Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Trade Studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Integrated Trajectory, Habitat, and Logistics Analysis and Trade Study for Human Mars Missions

Environmental Control and Life Support System (ECLSS) architecture selection has profound implications for mission cost and mass extending far beyond the ECLSS itself. Similarly, other mission architecture decisions – particularly involving transportation systems – can influence optimal ECLSS architectures. Loop closure influences requirements for water, oxygen, and other consumables. System maintainability and reliability influences spares mass and risk. System, consumables, and spares mass interact with transportation system architectures, including propellant demands and propulsion element sizing. All these interactions with other systems must be considered when evaluating ECLSS options. Analyses that focus only on maximizing ECLSS loop closure – or minimizing ECLSS mass, or minimizing ECLSS life cycle cost – may lead to sub-optimal or even counterproductive system architecture and investment decisions at the mission level. For example, an ECLSS architecture that minimizes ECLSS life cycle cost but results in excessively high logistics mass could lead to significantly increased transportation system costs or make interplanetary transportation infeasible. Increased loop closure could result in higher development costs and higher mass if system/spares mass increases outweigh consumables reduction. In addition, systems mass and consumables mass are not directly comparable and have different impacts on propellant requirements, as consumables mass changes over the course of the mission. This paper presents an integrated analysis examining the overall impact of different ECLSS and transportation architectures on Earth departure mass for a crewed Mars mission, including the habitat and transportation systems as well as consumables, spares, and propellant. Key observations are discussed, along with opportunities for further sensitivity analysis and model development. Overall, ECLSS development activities must consider their impacts at the mission level, as part of an integrated system, rather than in isolation.

Mars↗
NASA NTRS2018

Working Fluid Trade Study for a Two-Phase Mechanically Pumped Loop Thermal Control System

NASA Jet Propulsion Laboratory is investigating a two-phase mechanically pumped fluid loop (MPFL) technology for spacecraft thermal control for future planetary space science mission concepts. The two-phase technology combines the potential of single-phase MPFL and the passive two-phase heat pipe systems. Previous two-phase MPFL studies at JPL have identified an evaporator system with a separated flow architecture as providing a robust light mass thermal control system with very high spatial and temporal thermal stability required by the science instruments on these missions. These studies have further identified the thermophysical properties of the working fluid to be key to the performance of a two-phase fluid loop. This paper describes the methodology used in the selection of the working fluids for optimizing the performance of the two-phase MPFL. A high level model was developed that includes the constraints and boundaries driven by the system components. The performance of fluids from the REFPROP database are investigated and rated for this system. The working fluid attributes such as cost, hazardous properties, and heritage were taken into account in this selection. A typical spacecraft dissipating 1000 W and a fluid loop consisting of an evaporator, accumulator, radiator, and associated tubing components is used as an example in this study.

Daimaru, Takuro↗
NASA NTRS2018

Working Fluid Trade Study for a Two-Phase Mechanically Pumped Loop Thermal Control System

NASA Jet Propulsion Laboratory is investigating a two-phase mechanically pumped fluid loop (MPFL) technology for spacecraft thermal control for future planetary space science mission concepts. The two-phase technology combines the potential of single-phase MPFL and the passive two-phase heat pipe systems. Previous two-phase MPFL studies4,5 at JPL have identified an evaporator system with a separated flow architecture as providing a robust light mass thermal control system with very high spatial and temporal thermal stability required by the science instruments on these missions. These studies have further identified the thermophysical properties of the working fluid to be key to the performance of a two-phase fluid loop. This paper describes the methodology used in the selection of the working fluids for optimizing the performance of the two-phase MPFL. A high level model was developed that includes the constraints and boundaries driven by the system components. The performance of fluids from the REFPROP database were investigated and rated for this system. The working fluid attributes such as cost, hazardous properties, and heritage were taken into account in this selection. A typical spacecraft dissipating 1000 W and a fluid loop consisting of an evaporator, accumulator, radiator, and associated tubing components was used as an example in this study.

Daimaru, Takuro↗
NASA NTRS2021

GRACE Fast Mascons from Spherical Harmonics and a Regularization Design Trade Study

Mass concentration (mascon) solutions have become a prominent medium for investigating time-variable gravity recovered by GRACE and GRACE Follow-On. While GRACE Level-2 spherical harmonic products require various post-processing techniques to eliminate correlated noise, mascon formulations employ spatial regularization strategies during the estimation step to improve signal recovery. However, mascon estimation has traditionally required large computing resources and GRACE Level-1B processing capabilities. In this study, we show that a typical mascon estimation system can be reformulated to allow for the estimation of regularized mascons from Level-2 spherical harmonics. Provided that spherical harmonic solution covariances are available, the computed mascons will be mathematically equivalent to similar mascons estimated from Level-1B observations. This method is computationally efficient, better leverages GRACE spherical harmonics than past methods, and matches the performance of typical mascon solutions without locking scientists into pre-determined regularization designs. We develop a proof-of-concept solution using ITSG-Grace2018 and compare results with traditional mascons from JPL and NASA GSFC. We then assess the effects of spherical harmonic truncation and use of regularization correlations on basin signal recovery. We find that spherical expansions to degree and order 60 provide the minimum expansion necessary to study most basins, while larger expansions help further localize signals. We also find that diagonal regularizations (i.e., regularizations that do not contain inter-mascon correlations) are adversely affected by leakage, especially across boundaries such as coastlines where signals are not highly correlated, whereas including inter-mascon correlations and regional boundaries in the regularization greatly improves signal recovery.

M. J. Croteau↗
NASA NTRS2022

Trade Study of DEM Software

Review of Open-source Discrete Element Method Softwares: Three open-source solutions have been investigated for integration into OceanWATERS: Yade, EsysParticle, and ProjectChrono.

DEM↗
NASA NTRSDate not supplied

Payload Fairing Acoustic Trade Study: Fill Effect Modeling

A review of acoustic fill effect was conducted using vibroacoustic models of the NASA Space Launch System Block 1B 8.4-meter Payload Fairing. Fill effect is the term used to describe how sound pressure levels (SPLs) inside of a launch vehicle’s payload cavity change when a payload is present, compared to that of an unfilled cavity. Several vibroacoustic models with various payload shapes were developed and the deviation in output from an unfilled cavity model were compared to an analytical fill effect calculation. The analytical expression for the fill effect correction factor, known as the fill factor, is published in NASA-STD-7001B. The development and validation of the NASA fill factor is discussed to provide context for this study and define important variables including the volume fill percentage and the fairing-payload separation gap. The fill factor is reviewed from two perspectives; a global perspective which defines the volume ratio with respect to the entire fairing cavity, and a local perspective which defines the volume ratio with respect to a zone of interest dependent on the payload’s height. The global perspective was considered because it allows a decoupling of the volume ratio and fairing-payload separation gap variables. Both the global and local fill factor methods have difficulty capturing low frequency SPL because of a breakdown in the underlying assumptions of a diffuse acoustic field. Spatial variation in the pressure field at low frequency showed that axially oriented standing waves may be of concern for sensitive payload components; radial variation in SPL was found to be less significant. Further, a novel secondary derivation of the theoretical fill factor is posed for future work in which the absorption characteristics of the payload and fairing surfaces are considered. This work is supported by the NASA Glenn Research Center and the Space Launch System Payload Fairing Working Group.

Spacecraft environments↗
NASA NTRSDate not supplied

SUbsonic Single Aft eNgine (SUSAN) Electrofan Trade Study Overview

SUSAN uses a 20MW class Electrified Aircraft Propulsion system to enable advanced Propulsion Airframe Integration (PAI) in transport category aircraft. Alternative fuels will be used to reduce the amount of emissions per energy used. By combining these features there is the potential to reduce aircraft emissions by 50% per passenger/mile while retaining the size, speed, and range of large regional jets.

Ralph Jansen↗
NASA NTRSDate not supplied

Pressurized Rover Lunar Surface Windows Thermal Trade Study

The pressurized rover (PR) is a habitable lunar vehicle that supports up to two crew members and EVAs. The PR is expected to operate with a crew at the lunar south pole for up to 30 consecutive days. Lunar surface missions represent a significant thermal challenge due in part to the extreme changes in temperature environment. Minimizing heat leaks is essential to be able to survive cold phases of lunar surface missions. Windows in particular can be a significant source of heat leak when designed without thermal performance in mind. In addition, correctly modeling windows, and transparent materials in general, represents a significant thermal challenge. It can also be challenging to obtain accurate radiative properties for modern window materials. This study focuses on the modeling approach, results, and possible window heat leak mitigation techniques for pressurized rover. Mitigation techniques explored in this study include low emissivity coatings and removable internal or external covers. Window layup, geometry, and size are also assessed in this study for their impact to heat leak.

Sydney June Taylor↗
NASA NTRS2024

Wheel Module Motor Trade Study for Lunar Terrain Vehicle Thermal Control System

Conducting a lunar mission, whether it is a robotic mission or one with astronauts, has many challenges; one of which is the thermal control of the motors of the wheel module that are used to propel and steer the vehicle. This paper describes the thermal analysis approach, design assumptions, and results of passive thermally controlled wheel module motors, meaning there are not cold plates, fluid loops, or other active thermal control methods to controlling the temperatures. It will also highlight challenges faced in the design of wheel modules for a rover on the lunar south pole. There are three main design change approaches that are considered, the first one keeps the nominal design with the motors mounted at the wheel hub on each wheel, but the motors have lower temperature limits. The second approach requires no thermal control of the motors, allowing them to get below the manufacturers lowest thermal limit and warming them back up prior to actuation during the lunar day. The last approach moves the motors inside of the main body of the vehicle.

Thermal Control System↗