Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVELENGTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Silicon micromachined waveguides for millimeter and submillimeter wavelengths

The majority of radio receivers, transmitters, and components operating at millimeter and submillimeter wavelengths utilize rectangular waveguides in some form. However, conventional machining techniques for waveguides operating above a few hundred GHz are complicated and costly. This paper reports on the development of silicon micromachining techniques to create silicon-based waveguide circuits which can operate at millimeter and submillimeter wavelengths. As a first step, rectangular WR-10 waveguide structures have been fabricated from (110) silicon wafers using micromachining techniques. The waveguide is split along the broad wall. Each half is formed by first etching a channel completely through a wafer. Potassium hydroxide is used to etch smooth mirror-like vertical walls and LPCVD silicon nitride is used as a masking layer. This wafer is then bonded to another flat wafer using a polyimide bonding technique and diced into the U-shaped half wavelengths. Finally, a gold layer is applied to the waveguide walls. Insertion loss measurements show losses comparable to those of standard metal waveguides. It is suggested that active devices and planar circuits can be integrated with the waveguides, solving the traditional mounting problems. Potential applications in terahertz instrumentation technology are further discussed.

Yap, Markus↗

Determination of refractive properties of fluids for dual-wavelength interferometry

Methods to calculate the refractive properties of solutions at different wavelengths are described by using experimental data at just two wavelengths. The properties are the refractive index and its gradients with temperature and concentration. Cauchy's equation is used to determine the refractive indices. The gradients versus temperature and concentration are then determined by using the Murphy-Alpert and the Lorentz-Lorenz equation, respectively. Finally, the particular case of a triglycine sulfate aqueous solution is considered as an example. The approach should provide the desired information for fringe analysis when dual-wavelength holographic or other interferometry is used for solving heat and mass transfer problems in fluids during crystal-growth experiments.

Vikram, Chandra S.↗

Broad-band linear polarization in cool stars. II - Amplitude and wavelength dependence for magnetic and scattering regions

We have developed a model to estimate the amplitude and wavelength dependence of broad-band linear polarization (BLP) from magnetic regions on cool stars. The model includes corrections both for line blends and for the partial cancellation of polarization in the vector sum over the stellar disk. Our results agree with recent calculations of BLP in the red, but show larger amplitudes and a different wavelength dependence in the blue. We find that the detailed wavelength dependence of the polarization is complex and varies with effective temperature and gravity due to changes in line blanketing. The BLP amplitudes depend strongly on field strength, blanketing, and magnetic region filling factor and geometry. We make rough estimates of the maximum BLP for stars of various spectral types and demonstrate a method for deriving a lower limit to the filling factor from the maximum observed BLP. This lower limit is related to the fractional area covered by the spatially asymmetric component of magnetic regions.

Saar, Steven H.↗

Lithographic spiral antennas at short wavelengths

We have extended the high efficiency of lithographic antennas to mid-infrared wavelengths. Pattern measurements made at 9.5/zm wavelength on a 65 deg, self-complementary, spiral antenna exhibit a ratio of response to orthogonal linear polarizations of 1.35 dB, a beamwidth of 85 deg (3 dB full width), a directivity of 8.2 dB, and surprisingly, a close resemblance to the theoretical pattern for a 65 deg spiral in free space. Direct detection measurements made with an ambient temperature blackbody source yield an antenna efficiency of 52 +/- 7 percent, when corrected for incomplete filling of the antenna beam by the source, at a mean effective wavelength of 19 micron.

Grossman, E. N.↗

A liquid-helium-cooled absolute reference cold load for long-wavelength radiometric calibration

Design, radiometric and thermal performance, and operation of a large diameter (78 cm) liquid-helium-cooled blackbody absolute reference cold load (CL) for the calibration of microwave radiometers is described. CL provides an absolute calibration near the liquid-helium (LHe) boiling point, with total uncertainty in the radiometric temperature of less than 30 mK over the 2.5-23 cm wavelength operating range. CL was used at several wavelengths at the South Pole, Antarctica and the White Mountain Research Center, California. Results show that, for the instruments operated at 20-, 12-, 7.9-, and 4.0 cm wavelength at the South Pole, the total corrections to the LHe boiling-point temperature (about 3.8 K) were 48 +/-23, 18 +/-10, 10 +/-18, and 15 +/-mK.

Bensadoun, Marc↗

Wavelength-Division Multiplexing Of Bipolar Digital Signals

In system, bipolar digital data transmitted by use of wavelength-division multiplexing on single optical fiber. Two different wavelengths used to transmit pulses signifying "positive" or "negative" bipolar digital data. Simultaneous absence of pulses at both wavelengths signifies digital "zero."

Gibbons, Ronnie D.↗

Long-wavelength asymptotics of unstable crossflow modes, including the effect of surface curvature

Stationary vortex instabilities with wavelengths significantly larger than the thickness of the underlying three-dimensional boundary layer are studied with asymptotic methods. The long-wavelength Rayleigh modes are locally neutral and are aligned with the direction of the local inviscid streamline. For a spanwise wave number Beta much less than 1, the spatial growth rate of these vortices is O(Beta(exp 3/2)). When Beta becomes O(R(exp -1/7)), the viscous correction associated with a thin sublayer near the surface modifies the inviscid growth rate to the leading order. As Beta is further decreased through this regime, viscous effects assume greater significance and dominate the growth-rate behavior. The spatial growth rate becomes comparable to the real part of the wave number when Beta = O(R(exp -1/4)). At this stage, the disturbance structure becomes fully viscous-inviscid interactive and is described by the triple-deck theory. For even smaller values of Beta, the vortex modes become nearly neutral again and align themselves with the direction of the wall-shear stress. Thus, the study explains the progression of the crossflow-vortex structure from the inflectional upper branch mode to nearly neutral long-wavelength modes that are aligned with the wall-shear direction.

Choudhari, Meelan↗

The wavelength dependence of Martian atmospheric dust radiative properties

One of the key radiative agents in the atmosphere of Mars is the suspended dust particles. A new analysis of two data sets of the Martian atmosphere is being carried out in order to better evaluate the radiative properties of the atmospheric dust particles. The properties of interest are the size distribution, optical constants, and other radiative properties, such as the single-scattering albedo and phase function. Of prime importance is the wavelength dependence of these radiative properties throughout the visible and near-infrared wavelengths. Understanding the wavelength dependence of absorption and scattering characteristics will provide a good definition of the influence that the atmospheric dust has on heating of the atmosphere.

Pollack, J. B.↗

Effect of Refractive Index Variation on Two-Wavelength Interferometry for Fluid Measurements

Two wavelength interferometry can in principle be used to measure changes in both temperature and concentration in a fluid, but measurement errors may be large if the fluid dispersion is small. This paper quantifies the effects of uncertainties in dn/dT and dn/dC on the measured temperature and concentration when using the simple expression dn = (dn/dT)dT + (dn/dC)dC. For the data analyzed here, ammonium chloride in water from -5 to 10(exp infinity) C over a concentration range of 2-14% and for wavelengths 514.5 and 633 nm, it is shown that the gradients must be known to within 0.015% to produce a modest 10% uncertainty in the measured temperature and concentration. These results show that real care must be taken to ensure the accuracy of refractive index gradients when using two wavelength interferometry for the simultaneous measurement of temperature and concentration.

Mercer, Carolyn R.↗

Cloud Power Spectra-Dependence on Solar Zenith Angle and Wavelength, Implications for Cloud Optical Property Retrievals

Scale breaks (spatial scales at which power-law exponent changes occur) observed in Landsat radiances have proven to be useful indicators of radiative interactions, and have aided the development of improved techniques in the remote sensing of clouds. This work extends previous theoretical studies to absorbing wavelengths by using both Landsat Thematic Mapper (TM) observations and Monte Carlo (MC) simulations to infer the systematic dependencies of power spectral shape on cloud characteristics, illumination conditions, and wavelength. We show that MC simulations operating on a simple fractal model of horizontally inhomogeneous clouds produce power spectra that qualitatively resemble observed spectra. We also show that the decrease in the spectra power-law exponent seen at intermediate scales (referred to as "roughening") as the Sun becomes more oblique is more pronounced at absorbing wavelengths. An automated procedure designed to detect the small scale break location is unable to find systematic differences between TM Band 4 and Band 7, despite the fact that MC simulations point to systematic differences in horizontal fluxes. The effect of these qualitative characteristics of the spatial spectra on the retrieval of cloud optical properties is examined by comparing power spectra of nadir radiances with power spectra of optical properties retrieved using either traditional Independent Pixel Approximation approaches or modifications based on normalized radiance indices and the inverse Non-local Independent Pixel Approximation. Assuming that the actual cloud properties follow perfect scaling behavior at all scales, we show the improvement of the proposed retrieval modifications.

Oreopoulos, Lazaros↗

Multi-Wavelength Observations of 3C 273 in 1993-1995

We present the results of the multi-wavelength campaigns on 3C 273 in 1993-1995. During the observations in late 1993 this quasar showed an increase of its flux for energies >= 100 MeV from about 2.1 x 10(exp -7) photons/sq cm.s to approximately 5.6 x 10(exp -7) photons/sq cm.s during a radio outburst at 14.5, 22 and 37 GHz. However, no one-to-one correlation of the gamma-ray radiation with any frequency could be found. The photon spectral index of the high energy spectrum changed from GAMMA(sub gamma) = (3.20 +/- 0.54) to GAMMA(sub gamma) = (2.20 +/- 0.22) in the sense that the spectrum flattened when the gamma-ray flux increased. Fits of the three most prominent models (synchrotron self-Comptonization, external inverse Comptonization and the proton initiated cascade model) for the explanation of the high gamma-ray emission of active galactic nuclei were performed to the multi-wavelength spectrum of 3C 273 . All three models are able to represent the basic features of the multi-wavelength spectrum. Although there are some differences the data are still not decisive enough to discriminate between the models.

vonMontigny, C.↗

Comparing Galaxy Morphology at Ultraviolet and Optical Wavelengths

We have undertaken an imaging survey of 34 nearby galaxies in far-ultraviolet (FUV, - 1500A) and optical (UBVRI) passbands to characterize galaxy morphology as a function of wavelength. This sample, which includes a range of classical Hubble types from elliptical to irregular with emphasis on spirals at low inclination angle, provides a valuable database for comparison with images of high-z galaxies whose FUV light is redshifted into the optical and, near-infrared bands. Ultraviolet data are from the UIT Astro-2 mission. We present images and surface brightness profiles for each galaxy, and we discuss the wavelength-dependence of morphology for different Hubble types in the context of understanding high-z objects. In general, the dominance of young stars in the FUV produces the patchy appearance of a morphological type later than that inferred from optical images. Prominent rings and circumnuclear star formation regions are clearly evident in FUV images of spirals, while bulges, bars, and old, red stellar disks are faint to invisible at these short wavelengths. However, the magnitude of the change in apparent morphology ranges from dramatic in early-type spirals with prominent optical bulges to slight in late-type spirals and irregulars, in which young stars dominate both the UV and optical emission. Starburst galaxies with centrally concentrated, symmetric bursts display an apparent "E/SO" structure in the FUV, while starbursts associated with rings or mergers produce a peculiar morphology. We briefly discuss the inadequacy of the optically-defined Hubble sequence to describe FUV galaxy images and estimate morphological k-corrections, and we suggest some directions for future research with this dataset.

Stecher, Theodore↗

Method of Controlling Lasing Wavelength(s)

A method is provided to control the lasing wavelength of a laser material without changing or adjusting the mechanical components of a laser device, The rate at which the laser material is pumped with the pumping energy is controlled so that lasing occurs at one or more lasing wavelengths based on the rate. The lasing wavelengths are determined by transition lifetimes and/or energy transfer rates.

Norman P Barnes↗

4D PhaseCam(Trade Mark) Capabilities: Modal Analysis and Multiple-Wavelength Mirror Phasing

The PhaseCam is a dynamic phase shifting interferometer system manufactured by 4D Technology Corporation that is capable of very fast data acquisition. This rapid acquisition extends the capability of conventional interferometry to enable measurement in unstable environments, the generation of phase movies of surface shape and to facilitate modal analysis of structures. The PhaseCam hardware and software have been modified for MSFC to include synchronous modal optical measurement and analysis. These modifications will be discussed and data presented. The dynamic range of a phase shifting measurement is limited by local slope and pixel sampling to lambda/4 wave steps. Two-wavelength techniques can increase the effective measurement wavelength from microns to tens of centimeters and permit the phasing of mirror segments. A two wavelength PhaseCam will be discussed and measurement results presented.

Millerd, James E.↗

A Wavelength Optimization Study on Visible and Infrared Propagation Systems in Coastal Environments

Electro-optical (EO) systems employed for communications, surveillance and weapons systems are commonly assessed in the North American and European continents. However, the atmospheric propagation environment in these regions is often dissimilar to most other parts of the world. In particular, atmospheric dust, industrial pollution, and smoke frequently reduce visibility to less than 5 km in Asia and South America significantly hampering EO system performance. Because atmospheric aerosol species vary considerably in size and chemistry, optimal wavelengths for EO systems vary from region to region. In this paper we examine the extinction effects from aerosol particles and water vapor on a regional basis. Theoretical studies are coupled with visibility and satellite climatologies to make an assessment for the coastal regions of the world. While longer wavelengths permit higher transmission by particles in regions significantly hampered by fine mode particles (such as industrial pollution and smoke), this advantage is commonly offset by high extinction values from water vapor. This offsetting effect is particularly strong in industrial and developing countries in the tropics and sub-tropics such as Southeast Asia and South America. Conversely, the advantage of low water vapor concentrations in longer wavelengths is offset by high mass-extinction efficiencies of atmospheric dust in this portion of the spectrum.

Reid, J. S.↗

High Sensitivity Long-Wavelength Infrared QWIP Focal Plane Array Based Instrument for Remote Sensing of Icy Satellites

GaAs based Quantum Well Infrared Photodetector (QWIP) technology has shown remarkable success in advancing low cost, highly uniform, high-operability, large format multi-color focal plane arrays. QWIPs afford greater flexibility than the usual extrinsically doped semiconductor IR detectors. The wavelength of the peak response and cutoff can be continuously tailored over a range wide enough to enable light detection at any wavelength range between 6 and 20 micron. The spectral band-width of these detectors can be tuned from narrow (Deltalambda/lambda is approximately 10%) to wide (Deltalambda/lambda is approximately 40%) allowing various applications. Furthermore, QWIPs offer low cost per pixel and highly uniform large format focal plane arrays due to mature GaAs/AlGaAs growth and processing technologies. The other advantages of GaAs/AlGaAs based QWIPS are higher yield, lower l/f noise and radiation hardness (1.5 Mrad). In this presentation, we will discuss our recent demonstrations of 640x512 pixel narrow-band, broad-band, multi-band focal plane arrays, and the current status of the development of 1024x1024 pixel long-wavelength infrared QWIP focal plane arrays.

Gunapala, S.↗

High Resolution Imaging of Circumstellar Disks at Millimeter Wavelengths

We update progress on our research program to use high angular resolution imaging of thermal dust continuum emission at millimeter and submillimeter wavelengths to probe the structure of protoplanetary disks and debris disks around nearby stars. Observations at these wavelengths are advantageous because the dust emission is generally optically thin and directly proportional to mass, contrast with stellar photospheres is not problematic, and the wavelength dependence provides information on an important regime of grain sizes. We employ several facilities for state-of-the-art high resolution observations, including the Very Large Array (VLA), the Australia Telescope Compact Array (ATCA), the Plateau de Bure Interferometer (PdBI) of the Institut de RadioAstronomie Millimetrique, the Submillimeter Array (SMA) of the Smithsonian Astrophysical Observatory, and the Caltech Submillimeter Observatory (CSO). Many recent highlights of our program were presented in an invited review on High Angular Resolution Studies of Disks- the Millimetre at IAU Symposium 221, Star Formation at High Angular Resolution, in July 2003.

Wilner, David J.↗

Wavelengths, f-Values, and Cross Sections in the UV Spectra of Astrophysical, Atoms, Ions, and Molecules

Data analysis for Fe III was completed in 2004. The new spectra give wavelengths and some energy levels for Fe III that are at least an order of magnitude more accurate than values in the literature. However, the data set is missing - because they are outside the wavelength range that we can study at Imperial College or with ancillary FT spectroscopy measurements at NIST - important transitions that would allow all energy levels to be determined with improved accuracy. We are assessing collaborations at other labs. We have made test runs with a number of cathodes (pure metals and alloys) in the Penning discharge source and selected four iron group (3d) elements, Cr, Mn, Co, and Ni, for further measurements. Cathodes of pure Cr and Co and an alloy of Ni were found to be best. Mn has not nm stably yet, and other cathode geometries or alloys may need to be assessed. Optimum Penning discharge (PD) lamp conditions (buffer gas, gas pressure, and current/voltage) were established for Co, and investigations are underway for Cr and Ni. Definitive measurements for Co await purchase of new mirrors and photomultiplier tubes that will improve signal to noise ratio. Our plan for the next year is to continue evaluating cathodes and operating conditions through March 05, and then to begin definitive measurements. The UV wavelength measurements made at Imperial College with the unique UV FT spectrometer will be complemented by visible and near IR range measurements at NIST in June and/or July. Approximately one year from now, we intend to visit Lund University to collaborate on lifetime measurements that will allow our branching ration data to be used to determine f-values.

Raymond, John C.↗