Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEXTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Surface Texturing Investigated for a High Solar Absorptance Low Infrared Emittance Solar Collector

The objective of this work was to design, build, and vacuum test a high solar absorptance, low infrared emittance solar collector for heat engine and thermal switching applications. Mini-satellites proposed by the Applied Physics Laboratory for operation in environments that are subject to radiation threat may utilize a heat engine for power and a thermal bus for thermal control. To achieve this goal, a surface having high solar absorptance and low infrared emittance is needed. At the NASA Glenn Research Center, one concept being pursued to achieve this goal is texturing high thermal conductivity graphite epoxy composites using a directed atomic oxygen beam and then coating the textured surface with a reflective metallic coating. Coupons were successfully textured, coated, and evaluated. A variety of texturing conditions were explored, and textures were documented by scanning electron microscopy. Copper, gold, silver, iridium, and aluminum coatings were applied, and the highest solar absorptance to infrared emittance ratio was found to be 1.3. A full-sized solar collector was manufactured with this ratio, and the amount of heat collected was observed using an Inconel calorimeter installed in a bench-top vacuum chamber equipped with a solar simulator. Results to date indicate good heat flow through the system, with 9 W of heat flow measured by the calorimeter.

Jaworske, Donald A.↗
DOE OSTI2024

Topological Spin Textures in an Insulating van der Waals Ferromagnet

Generation and control of topological spin textures constitutes one of the most exciting challenges of modern spintronics given their potential applications in information storage technologies. Of particular interest are magnetic insulators, which due to low damping, absence of Joule heating and reduced dissipation can provide energy-efficient spin-textures platform. Here, it is demonstrated that the interplay between sample thickness, external magnetic fields, and optical excitations can generate a prolific paramount of spin textures, and their coexistence in insulating CrBr 3 van der Waals (vdW) ferromagnets. Using high-resolution magnetic force microscopy and large-scale micromagnetic simulation methods, the existence of a large region in T-B phase diagram is demonstrated where different stripe domains, skyrmion crystals, and magnetic domains exist and can be intrinsically selected or transformed to each-other via a phase-switch mechanism. Lorentz transmission electron microscopy unveils the mixed chirality of the magnetic textures that are of Bloch-type at given conditions but can be further manipulated into Néel-type or hybrid-type via thickness-engineering. The topological phase transformation between the different magnetic objects can be further inspected by standard photoluminescence optical probes resolved by circular polarization indicative of an existence of exciton-skyrmion coupling mechanism. The findings identify vdW magnetic insulators as a promising framework of materials for the manipulation and generation of highly ordered skyrmion lattices relevant for device integration at the atomic level.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of Topological Spin Textures in Ferrimagnetic Mn 2 − x Zn x Sb

Ferrimagnets, which have both ferromagnetic and antiferromagnetic coupling, are attracting increased attention in the realm of spintronic devices due to advantages such as ultrafast dynamics and a suppressed skyrmion Hall effect. Thus, understanding the behavior of nontrivial spin textures in ferrimagnets is crucial; however, comprehensive reports on this topic remain limited. Here, the magnetic spin textures of ferrimagnetic Mn 2 − x Zn x Sb (x = 0.85) is explored as a function of temperature and applied magnetic field. The spin textures can be tuned to a variety of states, including stripes, skyrmion bags, and a skyrmion lattice. Chiral Néel-type magnetic structures are visualized using Lorentz transmission electron microscopy. Mn(I) ions are slightly shifted toward the Sb sites, which may be due to a strong electrostatic interaction between Mn and Sb ions. This local structural distortion breaks the inversion symmetry and introduces an effective Dzyaloshinkii–Moriya interaction. This work thus provides a pathway to use doping and heterogeneity in a ferrimagnet to control and generate chiral nontrivial spin textures.

Mn ion displacement↗
DOE OSTI2019

Textural analysis on contrast-enhanced CT in pancreatic neuroendocrine neoplasms: association with WHO grade

Purpose: Grades of pancreatic neuroendocrine neoplasms (PNENs) are associated with the choice of treatment strategies. Texture analysis has been used in tumor diagnosis and staging evaluation. In this study, we aim to evaluate the potential ability of texture parameters in differentiation of PNENs grades. Materials and methods: 37 patients with histologically proven PNENs and underwent pretreatment dynamic contrast-enhanced computed tomography examinations were retrospectively analyzed. Imaging features and texture features at contrast-enhanced images were evaluated. Receiver operating characteristic curves were used to determine the cut-off values and the sensitivity and specificity of prediction. Results: There were significant differences in tumor margin, pancreatic duct dilatation, lymph nodes invasion, size, portal enhancement ratio (PER), arterial enhancement ratio (AER), mean grey-level intensity, kurtosis, entropy, and uniformity among G1, G2, and pancreatic neuroendocrine carcinoma (PNEC) G3 (p < 0.01). Similar results were found between pancreatic neuroendocrine tumors (PNETs) G1/G2 and PNEC G3. AER and PER showed the best sensitivity (0.86–0.94) and specificity (0.92–1.0) for differentiating PNEC G3 from PNETs G1/G2. Mean grey-level intensity, entropy, and uniformity also showed acceptable sensitivity (0.73–0.91) and specificity (0.85–1.0). Mean grey-level intensity was also showed acceptable sensitivity (91% to 100%) and specificity (82% to 91%) in differentiating PNET G1 from PNET G2. Conclusions: Our data indicated that texture parameters have potential in grading PNENs, in particular in differentiating PNEC G3 from PNETs G1/G2.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2018

Assessment of Therapy Response to Transarterial Radioembolization for Liver Metastases by Means of Post-treatment MRI-Based Texture Analysis

IntroductionTo determine whether post-treatment magnetic resonance imaging (MRI)-based texture analysis of liver metastases (LM) may be suited predicting therapy response to transarterial radioembolization (TARE) during follow-up.Materials and MethodsThirty-seven patients with LM treated by TARE (mean age 63.4 years) between January 2006 and December 2014 were identified in this retrospective feasibility study. They underwent dynamic contrast-enhanced and hepatocellular phase MRI after TARE (mean 2.2 days). Response was evaluated on follow-up imaging scheduled in intervals of 3 months (median follow-up, 7.3 months) based on response evaluation criteria in solid tumors 1.1 (RECIST 1.1). Results of texture analysis [mean, standard deviation, skewness (s), kurtosis (k), entropy and uniformity] were compared between patients with progressive disease (PD) and patients with stable disease (SD), partial or complete response (PR/CR). Receiver operating characteristics including the area under the curve (AUC) and cutoff values including the sensitivity and specificity were calculated.ResultsAccording to RECIST 1.1, 24 patients (64.9%) had PD, 8 SD (21.6%) and 5 PR (13.5%). MRI-based texture analysis showed an earlier differentiation between patients with and without PD when compared with RECIST 1.1. Median k (2.88 vs. 2.35) in arterial phase MRI and median s (0.48 vs. 0.25) and k (2.85 vs. 2.25) in venous phase MRI were significantly different (p < 0.05). The AUC for k derived from arterial phase MRI was 0.73 (cutoff = 2.55, sensitivity = 0.83, specificity = 0.62) (p < 0.05). The AUC for s and k in venous phase MRI was 0.76 (cutoff = 0.35, sensitivity = 0.71, specificity = 0.85) (p > 0.05) and 0.83 (cutoff = 2.50, sensitivity = 0.75, specificity = 0.85) (p < 0.05).ConclusionThis study indicates the potential of MRI-based texture analysis at arterial and venous phase MRI for the early prediction of PD after TARE. Level of Evidence: IV.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Shear-Coupled Grain Growth and Texture Development in a Nanocrystalline Ni-Fe Alloy during Cold Rolling

The evolution of texture, grain size, grain shape, dislocation and twin density has been determined by synchrotron X-ray diffraction and line profile analysis in a nanocrystalline Ni- Fe alloy after cold rolling along different directions related to the initial fiber and the long axis of grains. The texture evolution has been simulated by the Taylor-type relaxed constraints viscoplastic polycrystal model. The simulations were based on the activity of partial dislocations in correlation with the experimental results of dislocation density determination. The concept of stress-induced shear-coupling is supported and strengthened by both the texture simulations and the experimentally determined evolution of the microstructure parameters. Grain-growth and texture evolution are shown to proceed by the shear-coupling mechanism supported by dislocation activity as long as the grain size is not smaller than about 20 nm.

Dislocation mechanism of grain growth↗
DOE OSTI2018

Surface Texturing of Polyimide Composite by Micro-Ultrasonic Machining

In this study, micro-dimples were prepared on a polyimide composite surface to obtain the dual benefits of polymer materials and surface texture. Micro-ultrasonic machining is employed for the first time for micro-dimple fabrication on polyimide composite surfaces. Surface textures of simple patterns were fabricated successfully with dimple depths of 150 μm, side lengths of 225-425 μm, and area ratios of 10-30%. The friction coefficient of the micro-dimple surfaces with side lengths of 325 or 425 μm could be increased by up to 100% of that of non-textured surfaces, alongside a significant enhancement of wear resistance. The results show that surface texturing of polyimide composite can be applied successfully to increase the friction coefficient and reduce wear, thereby contributing to a large output torque.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A Review of Texture Evolution Mechanisms During Deformation by Rolling in Aluminum Alloys

The current understanding of texture evolution during deformation by rolling in aluminum alloys was summarized. This included understanding the evolution mechanisms and several key factors of initial texture, microstructure, alloy composition, deformation temperature, stress–strain condition, and rolling geometry. Related models on predicting texture evolution during rolling were also discussed. Finally, for this research field, the recommendations for controlling the formation of rolling textures were proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The Effect of Chemical Composition and Processing Technology on the Microstructure, Texture and Earing Behavior of DR Tinplate

The influence of alloying elements and processing technology on the microstructure, crystallographic texture and earing propensity has been investigated in two kinds of DR tinplate differing in Ti content: steel A, no Ti addition, and steel B 0.015% added. The cementite distribution, second-phase particles and the content of dissolved carbon and nitrogen atoms were obtained by SEM, TEM and XPS, respectively. Since the two steels develop both a partial 〈110〉//RD fiber and a {111}//ND fiber, the relative intensities of the several vital texture components seem to differ visibly. There are three types of strengthening mechanisms involved here: strengthening by grain size reduction, solution strengthening and strain hardening. That the tensile strength of steel B is greater than A implies the third mode plays a dominant role in the strength increasing for the DR tinplate. The crystallographic texture of materials not only results in a “preferential orientation” of the mechanical property, but also takes the primary responsibility for ears forming during drawing. Increasing the second cold-rolled reduction is not favorable to reduce the ear height, but this situation seems to be ameliorable. The average ears height of steel B is smaller than that of A, which demonstrated a low level of solute atoms and an ideal texture characteristic before deformation could alleviate the adverse effect caused by an elevated second cold reduction.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding

We report that it was recently demonstrated that bulk two-phase 50/50 Zr–Nb nanolayered composites with 90 nm individual layers can be fabricated from an initial coarse-layered composite with 1 mm layers via the severe plastic deformation process of accumulative roll bonding. During the deformation, the Zr phase retained its hcp crystal structure and the Zr–Nb interface remained sharp. Here we use a combination of neutron diffraction and dislocation-based polycrystal plasticity constitutive modeling to assess the evolution of texture and deformation mechanisms over a four order-of-magnitude range in layer thickness. The phase textures in the nanocomposite strongly deviate from that of Zr or Nb rolled in monolithic form, becoming highly peaked and intense. The model suggests that texture development in the Nb phase is associated with multiple slip and contributions from both {1 1 2} <1 1 0> slip and {1 1 0} <1 1 0> slip. Lastly, in the Zr phase the model suggests that the texture develops due to a predominance of prismatic and basal slip.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Texture evolution and microcracking mechanisms in as-extruded and cross-rolled conditions of a 14YWT nanostructured ferritic alloy

Cr-stabilized nanostructured ferritic alloys (NFAs), dispersion strengthened by an ultra-high density of nanooxides, are attractive candidates for many nuclear energy applications due to their high-temperature strength, in-service stability and remarkable irradiation tolerance. However, typical NFA deformation processing paths lead to crystallographic texturing, formation of brittle microstructures and low toughness orientations, making fabricating components very difficult. In this paper, we characterize the dislocation-mediated deformation mechanisms that lead to the brittle texture component. The as-extruded bar is less brittle than the cross-rolled plate, which contains a large population of pre-existing cleavage microcracks. More generally, deformed ODS/NFAs are most often textured and have anisotropic low toughness orientations, even absent microcracks. However, cross-rolling produces a very high volume fraction of a plate normal {001}<110>-texture component, which constitutes the brittle cleavage system in iron. Finally, microcracks propagate along {001} low angle deformation induced subgrain boundaries in <110> directions after nucleating by the Cottrell mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Analysis of textural properties of CaO-based CO 2 sorbents by ex-situ USAXS

Here in this work, the micro-textural properties of CaO-based CO 2 sorbents prepared in a thermo-gravimetric reactor were investigated by ex situ synchrotron-based Small Angle X-ray Scattering (SAXS), Ultra Small Angle X-ray Scattering (USAXS) and Wide Angle X-ray Scattering (WAXS). Six sorbent samples were produced by calcination in vacuum at different temperatures and durations of the heating step; additionally, four partially carbonated samples were produced, after calcination in vacuum, at different CaO conversions. The scattering intensity profiles were analyzed by means of the Unified Fit model. Bimodal pore size distributions (micro-pores and meso-pores) were identified and the micro-textural properties (porosity, specific surface and pore radius of gyration) of each of the two pore populations were quantified both for the calcined and for the carbonated samples. The micro-textural properties of a few calcined samples were compared with N 2 -adsorption measurements. For each pore population, the trends of porosity, specific surface and pore radius of gyration, in addition to the pore number density and sphericity factor, were obtained versus time during the calcination and versus the CaO conversion during the carbonation. The relevance of micro-pores with respect to macro-pores was assessed both as far as the porosity impact on the CO 2 capture capacity and as far as the specific surface impact on the carbonation kinetics. For the calcined samples, the micro-textural properties of a partially calcined sample were compared with those of the completely calcined samples, and pore correlation distances were determined. Finally, for the carbonated samples, the specific surface per unit of particle volume results linearly dependent on the CaO conversion and, if expressed per unit of mass of unreacted CaO, does not change significantly for most of the CaO carbonation.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Texture evolution and their effects on the mechanical properties of duplex Mg-Li alloy

Texture evolution is strongly dependent on the deformation mode during thermo-mechanical treatments. In this paper, we report the texture evolution in a duplex Mg-Li alloy. The results provide an evidence of deformation mode transition in the hexagonal-close-packed (hcp) alpha phase with various thickness reductions. The activation sequence of deformation modes is basal slip first, and then pyramidal slip during hot-rolling to a thickness reduction of 40%. The relative activity of slip decreases with further thickness reduction. After annealing, basal texture is strengthened and pyramidal component disappears due to static recrystallization and grain growth. The microstructure, specifically texture evolution in both hcp alpha and body-centered cubic (bcc) beta phase and their effects on mechanical properties are quantitatively analyzed and assessed. (C) 2016 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Effect of deformation path on microstructure, microhardness and texture evolution of interstitial free steel fabricated by differential speed rolling

This paper reports the effect of the deformation path on the microstructure, microhardness, and texture evolution of interstitial free (IF) steel processed by differential speed rolling (DSR) method. For this purpose, total height reductions of 50% and 75% were imposed on the samples by a series of differential speed rolling operations with various height reductions per pass (deformation levels) ranging from 10 to 50% under a fixed roll speed ratio of 1:4 for the upper and lower rolls, respectively. Microstructural observations using transmission electron microscopy and electron backscattered diffraction measurements showed that the samples rolled at deformation level of 50% had the finest mean grain size (∼ 0.5 μm) compared to the other counterparts; also the samples rolled at deformation level of 50% showed a more uniform microstructure. Based on the microhardness measurements along the thickness direction of the deformed samples, gradual evolution of the microhardness value and its homogeneity was observed with the increase of the deformation level per pass. Texture analysis showed that, as the deformation level per pass increased, the fraction of alpha fiber and gamma fiber in the deformed samples increased. The textures obtained by the differential speed rolling process under the lubricated condition would be equivalent to those obtained by the conventional rolling. - Highlights: • Effect of DSR deformation path on microstructure of IF steel is significant. • IF steel rolled at deformation level of 50% has the ultrafine grains of ∼ 0.5 μm. • Rolling texture components are pronounced with increasing deformation level.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion

Aluminum multi-port extrusion tube is processed by the porthole die extrusion and the internal tube walls are welded through the solid state metallurgical bonding. In order to observe the development of grains and their orientations under severe plastic deformation and solid state welding, the extrusion butt together with the die is quenched immediately after extrusion to preserve the grain structure in the processing. The forming histories of selected material points are obtained by analyzing the optical microscopy graph. The evolution of the microstructure along the forming path is characterized by electro backscattered diffraction. It is found that geometrical dynamic recrystallization happens in the process. Grains are elongated, scattered at the transition zone and shear intensive zone, and then pinched off when they are pushed out from the die orifice. The shear-type orientations are predominant at the surface layer on the longitudinal section of the tube web and have penetrated into the intermediate layer. The rolling-type orientations are formed at the central layer. Texture gradient through the thickness of the tube web is observed. And cube orientated grains are found at the seam weld region. - Highlights: •Microstructure of extrusion butt is preserved after the micro scale porthole die extrusion. •Grain morphology history along forming path is investigated. •Texture evolutions on three material flows are present. •Texture gradient exists on the longitudinal section of the internal wall of profile. •Rolling-type and cube textures are found at the solid state welding region.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Characterization of texture and grain boundary character distributions of selective laser melted Inconel 625 alloy

Highlights: • <110> texture along layer build direction was generated in as-SLMed Inconel 625. • The stress relief process dominates texture and GBCD evolution. • SLMed IN 625 alloy can be GBEed via suitable post annealing. - Abstract: Select laser melting (SLM) is one of the practical metal additive manufacturing processes to fabricate complex structures. The inhomogeneous microstructure and high residual stress are typically resulted from a non-uniform melting and rapid solidification during a SLM process, which has the significant impact on part dimensional instability, corrosion resistance, and mechanical properties. The bulk of current research is limited to the general characterization of grain size, texture, and mechanical properties. However, grain boundary character distribution (GBCD) and its relationship with texture are yet to be understood. This study has shown that the preferred <110> along building direction and <100> along laser scanning direction were produced. The high density of low angle grain boundary (LAGB) can be an indicator of residual stress levels in the as-SLMed samples. The newly-developed ∑3, ∑9 and ∑27 grain boundaries were heavily populated, and the cluster of grains interfaced by ∑3{sup n} (n = 0, 1, 2…) was introduced at the expense of LAGB only at high recrystallization annealing (1150°C or over). The research results suggest that GBCD optimization be possible in the SLMed Inconel 625 alloy via suitable post annealing, which allows improving intergranular corrosion resistance and enhancing mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Investigation of annealing temperature on microstructure and texture of Fe-19Cr-2Mo-Nb-Ti ferritic stainless steel

Highlights: • Fe-19Cr-2Mo-Nb-Ti ferritic stainless steel was investigated. • Shear bands provided recrystallization nucleation sites. • Annealing temperature can affect microstructure and texture. • r-bar increased to a maximum value (1.69) and then decreased to 1.42. - Abstract: The evolution of microstructure and texture of Fe-19Cr-2Mo-Nb-Ti ferritic stainless steel annealed at different temperatures was investigated using a combination of X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). EBSD investigations confirm that the in-grain shear bands provide more recrystallization nucleation sites to γ-fiber recrystallization grains with high Taylor factor orientations during cold rolling requiring further annealing for a more homogenous equiaxied grain structure. As the annealing temperatures increase, the grains in center layer are oriented towards {110}∥ND, and the recrystallization grains at 1050 °C are dominated by the uniform and equiaxial γ-fiber grains favourable for the improvement of r-values, while the occurrence of {100} <011> texture detrimental to r-values indicates that an exorbitant annealing temperature can reduce the intensity of γ-fiber textures affecting the formability, accordingly, the average plastic strain ratio of ferritic stainless steel increases sharply up to a maximum value (1.69) and then decreases to a certain value (1.42).

36 MATERIALS SCIENCE↗