Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Travel Reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

NASA Fixed Wing Project: Green Technologies for Future Aircraft Generation

Commercial aviation relies almost entirely on subsonic fixed wing aircraft to constantly move people and goods from one place to another across the globe. While air travel is an effective means of transportation providing an unmatched combination of speed and range, future subsonic aircraft must improve substantially to meet efficiency and environmental targets.The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. Multidisciplinary advances are required in aerodynamic efficiency to reduce drag, structural efficiency to reduce aircraft empty weight, and propulsive and thermal efficiency to reduce thrust-specific energy consumption (TSEC) for overall system benefit. Additionally, advances are required to reduce perceived noise without adversely affecting drag, weight, or TSEC, and to reduce harmful emissions without adversely affecting energy efficiency or noise.The paper will highlight the Fixed Wing project vision of revolutionary systems and technologies needed to achieve these challenging goals. Specifically, the primary focus of the FW Project is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe

Subsonic Transports↗

Investigation of the effects of soluble boron tracking on coupled CTF / NEM, LWR simulations

The primary objective of this study is to evaluate the effects of introducing a boron tracking capability to the COBRA-TF / NEM code coupling. The Pennsylvania State University (PSU) versions of COBRA-TF - CTF, and Nodal Expansion Method (NEM) codes are utilized. Previous implementations of the CTF / NEM coupled code had no capability to model soluble boron feedback effects due to boron transport. This study builds upon the validation and qualification efforts of the boron tracking model implementation in CTF by modeling the boron feedback calculated by the CTF boron tracking model in NEM. The core model chosen for this study is the Purdue MOX/UO{sub 2} core model used in the 2007 OECD/NRC code benchmark study. Following the implementation of an explicit online coupling scheme and accompanying k-search routine, the newly coupled CTF / NEM code version with boron tracking is compared to prior results of the non-boron tracking CTF / NEM code version at steady-state hot full power and hot zero power conditions. It was found that the boron tracking model exhibited little influence on the hot zero power result as expected due to a smaller heat flux, which does not significantly change the moderator density and boron concentration as the moderator travels up the axial core length. Meanwhile the boron tracking model had a much greater impact on the hot full power results, predicting the critical inlet boron concentration to be 9.9 ppm below the non-boron tracking result due to greater and more rapid changes in boron concentration corresponding to the reduction in moderator density from being more rapidly heated. (authors)

97 MATHEMATICS AND COMPUTING↗

Final-stage densification kinetics of direct current–sinteredZrB2

Final-stage sintering was analyzed for nominally phase pure zirconium diboride synthesized by borothermal reduction of high-purity ZrO2. Analysis was conducted on ZrB2 ceramics with relative densities greater than 90% using the Nabarro–Herring stress–directed vacancy diffusion model. Temperatures of 1900°C or above and an applied uniaxial pressure of 50 MPa were required to fully densify ZrB2 ceramics by direct current sintering. Ram travel data were collected and used to determine the relative density of the specimens during sintering. Specimens sintered between 1900 and 2100°C achieved relative densities greater than 97%, whereas specimens sintered below 1900°C failed to reach the final stage of sintering. The average grain size ranged from 1.0 to 14.7 μm. The activation energy was calculated from the slope of an Arrhenius plot that used the Kalish equation. The activation energy was 162 ± 34 kJ/mol, which is consistent with the activation energy for dislocation movement in ZrB2. The diffusion coefficients for dislocation motion that controls densification were 5.1 × 10−6 cm2/s at 1900°C and 5.1 × 10−5 cm2/s at 2100°C, as calculated from activation energy and average grain sizes. This study provides evidence that the dominant mechanism for final-stage sintering of ZrB2 ceramics is dislocation motion.

36 MATERIALS SCIENCE↗

Statistical Considerations for the Design and Execution of NASA's Community Noise Surveys

The World Health Organization defines community noise as noise emitted from all sources apart from noise at an industrial workplace. Example sources include neighborhood and construction noise, noise from road and rail, and air traffic noise. In particular, overland supersonic flights have been banned in the United States since the 1970s based on data accumulated during the 1960s; the degree of reported annoyance from the resulting sonic booms was a key factor leading to the prohibition. In subsequent years, scientific and engineering understanding has led to the potential to produce low amplitude sonic booms, or ‘sonic thumps’, during supersonic flight through aircraft design choices. Aircraft manufacturers have expressed renewed interest in producing supersonic commercial aircraft, but without appropriate changes to regulation, only overseas routes can be traveled supersonically. The National Aeronautics and Space Administration (NASA) will be flying the X-59 demonstrator aircraft in a series of community tests to begin in the 2024 fiscal year. In this presentation we provide some historical context for the current prohibitions on supersonic commercial flight. Using data collected during earlier NASA risk reduction tests, we demonstrate how generalized linear mixed models can be used to inform the functional dose-response response curve. Finally, we discuss some of the challenges in designing the future community studies and generalizing them to a nationally-representative dose-response curve. The study effort will be of national and international importance as the data and models prepared during the community tests will be provided to the International Civil Aviation Organization (ICAO) in order to help noise regulators determine if supersonic flight will be permitted over land once again and at what demonstrable noise levels.

Nathan B Cruze↗

A Semi-Empirical Framework for Interpreting Traveling Wave Ion Mobility Arrival Time Distributions

The inherent structural heterogeneity of biomolecules is an important biophysical property that is essential to their function, but is challenging to characterize experimentally. We present a workflow that rapidly and quantitatively assesses the conformational heterogeneity of peptides and proteins in the gas phase using traveling wave ion mobility (TWIM) arrival time distributions (ATDs). We have established a set of semi-empirical equations that model the TWIM ATD peak width and resolution across a wide range of wave amplitudes (V) and wave velocities (v). In addition, a conformational broadening parameter, δ, can be extracted from this analysis that reports on the contribution of conformational heterogeneity to the broadening of TWIM ATD peak width during ion mobility separation. We use this δ value to evaluate the conformational heterogeneity of a set of helical peptides, and our analysis correlates well with previous peak width observations reported for these ions. Furthermore, we use molecular dynamics simulations to independently investigate the general flexibility of these peptides in the gas phase, and generate similar trends found in experimental TWIM data. Finally, we extended our analysis to Avidin, a 64-kDa homotetramer, and quantify the structural heterogeneity of this intact complex using TWIM ATD data as a function of cross-linking. We observe an initial reduction in δ values as a function of cross-linker concentration, demonstrating the sensitivity of our δ value analysis to changes in flexibility of the assembly. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Bringing v/stols downtown.

V/STOL aircraft design for short haul intercity travel in terms of operating costs, all-weather instruments and noise control

COMMERCIAL AIRCRAFT↗

An estimate of the enroute noise of an advanced turboprop airplane NASA-TM-87302 E-3020 NAS 1.15:87302 HC A02/MF A01

The enroute noise of an Advanced Turboprop powered aircraft was estimated. The measured noise levels were roughly equivalent in annoyance to the noise 15.24 m from an automobile traveling at 80 km/h. It is felt that these levels would not illicit noise complaints from urban areas during the day but might be a slight annoyance in rural areas or in urban areas at night. Although it is not felt that the enroute noise is a major problem, it is indicated that a reduction in the enroute noise could improve the acceptability of advance turboprop airplanes.

Dittmar, J. H.↗

In-Process Melt Separation of Depolymerized PET in PET/PE Blends for Upcycling via Twin-Screw Extrusion

Our previous work focused on depolymerizing polyethylene terephthalate (PET) in twin-screw extrusion, as part of a broader project to continuously separate PET from polyolefins in the melt. This study focused on linear low-density polyethylene (LLDPE) and PET films and the use of ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), and bis(2-hydroxyethyl) terephthalate (BHET) to depolymerize the PET in the extruder to levels above 90% Mw. In this work, the focus will shift to achieving separation of the two polymers in the twin-screw extruder, which is made possible due to a 90% reduction in the Mw of the PET, which caused a decrease of its viscosity by several orders of magnitude. Owing to the viscosity difference and pressure buildup in the die, the low-viscosity PET preferentially exited a degassing vent instead of going through the die. This is because the flow of the PET would travel through a non-pressure vent rather than through a high-pressure die. However, owing to the higher viscosity of the LLDPE, the pressure was too high to pass through such a small diameter vent hole. Supercritical CO 2 (SCCO 2 ) was used to assist in this extraction, but SCCO 2 negatively impacted the overall degree of separation. Through analysis of the separated materials, it was concluded that a high separation of the two materials was achieved. TGA and FTIR confirmed that the material separated from the vent was 100% PET. The material removed from the die was composed of 95% LLDPE and 5% PET.

36 MATERIALS SCIENCE↗

In‐Process Melt Separation of PE/PET Blends for Upcycling via Twin‐Screw Extrusion. Impact of Catalyst Reagents on PET Depolymerization

Part 1 of this work focused on depolymerizing polyethylene terephthalate (PET) in twin-screw extrusion, as part of a broader project to continuously separate PET from polyolefins in the melt. This study focused on linear low-density polyethylene (LLDPE) and PET films and the use of ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), and bis(2-hydroxyethyl) terephthalate (BHET) to depolymerize the PET in the extruder to levels above 90% Mw. In part 2, the focus will shift to achieving separation of the two polymers in the twin-screw extruder, which is made possible due to a 90% reduction in the Mw of the PET, which caused a decrease of its viscosity by several orders of magnitude. Owing to the viscosity difference and pressure buildup in the die, the low-viscosity PET preferentially exited a degassing vent instead of going through the die. This is because the flow of the PET would travel through a non-pressure vent rather than through a high-pressure die. However, owing to the higher viscosity of the LLDPE, the pressure was too high to pass through such a small diameter vent hole. Supercritical CO₂ (SCCO₂) was used to assist in this extraction, but SCCO₂ negatively impacted the overall degree of separation. Through analysis of the separated materials, it was concluded that a very high separation of the two materials was achieved. TGA and FTIR confirmed that the material separated from the vent was 100% PET. The material removed from the die was composed of 90% LLDPE and 10% PET.

36 MATERIALS SCIENCE↗

Possibilities for reducing the aftercavity interaction effect in gyrotrons

This paper addresses the problem of aftercavity interaction in gyrotrons. The term ''aftercavity interaction'' is used for the cyclotron resonance interaction between electrons in a spent beam exiting the microwave cavity and traveling electromagnetic waves propagating from the cavity exit into the output part of a gyrotron. Aftercavity interaction may reduce the interaction efficiency by several percent and spoil the energy distribution of spent electrons, thus reducing the possibility of efficient utilization of depressed collectors. We have used a simple theory to find conditions resulting in the reduction of this effect. In particular, we have shown that both the axial waveguide wall profile and magnetic field distribution should be modified in order to weaken the effect of aftercavity interaction. We verified results of our simple analysis with advanced simulations and demonstrated that they are in good agreement. Result of these studies can be beneficial for the gyrotron efficiency enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strongly nonlinear waves in locally resonant granular chains

In this paper, we explore a recently proposed locally resonant granular system bearing harmonic internal resonators in a chain of beads interacting via Hertzian elastic contacts. In this system, we propose the existence of two types of configurations: (a) small-amplitude periodic traveling waves and (b) dark-breather solutions, i.e. exponentially localized, time-periodic states mounted on top of a non-vanishing background. A remarkable feature distinguishing our results from other settings where dark breathers are observed is the complete absence of precompression in the system, i.e. the absence of a linear spectral band. We also identify conditions under which the system admits long-lived bright breather solutions. Our results are obtained by means of an asymptotic reduction to a suitably modified version of the so-called discrete p-Schrödinger (DpS) equation, which is established as controllably approximating the solutions of the original system for large but finite times (under suitable assumptions on the solution amplitude and the resonator mass). The findings are also corroborated by detailed numerical computations. Long-lived bright breathers are proved to exist over long but finite times, after which numerical simulations indicate that the breathers disintegrate. Finally, in line with these results, we prove that the only exact time-periodic bright breathers consist of trivial linear oscillations, without contact interactions between discrete elements.

97 MATHEMATICS AND COMPUTING↗

Evaluation of the Hazard of Dust Impacts on Interstellar Spacecraft

Spacecraft traveling to nearby stars will experience energetic collisions with interstellar dust grains. For thin structures, such as light sails, grains pass through with little damage. For thick structures, all the grain energy will be deposited, possibly leading to significant damage. This paper presents a quantitative assessment of damage caused by grain-vehicle collisions and designs to reduce damage. Computer simulations of grain-vehicle collisions were performed with a radiation/hydrodynamic code, that models deposition of grain energy in the material, energy transport by conduction and radiation, expansion of the heated volume melting and other damage processes to the surrounding material. It is found that the grain energy is deposited in a long, thin cylindrical volume, creating temperatures larger than 10 7 K. The spreading of this energy can potentially lead to a large damaged volume. Radiation and evaporation can remove energy, thereby limiting the damage. The reduction of damage by the choice of shielding material on the leading surface and by placement of a thin shield in front of the vehicle to atomize and disperse the grains before they hit the main body of the craft is described.

33 ADVANCED PROPULSION SYSTEMS↗

Drag-reduction characteristics of aft-swept wing tips

Results are presented of a study conducted to analyze the potential aerodynamic improvements which can be obtained with aft-swept wing tips at subsonic speeds. A review and summary of previous swept-tip applications and studies are given. Additionally, the through evolution optimized tail-fin shapes of fast-cruising aquatic animals are examined as well as the wing planform shapes of sea birds. These superior long-distance travellers both display lifting-surface planform shapes with increased leading-edge sweep towards the tip. These observations and analytical results obtained with a nonlinear surface-panel method demonstrate that substantial induced-drag improvements can be obtained through the adoption of planform shapes with highly-tapered aft-swept tips.

Van Dam, C. P.↗

Acoustically enhanced heat transport

We investigate the enhancement of heat transfer in the nucleate boiling regime by inducing high frequency acoustic waves (f ∼ 10{sup 6} Hz) on the heated surface. In the experiments, liquid droplets (deionized water) are dispensed directly onto a heated, vibrating substrate. At lower vibration amplitudes (ξ{sub s} ∼ 10{sup −9} m), the improved heat transfer is mainly due to the detachment of vapor bubbles from the heated surface and the induced thermal mixing. Upon increasing the vibration amplitude (ξ{sub s} ∼ 10{sup −8} m), the heat transfer becomes more substantial due to the rapid bursting of vapor bubbles happening at the liquid-air interface as a consequence of capillary waves travelling in the thin liquid film between the vapor bubble and the air. Further increases then lead to rapid atomization that continues to enhance the heat transfer. An acoustic wave displacement amplitude on the order of 10{sup −8} m with 10{sup 6} Hz order frequencies is observed to produce an improvement of up to 50% reduction in the surface temperature over the case without acoustic excitation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhanced Dual Confocal Measurement System

A measurement instrument utilizing dual, chromatic, confocal, distance sensors has been jointly developed by General Atomics (GA) and Sandia National Laboratories (SNL) for thickness and flatness measurement of target components used in dynamic materials properties (DMP) experiments on the SNL Z-Machine (Z). Compared to previous methods used in production of these types of targets, the tool saves time and yields a 4x reduction in thickness uncertainty which is one of the largest sources of error in equation of state (EOS) measurements critical to supporting the NNSA’s Stockpile Stewardship program and computer modeling of high energy density experiments. It has numerous differences from earlier instruments operating on the dual confocal sensor principle to accommodate DMP components including larger lateral travel, longer working distance, ability to measure flatness in addition to thickness, built-in thickness calibration standards for quickly checking calibration before and after each measurement, and streamlined operation. Thickness and flatness of 0.2mm-3.3mm thick sections of diamond machined copper and aluminum can be measured to “sub-micron” accuracy. Sections up to 6mm thick can be measured with as-yet undermined accuracy. Furthermore, samples must have one surface which is flat to within 300µm, lateral dimensions of no more than 50mm x 50mm, and height less than 40mm.

36 MATERIALS SCIENCE↗

SPAR X Technical Report for Experiment 76-22 Directional Solidification of Magnetic Composites

The effects of gravity on Bridgman-Stockbarger directional solidification of off-eutectic Bi/MnBi were studied in reduced gravity aboard the SPAR X flight and compared to normal-gravity investigations and previous eutectic Bi/MnBi SPAR flight experiments. The directional solidification of off-eutectic Bi/MnBi results in either a dendritic structure connected with local cooperative growth or a coupled low volume fraction faceted/non faceted aligned rod eutectic whose Mn macrosegregation, MnBi rod size, interrod spacing, and thermal and magnetic properties are sensitive functions of the solidification processing conditions. Two hypoeutectic and two hypereutectic samples were solidified during 605 sec of furnace travel, with an initial 265 sec low-gravity interval. Comparison Earth-gravity samples were solidified in the same furance assembly under identical processing conditions. Macrosegregation in the low-g samples was consistent with a metastable increase in Mn solubility in the Bi matrix, in partial agreement with previous Bi/MnBi SPAR findings of MnBi volume reduction.

Bethin, J.↗

Boise, Idaho: Improving Air Quality through Alternative Fuels & Reduced Vehicular Travel (City Energy: From Data to Decisions)

This fact sheet "Boise, Idaho: Improving Air Quality through Alternative Fuels & Reduced Vehicular Travel" explains how the City of Boise used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

alternative fuel↗

Global Building Decarbonization Trends and Strategies

It is evident from extreme weather patterns that climate change is impacting the whole world. The consequences in the form of unpredicted severe weather conditions, hurricanes, floods, and wildfires have been disrupting national economies and affecting lives across the globe. As the global economy is recovering from the COVID-19 pandemic, the temporary drop in greenhouse gas (GHG) emissions mainly caused due to travel bans and economic slowdowns is no longer the case and, moving forward, controlling the increase in GHG emissions has emerged as a global challenge. The impact of climate change has enabled an acknowledgement of the challenge and this coincided with the rapid development of clean energy technologies for buildings, transportation, and industrial sectors, while ensuring a significant reduction in costs for their wide implementation.

54 ENVIRONMENTAL SCIENCES↗