Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Ion Beam And Plasma Jet Generated By A 3 kJ Plasma Focus

The plasma focus device is well known as a copious source of X-ray, neutrons, ion and electron beams. In this work, the characteristics of energetic ion beam emission in a 3 kJ Mather-type plasma focus is studied. The plasma focus system is operated at low pressure with argon as the working gas. The objective of the project is to obtain the argon ion beam and the plasma jet. The ion beam and plasma jet are used for material processing. In order to investigate the effect of the ion beam and plasma jet, crystalline silicon substrates are placed above the anode. Samples obtained after irradiation with the plasma focus discharge are analyzed by using the Scanning electron microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDX).

36 MATERIALS SCIENCE↗

Preliminary Results Of A 600 Joules Small Plasma Focus Device

Preliminary results of a 600 J (3.7 muF, 18 kV) Mather type plasma focus device operated at low pressure will be presented. The discharge is formed between a solid anode with length of 6 cm and six symmetrically and coaxially arranged cathode rods of same lengths. The cathode base is profiled in a knife-edge design and a set of coaxial plasma gun are attached to it in order to initiate the breakdown and enhance the current sheath formation. The experiments have been performed in argon gas under a low pressure condition of several microbars. The discharge current and the voltage across the electrodes during the discharge are measured with high voltage probe and current coil. The current and voltage characteristics are used to determine the possible range of operating pressure that gives good focusing action. At a narrow pressure regime of 9.0+-0.5 mubar, focusing action is observed with good reproducibility. Preliminary result of ion beam energy is presented. More work will be carried out to investigate the radiation output.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of the magnetic surface function gradient in stellarators with broken stellarator symmetry

The computation of the gradient of the magnetic surface function, nablapsi, plays an essential role in plasma physics, e.g., for investigations of plasma equilibrium currents or transport fluxes in stellarators. The evaluation of nablapsi becomes more complicated if the magnetic field B does not exhibit stellarator symmetry. Here, a scheme for computation of nablapsi for magnetic configurations which do not show stellarator symmetry is presented. The proposed method is based on computations of gradients of integrals of magnetic field line equations. This new technique for nablapsi calculations is applied to Uragan-2M [O. S. Pavlichenko for the U-2M group, Plasma Phys. Controlled Fusion 35, B223 (1993)]. Taking into account the influence of current feeds and detachable joints of the helical winding the magnetic configuration does not exhibit stellarator symmetry. Computations of nablapsi, the effective ripple epsilon{sub eff}, and the geometrical factor lambda{sub b} for the bootstrap current in the 1/nu transport regime are performed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a synthetic phase contrast imaging diagnostic

A ''synthetic diagnostic'' has been developed to calculate the expected experimental response of phase contrast imaging (PCI), a scattering diagnostic used to measure density fluctuations in laboratory plasmas, to a tokamak discharge modeled with the GYRO nonlinear gyrokinetic code [J. Candy and R. Waltz, J. Comput. Phys. 186, 545 (2003)]. The synthetic PCI includes the spatial response of the experimental diagnostic, primarily implemented as a line integral of plasma density along the beam path, and the minimum and maximum wavenumber response resulting from the detection scheme. The synthetic PCI can be used for comparisons between GYRO and experiment as well as studies of the PCI response.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On steady poloidal and toroidal flows in tokamak plasmas

The effects of poloidal and toroidal flows on tokamak plasma equilibria are examined in the magnetohydrodynamic limit. ''Transonic'' poloidal flows of the order of the sound speed multiplied by the ratio of poloidal magnetic field to total field B{sub {theta}/}B can cause the (normally elliptic) Grad-Shafranov (GS) equation to become hyperbolic in part of the solution domain. It is pointed out that the range of poloidal flows for which the GS equation is hyperbolic increases with plasma beta and B{sub {theta}/}B, thereby complicating the problem of determining spherical tokamak plasma equilibria with transonic poloidal flows. It is demonstrated that the calculation of the hyperbolicity criterion can be easily modified when the assumption of isentropic flux surfaces is replaced with the more tokamak-relevant one of isothermal flux surfaces. On the basis of the latter assumption, a simple expression is obtained for the variation of density on a flux surface when poloidal and toroidal flows are simultaneously present. Combined with Thomson scattering measurements of density and temperature, this expression could be used to infer information on poloidal and toroidal flows on the high field side of a tokamak plasma, where direct measurements of flows are not generally possible. It is demonstrated that there are four possible solutions of the Bernoulli relation for the plasma density when the flux surfaces are assumed to be isothermal, corresponding to four distinct poloidal flow regimes. Finally, observations and first principles-based theoretical modeling of poloidal flows in tokamak plasmas are briefly reviewed and it is concluded that there is no clear evidence for the occurrence of supersonic poloidal flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current sheath behavior and its velocity enhancement in a low energy Mather-type plasma focus device

The dynamics of the plasma sheath layer and its velocity enhancement have been studied in a low energy (4.9 kJ) Mather-type plasma focus device. Experiments were performed to study the effect of the Lorentz force variation on the current sheath expansion and movement, as well as the existence of traction between all parts of the sheath layer. Two different shape of anodes (cylindrical and step) along with an axial magnetic probe were used to investigate the effects of various experimental conditions, namely different charging voltages and gas pressures. In order to explore the upper limit of the current sheath velocity, a comparison has been made between the experimental data gathered by the probe and the Lee's computational model. The limitations governing the enhancement of the current sheath velocity that can lead to the deterioration of a good focusing phenomenon were also investigated. The increase of the current sheath velocity due to the usage of the step anode on ion generation and hard x-ray emissions have been demonstrated by means of an ion collector and a hard x-ray detector.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neoclassical transport simulations for stellarators

The benchmarking of the thermal neoclassical transport coefficients is described using examples of the Large Helical Device (LHD) and TJ-II stellarators. The thermal coefficients are evaluated by energy convolution of the monoenergetic coefficients obtained by direct interpolation or neural network techniques from the databases precalculated by different codes. The temperature profiles are calculated by a predictive transport code from the energy balance equations with the ambipolar radial electric field estimated from a diffusion equation to guarantee a unique and smooth solution, although several solutions of the ambipolarity condition may exist when root-finding is invoked; the density profiles are fixed. The thermal transport coefficients as well as the ambipolar radial electric field are compared and very reasonable agreement is found for both configurations. Together with an additional W7-X case, these configurations represent very different degrees of neoclassical confinement at low collisionalities. The impact of the neoclassical optimization on the energy confinement time is evaluated and the confinement times for different devices predicted by transport modeling are compared with the standard scaling for stellarators. Finally, all configurations are scaled to the same volume for a direct comparison of the volume-averaged pressure and the neoclassical degree of optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental investigation of the trigger problem in magnetic reconnection

Magnetic reconnection releases magnetic energy not only in steady state, but also in time-dependent and often explosive events. Here, we investigate the trigger mechanism for this explosive release by using a toroidal experiment in the strong guide-field regime. We observe spontaneous reconnection events with exponentially growing reconnection rates, and we characterize the full 3D dynamics of these events using multiple internal probes. The reconnection is asymmetric: it begins at one toroidal location and propagates around in both directions. The spontaneous onset is facilitated by an interaction between the x-line current channel and a global mode, which appears in the electrostatic potential. It is this mode which breaks axisymmetry and enables a localized decrease in x-line current. We apply a simple model - which relies on ion polarization currents for current continuity - to reproduce the exponential growth and compute the growth rate. The result agrees well with the experimental growth rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Discoveries from the exploration of gyrokinetic momentum transport

The momentum transport due to gyroradius scale turbulence in tokamak plasmas is very complex. In general, some type of breaking of the parity of the gyrokinetic equation under simultaneous reflection of the poloidal angle and the sign of the parallel velocity phase space coordinate (poloidal parity) is always involved. There are three distinct types of poloidal parity breaking effects. In this paper, all three types of poloidal parity breaking are explored using the quasi-linear trapped gyro-Landau fluid [G. M. Staebler et al., Phys. Plasmas 12, 102508 (2005)] transport code. Selected results are verified with full nonlinear turbulence simulations using the gyro [J. Candy et al., J. Comput. Phys. 186, 545 (2003)] gyrokinetic code. The observable properties like an energy pinch driven by a parallel velocity shear and a dependence of momentum transport on the direction of the ion grad-B drift relative to the X-point location in single null divertor geometry have been discovered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation of a long-lived hot field reversed configuration by dynamically merging two colliding high-{beta} compact toroids

A high temperature field reversed configuration (FRC) has been produced in the newly built, world's largest compact toroid (CT) facility, C-2, by colliding and merging two high-{beta} CTs produced using the advanced field-reversed {theta}-pinch technology. This long-lived, stable merged state exhibits the following key properties: (1) apparent increase in the poloidal flux from the first pass to the final merged state, (2) significantly improved confinement compared to conventional {theta}-pinch FRCs with flux decay rates approaching classical values in some cases, (3) strong conversion from kinetic energy into thermal energy with total temperature (T{sub e} + T{sub i}) exceeding 0.5 keV, predominantly into the ion channel. Detailed modeling using a new 2-D resistive magnetohydrodynamic (MHD) code, LamyRidge, has demonstrated, for the first time, the formation, translation, and merging/reconnection dynamics of such extremely high-{beta} plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neoclassical Toroidal Plasma Viscosity Torque in Collisionless Regimes in Tokamaks

Bumpiness in a magnetic field enhances the magnitude of the plasma viscosity and increases the rate of the plasma flow damping. A general solution of the neoclassical toroidal plasma viscosity (NTV) torque induced by nonaxisymmetric magnetic perturbation (NAMP) in the collisionless regimes in tokamaks is obtained in this Letter. The plasma angular momentum can be strongly changed, when there is a small deviation of the toroidal symmetry caused by a NAMP of the order of 0.1% of the toroidal field strength.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of Magneto-Rayleigh-Taylor Instability Growth during the Implosion of Initially Solid Al Tubes Driven by the 20-MA, 100-ns Z Facility

The first controlled experiments measuring the growth of the magneto-Rayleigh-Taylor instability in fast ({approx}100 ns) Z-pinch plasmas are reported. Sinusoidal perturbations on the surface of an initially solid Al tube (liner) with wavelengths of 25-400 {mu}m were used to seed the instability. Radiographs with 15 {mu}m resolution captured the evolution of the outer liner surface. Comparisons with numerical radiation magnetohydrodynamic simulations show remarkably good agreement down to 50 {mu}m wavelengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transport Bifurcation in a Rotating Tokamak Plasma

The effect of flow shear on turbulent transport in tokamaks is studied numerically in the experimentally relevant limit of zero magnetic shear. It is found that the plasma is linearly stable for all nonzero flow shear values, but that subcritical turbulence can be sustained nonlinearly at a wide range of temperature gradients. Flow shear increases the nonlinear temperature gradient threshold for turbulence but also increases the sensitivity of the heat flux to changes in the temperature gradient, except over a small range near the threshold where the sensitivity is decreased. A bifurcation in the equilibrium gradients is found: for a given input of heat, it is possible, by varying the applied torque, to trigger a transition to significantly higher temperature and flow gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pressure insensitivity of a high-{beta} quasi-isodynamic stellarator

The sensitivity of a high-{beta} quasi-isodynamic stellarator equilibrium with respect to changes of the plasma pressure is investigated. It is shown that a plasma boundary near to the high-{beta} boundary exists with the property that the magnetohydrodynamic and drift-kinetic properties of the associated low-{beta} plasma are similar.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-Pinch And Its Applications In X-ray Radiograph

An X-pinch device and the related diagnostics of x-ray emission from X-pinch were briefly described. The time-resolved x-ray measurements with photoconducting diodes show that the x-ray pulse usually consists of two subnanosecond peaks with a time interval of about 0.5 ns. Being consistent with these two peaks of the x-ray pulse, two point x-ray sources of size ranging from 100 mum to 5 mum and depending on cut-off x-ray photon energy were usually observed on the pinhole pictures. The x-pinch was used as x-ray source for backlighting of the electrical explosion of single wire and the evolution of X-pinch, and for phase-contrast imaging of soft biological objects such as a small shrimp and a mosquito.

07 ISOTOPE AND RADIATION SOURCES↗

Studying Radiation from Z-pinch Wire Array and X-Pinch Plasmas: K-shell Mg to M-shell Mo

University-scale Z-pinch generators are able to produce plasmas with a broad range of temperatures, densities, and opacity properties depending on the type, size, and mass of wire-array loads and wire materials. Experiments with very different Z-pinch loads were performed on the 1 MA Zebra generator at UNR and analyzed during the last five years including Single and Nested Cylindrical, Conical, and various types of Planar Wire Arrays. It is shown that such wire arrays are good sources of x-rays and that they produce significant radiation yield (up to 25 kJ) on a ns time scale, and generate bright spots of sub-mm size. They can be used for studying radiative properties of moderate density (between 10{sup 18} cm{sup -3} and 5x10{sup 21} cm{sup -3}) and temperature (<=1.5 keV) plasmas. In addition, X-pinches generated higher density (>10{sup 22} cm{sup -3}) and temperature (>2 keV) plasmas on scales as small as a few mum to several mm in size. Wire materials with a broad range of nuclear charge Z were used, ranging from low-Z, such as alloyed Al wires with varying concentrations of Mg, to mid-Z, such as Stainless steel, Cu, Brass, and Mo. Uniform (made from one wire material) as well as combined (made from two wire materials with almost equal wire masses) wire arrays were considered. Uniform, combined, symmetric and asymmetric X-pinches (some of which included a small fraction of tracer Al wires) were also considered. Non-LTE kinetic models to account for K- and L-shell radiation were employed to understand radiative properties of Z-pinch and X-pinch plasmas. Implosion characteristics of such loads are discussed using the wire dynamics and MHD models. Opacity effects of Z-pinch plasmas are studied and benefits of using alloyed and tracer wires are highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗