and examine how they depend on measurements of their distances and amounts of intervening absorbing material, as well as their assumed atmospheric compositions. We construct and calibrate to published results a semi-analytic model of the neutron star atmosphere which approximates these effects for the predicted masses and radii. Starting from mass and radius probability distributions established from hydrogen-atmosphere spectral fits of quiescent sources, we apply this model to compute alternate sets of probability distributions. We perform Bayesian analyses to estimate neutron star mass-radius curves and equation of state (EOS) parameters that best-fit each set of distributions, assuming the existence of a known low-density neutron star crustal EOS, a simple model for the high-density EOS, causality, and the observation that the neutron star maximum mass exceeds 2 M {sub ☉}. We compute the posterior probabilities for each set of distance measurements and assumptions about absorption and composition. We find that, within the context of our assumptions and our parameterized EOS models, some absorption models are disfavored. We find that neutron stars composed of hadrons are favored relative to those with exotic matter with strong phase transitions. In addition, models in which all five stars have hydrogen atmospheres are found to be weakly disfavored. Our most likely models predict neutron star radii that are consistent with current experimental results concerning the nature of the nucleon-nucleon interaction near the nuclear saturation density.

79 ASTRONOMY AND ASTROPHYSICS↗

Fermi level stabilization energy in cadmium oxide

We have studied the effects of high concentrations of native point defects on the electrical and optical properties of CdO. The defects were introduced by irradiation with high energy He+, Ne+, Ar+ and C+ ions. Increasing the irradiation damage with particles heavier than He+ increases the electron concentration until a saturation level of 5x1020 cm-3 is reached. In contrast, due to the ionic character and hence strong dynamic annealing of CdO, irradiation with much lighter He+ stabilizes the electron concentration at a much lower level of 1.7x1020 cm-3. A large shift of the optical absorption edge with increasing electron concentration in irradiated samples is explained by the Burstein-Moss shift corrected for electron-electron and electron-ion interactions. The saturation of the electron concentration and the optical absorption edge energy are consistent with a defect induced stabilization of the Fermi energy at 1 eV above the conduction band edge. The result is in a good agreement with previously determined Fermi level pinning energies on CdO surfaces. The results indicate that CdO shares many similarities with InN, as both materials exhibit extremely large electron affinities and an unprecedented propensity for n-type conductivity.

36 MATERIALS SCIENCE↗

Photoluminescence of Diamondoid Crystals

The photoluminescence of diamondoids in the solid state is examined. All of the diamondoids are found to photoluminesce readily with initial excitation wavelengths ranging from 233 nm to 240 nm (5.3 eV). These excitation energies are more than 1 eV lower than any previously studied saturated hydrocarbon material. The emission is found to be heavily shifted from the absorption, with emission wavelengths of roughly 295 nm (4.2 eV) in all cases. In the dissolved state, however, no uorescence is observed for excitation wavelengths as short as 200 nm. We also discuss predictions and measurements of the quantum yield. Our predictions indicate that the maximum yield may be as high as 25%. Our measurement of one species, diamantane, gives a yield of 11%, the highest ever reported for a saturated hydrocarbon, even though it was likely not at the optimal excitation wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isolating Weakly and Strongly-Absorbing Classes of Carbonaceous Aerosol: Optical Properties, Abundance and Lifecycle

The goal of this project was to evaluate climate-relevant properties of carbonaceous particles and the transformations of those particles in the atmosphere, with the purpose of developing lumped classes of carbonaceous particles suitable for use in large-scale models. These climate-relevant properties included light absorption and hygroscopicity. Hygroscopicity is a measure of water affinity, which governs particle growth at humid conditions and absorption and scattering under those conditions. It also controls particles’ activation into cloud droplets, which in turn affects cloud albedo and particle removal. This project used laboratory measurements of fresh and aged carbonaceous aerosol, and predictions of properties using a particle-resolved model, to identify sensitivities. The focus in this project was on aerosol from biomass pyrolysis, abbreviated BrC (“brown carbon”). We measured absorption by aerosol from biomass pyrolysis from two sources with very different composition: wood and corn stalk. For both sources, the greatest light absorption occurred at the highest generation temperature, and this maximum absorption was very similar to that of wood-generated aerosol. We suggest that pyrolysis products can be considered surrogates for a wide range of biomass aerosol. We captured aerosol emitted from biomass pyrolysis on filters and exposed it to ultraviolet radiation, to the atmospheric trace gases ozone, ammonia (NH 3 ) and nitrogen oxide; and to aqueous saturated salt solutions of ammonium sulfate, ammonium nitrate, sodium chloride and sodium sulfate. Absorption increased, but by only small amounts for all of these treatments, with one exception: after aging with ammonia, absorption increased by almost a factor of four. Absorption increased more at visible wavelengths. We confirmed that a significant change occurred in the aerosol phase, by measuring absorption by suspended particles after aging with NH 3 and finding doubled aerosol absorption. Aging by NH 3 produces a mild increase in the hygroscopicity of BrC, and a greater increase in cloud condensation nucleus activity. Therefore, reactions with NH 3 form compounds that absorb more light than the original aerosol and act as surfactants, increasing the likelihood that these particles will participate in cloud formation. The particle-resolved model PartMC was enhanced to include additional physical processes. It was calibrated against chamber results, and we needed to account for the non-spherical structure of particle agglomerates, even for ammonium sulfate. We implemented the “volatility basis set” (VBS) framework in the model. The updated PartMC-MOSAIC model was able to simulate gas and aerosol concentrations from the CARES campaign at levels similar to observations. The PartMC model was used to evaluate plume dynamics affecting CCN activity of biomass burning aerosols early in a plume. Coagulation limits emission of CCN to about 1016 per kg of fuel. Co-emitted, semi-volatile organic compounds or emission at small particle sizes can homogenize composition before plume exit, and SVOC co-emission can be the main factor determining plume-exit CCN for hydrophobic or small particles. When externally-mixed, accumulation-mode particles are emitted in the absence of SVOCs, CCN can be overestimated by up to a factor of two. This means that measurements made on aerosol from all phases of combustion gathered into a single chamber may incorrectly estimate CCN properties. Based on the findings here, we make some recommendations for use in large-scale models: (1) inventories should represent “internally” versus “externally” mixed under certain combustion conditions; (2) consideration of non-spherical particles when coagulation is important for climate-relevant properties near sources; (3) designating organic biomass particles as weakly absorbing; (4) “inherent absorption” and hygroscopicity are not altered with aging by ozone or ultraviolet light, and inherent absorption is not altered with salt addition, but both cloud activity and absorption are altered by aging with ammonia and could require a separate class in large-scale models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Saturation Phenomena in LIF Measurements, Appendix B

Optical saturation is the phenomenon in which the laser-induced rates of absorption and spontaneous emission between two levels, induced by a laser, become comparable to or greater than the spontaneous emission and collision rates connecting these levels. This results in the excited state population N(u) acquiring a value of similar magnitude to that of the ground state, N(e). Under these conditions the observed fluorescence signal, which is proportional to N(u), is no longer linearly dependent on laser intensity I, but increases at a slower rate, and in principle ultimately becomes independent of I. A conceptual picture of optical saturation using a two-level picture is described. This is, however, inadequate for the description of a real experiment involving a molecule, such as OH, for several reasons, which will be explained briefly; these are the multi-level nature of the electronic states and energy transfer among them and effects due to spatial, spectral, and temporal fluctuations in the laser pulse.

Source record↗

Hydrogen interactions with low-index surface orientations of tungsten

Here we report on density functional theory calculations that have been performed to systematically investigate the hydrogen-surface interaction as a function of surface orientation. The interactions that were analyzed include stable atomic adsorption sites, molecular hydrogen dissociation and absorption energies, migration pathways and barriers on tungsten surfaces, and the saturation coverage limits on the (1 1 1) surface. Stable hydrogen adsorption sites were found for all surfaces. For the reconstructed W(1 0 0), there are two primary adsorption sites: namely, the long-bridge and short-bridge sites. The threefold hollow site (3F) was found to be the most stable for W(1 1 0), while the bond-centered site between the first and second layer was found to be most stable for the W(1 1 1) surface. No bound adsorption sites for H 2 molecules were found for the W surfaces. Hydrogen (H) migration on both the (1 0 0) and (1 1 0) surfaces is found to have preferred pathways for 1D motion, whereas the smallest migration barrier for net migration of H on the W(1 1 1) surface leads to 2D migration. Although weaker H interactions are predicted for the W(1 1 1) surface compared to the (1 0 0) or (1 1 0) surfaces, we observe higher H surface concentrations of Θ = 4.0 at zero K, possibly due to the corrugated surface structure. These results provide insight into H adsorption, surface saturation coverage and migration mechanisms necessary to describe the evolution from the dilute limit to concentrated coverages of H.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of actinide chemistry in saturated potassium fluoride solution

Study concerning the chemistry of actinides in saturated KF solution included work with neptunium, uranium, and americium. Solubilities, absorption spectra, oxidation-reduction reactions, and solid compounds which can be produced in KF solution were examined. The information is used for preparation of various materials from salts of the actinides.

Cohen, D.↗

Hubble Space Telescope UV spectral observations of Io passing into eclipse

Time-resolved spectra of Io have been obtained with the Faint Object Spectrograph on the Hubble Space Telescope in January 1992 at times centered on the passage of Io into Jupiter's shadow. Two different eclipse observations covered 1100-1600 A and 2250-3300 A. In the far ultraviolet(far-UV) range, emission lines of atomic sulfur and oxygen from Io's atmosphere (similar to those previously detected with the International Ultraviolet Explorer (IUE)) have been observed from Io in sunlight, and the spatial extent of the emitting region has been resolved for the first time: this is 0.5-1 Io radii (R(sub Io)) above the surface. The emission lines are typically 1kR in brightness while Io is in sunlight, and decrease to a few hundred Rayleighs within 20 min or less of Io's passing into shadow. If the emissions are produced in Io's ionosphere, the decrease in shadow appears consistent with the collisional slowing and recombination of photoelectrons in 100-1000 s, with recombination an important quenching process if the dominant ion is molecular (i.e., SO2(+)) condensation, with the residual emission in shadow due either to plasma impact of gas above the hot volcanic calderas or electron impact on S and O. In the near-UV range, we have not detected any airglow emissions from Io's atmosphere in shadow, with the main limitation being a high level of scattered light from Jupiter. We derive a 3 sigma upper limit to the 2560 A SO emission feature of 1 KR, which is close to what is expected from electron impact on SO2 based on the obs erved brightness of the FUV S and O lines in shadow. A high signal-to-noise spectrum of Io's albedo in sunlight reveals a spectral shape similar to laboratory spectra of SO2 frost reflectivity, and the relative albedo spectrum changed as Io passed into eclipse and part of the disk was in shadow. No specific SO2 gas absorption features appear in the albedo spectrum, although there could be substantial gas absorption near 2800 A if the individual lines are narrow and saturated. Finally, we present preliminary models for the near-UV spectrum of Io as functions of SO2 frost areal coverage and SO2 gas density.

Clarke, John T.↗

Magnetic and Atomic Structure Parameters of Sc-doped Barium Hexagonal Ferrites

Scandium-doped M-type barium hexagonal ferrites of the composition BaFe12?xScxO19 are well suited for low frequency microwave device applications such as isolators and circulators. A series of Sc-doped M-type barium hexagonal ferrite powders (x = 0-1.2) were prepared by conventional ceramic processing techniques. The resulting powders were verified to be pure phase and maintain the nominal chemical stoichiometry by x-ray diffraction and energy dispersive x-ray spectroscopy, respectively. Static magnetic measurements indicated that both saturation magnetization and uniaxial magnetocrystalline anisotropy field decreased with increasing concentration of scandium. Extended x-ray absorption fine structure measurements were carried out to clarify the correlation between the magnetic and atomic structure properties. It is found that the substituted Sc has a strong preference for the bipyramidal site. Nevertheless, the substitution did not introduce additional atomic structural disorder into the barium hexagonal structure. The structural study provided important evidence to quantitatively explain the change in dc and microwave magnetic properties due to Sc ion doping.

36 MATERIALS SCIENCE↗

Probing the Chemical Stability of Mixed Ferrites: Implications for Magnetic Resonance Contrast Agent Design

Nanomaterials with mixed composition, in particular magnetic spinel ferrites, are emerging as efficient contrast agents for magnetic resonance imaging. Many factors, including size, composition, atomic structure, and surface properties, are crucial in the design of such nanoparticle-based probes because of their influence on the magnetic properties. Silica-coated iron oxide (IO-SiO{sub 2}) and cobalt ferrite (CoIO-SiO{sub 2}) nanoparticles were synthesized using standard high-temperature thermal decomposition and base-catalyzed water-in-oil microemulsion techniques. Under neutral aqueous conditions, it was found that 50-75% of the cobalt content in the CoIO-SiO{sub 2} nanoparticles leached out of the core structure. Leaching caused a 7.2-fold increase in the longitudinal relaxivity and an increase in the saturation magnetization from {approx}48 to {approx}65 emu/g of the core. X-ray absorption fine structure studies confirmed that the atomic structure of the ferrite core was altered following leaching, while transmission electron microscopy and dynamic light scattering confirmed that the morphology and size of the nanoparticle remained unchanged. The CoIO-SiO{sub 2} nanoparticles converted from a partially inverted spinel cation arrangement (unleached state) to an inverse spinel arrangement (leached state). The control IO-SiO{sub 2} nanoparticles remained stable with no change in the structure and negligible changes in the magnetic behavior. This detailed analysis highlights how important understanding the properties of nanomaterials is in the development of reliable agents for diagnostic and therapeutic applications.

36 MATERIALS SCIENCE↗

Parametric Mechanism of Anomalous Microwave Power Absorption in Experiments on Electron Cyclotron Heating in Toroidal Magnetic Traps

The nonlinear stage of the parametric decay instability of an extraordinary wave is analyzed in the presence of a nonmonotonic density profile. The decay excites an electron Bernstein wave, which is localized in the vicinity of a local density maximum, and an ion Bernstein wave, which leaves a nonlinear interaction region and is absorbed by ions in the vicinity of the harmonics of the ion cyclotron frequency. The main mechanism of instability saturation is considered to be a cascade of decays of a primary daughter electron Bernstein wave, which leads to the excitation of localized secondary electron Bernstein waves and ion cyclotron (Bernstein) waves. The localization of electron Bernstein waves causes a significant decrease in the secondary- decay excitation threshold, which is thought to provide saturation of the primary instability at the lowest level. The saturation of the primary parametric decay instability of a pump wave and the anomalous absorption of the pump power are analytically estimated. A numerical simulation is performed using the parameters that are typical of the experiments on the electron cyclotron resonance heating of plasma at the second resonance harmonic in TCV tokamak.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Blood and hair lead in children with different extents of iron deficiency in Karachi

Childhood iron deficiency has a high incidence in Pakistan. Some but not all studies have shown that dietary iron deficiency may cause increased absorption of lead as both compete for the same transporters in the small intestine. Therefore, children in Pakistan, residing in heavily polluted cities like Karachi may be prone to lead poisoning. This hypothesis was tested by investigating blood and hair lead concentrations in children from Karachi who were divided into four groups of iron status; normal, borderline iron deficiency, iron deficiency and iron deficiency anaemia. A prospective observational study was conducted where 269 children were categorized into four groups of iron status using the World Health Organization criteria and one based on soluble transferrin receptor measurements. Blood iron status was determined using a full blood count, serum iron, ferritin, transferrin saturation and soluble transferrin receptor measurements. Blood lead was determined by graphite atomic absorption spectroscopy, whereas hair lead was assessed using an inductively coupled plasma atomic emission spectroscopy technique. Blood lead concentrations were significantly higher in children with iron deficiency anaemia (mean [95% confidence intervals] were 24.9 [22.6-27.2] {mu}g/dL) compared to those with normal iron status (19.1 [16.8-21.4] {mu}g/dL) using WHO criteria. In contrast, hair lead content was not significantly different in children of different iron status. Our findings reinforce the importance of not only reducing environmental lead pollution but also the development of national health strategies to reduce childhood iron deficiency in Pakistan.

60 APPLIED LIFE SCIENCES↗