Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Templates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Faster rates with less catalyst in template-directed reactions

We have recently shown that the polycytidylic acid-directed polymerization of guanosine 5'-monophosphate 2-methylimidazolide (2-MeImpG) is amenable to kinetic study and that rate determinations as a function of 2-MeImpG concentration can reveal much mechanistic detail (Kanavarioti et al. 1993). Here we report kinetic data which show that, once the reaction has been initiated by the formation of dimers, the elongation of dimers to form longer oligomers is accelerated by decreasing polycytidylate (poly(C)) concentration from 0.05 to 0.002 M. This result is consistent with the previously proposed mechanism. The increase in the observed pseudo-first order rate constant for formation of the trimer, k3', and the corresponding constant for formation of oligomers longer than the trimer, ki' (ki' is independent of oligomer length for i > or = 4), with decreasing template concentration for a given monomer concentration is attributed to an increase in template occupancy as template concentration is reduced.

NASA Discipline Exobiology↗

Information transfer from peptide nucleic acids to RNA by template-directed syntheses

Peptide nucleic acids (PNAs) are uncharged analogs of DNA and RNA in which the ribose-phosphate backbone is substituted by a backbone held together by amide bonds. PNAs are interesting as models of alternative genetic systems because they form potentially informational base paired helical structures. A PNA C10 oligomer has been shown to act as template for efficient formation of oligoguanylates from activated guanosine ribonucleotides. In a previous paper we used heterosequences of DNA as templates in sequence-dependent polymerization of PNA dimers. In this paper we show that information can be transferred from PNA to RNA. We describe the reactions of activated mononucleotides on heterosequences of PNA. Adenylic, cytidylic and guanylic acids were incorporated into the products opposite their complement on PNA, although less efficiently than on DNA templates.

NASA Discipline Exobiology↗

Effect of Silica and Mixing Time on Microstructures of Porous Polymer Composite by Emulsion Templating

Porous polymer composite with tailored porosity is applied in the myriads of areas such as energy storage, oil/water absorption, bioengineering, and advanced areas of material science. The emulsion templating technology is one of the most popular methods for synthesizing porous polymer composite. It involves solidifying a two-phase mixture of porogen and polymer, then removing porogen to create pores within the continuous emulsion phase by polymerization or curing. The surfactant plays a pivotal role in accomplishing a stable emulsion, a key factor in designing the internal porous structure. This study highlights the effect of silica filler and mixing time on pore morphology, i.e., shape, size, and distribution. on polydimethylsiloxane (PDMS) porous structure utilizing the water-in-oil emulsion templating method. Span® 80 is used as a surfactant to reduce the surface tension between water, silica, and PDMS and simultaneously create a strong foaming effect. Different weight concentrations of silica (1-10 wt%) were chosen while keeping the internal phase, i.e., water (50 wt%) constant. The designed porous structures were further characterized through scanning electron microscopy (SEM). Porous composite specimens fabricated with higher silica content and mixing time consistently exhibit smaller pore sizes than specimens fabricated with lower mixing time and silica content. A breakthrough of pore morphology is seen at silica content higher than 5wt% at 1 min mixing, however, pore morphology drastically changes when mixing time increases from 1 min to 6 min. Variation of finer mixing time beyond 1 min shows stepwise changes in pore morphology from a large single-phase porous structure to a bi-modal porous structure which eventually become a smaller single-mode porous structure. Thus, the emulsion templating technique, in combination with different filler content and mixing time, will effectively aid in designing engineered porous polymer composite with varying stiffness and pore morphology.

Porous polymer, Emulsion templating, Surfactant, P↗

Erratic Dislocations within Funnel Defects in AlN Templates for AlGaNEpitaxial Layer Growth

We report our transmission electron microscopy observations of erraticdislocation behavior within funnel-like defects in the top of AlN templates filled withAlGaN from an overlying epitaxial layer. This dislocation behavior is observed inmaterial where phase separation is also observed. Several bare AlN templates wereexamined to determine the formation mechanism of the funnels. Our results suggest that they are formed prior to epitaxial layer deposition due to the presence of impuritiesduring template re-growth. We discuss the erratic dislocation behavior in relation to thepresence of the phase-separated material and the possible effects of these defects on the optoelectronic properties.

36 MATERIALS SCIENCE↗

Tuning the composition and nanostructure of Pt/Ir films via anodized aluminum oxide templated atomic layer deposition.

Nanostructured metal films have been widely studied for their roles in sensing, catalysis, and energy storage. In this work, the synthesis of compositionally controlled and nanostructured Pt/Ir films by atomic layer deposition (ALD) into porous anodized aluminum oxide templates is demonstrated. Templated ALD provides advantages over alternative synthesis techniques, including improved film uniformity and conformality as well as atomic-scale control over morphology and composition. Nanostructured Pt ALD films are demonstrated with morphological control provided by the Pt precursor exposure time and the number of ALD cycles. With these approaches, Pt films with enhanced surface areas, as characterized by roughness factors as large as 310, are reproducibly synthesized. Additionally, nanostructured Ptlr alloy films of controlled composition and morphology are demonstrated by templated ALD, with compositions varying systematically from pure Pt to pure Ir. Lastly, the application of nanostructured Pt films to electrochemical sensing applications is demonstrated by the non-enzymatic sensing of glucose.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mesoporous mixed metal oxides derived from P123-templated Mg-Al layered double hydroxides

We report the preparation of mesoporous mixed metal oxides (MMOs) through a soft template method. Different amounts of P123 were used as structure directing agent to synthesize P123-templated Mg-Al layered double hydroxides (LDHs). After calcination of as-synthesized LDHs at 500 {sup o}C, the ordered mesopores were obtained by removal of P123. The mesoporous Mg-Al MMOs fabricated by using 2 wt% P123 exhibited a high specific surface area of 108.1 m{sup 2}/g, and wide distribution of pore size (2-18 nm). An investigation of the 'memory effect' of the mesoporous MMOs revealed that they were successfully reconstructed to ibuprofen intercalated LDHs having different gallery heights, which indicated different intercalation capacities. Due to their mesoporosity these unique MMOs have particular potential as drug or catalyst carriers. - Graphical abstract: Ordered mesoporous Mg-Al MMOs can be obtained through the calcination of P123-templated Mg-Al-CO{sub 3} LDHs. The pore diameter is 2.2 nm. At the presence of ibuprofen, the Mg-Al MMOs can recover to Mg-Al-IBU LDHs, based on its 'remember effect'. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, crystal structures and luminescent properties of two 4d-4f Ln-Ag heterometallic coordination polymers based on anion template

Two new 4d-4f Ln-Ag heterometallic coordination polymers, {l_brace}[Ln{sub 3}Ag{sub 5}(IN){sub 10}(H{sub 2}O){sub 7}].4(ClO{sub 4}).4(H{sub 2}O){r_brace}{sub n} (Ln=Eu (1) and Sm (2), HIN=isonicotinic acid), have been synthesized under hydrothermal conditions by reactions of Ln{sub 2}O{sub 3}, AgNO{sub 3}, HIN and HClO{sub 4}, and characterized by elemental analysis, IR, thermal analysis and single-crystal X-ray diffraction. It is proved that HClO{sub 4} not only adjusts the pH value of the reaction mixture, but also acts as anion template. The structure determination reveals that 1 and 2 are isostructural and feature a novel two-dimensional (2D) layered hetrometallic structure constructed from one-dimensional Ln-carboxylate chains and pillared Ag(IN){sub 2} units. The 2D layers are further interlinked through Ag...Ag and Ag...O(ClO{sub 4}{sup -}) multiple weak interactions, which form a rare Ag-ClO{sub 4} ribbon in lanthanide-transition metal coordination polymers, to give rise to a three-dimensional supramolecular architecture. Moreover, the luminescent properties of these two compounds have also been investigated at room temperature. -- Graphical abstract: Two new anion-templated 2D 4d-4f Ln-Ag heterometallic coordination polymers based on novel lanthanide-carboxylate chains and pillared Ag(IN){sub 2} units, {l_brace}[Ln{sub 3}Ag{sub 5}(IN){sub 10}(H{sub 2}O){sub 7}].4(ClO{sub 4}).4(H{sub 2}O){r_brace}{sub n} (Ln=Eu (1) and Sm (2), HIN=isonicotinic acid), have been hydrothermally synthesized and structurally characterized. 1 and 2 exhibit good luminescent properties. Display Omitted Research highlights: > Two 2D Eu (Sm)-Ag coordination polymers templated by perchlorate anion have been synthesized. > Polymers consist of novel 1D lanthanide-carboxylate chains. > In both structures, there are rare Ag...Ag and Ag...O(ClO{sub 4}{sup -}) multiple weak interactions. > Both compounds exhibit good luminescent properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structure of [C{sub 6}N{sub 4}H{sub 20}]{sub 0.5}[B{sub 5}O{sub 6}(OH){sub 4}]: A new organically templated pentaborate with white-light-emission

A new organically templated pentaborate [C{sub 6}N{sub 4}H{sub 20}]{sub 0.5}[B{sub 5}O{sub 6}(OH){sub 4}] (1a) was prepared by reactions of triethylenetetramine (TETA) with excess boric acid in aqueous solution and characterized by elemental analysis, FTIR, TG-DTA, powder X-ray diffraction and photoluminescence spectroscopy. The structure of 1a was determined by a single-crystal X-ray diffraction. It crystallizes in the monoclinic system with space group P2(1)/c, a=9200(3) A, b=14.121(5) A, c=10.330(4) A, {beta}=91.512(4){sup o}, V=1341.4(9) A{sup 3}, and Z=4. The luminescent properties of the compound were studied, and a green-blue luminescence occurs with an emission maximum at 507 nm upon excitation at 430 nm. The photoluminescence of 1a can be modified from green-blue to white by means of a simple heat-treatment process. The white-light-emission of sample 1c makes the pentaborate a good candidate for display and lighting applications in the white LED. - Graphical abstract: A green-blue luminescence occurs with an emission maximum at 507 nm upon excitation at 430 nm. The photoluminescence of 1a can be modified from green-blue to white by means of a simple heat-treatment process. Highlights: > A new organically templated pentaborate [C{sub 6}N{sub 4}H{sub 20}]{sub 0.5}[B{sub 5}O{sub 6}(OH){sub 4}] has been prepared. > The structure of the compound is determined by single-crystal X-ray diffraction. > Elemental analysis, FTIR, TG-DTA, powder X-ray diffraction and photoluminescence spectroscopy of the compound is investigated. > The photoluminescence of the compound can be modified from green-blue to white by means of a simple heat-treatment process. > The TETA molecules were diprotonated and located in the channels isolatedly as templates and counterions to compensate the negative charges of the framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of amorphous mesoporous silica using TEMPO-functionalized amphiphilic templates

Inorganic–organic hybrid materials based on amorphous mesoporous silica containing organized nitroxide radicals within its mesopores have been prepared using the micellar self-assembly of TEOS solutions containing the nitroxide functionalized amphiphile (4-(N,N-dimethyl-N-hexadecylammonium)-2,2,6, 6-tetramethyl-piperidin-N-oxyl-iodide) (CAT-16). This template has been used both in its pure form and in various mixtures with cetyl trimethylammonium bromide (CTAB). The samples have been characterized by chemical analysis, N{sub 2} sorption studies, magnetic susceptibility measurements, and various spectroscopic methods. While electron paramagnetic resonance (EPR) spectra indicate that the strength of the intermolecular spin–spin interactions can be controlled via the CAT-16/CTAB ratio, nuclear magnetic resonance (NMR) data suggest that these interactions are too weak to facilitate cooperative magnetism. - Graphical abstract: The amphiphilic radical CAT-16 is used as a template for the synthesis of amorphous mesoporous silica. The resulting paramagnetic hybrid materials are characterized by BET, FTIR, NMR, EPR and magnetic susceptibility studies. - Highlights: • Amphiphilic CAT-16 as a template for mesoporous silica. • Comprehensive structural characterization by BET, FTIR; EPR and NMR. • Strength of radical-radical interactions tuable within CAT-16/CTAB mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterometallic metal-organic framework-templated synthesis of porous Co{sub 3}O{sub 4}/ZnO nanocage catalysts for the carbonylation of glycerol

The efficient synthesis of glycerol carbonate (GLC) has recently received great attention due to its significance in reducing excess glycerol in biodiesel production as well as its promising applications in several industrial fields. However, the achievement of high conversion and high selectivity of GLC from glycerol in heterogeneous catalytic processes remains a challenge due to the absence of high-performance solid catalysts. Herein, highly porous nanocage catalysts composed of well-mixed Co{sub 3}O{sub 4} and ZnO nanocrystals were successfully fabricated via a facile heterometallic metal-organic framework (MOF)-templated synthetic route. Benefiting from a high porosity and the synergistic effect between Co{sub 3}O{sub 4} and ZnO, the as-prepared composite catalysts exhibited a significantly enhanced production efficiency of GLC in the carbonylation reaction of glycerol with urea compared to the single-component counterparts. The yield of GLC over the Co{sub 50}Zn{sub 50}-350 catalyst reached 85.2%, with 93.3% conversion and near 91% GLC selectivity, and this catalytic performance was superior to that over most heterogeneous catalysts. More importantly, the proposed templated synthetic strategy of heterometallic MOFs facilitates the regulation of catalyst composition and surface structure and can therefore be potentially extended in the tailoring of other metal oxide composite catalysts. - Graphical abstract: Highly porous Co{sub 3}O{sub 4}/ZnO nanocages were fabricated via a heterometallic MOF-templated route and exhibited a significantly enhanced photocatalytic performance in the production of glycerol carbonate. Display Omitted - Highlights: • Porous Co{sub 3}O{sub 4}/ZnO nanocages were synthesized by a facile thermolysis route of heterometallic MOFs. • The as-prepared nanocages possessed massive pores and Co{sub 3}O{sub 4}/ZnO heterojunctions. • The Co{sub 3}O{sub 4}/ZnO ratio in the composites was easily adjusted by tuning the Co/Zn ratio in the precursors. • The composite catalysts exhibited a significantly enhanced production efficiency of glycerol carbonate in the carbonylation reaction of glycerol with urea.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct template synthesis of mesoporous carbon and its application to supercapacitor electrodes

A direct templating method which is facile, inexpensive and suitable for the large scale production of mesoporous carbon is reported herein. A meso-structure surfactant/silicate template was made in a solution phase and resorcinol-formaldehyde as a carbon precursor was incorporated into the template solution. After aging, carbonization and hydrofluoric acid (HF) etching, mesoporous carbon was obtained. Using X-ray diffraction, scanning and transmission electron microscopy and nitrogen sorption, the synthesis mechanism of the mesoporous carbon was elucidated. According to the small angle X-ray scattering measurements, the surface became smoother after the removal of the silica, indicating that the silica was mostly located at the pore surface of the carbon. Also, the calculation of the pore volume demonstrated that the silica was transferred into the pores of the carbon without structural collapse during HF etching. When the prepared mesoporous carbon was applied to a supercapacitor electrode, the rectangular shape of the cyclic voltammogram was less collapsed, even at a high scan rate, which is indicative of its high rate capability. This was due to the low resistance of the electrolyte in the pores (3.8 {Omega} cm{sup 2}), which was smaller than that of conventional activated carbon electrodes and even comparable to that of ordered mesoporous carbon electrodes. This improved performance was probably due to the well developed mesoporosity and high pore connectivity of the prepared mesoporous carbon.

36 MATERIALS SCIENCE↗

Bio-template route for facile fabrication of Cd(OH){sub 2}@yeast hybrid microspheres and their subsequent conversion to mesoporous CdO hollow microspheres

Cadmium oxide (CdO) microspheres with a porous hollow microstructure were prepared by a facile yeast mediated bio-template route. The yeast provides a solid scaffold for the deposition of cadmium hydroxide (Cd(OH){sub 2}) from cadmium acetate and sodium hydroxide solutions to form the hybrid Cd(OH){sub 2}@yeast precursor. Thermal conversions of this at above 500 {sup o}C in air have produced hollow CdO microspheres. The products were characterized by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), thermal gravimetric and differential thermal analysis (TGA-DTA), and Brunauer-Emmett-Teller (BET) surface analysis respectively. The obtained CdO microspheres have uniform size (length = 2.6 {+-} 0.4 {mu}m; width = 2.0 {+-} 0.2 {mu}m) and a well defined, continuous, mesoporous hollow microstructure. The shell is about 250-280 nm in thickness. The mechanism of formation of Cd(OH){sub 2}@yeast precursor and its conversion to CdO hollow microspheres is discussed. In comparison with traditional template-directed method, the present strategy represents a general, economical and environmentally benign route for the formation of metal oxide hollow microspheres. These materials have potential applications in different fields such as encapsulation, drug delivery, efficient catalysis, battery materials and photonic crystals. The method presented can be extended to the synthesis of other inorganic hollow microstructures of different sizes and shapes by pre-selecting suitable bio-templates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chitosan as template for the synthesis of ceria nanoparticles

Graphical abstract: Cerium oxide nanoparticles with cubic fluorite structure were prepared using chitosan as template, cerium nitrate as a starting material and sodium hydroxide as a precipitating agent. Calcinated powders at 350 {sup o}C contain agglomerated particles with average particle size of {approx}4 nm, very high porosity and foam-like morphology formed by open and close pores. Highlights: {yields} Pure CeO{sub 2} nanoparticles can take place using chitosan as template. {yields} A porous material was obtained. {yields} Blueshifts in the ultraviolet absorption spectra have been observed in cerium oxide nanocrystallites. -- Abstract: Cerium oxide (CeO{sub 2}), nanoparticles were prepared using chitosan as template, cerium nitrate as a starting material and sodium hydroxide as a precipitating agent. The resultant ceria-chitosan spheres were calcined at 350 {sup o}C. The synthesized powders were characterized by, XRD, HRTEM, UV-vis, FTIR, and TG-DTA. The average size of the nanoparticles obtained was {approx}4 nm and BET specific surface area {approx}105 m{sup 2} g{sup -1}. Blueshifts in the ultraviolet absorption spectra have been observed in cerium oxide nanocrystallites. The band-gap was found to be 4.5 eV. The blueshifts are well explained for diameters down to less than a few nanometers by the change in the electronic band structure.

60 APPLIED LIFE SCIENCES↗

Template-directed preparation of two-layer porous NiO film via hydrothermal synthesis for lithium ion batteries

Graphical abstract: A two-layer porous NiO film is prepared via hydrothermal synthesis method based on monolayer polystyrene sphere template and shows noticeable Li battery performance with good cycle life and high capacity. Highlights: ► Two-layer porous NiO film is prepared via monolayer polystyrene spheres template. ► NiO film with high capacity as anode material for lithium ion batteries. ► Two-layer porous structure is favorable for fast lithium ion and electron transfer. -- Abstract: A two-layer porous NiO film is prepared by hydrothermal synthesis method through self-assembled monolayer polystyrene spheres template. The substructure of the NiO film is composed of ordered close-packed hollow-sphere array and the superstructure is made up of randomly NiO nanoflakes. The electrochemical properties are measured by galvanostatic charge/discharge tests and cyclic voltammetric analysis (CV). As anode material for lithium ion batteries, the two-layer porous NiO film exhibits high initial coulombic efficiency of 75%, high reversible capacity and rather good cycling performance. The discharge capacity of the two-layer porous NiO film is 501 mAh g{sup −1} at 0.5 C after 50 cycles. The two-layer porous architecture is responsible for the enhancement of electrochemical properties.

36 MATERIALS SCIENCE↗

Ultrasound-assisted synthesis of CuO nanostructures templated by cotton fibers

Highlights: ► Flower-like and corn-like CuO nanostructures were synthesized by a simple method. ► Cotton fibers purchased from commercially are used as template. ► The concentration of Cu(NO{sub 3}){sub 2} solution is an important parameter. -- Abstract: Flower-like and corn-like CuO nanostructures composed of CuO nanoparticles were successfully synthesized via ultrasound-assisted template method, respectively, by controlling the initial concentration of Cu(NO{sub 3}){sub 2} solution. Here, cotton fibers were used as template agent. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM) and energy-dispersive spectroscopy (EDS), respectively. The results demonstrated that the initial concentration of Cu(NO{sub 3}){sub 2} solution was an important parameter for determining whether CuO nanoparticles assembled into flower-like structures or corn-like structures. The mechanism of forming different nanostructures of CuO was discussed.

36 MATERIALS SCIENCE↗

Y{sub 2}O{sub 3}:Yb/Er nanotubes: Layer-by-layer assembly on carbon-nanotube templates and their upconversion luminescence properties

Graphical abstract: Well-shaped Y{sub 2}O{sub 3}:Yb/Er nanotubes have been successfully synthesized on a large scale via layer-by-layer assembly on carbon nanotubes templates followed by a subsequent heat treatment process. The as-prepared Y{sub 2}O{sub 3}:Yb/Er nanotubes show a strong red emission corresponding to the {sup 4}F{sub 9/2}–{sup 4}I{sub 15/2} transition of the Er{sup 3+} ions under excitation at 980 nm. Display Omitted Highlights: ► Well-shaped Y{sub 2}O{sub 3}:Yb/Er nanotubes have been successfully synthesized. ► CNTs were used as templates for Y{sub 2}O{sub 3}:Yb/Er nanotubes. ► LBL assembly and calcination were used for preparation of Y{sub 2}O{sub 3}:Yb/Er nanotubes. ► The as-prepared Y{sub 2}O{sub 3}:Yb/Er nanotubes show a strong red emission. -- Abstract: Well-shaped Y{sub 2}O{sub 3}:Yb/Er nanotubes have been successfully synthesized on a large scale via layer-by-layer (LBL) assembly on carbon nanotubes (CNTs) templates followed by a subsequent heat treatment process. The crystal structure, element analysis, morphology and upconversion luminescence properties were characterized. XRD results demonstrate that the diffraction peaks of the samples calcinated at 800 °C or above can be indexed to the pure cubic phase of Y{sub 2}O{sub 3}. SEM images indicate that a large quantity of uniform and rough nanotubes with diameters of about 30–60 nm can be observed. The as-prepared Y{sub 2}O{sub 3}:Yb/Er nanotubes show a strong red emission corresponding to the {sup 4}F{sub 9/2}–{sup 4}I{sub 15/2} transition of the Er{sup 3+} ions under excitation at 980 nm, which have potential applications in such fields as nanoscale devices, molecular catalysts, nanobiotechnology, photonics and optoelectronics.

36 MATERIALS SCIENCE↗

Preparation of frustule-like 1,2-ethylene-silica nanospheres through a chiral amphiphile/organic solvent dual-templating approach

Graphical abstract: Display Omitted Highlights: ► Frustule-like 1,2-ethylene-silicas were prepared through a dual-templating approach. ► The morphologies and pore architectures of the 1,2-ethylene-silicas are tunable. ► Mesoporous 1,2-ethylene-silica nanotubes were also prepared. -- Abstract: Hollow silica nanospheres with mesopores in the walls have been widely studied because of their potential applications in catalysis and drug release. Hollow organosilica nanospheres also attracted much attention because of their tunable wall backbones and wider applications. Herein, frustule-like 1,2-ethylene-silicas were obtained using a chiral amphiphile, CHCl{sub 3}, and a dual-templating approach. The morphologies and pore architectures of the 1,2-ethylene-silicas are tunable by changing the amount of CHCl{sub 3} in the reaction mixture. With the addition of CHCl{sub 3} in the reaction mixtures, hollow 1,2-ethylene-silica nanospheres with opened mesopores in the walls were feasible. Moreover, 1,2-ethylene-silicas with mesopores on the surfaces and coiled pore channels within the walls were obtained using the chiral amphiphile in a single-templating approach. These 1,2-ethylene-silicas were characterized using field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction and N{sub 2} sorptions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystalline mesoporous tungsten oxide nanoplate monoliths synthesized by directed soft template method for highly sensitive NO{sub 2} gas sensor applications

Graphical abstract: Display Omitted Highlights: ► Mesoporous WO{sub 3} nanoplate monoliths were obtained by direct templating synthesis. ► Enable effective accession of the analytic molecules for the sensor applications. ► The WO{sub 3} sensor exhibited a high performance to NO{sub 2} gas at low temperature. -- Abstract: Controllable synthesis of nanostructured metal oxide semiconductors with nanocrystalline size, porous structure, and large specific surface area is one of the key issues for effective gas sensor applications. In this study, crystalline mesoporous tungsten oxide nanoplate-like monoliths with high specific surface areas were obtained through instant direct-templating synthesis for highly sensitive nitrogen dioxide (NO{sub 2}) sensor applications. The copolymer soft template was converted into a solid carbon framework by heat treatment in an inert gas prior to calcinations in air to sustain the mesoporous structure of tungsten oxide. The multidirectional mesoporous structures of tungsten oxide with small crystalline size, large specific surface area, and superior physical characteristics enabled the rapid and effective accession of analytic gas molecules. As a result, the sensor response was enhanced and the response and recovery times were reduced, in which the mesoporous tungsten oxide based gas sensor exhibited a superior response of 21,155% to 5 ppm NO{sub 2}. In addition, the developed sensor exhibited selective detection of low NO{sub 2} concentration in ammonia and ethanol at a low temperature of approximately 150 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗