Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Two Dimensional Materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Role of chalcogen vacancies and hydrogen in the optical and electrical properties of bulk transition-metal dichalcogenides

Abstract Like in any other semiconductor, point defects in transition-metal dichalcogenides (TMDs) are expected to strongly impact their electronic and optical properties. However, identifying defects in these layered two-dimensional materials has been quite challenging with controversial conclusions despite the extensive literature in the past decade. Using first-principles calculations, we revisit the role of chalcogen vacancies and hydrogen impurity in bulk TMDs, reporting formation energies and thermodynamic and optical transition levels. We show that the S vacancy can explain recently observed cathodoluminescence spectra of MoS 2 flakes and predict similar optical levels in the other TMDs. In the case of the H impurity, we find it more stable sitting on an interstitial site in the Mo plane, acting as a shallow donor, and possibly explaining the often observed n-type conductivity in some TMDs. We also predict the frequencies of the local vibration modes for the H impurity, aiding its identification through Raman or infrared spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Geometric Delocalization in Two Dimensions

We demonstrate the existence of transient two-dimensional surfaces where a random-walking particle escapes to infinity in contrast to localization in standard flat two-dimensional space. We first prove that any rotationally symmetric two-dimensional membrane embedded in flat three-dimensional space cannot be transient. Then we formulate a criterion for the transience of a general asymmetric two-dimensional membrane. We use it to explicitly construct a class of transient two-dimensional manifolds with a nontrivial metric and height function but “zero average curvature,” which we dub “tablecloth manifolds.” The absence of the logarithmic infrared divergence of the Laplace-Beltrami operator in turn implies the absence of weak localization, nonexistence of bound states in shallow potentials, and breakdown of the Mermin-Wagner theorem and Kosterlitz-Thouless transition on the tablecloth manifolds, which may be realizable in both quantum simulators and corrugated two-dimensional materials.

Anderson localization↗
DOE OSTI2020

Success and breakdown of the T-matrix approximation for phonon-disorder scattering

Here, we examine the validity of the widely used T-matrix approximation for treating phonon-disorder scattering by implementing an unfolding algorithm that allows simulation of disorder up to tens of millions of atoms. The T-matrix approximation breaks down for low-energy flexure phonons that play an important role in thermal transport in two-dimensional materials. Furthermore, insights are developed into the success of the T-matrix approximation in describing maximally mass disordered systems. To achieve this, the phonon unfolding formalism is generalized to describe mass disorder and strongly nonperturbative features of the spectrum are connected to the Boltzmann quasiparticle picture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Insights into negative differential resistance in MoS 2 Esaki diodes: A first-principles perspective

MoS 2 is a two-dimensional material with a band gap depending on the number of layers and tunable by an external electric field. The experimentally observed intralayer band-to-band tunneling and interlayer band-to-band tunneling in this material present an opportunity for new electronic applications in tunnel field-effect transistors. However, such a widely accepted concept has yet to be been supported by theoretical investigations based on first principles. In this paper, using density functional theory, in conjunction with nonequilibrium Green's function techniques and our electric field gating method, enabled by a large-scale computational approach, we study the relation between band alignment and transmission in planar and side-stack MoS 2 p–i–n junction configurations. Here, we demonstrate the presence of negative differential resistance for both in-plane and interlayer current, a staple characteristic of tunnel diode junctions, and analyze the physical origin of such an effect. Electrostatic potentials, the van der Waals barrier, and a complex band analysis are also examined for a thorough understanding of Esaki diodes.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Na-functionalized Ir Te 2 monolayer: Suppressed charge ordering and electric field tuned topological phase transition

Two-dimensional materials with atomic thickness usually possess superior tunability by surface adsorption than their bulk counterparts, showing great promise for novel nanotechnologies. In layered transition-metal dichalcogenide IrTe 2 there exhibits complex structural distortions induced by charge ordering, resulting in difficulties for the applications of its corresponding monolayer material. Here, using first-principles calculations, we demonstrate that depositing Na on the surface of the IrTe 2 monolayer can suppress the structural distortion to form a stable NaIrTe 2 sheet. It naturally breaks the inversion symmetry to enable a Rashba-type spin splitting for potential spintronic applications. In addition, the introduced empty Na s band and the valence band of the IrTe 2 monolayer can be inverted by the application of a perpendicular electric field, achieving a quantum phase transition from normal to topological insulator. Such an electric field-controlled topological phase transition is promising for the realization of topological field-effect transistors. Furthermore, these findings not only provide a feasible approach to stabilizing the IrTe 2 monolayer, but also broaden its applications in spintronics and low-dissipation topoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Symmetry analysis of tensors in the honeycomb lattice of edge-sharing octahedra

In this work, we obtain the most general forms of rank-2 and rank-3 tensors allowed by the crystal symmetries of the honeycomb lattice of edge-sharing octahedra for crystals belonging to different crystallographic point groups, including the monoclinic point group 2/$\textit{m}$ and the trigonal (or rhombohedral) point group $\bar{3}$. Our results are relevant for two-dimensional materials, such as α-RuCl 3 , CrI 3 , and the honeycomb iridates. We focus on the magnetic-field-dependent thermal conductivity tensor $κ_{ij}$ (H), which describes a system’s longitudinal and thermal Hall responses, for the cases when the magnetic field is applied along high-symmetry directions, perpendicular to the plane and in the plane. We highlight some unexpected results, such as the equality of fully longitudinal components to partially transverse components in rank-3 tensors for

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Gauge invariance of light-matter interactions in first-principle tight-binding models

In this work, we study the different ways of introducing light-matter interaction in first-principle tight-binding (TB) models. The standard way of describing optical properties is the velocity gauge, defined by linear coupling to the vector potential. In finite systems a transformation to represent the electromagnetic radiation by the electric field instead is possible, albeit subtleties arise in periodic systems. The resulting dipole gauge is a multi-orbital generalization of the Peierls substitution. In this work we investigate the accuracy for both pathways, with particular emphasis on gauge invariance, for TB models constructed from maximally localized Wannier functions. This approach accurately captures the light-matter interaction close to the Fermi level. Focusing on paradigmatic two-dimensional materials, we construct first-principle models and calculate the response to electromagnetic fields in linear response and for strong excitations. Benchmarks against fully converged first-principle calculations allow for ascertaining the accuracy of the TB models. We find that the dipole gauge provides a more accurate description than the velocity gauge in all cases. The main deficiency of the velocity gauge is an imperfect cancellation of paramagnetic and diamagnetic current. Formulating a corresponding sum rule however provides a way to explicitly enforce this cancellation. This procedure corrects the TB models in the velocity gauge, yielding excellent agreement with dipole gauge and thus restoring gauge invariance.

2-dimensional systems↗
DOE OSTI2021

Anomalous exciton transport in response to a uniform in-plane electric field

Excitons are neutral objects that, naively, should have no response to a uniform electric field. Could the Berry curvature of the underlying electronic bands alter this conclusion? In this work, we show that Berry curvature can indeed lead to anomalous transport for excitons in two-dimensional materials subject to a uniform in-plane electric field. Further, by considering the constituent electron and hole dynamics, we demonstrate that there exists a regime for which the corresponding anomalous velocities are in the same direction. We establish the resulting center-of-mass motion of the exciton through both a semiclassical and fully quantum mechanical analysis, and elucidate the critical role of Bloch oscillations in achieving this effect. We identify transition metal dichalcogenide heterobilayers as candidate materials to observe the effect.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Beyond Ohm's law: Bernoulli effect and streaming in electron hydrodynamics

Recent observations of nonlocal transport in ultraclean two-dimensional materials raised the tantalizing possibility of accessing hydrodynamic correlated transport of a many-electron state. However, it has been pointed out that nonlocal transport can also arise from impurity scattering rather than interaction. At the crux of the ambiguity is the focus on linear effects, i.e., Ohm's law, which cannot easily differentiate among different modes of transport. Furthermore we propose experiments that can reveal rich hydrodynamic features in the system by tapping into the nonlinearity of the Navier-Stokes equation. Three experiments we propose will each manifest a unique phenomenon that is well known in classical fluids: the Bernoulli effect, Eckart streaming, and Rayleigh streaming. Analysis of known parameters confirms that the proposed experiments are feasible and the hydrodynamic signatures are within reach of graphene-based devices. Experimental realization of any one of the three phenomena will provide a stepping stone to formulating and exploring the notions of nonlinear electron fluid dynamics with an eye to celebrated examples from classical nonlaminar flows, e.g., pattern formation and turbulence.

2-dimensional systems↗
DOE OSTI2021

Insights into hyperbolic phonon polaritons in h – BN using Raman scattering from encapsulated transition metal dichalcogenide layers

Alternative techniques for probing hyperbolic phonon polaritons (HPPs) in two-dimensional materials will support the development of the emerging technologies in this field. Previous reports have shown that it is possible for W Se 2 monolayers in contact with the hexagonal boron nitride (h– BN) to generate HPPs in the h– BN via Raman scattering. In this paper, we set out our results on HPP Raman scattering induced in h– BN by W Se 2 and Mo Se 2 monolayers including multiple resonances at which the Raman scattering is enhanced. Analysis of the observed Raman line shapes demonstrates that Raman scattering allows HPPs with wave vectors with magnitudes significantly in excess of 15 000 cm –1 to be probed. Finally, we present evidence that the Raman scattering can probe HPPs with frequencies less than the expected lower bound on the reststrahlen band, suggesting new HPP physics still waits to be discovered.

2-dimensional systems↗
DOE OSTI2022

Large change of interlayer vibrational coupling with stacking in Mo 1-x W x Te 2

Stacking variations in quasi-two-dimensional materials can have an important influence on material properties, such as changing the topology of the band structure. Unfortunately, the weakness of van der Waals (vdW) interactions makes it difficult to compute the stacking dependence of properties, and even in a material as simple as graphite the stacking energetics remain unclear. Mo 1 - x W x Te 2 is a material in which three differently stacked phases are conveniently accessible by temperature changes: 1 T ' , T d * , and the reported Weyl semimetal phase T d . Additionally, the transitions proceed via layer sliding, and the corresponding interlayer shear mode (ISM) is relevant not just for the stacking energetics but also for understanding the relationship between Weyl physics and structural changes. However, the interlayer interactions of Mo 1 - x W x Te 2 are not well understood, with wide variation in computed properties. We report inelastic neutron scattering of the ISM in a Mo 0.91 W 0.09 Te 2 crystal. The ISM energies are generally consistent with the linear chain model, as expected given the weak interlayer interaction, though there are some discrepancies from predicted intensities. However, the interlayer force constants K x in the T d * and 1 T ' phases are substantially weaker than that of T d at 75(3) and 83(3)%, respectively. Considering that the relative positioning of atoms in neighboring layers is approximately the same regardless of overall stacking, our results suggest that longer-range influences, such as stacking-induced electronic band-structure changes, may be responsible for the substantial change in the interlayer vibrational coupling and thus the C 55 elastic constant. These findings should elucidate the stacking energetics of Mo 1 - x W x Te 2 and other vdW layered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Fingerprints of composite fermion Lambda levels in scanning tunneling microscopy

A composite fermion (CF) is a topological quasiparticle that emerges from a nonperturbative attachment of vortices to electrons in strongly correlated two-dimensional materials. Similar to noninteracting fermions that form Landau levels in a magnetic field, CFs can fill analogous “Lambda” levels, giving rise to the fractional quantum Hall (FQH) effect of electrons. Here, we show that Lambda levels can be directly visualized through the characteristic peak structure in the signal obtained via spectroscopy with scanning tunneling microscopy (STM) on a FQH state. Complementary to transport, which probes the low-energy properties of CFs, we show that high-energy features in STM spectra can be interpreted in terms of Lambda levels. We numerically demonstrate that STM spectra can be accurately modeled using Jain's CF theory. Our results show that STM provides a powerful tool for revealing the anatomy of FQH states and identifying physics beyond the noninteracting CF paradigm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Observation of van der Waals phonons in the single-layer cuprate ( Bi , Pb ) 2 ( Sr , La ) 2 CuO 6 + δ

Interlayer van der Waals (vdW) coupling is generic in two-dimensional materials such as graphene and transition-metal dichalcogenides, which can induce very low-energy phonon modes. Using high-resolution inelastic hard x-ray scattering, we uncover the ultralow energy phonon mode along the Cu-O bond direction in the high- T c cuprate (Bi,Pb) 2 (Sr,La) 2 ⁢CuO 6+$\delta$ (Bi2201). The energy and full-width half-maximum (FWHM) of these modes are independent of temperature, while their intensity decreases with doping in accordance with an increasing c -axis lattice parameter. Here, we compare the experimental results to first-principles density functional theory simulations and identify the observed mode as a van der Waals phonon, which arises from the shear motion of the adjacent Bi-O layers. This shows that Bi-based cuprate has vibrational properties similar to graphene and transition-metal dichalcogenides, which can be exploited to engineer novel heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural inversion asymmetry in epitaxial ultrathin films of Bi(111)/InSb(111)B

Bismuth (Bi) films hold potential for spintronic devices due to strong spin-orbit coupling. Understanding the growth, surface states, and interactions with the substrate is key to their functionalization. Large-area high-quality (111) Bi ultrathin films were grown on InSb (111)B substrates by molecular beam epitaxy (MBE). Strong film-substrate interactions epitaxially stabilize the (111) orientation and lead to nonequivalent interface potentials. Analysis of angle-resolved photoemission spectroscopy (ARPES) measurements, employed to characterize the evolution of the surface states with film thickness, indicate a crossing at the $\overline{M}$ point, suggesting a topologically trivial phase in the thin film. In conclusion, the results show the presence of interfacial bonds to the substrate breaks inversion symmetry, preventing the semimetal-to-semiconductor transition predicted for freestanding bismuth layers, highlighting the importance of controlled functionalization and surface passivation of two-dimensional materials.

Inbar, Hadass S. [Univ. of California, Santa Barba↗
DOE OSTI2023

Colloquium : Quantum anomalous Hall effect

The quantum Hall (QH) effect, quantized Hall resistance combined with zero longitudinal resistance, is the characteristic experimental fingerprint of Chern insulators—topologically nontrivial states of two-dimensional matter with broken time-reversal symmetry. In Chern insulators, nontrivial bulk band topology is expressed by chiral states that carry current along sample edges without dissipation. Here, the quantum anomalous Hall (QAH) effect refers to QH effects that occur in the absence of external magnetic fields due to spontaneously broken time-reversal symmetry. The QAH effect has now been realized in four different classes of two-dimensional materials: (i) thin films of magnetically (Cr- and/or V-) doped topological insulators in the (Bi,Sb) 2 T 3 family, (ii) thin films of the intrinsic magnetic topological insulator MnBi 2 Te 4 , (iii) moiré materials formed from graphene, and (iv) moiré materials formed from transition-metal dichalcogenides. In this Colloquium, the physical mechanisms responsible for each class of QAH insulator are reviewed, with both differences and commonalities highlighted, and potential applications of the QAH effect are commented upon.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Combining molecular beam epitaxy and low-energy electron microscopy with in situ magnetic susceptibility measurements within an integrated ultrahigh vacuum system

Quantum two-dimensional materials, including ultrathin superconducting films, are of great current research interest. These films are typically fabricated under ultra-high vacuum (UHV) conditions and are sensitive to the environment—prone to oxidation and contamination when exposed to the atmosphere. This hampers the study of their intrinsic properties by standard ex situ techniques. Here, we present a variable-temperature mutual inductance probe system integrated under UHV with molecular beam epitaxy (MBE) synthesis and low-energy electron microscopy, enabling nondestructive in situ characterization of superconducting thin films. The system employs a reflection-type configuration and reaches a low temperature (∼4 K) using a high-cooling-power, vibration-isolated cryocooler. In conclusion, we demonstrate the system performance by measuring the superconducting critical temperature in a copper-oxide thin film.

2D materials↗
DOE OSTI2020

Designing hierarchical nanoporous membranes for highly efficient gas adsorption and storage

Nanoporous membranes with two-dimensional materials such as graphene oxide have attracted attention in volatile organic compounds (VOCs) and H 2 adsorption because of their unique molecular sieving properties and operational simplicity. However, agglomeration of graphene sheets and low efficiency remain challenging. Therefore, we designed hierarchical nanoporous membranes (HNMs), a class of nanocomposites combined with a carbon sphere and graphene oxide. Hierarchical carbon spheres, prepared following Murray’s law using chemical activation incorporating microwave heating, act as spacers and adsorbents. Hierarchical carbon spheres preclude the agglomeration of graphene oxide, while graphene oxide sheets physically disperse, ensuring structural stability. The obtained HNMs contain micropores that are dominated by a combination of ultramicropores and mesopores, resulting in high VOCs/H 2 adsorption capacity, up to 235 and 352 mg/g at 200 ppmv and 3.3 weight % (77 K and 1.2 bar), respectively. Our work substantially expands the potential for HNMs applications in the environmental and energy fields.

42 ENGINEERING↗
DOE OSTI2020

Electrically driven photon emission from individual atomic defects in monolayer WS 2

Quantum dot–like single-photon sources in transition metal dichalcogenides (TMDs) exhibit appealing quantum optical properties but lack a well-defined atomic structure and are subject to large spectral variability. Here, we demonstrate electrically stimulated photon emission from individual atomic defects in monolayer WS 2 and directly correlate the emission with the local atomic and electronic structure. Radiative transitions are locally excited by sequential inelastic electron tunneling from a metallic tip into selected discrete defect states in the WS 2 bandgap. Coupling to the optical far field is mediated by tip plasmons, which transduce the excess energy into a single photon. The applied tip-sample voltage determines the transition energy. Atomically resolved emission maps of individual point defects closely resemble electronic defect orbitals, the final states of the optical transitions. Inelastic charge carrier injection into localized defect states of two-dimensional materials provides a powerful platform for electrically driven, broadly tunable, atomic-scale single-photon sources.

74 ATOMIC AND MOLECULAR PHYSICS↗