Electroplated Tin absorbers in Microcalorimeter Detectors for Ionizing Radiation.
Abstract not provided.
Arrington, Christian Lew↗
SEARCH · Engineering Papers
Results for “TiN”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Oxide Derived Tin Nanospheres for Efficient CO 2 Electroreduction to Formate
240th ECS Digital Meeting, Virtual, December 10-14, 2021
Nguyen Phan, Thuy Duong↗
Experiments and Simulations of Laser-Driven Tin Ejecta Microjets
Explore the source record for details and available documents.
Physics↗
Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity
A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarter wave cavities (that are subsequently smaller) as well as for significantly lowered cooling requirements (possibly leading to cryocooler based designs). The fabrication, initial cold testing, and Nb3Sn coating are discussed as well as test plans and details of future applications.
43 PARTICLE ACCELERATORS↗
Anomalously Weak Plastic Response of BCT gamma-Tin Under High-Rate Compression
Explore the source record for details and available documents.
Materials science↗
Interaction mechanism of transition metal phthalocyanines on transition metal nitride supports
Here, we investigated the electronic interactions between transition metal phthalocyanine (TMPc’s) on a refractory transition metal nitride support, specifically copper phthalocyanine (CuPc) on titanium nitride (TiN). X-ray Photoelectron Spectroscopy (XPS) results suggest a presence of a few nanometer native oxide layer on the surface of the TiN nanoparticles, which consists of TiN, TiO 2 , and Titanium oxynitrides (Ti x O y N z ). A TiNCuPc nanocomposite was synthesized via a simple mixing method due to the strong binding between CuPc and TiN confirmed by density functional theory (DFT) calculations. Both XPS data and DFT calculations revealed an electron transfer from TiN substrate to CuPc molecule. The nature of charge transfer is not influenced by the presence of an oxide layer on the surface of TiN. Substantial deviations are however found between photoelectron emission microscopy (PEEM) measured work function for TiN (4.68 eV) and theoretically calculated work function for pristine stoichiometric TiN (2.63 eV). This behavior is attributed to the presence of an oxide layer on the TiN surface. TiNCuPc composite system has a work function value between those of TiN and CuPc. Our studies open up an opportunity to apply a new class of materials based on transition metal phthalocyanine/transition metal nitride composites to catalysis and optoelectronic devices.
36 MATERIALS SCIENCE↗
XANES analysis of phosphate glasses melted with Tb 4 O 7 and SnO: evaluating the impact of valence states on structural, thermal, and luminescent properties
Barium phosphate glasses were prepared with 0.5 mol% Tb 4 O 7 added alongside SnO up to 5 mol% with the purpose of evaluating the resulting terbium and tin oxidation states and their impact on glass structural, thermal, and luminescent properties. In this work, following material synthesis by melt-quenching, the composition-structure–property investigation was pursued encompassing measurements by X-ray diffraction (XRD), X-ray absorption near-edge spectroscopy (XANES), Raman spectroscopy, differential scanning calorimetry (DSC), dilatometry, and photoluminescence (PL) spectroscopy. While XRD confirmed the amorphous nature of the glasses, results from XANES indicated that terbium occurs as terbium(III) with a predisposition for tin to exist as tin(IV) which decreased at high SnO content. The structural as well as the thermal properties appeared to be mostly impacted by the presence of tin(IV). Specifically, glass depolymerization was indicated to be induced by Sn 4+ ions, and their concentration was observed to correlate with glass transition and softening temperatures. On the other hand, the tin(II) remnants were observed to exert an impact on the luminescent properties shifting light emission from the green towards the blue-green (cyan). It is indicated that Tb 4 O 7 reacting to produce Tb 2 O 3 supports the oxidation of tin(II) to tin(IV) which in turn dominates the physical properties. However, this was somewhat circumvented at the highest SnO content wherein tin(IV) appeared to be lower.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Titanium Nitride as an Intermetallic Diffusion Barrier for Hydrogen Permeation in Palladium–Vanadium Composite Membranes
Hydrogen purification is a critical industrial process, and there are ongoing efforts to develop low-cost alternatives to palladium foil membranes. Titanium nitride (TiN) is studied as an interdiffusion barrier to enable hydrogen permeation in composite palladium–vanadium membranes. TiN was deposited via reactive sputtering, and films with the desired (200) orientation were obtained in the metallic regime at 400 °C under a 200 V bias to the substrate. The permeability of thin-film TiN was determined with palladium-based sandwich structures. TiN layers up to 10 nm resulted in a minimal decrease in flux (~20%) relative to a freestanding PdCu foil, which was attributed to the interfacial resistance. At greater thicknesses, the TiN layer was rate-limiting, and it was found that the effective permeability of the sputtered TiN thin films was ~6 × 10−12 mol s−1 m−1 Pa−0.5. Composite Pd|TiN|V|TiN|Pd membranes exhibited permeability values up to three times greater than pure palladium, exhibiting stability at 450 °C for over 100 h, with the lack of intermetallic diffusion and alloy formation being confirmed with XRD. The membranes were unstable at 500 °C, which was attributed to the instability of the thin Pd layer and loss of catalytic activity.
Biochemistry & Molecular Biology↗
Realizing tunable Fermi level in SnTe by defect control
The tuning of the Fermi level in tin telluride, a topological crystalline insulator, is essential for accessing its unique surface states and optimizing its electronic properties for applications such as spintronics and quantum computing. In this study, we demonstrate that the Fermi level in tin telluride can be effectively modulated by controlling the tin concentration during chemical vapor deposition synthesis. By introducing tin-rich conditions, we observed a blue shift in the x-ray photoelectron spectroscopy core-level peaks of both tin and tellurium, indicating an upward shift in the Fermi level. Further, this shift is corroborated by a decrease in work function values measured via ultraviolet photoelectron spectroscopy, confirming the suppression of Sn vacancies. Our findings provide a low-cost, scalable method to achieve tunable Fermi levels in tin telluride, offering a significant advancement in the development of materials with tailored electronic properties for next-generation technological applications.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Enhancing Acidic Oxygen Evolution Activity by Controlling Oxidation State of Iridium
Iridium oxides with high oxidation states have been reported to be effective in enhancing the acidic oxygen evolution reaction (OER) performance. In this work, we develop ultrasmall IrO x nanoparticles (NPs) over titanium nitride (TiN), which undergoes surface oxidation under oxidative conditions to form oxygen‐modified TiN (oxi‐TiN), enabling the formation of highly oxidized Ir δ+ (δ > 4). This IrO x /oxi‐TiN catalyst delivers higher Ir mass activity than commercial IrO 2 , while comparable stability is maintained. The superior OER activity of IrO x /oxi‐TiN is further demonstrated in a proton exchange membrane water electrolyzer (PEMWE), requiring only 1.88 V to reach 3 A cm −2 , achieving the U.S. Department of Energy 2025 target (1.90 V at 3 A cm −2 ). In situ X‐ray absorption spectroscopy (XAS) confirms that the superior OER activity of IrO x /oxi‐TiN originates from highly oxidized Ir δ+ under OER conditions. Density functional theory (DFT) calculations reveal a general correlation between the oxidation state of Ir and OER overpotential. Specifically, the introduction of interfacial oxygen at the Ir/TiN interface increases the oxidation state of deposited Ir δ+ from δ < 4 to δ > 4, decreasing the OER overpotential. This study highlights the critical role of high oxidation states of Ir δ+ in enhancing OER activity, providing guidance for the development of advanced acidic OER catalysts.
58 GEOSCIENCES↗
Computational discovery of a novel double transition metal nitride MXene and its applications as an anchoring and catalytic material in Li–Se batteries
Double transition metal (DTM) nitride MXenes offer enhanced electrical conductivity and tunable catalytic properties compared to conventional carbide-based MXenes. In this study, we employed first-principles density functional theory (DFT) calculations to discover and computationally validate a novel DTM nitride MXene, Nb 2 TiN 2 , derived from its MAX phase precursor and investigated its potential as an anchoring material (AM) for Li–Se batteries. This newly proposed MXene expands the compositional landscape of DTM nitrides and opens new avenues for functional material design. We performed a comprehensive analysis of the thermodynamic and electronic properties of Nb 2 TiAlN 2 , and the MAX phase precursor to Nb 2 TiN 2 to assess its structural stability and exfoliation potential. Exfoliation energy calculations confirmed the feasibility of synthesizing Nb 2 TiN 2 from Nb 2 TiAlN 2 . We then explored the functionalized form, Nb 2 TiN 2 S 2 , evaluating its capability to serve as an effective anchoring material (AM) in Li–Se batteries by analyzing the reaction mechanisms and kinetics of the selenium reduction reaction (SeRR). Our results indicate that Nb 2 TiN 2 S 2 exhibits a strong binding affinity for lithium polyselenides (Li 2 Se n ), effectively suppressing the shuttle effect. Gibbs free energy calculations for the rate-limiting step of the SeRR reveal favorable kinetics and reduced reaction barriers. Overall, this study provides a detailed evaluation of the structural and electronic properties of a newly proposed DTM nitride MXene and its S-functionalized derivative and the catalyzing effect of Nb 2 TiN 2 S 2 in accelerating the reaction kinetics in Li–Se batteries. These findings underscore the potential importance of the further exploration of MXenes to address current challenges in high-performance Li–Se batteries.
25 ENERGY STORAGE↗
Stable and selective catalysts for propane dehydrogenation operating at thermodynamic limit
Hitting the limits on propene synthesis The greater abundance of propane from shale gas has spurred efforts to use it as a propylene feedstock. Direct dehydrogenation catalysts consisting of platinum–tin alloy nanoparticles supported on alumina often must run with hydrogen dilution to avoid carbon buildup and excess tin to avoid alloy segregation. Motagamwala et al. report that platinum–tin nanoparticles interact more weakly with a silica support and the metals thus do not segregate. The use of undiluted reactants allowed the reaction to run near the thermodynamically limit of about 67% conversion with a selectivity to propylene of more than 99%. This catalyst also does not build up carbon and could run up to 30 hours without deactivation. Science , abg7894, this issue p. 217
Science & Technology - Other Topics↗
Causes of Degradation of Organ Pipes with Very Low Lead Content
This study investigates the causes of degradation in organ pipes with low lead content. Using light This study investigates the causes of degradation in organ pipes with low lead content. Using light optical microscopy, SEM/EDS, and TEM/EDS, intermetallic Cu6Sn5, FeSn2, Sn4As3, and Pb particles were observed in the structure of SnPb alloys. Degradation of the low-Pb organ metal, which is primarily caused by the selective corrosion of lead occurring due to the effect of volatile organic compounds (VOCs). Another factor leading to degradation is the structural transformation of tin occurring at low temperatures (tin pest). TEM/EDS allowed the unique observation of α-tin particles found in a β-tin matrix at room temperature. The presence of particles of α‑tin in historical organ pipes has not previously been reported, and it is the first presented observation of all.
alloy SnPb↗
Plasmon mediated deposition of Ni on titanium nitride nanoparticles: Applications in enhanced photoreduction of bicarbonate
A suitably designed plasmonic catalyst can provide versatile and energy-efficient strategies to utilize visible light to drive different catalytic reactions. Here we have successfully developed composite plasmonic catalysts by visible-light-induced deposition of popular transition metal nanocatalysts such as Ni and Pt on refractory plasmonic titanium nitride (TiN) nanoparticles. Here, the catalytic properties of the TiN composite nanoparticles were evaluated using the visible light-mediated bicarbonate to formate reduction reaction in the presence of glycerol as the hole-scavenger. Deposition of Ni and Pt nanocatalysts on TiN significantly improves its catalytic efficiency towards the reaction. However, Ni deposited on TiN nanoparticles exhibited better catalytic properties in comparison to that of TiN_Pt composites. The findings of this study can be used to develop stable and efficient visible light-responsive plasmonic composite catalysts which can accelerate different energy extensive reactions.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Diels–Alder Augmented Epoxies with Plasmonic Nanoparticle Fillers for Efficient Photothermal Depolymerization
Thermally reversible epoxies through the Diels–Alder (DA) reaction have been used for applications such as recycling, self-healing, and 3D printing. Depolymerization by bulk heating, however, would be a slow and inefficient process due to its low thermal conductivity. In this paper, photothermal conversion using refractory plasmonic titanium nitride (TiN) nanoparticles was employed for efficient and rapid depolymerization of reversible epoxies. TiN nanoparticles have superior thermal stability, broader light absorption, and higher light-to-heat conversion efficiency. They are also less expensive than more common plasmonic gold nanoparticles. Photothermal behavior of TiN nanoparticle-filled reversible epoxies was investigated as a function of concentration of TiN nanoparticles and as a function of the intensity of a light source. TiN nanoparticles could induce sufficient heat for depolymerization with a trace content, 0.01% by weight, under a broad-spectrum white light of intensity 1760 mW/cm 2 instead of a strong light source such as a laser. The reversible epoxies were prepared by a reaction between furan precursors and a bismaleimide compound. Crosslinking density was controlled by altering the architecture of furan precursors and the feed ratio between the furan precursor and the bismaleimide compound. These changes in chemical structure and degree of crosslinking permit the control of the thermomechanical properties of the reversible epoxy from soft elastomers to hard elastomers. Here, the reversible epoxies display a flow region at around 110 °C. Depolymerization through the retro-DA was confirmed by Fourier transform infrared spectroscopy as a function of duration at a high temperature. Light-induced removability and recyclability were demonstrated by adhesion tests using the reversible epoxy/nanoparticle composites.
36 MATERIALS SCIENCE↗
Three-Dimensional Reconstruction of Nb 3 Sn Films by Focused Ion Beam Cross Sectional Microscopy
Niobium has been the material of choice for SRF cavities for several decades due to its formability and superconducting properties. The accelerating gradient of niobium cavities is, however, rapidly approaching a theoretical limit. To achieve higher accelerating gradients a new material is needed that can sustain high fields. Nb 3 Sn is a promising competitor with a higher superconducting transition temperature and a higher critical field than pure niobium. However, Nb 3 Sn is very brittle and cannot be formed readily into a cavity. The main method for creating Nb 3 Sn cavities is to form a Nb 3 Sn film into a niobium surface using a tin vapor-diffusion method. This technique creates a microcrystalline Nb 3 Sn thin film on the inner surface of the cavity. Tin depleted regions are known to form in the film during this process. Previous studies have analyzed these regions using transmission electron microscopy on cross-sectional lamellae prepared by focused ion beam/scanning electron microscope (FIB/SEM). This method does not provide any three-dimensional (3-D) information about the distribution of tin-deficient regions. In this study we employ a focused ion beam tomographic technique to analyze the 3-D structure of the film. Electron dispersive X-ray spectroscopy is used to image the tin concentration of the film in 3-D. Tin-deficient regions are discovered close to the surface of the Nb 3 Sn film.
Viklund, E.↗
Reactive flash sintering of TiZrN and TiAlN ternary metal nitrides
Here, this study demonstrated the reactive flash sintering (RFS) for two powder mixtures: TiN-ZrN (both conducting) and AlN-TiN (TiN conducting but AlN insulating), targeting ternary metal nitrides (TMN) of Ti 0.5 Zr 0.5 N and Ti 0.5 Al 0.5 N, respectively. A constant volage and pressure (e.g., 8 V DC, ∼15 MPa) at room temperature triggered the flash (current density up to 27 A/mm 2 ) without pre-heating, and the entire RFS process finished in a few minutes. For TiZrN, the flash was instantaneous whereas for TiAlN, there was a long incubation before the flash followed by a quick and dramatic flash. Both conventional ex situ XRD and in situ synchrotron study had been carried out. They showed a uniform Ti 0.57 Zr 0.43 N solution formed in RFS and persisted upon cooling, while (Ti, Al) N solid solution formed at high temperature was not stable and likely went through a very quick phase separation in the cooling process. The final products from RFS had been characterized using SEM/EDS for microstructure. Both TiZrN and TiAlN were dense. Distribution of Ti, Zr, and N was uniform for TiZrN; for TiAlN, Ti and N distribution was uniform, while association of Al with oxygen was observed. TGA-DSC revealed the onset oxidation temperature for TiZrN was comparable to TiN and ZrN, while it was higher by ∼200 °C for TiAlN, likely due to the formation of Al 2 O 3 . In terms of mechanical properties such as hardness or fracture toughness, forming a single-phase solid solution (like TiZrN) does not offer obvious benefits. while large grain size from RFS seemed to be unfavorable. Future optimization of RFS condition and in-depth study by both experiments and simulation are needed to fully understand the composition-processing-structure-property relationships for such TMN from the reactive flash sintering process.
Flash Sintering↗
Fabrication of superconducting Nb 3 Sn film by Co-sputtering
High-efficiency SRF cavities are the key technology to construct cost-effective CW SRF accelerators. Improvements in the efficiency of SRF cavities are realized by using novel materials, such as niobium-tin. Advances in niobium-tin coatings on the inner surface of SRF cavities showed the potential for this material to increase the operating temperature of the SRF cavity to above 4 K, leading to significant reduction of the capital and operating cost of SRF accelerators. Among the techniques used to apply the niobium-tin coating to the surface of the SRF cavity is sputtering. Old Dominion University, Jefferson Lab, and Fermilab are collaborating on developing an optimized niobium-tin coating of the inside surface of niobium SRF cavities using a recently-developed cylindrical sputtering system. This research will result in optimized sputtering coating techniques leading to high efficiency SRF structures.
42 ENGINEERING↗