Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “System Dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Graph Learning in Physical-informed Mesh-reduced Space for Real-world Dynamic Systems

This Git repository contains codes for the 'Graph Learning in Physical-informed Mesh-reduced Space for Real-world Dynamic Systems' paper that will be published in 2023 SIGKDD. This work uses physical-informed prior (PiP) information to learn and predict fluid dynamics in a reduced mesh space. We propose a two-stage graph-based model for fluid velocity field reconstruction and prediction. In the first stage, we learn a subgraph autoencoder to summarize the information in a mesh-reduced space using physical-informed priors. In the second stage, we learn a dynamics predictor to predict subgraph evolution. We demonstrate the effectiveness of our model on two fluid flow datasets: lid-driven cavity flow data and cylinder flow data. This code is also applicable for any other dynamic systems with corresponding data.

Lei, Bo↗

Data-driven Identification and Prediction of Power System Dynamics Using Linear Operators

In this paper, we propose linear operator theoretic framework involving Koopman operator for the data-driven identification of power system dynamics. We explicitly account for noise in the time series measurement data and propose robust approach for data-driven approximation of Koopman operator for the identification of nonlinear power system dynamics. The identified model is used for the prediction of state trajectories in the power system. The application of the framework is illustrated using an IEEE nine bus test system.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Extensions to Dynamic System Simulation of Fissile Solution Systems

Previous reports have documented the results of applying dynamic system simulation (DSS) techniques to model a variety of fissile solution systems. The SUPO (Super Power) aqueous homogeneous reactor (AHR) was chosen as the benchmark for comparison of model results to experimental data for steadystate operation.1 Subsequently, DSS was applied to additional AHR to verify results obtained for SUPO and extend modeling to prompt critical excursions, ramp reactivity insertions of various magnitudes and rate, and boiling operations in SILENE and KEWB (Kinetic Experiment Water Boiler).2 Additional models for pressurized cores (HRE: Homogeneous Reactor Experiment), annular core geometries, and accelerator-driven subcritical systems (ADAHR) were developed and results reported.3 The focus of each of these models is core dynamics; neutron kinetics, thermal hydraulics, radiolytic gas generation and transport are coupled to examine the time-based evolution of these systems from start-up through transition to steady-state. A common characteristic of these models is the assumption that (a) core cooling system inlet temperature and flow and (b) plenum gas inlet pressure and flow are held constant; no external (to core) component operations that may result in dynamic change to these parameters are considered. This report discusses extension of models to include explicit reference to cooling structures and radiolytic gas handling. The accelerator-driven subcritical generic system model described in References 3 and 4 is used as a basis for this extension.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Utilizing CellBox to Describe Varied Dynamical Systems

CellBox is a hybrid modeling framework that integrates machine-learning approaches with explicit mathematical modeling to determine the behavior of dynamical systems, intended for determining the complex interactions of molecule and phenotype within a cellular environment using perturbation/response-based data. The original work utilized analysis of a melanoma cell line, SK-Mel-133, which we sought to expand to and evaluate effectiveness in describing other nonlinear systems both within and outside of biology. We evaluated with two models. One model is based upon the free-fall of an object under a velocity-dependent drag force; this produced inherent perturbation/response data. The other model is based upon a form of mass-action molecular kinetics; for this, we ran the simulation to steady state in each species for each perturbation and select the steady state as input for CellBox. We determined that CellBox, outside of its original use case, can still strongly predict even non-biological dynamical systems in the small-perturbation regime, with r = 0.99977 to 0.85123, p < 0.05 for freefall. However, CellBox cannot accurately predict behavior within large-perturbation regimes, p >> 0.05 for freefall. In addition, we performed a naïve comparison of CellBox network structure to known network structure in the mass-action model to assess accuracy.

97 MATHEMATICS AND COMPUTING↗

Nested observer for linear hybrid dynamical systems

The synthesis of observers for linear hybrid dynamical systems ''HDS,'' is significant from the point of view of the applications (control, diagnoses...); it is still, largely open. We proposed a new approach inspired from a new method of identification, where we could obtain better results with respect to discrimination between the discrete states in conflicts and time necessary to this latter. The results of the suggested technique proved to be satisfactory.

97 MATHEMATICS AND COMPUTING↗

Reachable sets for linear dynamical systems.

The properties of reachable sets for linear dynamical systems for specified control sets are discussed. Iterative procedures for determining numerical approximations of the reachable set are suggested and methods of obtaining an admissible control function which transfers an initial state to as near a prescribed target as possible is described. The problem of reachability with multiple control constraints is discussed and certain aspects of reachability for time-invariant systems with adjustable parameters is considered.

Pecsvaradi, T.↗

Uncertain dynamical systems: A differential game approach

A class of dynamical systems in a conflict situation is formulated and discussed, and the formulation is applied to the study of an important class of systems in the presence of uncertainty. The uncertainty is deterministic and the only assumption is that its value belongs to a known compact set. Asymptotic stability is fully discussed with application to variable structure and model reference control systems.

Gutman, S.↗

Simulating ensembles of nonlinear continuous time dynamical systems via active ultra wideband wireless network

The paper deals with a new multi-element processor platform assigned for modelling the behaviour of interacting dynamical systems, i.e., active wireless network. Experimentally, this ensemble is implemented in an active network, the active nodes of which include direct chaotic transceivers and special actuator boards containing microcontrollers for modelling the dynamical systems and an information display unit (colored LEDs). The modelling technique and experimental results are described and analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of dynamic systems with DAP4H computer program

Dynamic Analysis Program, FORTRAN 4 Level H /DAP4H/, developed from 27 subprograms, features liberal use of the subroutines, subprograms, and skeletonization to minimize programming effort in formulating models of new systems and components. It formulates mathematical models of complex mechanical, pneumatic, and hydraulic dynamic systems.

Absalom, J. G.↗

Optimal mitigation and control over power system dynamics for stochastic grid resilience

Optimal mitigation planning for highly disruptive contingencies to a transmission-level power system requires optimization with dynamic power system constraints, due to the key role of dynamics in system stability to major perturbations. We formulate a generalized disjunctive program to determine optimal grid component hardening choices for protecting against major failures, with differential algebraic constraints representing system dynamics (specifically, differential equations representing generator and load behavior and algebraic equations representing instantaneous power balance over the transmission system). We optionally allow stochastic optimal pre-positioning across all considered failure scenarios, and optimal emergency control within each scenario. This novel formulation allows, for the first time, analyzing the resilience interdependencies of mitigation planning, preventive control, and emergency control. Using all three strategies in concert is particularly effective at maintaining robust power system operation under severe contingencies, as we demonstrate on the western system coordinating council 9-bus test system using synthetic multi-device outage scenarios.

30 DIRECT ENERGY CONVERSION↗

A multi-scale temperature-based strategy to map hydrologic exchange flows in highly dynamic systems

Mapping and quantifying hydrologic exchange flows (HEFs) is critical to environmental monitoring and remediation at contaminated sites; however, these objectives are challenging in highly dynamic systems, e.g., along dam-regulated rivers, where HEFs vary rapidly. Direct seepage measurements are labor-intensive and difficult to automate, whereas indirect (e.g., thermal) and remote sensing methods have potential to allow continuous monitoring with limited field effort. We present a preliminary assessment of a multi-scale temperature-based strategy for monitoring HEFs along the Hanford Reach of the Columbia River, in eastern WA, United States. Five thermal methods were assessed. First, a vertical temperature profile (VTP) was installed into the streambed. The VTP data were analyzed using a data assimilation algorithm designed for automated real-time estimation in dynamic systems. Second, a thermal infrared (TIR) camera was used in roving surveys to identify seeps. Third, a TIR camera was stationed at the VTP site to collect images at 1-h intervals. Together, the two TIR datasets provided a basis to assess the potential for drone-based TIR. Fourth, temperature was measured at the sediment/water interface to assess fiber-optic distributed temperature sensing. Fifth, imagery from the ECOSTRESS satellite mission was acquired to assess the potential of spaceborne thermal monitoring. Based on our preliminary assessment, VTP, TIR, and bed temperature measurements provide complementary spatial coverage, temporal sampling, and resolution; these methods have potential for long-term, automated monitoring of HEFs. The publicly available spaceborne imagery, however, proved inadequate because of insufficient spatial resolution and data gaps resulting from cloud cover and revisit frequency.

54 ENVIRONMENTAL SCIENCES↗

Landsat Data Continuity Mission (LDCM) Flight Dynamics System (FDS)

The Landsat Data Continuity Mission (LDCM) will be launched in January 2013 to continue the legacy of Landsat land imagery collection that has been on-going for the past 40 years. While the overall mission and science goals are designed to produce the SAME data over the years, the ground systems designed to support the mission objectives have evolved immensely. The LDCM Flight Dynamics System (FDS) currently being tested and deployed for operations is highly automated and well integrated with the other ground system elements. The FDS encompasses the full suite of flight dynamics functional areas, including orbit and attitude determination and prediction, orbit and attitude maneuver planning and execution, and planning product generation. The integration of the orbit, attitude, maneuver, and products functions allows a very smooth flow for daily operations support with minimal input needed from the operator. The system also provides a valuable real-time component that monitors the on-board orbit and attitude during every ground contact and will autonomously alert the Flight Operations Team (FOT) personnel when any violations are found. This paper provides an overview of the LDCM Flight Dynamics System and a detailed description of how it is used to support space operations. For the first time on a Goddard Space Flight Center (GSFC)-managed mission, the ground attitude and orbits systems are fully integrated into a cohesive package. The executive engine of the FDS permits three levels of automation: low, medium, and high. The high-level, which will be the standard mode for LDCM, represents nearly lights-out operations. The paper provides an in-depth look at these processes within the FDS in support of LDCM in all mission phases.

Good, Susan M.↗

Numerical analysis for finite-range multitype stochastic contact financial market dynamic systems

In an attempt to reproduce and study the dynamics of financial markets, a random agent-based financial price model is developed and investigated by the finite-range multitype contact dynamic system, in which the interaction and dispersal of different types of investment attitudes in a stock market are imitated by viruses spreading. With different parameters of birth rates and finite-range, the normalized return series are simulated by Monte Carlo simulation method and numerical studied by power-law distribution analysis and autocorrelation analysis. To better understand the nonlinear dynamics of the return series, a q-order autocorrelation function and a multi-autocorrelation function are also defined in this work. The comparisons of statistical behaviors of return series from the agent-based model and the daily historical market returns of Shanghai Composite Index and Shenzhen Component Index indicate that the proposed model is a reasonable qualitative explanation for the price formation process of stock market systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

System dynamics for predicting the impact of traffic noise on cardiovascular mortality in Madrid

Highlights: • Short-term impact of traffic noise has changing patterns over time. • System dynamics models help understand the evolution of noise impact. • In Madrid, noise impact on mortality exhibits an epidemic behaviour since 1980. • Growing use of electric vehicles would stop the epidemic no sooner than 2040. • Major changes in urban life are needed to reduce noise impact in large cities. The impact of road traffic noise on health is an important issue worldwide. In Madrid (Spain), the existing high daily noise levels all year round have been associated with short-term cardiovascular mortality. A system dynamics model is constructed to estimate the evolution of the traffic noise impact on the population older than 65 in Madrid over the upcoming years. This strategy allows to make predictions based on yearly variations in traffic intensity, population at risk, motor vehicle-related technological advances and lifestyles, and urban planning policies. Madrid harbours a persisting noise epidemic since 1980, which would be eradicated in 2040 at the earliest if significant action for noise abatement were taken.

54 ENVIRONMENTAL SCIENCES↗