Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural phase transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Correlation of turbulent shear layer attachment peak heating near Mach 6

A correlation of new turbulent two-dimensional data and peak heating data for attaching free shear layers is presented for a 2.54-cm and 5.08-cm diam cylindrical leading-edge slab 25.4 cm long, and 7.62 and 10.16 cm wide. A 30.48 x 25.4 cm sharp leading-edge flat plate set at 15 and 20 deg is used to generate plane impinging shocks. The freestream Mach number is 6 and the freestream Reynolds number varies from 3,300,000 to 25,600,000/m. Peak heating is measured on silica-based epoxy models with a phase change coating technique. A comparison of the free shear layer data with the transition data of Birch and Keyes (1972) reveals that the shear layer data are turbulent at attachment. The trend of the data shows that peak heating is strongly affected by the state of development at attachment. As the free shear layers become more fully developed, the data approach the two-dimensional correlation. Persistence of transitional flow structures for supersonic free shear flows is pointed out.

Keyes, J. W.↗

Doping directed at the oxygen sites in Y1Ba2Cu3O(7-delta) - The effect of sulfur, fluorine, and chlorine

The effect of three dopants directed at the oxygen sites in Y1Ba2Cu3O(7-delta) have been investigated: sulfur, fluorine, and chlorine. Single-phase material has been obtained up to a (nominal) replacement of about 1 percent of the oxygen. Although the lattice parameters are unchanged, all dopants raise Tc (very slightly), sharpen the resistive transition, reduce the normal state resistivity, and very substantially increase the (magnetically determined) fraction of the material that is superconducting. All of these results differ qualitatively from those obtained with dopants directed at other locations in the 123 structure, and it is suggested that small additions of sulfur, fluorine, or chlorine may help to stabilize the ideal 123 stoichiometry.

Bansal, N. P.↗

Exoplanet Transit Spectroscopy Using WFC3: WASP-12b, WASP-17b, and WASP-19b

We report an analysis of transit spectroscopy of the extrasolar planets WASP-12 b, WASP-17 b, and WASP-19 b using the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST). We analyze the data for a single transit for each planet using a strategy similar, in certain aspects, to the techniques used by Berta et al., but we extend their methodology to allow us to correct for channel- or wavelength-dependent instrumental effects by utilizing the band-integrated time series and measurements of the drift of the spectrum on the detector over time. We achieve almost photon-limited results for individual spectral bins, but the uncertainties in the transit depth for the band-integrated data are exacerbated by the uneven sampling of the light curve imposed by the orbital phasing of HST's observations. Our final transit spectra for all three objects are consistent with the presence of a broad absorption feature at 1.4 microns most likely due to water. However, the amplitude of the absorption is less than that expected based on previous observations with Spitzer, possibly due to hazes absorbing in the NIR or non-solar compositions. The degeneracy of models with different compositions and temperature structures combined with the low amplitude of any features in the data preclude our ability to place unambiguous constraints on the atmospheric composition without additional observations with WFC3 to improve the signal-to-noise ratio and/or a comprehensive multi-wavelength analysis. Key words: planetary systems - techniques: photometric - techniques: spectroscopic

HST↗

Crystallization and properties of Sr-Ba aluminosilicate glass-ceramic matrices

Powders of roller quenched (Sr,Ba)O-Al2O3-2SiO2 glasses of various compositions were uniaxially pressed into bars and hot isostatically pressed at 1350 C for 4 hours or cold isostatically pressed and sintered at different temperatures between 800 to 1500 C for 10 or 20 hours. Densities, flexural strengths, and linear thermal expansion were measured for three compositions. The glasss transition and crystallization temperatures were determined by Differential Scanning Calorimetry (DSC). The liquidus and crystallization temperature from the melt were measured using high temperature Differential Thermal Analysis (DTA). Crystalline phases formed on heat treatment of the glasses were identified by powder x ray diffraction. In Sr containing glasses, the monoclinic celsian phase always crystallized at temperatures above 1000 C. At lower temperatures, the hexagonal analog formed. The temperature for orthorhombic to hexagonal structure transformation increased monotonically with SrO content, from 327 C for BaO-Al2O3-2SiO2 to 758 C for SrO-Al2O3-2SiO2. These glass powders can be sintered to almost full densities and monoclinic celsian phase at a relatively low temperature of 1100 C.

Bansal, Narottam P.↗

Active turbulence control in wallbounded flow using direct numerical simulations

An exploratory study of concepts for active control of turbulent boundary layers using the direct numerical simulation technique was performed. Significant drag reduction was achieved when the surface boundary condition was modified such that it could suppress the large-scale structures present in the wall region. This was achieved by prescribing the normal component of velocity at the wall to be 180 deg out of phase with the normal velocity slightly above the wall at each instant. The drag reduction was accompanied with significant reduction in the intensity of the wall-layer structures and reductions in the magnitude of Reynolds stresses throughout the flow. Suitability of wall-pressure and shear-stress fluctuations for detection of flow structures above the wall was examined. A preliminary result obtained by applying the present control strategy to a transitional flow is also briefly described, from which one can infer a possible linkage between the control strategy and flow stability.

Kim, J.↗

Crystallization and properties of Sr-Ba aluminosilicate glass-ceramic matrices

Powders of roller quenched (Sr,Ba)O-Al2O3-2SiO2 glasses of various compositions were uniaxially pressed into bars and hot isostatically pressed at 1350 C for 4 hours or cold isostatically pressed and sintered at different temperatures between 800 to 1500 C for 10 or 20 hours. Densities, flexural strengths, and linear thermal expansion were measured for three compositions. The glass transition and crystallization temperatures were determined by Differential Scanning Calorimetry (DSC). The liquidus and crystallization temperature from the melt were measured using high temperature Differential Thermal Analysis (DTA). Crystalline phases formed on heat treatment of the glasses were identified by powder X ray diffraction. In Sr containing glasses, the monoclinic celsian phase always crystallized at temperatures above 1000 C. At lower temperatures, the hexagonal analog formed. The temperature for orthorhombic to hexagonal structural transformation increased monotonically with SrO content, from 327 C for BaO-Al2O3-2SiO2 to 758 C for SrO-Al2O3-2SiO2. These glass powders can be sintered to almost full densities and monoclinic celsian phase at a relatively low temperature of 1100 C.

Bansal, Narottam P.↗

Exoplanet Transit Spectroscopy Using WFC3: WASP-12 b, WASP-17 b, and WASP-19 b

We report an analysis of transit spectroscopy of the extrasolar planets WASP-12 b, WASP-17 b, and WASP-19 b using the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST). We analyze the data for a single transit for each planet using a strategy similar, in certain aspects, to the techniques used by Berta et al., but we extend their methodology to allow us to correct for channel- or wavelength-dependent instrumental effects by utilizing the band-integrated time series and measurements of the drift of the spectrum on the detector over time. We achieve almost photon-limited results for individual spectral bins, but the uncertainties in the transit depth for the band-integrated data are exacerbated by the uneven sampling of the light curve imposed by the orbital phasing of HST's observations. Our final transit spectra for all three objects are consistent with the presence of a broad absorption feature at 1.4 nano meter most likely due to water. However, the amplitude of the absorption is less than that expected based on previous observations with Spitzer, possibly due to hazes absorbing in the NIR or non-solar compositions. The degeneracy of models with different compositions and temperature structures combined with the low amplitude of any features in the data preclude our ability to place unambiguous constraints on the atmospheric composition without additional observations with WFC3 to improve the signal-to-noise ratio and/or a comprehensive multi-wavelength analysis.

Atmospheres↗

A nonlinear structural concept for compliant walls

Two mechanisms of drag reduction for flow over flat plates were investigated. The first mechanism employs Bushnell's hypothesis that compliant walls produce drag reduction by interfering with the formation of the turbulent spots in a turbulent boundary layer. It is shown that the amplitudes and frequencies of compliant wall motions for drag reduction might be achieved by using slightly curved walls and the resulting large amplitude motions of snap buckling. A simple structural model of an arch is used in the analysis, and an asymptotic method is developed. The required wall motions can be obtained by using materials like mylar. In addition, the delay of transition from laminar to turbulent flow by driven walls was studied for Poiseuille channel flow. The walls are driven by a periodic traveling wave. A significant increase in the transitional Reynolds number is obtained by appropriately prescibing the wavelength and phase velocity of the wall motion. Previously developed asymptotic methods are used in the analysis.

Reiss, E. L.↗

A nonlinear structural concept for drag-reducing compliant walls

Two mechanisms of drag reduction for flow over flat plates were investigated. The first mechanism employs Bushnell's hypothesis that compliant walls produce drag reduction by interfering with the formation of the turbulent spots in a turbulent boundary layer. It is shown that the amplitudes and frequencies of compliant wall motions for drag reduction might be achieved by using slightly curved walls and the resulting large amplitude motions of snap buckling. A simple structural model of an arch is used in the analysis, and an asymptotic method is developed. The required wall motions can be obtained by using materials like mylar. In addition, the delay of transition from laminar to turbulent flow by driven walls was studied for Poiseuille channel flow. The walls are driven by a periodic traveling wave. A significant increase in the transitional Reynolds number is obtained by appropriately prescribing the wavelength and phase velocity of the wall motion. Previously developed asymptotic methods are used in the analysis. Previously announced in STAR as N83-11061

Reiss, E. L.↗

Detection of [SiLL] (34.8 micron) emission in Orion-KL: A measurement of the silicon abundance in dense interstellar gas

The first detection of the ground state fine structure transition of Si+ at a rest wavelength determined to be 34.815 + or - 0.004 micron are reported. These observations were obtained with the facility spectrometer on NASA's Kuiper Airborne Observatory. A 6' NW-SE strip scan across the Orion-KL region shows SiII emission from both the extended photodissociation region surrounding theta 1 Ori C and from the shocked gas NW of BN-KL. The inferred gas-phase silicon elemental abundance relative to hydrogen in the dense 10 to the 5/cc primarily neutral photodissociation region is approximately 2.6 x to the -6, a factor of 0.075 times the solar value and 3.4 times greater than the abundance in the moderate density approx. 10 to the 3/cc cloud toward zeta Oph. The silicon abundance in the shocked gas is approximately solar, indicating that any pre-existing grains have been destroyed in the shock wave or that the preshock gas carries a near solar abundance of gas phase silicon. The shock-excited SiII (34.8 micron) emission may arise from shocked wind material in the outflow around IRc2, with wind velocities approx. 100 km/s.

Haas, M. R.↗

Measurements of Unsteady Wake Interference Between Tandem Cylinders

A multi-phase, experimental study in the Basic Aerodynamics Research Tunnel at the NASA Langley Research Center has provided new insight into the unsteady flow interaction around cylinders in tandem arrangement. Phase 1 of the study characterized the mean and unsteady near-field flow around two cylinders of equal diameter using 2-D Particle Image Velocimetry (PIV) and hot-wire anemometry. These measurements were performed at a Reynolds number of 1.66 x 10(exp 5), based on cylinder diameter, and spacing-to-diameter ratios, L/D, of 1.435 and 3.7. The current phase, Phase 2, augments this dataset by characterizing the surface flow on the same configurations using steady and unsteady pressure measurements and surface flow visualization. Transition strips were applied to the front cylinder during both phases to produce a turbulent boundary layer upstream of the flow separation. For these flow conditions and L/D ratios, surface pressures on both the front and rear cylinders show the effects of L/D on flow symmetry, pressure recovery, and the location of flow separation and attachment. Mean streamlines and instantaneous vorticity obtained from the PIV data are used to explain the flow structure in the gap and near-wake regions and its relationship to the unsteady surface pressures. The combination of off-body and surface measurements provides a comprehensive dataset to develop and validate computational techniques for predicting the unsteady flow field at higher Reynolds numbers.

Jenkins, Luther N.↗

Detection of (Si II) (34.8 micron) emission in Orion-KL - A measurement of the silicon abundance in dense interstellar gas

The first detection of the ground state fine structure transition of Si+ at a rest wavelength determined to be 34.815 + or - 0.004 micron are reported. These observations were obtained with the facility spectrometer on NASA's Kuiper Airborne Observatory. A 6' NW-SE strip scan across the Orion-KL region shows Si II emission from both the extended photodissociation region surrounding theta 1 Ori C and from the shocked gas NW of BN-KL. The inferred gas-phase silicon elemental abundance relative to hydrogen in the dense 10 to the 5/cc primarily neutral photodissociation region is approximately 2.6 x 10 the -6, a factor of 0.075 times the solar value and 3.4 times greater than the abundance in the moderate density aprox. 10 to the 3/cc cloud toward Zeta Oph The silicon abundance in the shocked gas is approximately solar, indicating that any pre-existing grains have been destroyed in the shock wave or that the preshock gas carries a near solar abundance of gas phase silicon. The shock-excited Si II (34.8 micron) emission may arise from shocked wind material in the outflow around IRc2, with wind velocities approx. 100 km/s.

Haas, M. R.↗

Carbonate stability in the earth's mantle - A vibrational spectroscopic study of aragonite and dolomite at high pressures and temperatures

The structural changes of aragonite and dolomite taking place at high pressures and temperatures were investigated by measuring the Raman spectra of these materials to pressures of 23 and 28 GPa (generated in a diamond anvil cell), respectively; in addition, the IR spectra of aragonite were measured to 40 GPa. The spectroscopic data demonstrated that, at 300 K, dolomite and aragonite samples were stable to pressures of 28 and 41 GPa, respectively. No phase transitions were observed following heating of aragonite and dolomite to temperatures of 2000 K and 800 K, respectively. The mode Grueneisen parameters indicate that the carbonate group in these two minerals is relatively insensitive to pressure, with the dominant compaction mechanism being the compression of the Ca and Mg polyhedra.

Kraft, Susan↗

How NASA Accounts for Weather Throughout Artemis Mission

Development and operations of NASA spacecraft and launch vehicles are influenced by the natural environment (i.e. weather) across all applicable mission phases. Defining the natural environments provides engineers the applicable factors, along with exposure ranges, that must be accounted for in the hardware design. Effects from exposure to these environments must be addressed through structural design of the hardware, mitigated through operational controls, or accepted as risk by the governing program. Managing and mitigating these environmental factors was crucial to ensure the safe and successful launch of the Space Launch System (SLS) rocket, the transit of the Multi-Purpose Crew Vehicle (MPCV) around the moon and the recovery of MPCV after landing off the California coast in November 2022. A summary of how the Artemis I mission accounts for both the terrestrial and space environments, as well as the impacts, will be provided.

Ryan K Decker↗

Nonlinear development and secondary instability of large-amplitude Goertler vortices in hypersonic boundary layers

The weakly nonlinear development of large-amplitude Goertler vortices in a small neighborhood of the neutral stability position given by the linear theory is considered. It is shown that if the basic state and the wall curvature satisfy a certain condition, the Goertler vortices will grow until they become so large as to drive a mean flow correction as large as the basic state. Attention is then given to the further downstream evolution of these large-amplitude vortices, and it is shown that the vortices have a triple layer structure which consists of a region of vortex activity bounded by two transition layers over which the amplitude of the harmonic part of the vortex decays to zero exponentially. The positions of the two transition layers are found to be governed by a free boundary problem, which is solved for a number of curvature distribution cases. The secondary instability of the two transition layers is investigated with respect to traveling waves which are pi/2 out of phase in the spanwise direction with the steady Goertler vortices.

Fu, Y.↗

The interstellar medium in the starburst regions of NGC 253 and NGC 3256

We discuss observations of the (C II) 158 micrometers, (O I) 63 micrometers, (Si II) 35 micrometers, (O III) 52,88 micrometers, and (S III) 33 micrometers fine-structure transitions toward the central 45 seconds of the starburst galaxies NGC 253 and NGC 3256. The (C II) and (O I) emission probably originates in photodissociated gas at the surfaces of molecular clouds, although a small (less than or approximately 30%) contribution to the (C II) flux from H II regions cannot be ruled out. The (O III) and (S III) lines originate in H II regions and the (Si II) flux is best explained as originating in H II regions with some contribution from photodissociation regions (PDRs). The gas phase silicon abundance is nearly solar in NGC 253, which we interpret as evidence for grain destruction in the starburst region. We find that the photodissociated atomic gas has densities approximately 10(exp 4)/cu cm and temperature 200-300 K. About 2% of the gas is in this phase. The thermal gas pressure in the PDRs, P(PDR)/k approximately 1-3 x 10(exp 6) K/cu cm, might represent the 'typical' interstellar gas pressure in starburst systems. The Far Ultraviolet (FUV) radiation fields illuminating the clouds are 10(exp 3)-10(exp 4) stronger than the local Galactic FUV field and come from the contribution of many closely packed O and B stars. For the central 250 pc of NGC 253, we find that the H II gas has an average density n(sub e) is approximately 400/cu cm. This corresponds to a thermal pressure P(H II)/k approximately 7 x 10(exp 6) K/cu cm which is approximately P(PDR)/k, suggesting that the ionized gas is in pressure equilibrium with the photodissociated gas at the surfaces of molecular clouds. The H II gas fills a significant fraction, approximately 0.01-0.3, of the volume between the clouds. The effective temperature of the ionizing stars in NGC 253 is greater than or approximately 34,500 K; 2 x 10(exp 5) O7.5 stars would produce the observed Lyman countinuum photon luminosity. The average separation between the stars is approximately 3 pc. Applying the simple model for the interstellar medium in galactic nuclei of Wolfire, Tielens, & Hollenbach (1990), we find the molecular gas in the central regions of NGC 253 and NGC 3256 to be distributed in a large number (5 x 10(exp 3) to 5 x 10(exp 5)) of small (0.5-2 pc), dense (approximately 10(exp 4)/cu cm) clouds (or alternatively 'thin-flattened' structures) with volume filling factors 10(exp -3) to 10(exp -2), very different from the local Interstellar Medium (ISM) of the Galaxy. We suggest a self-consistent scenario for the ISM in NGC 253 in which clouds and H II gas are in pressure balance with a supernova-shocked, hot 1-3 x 10(exp 6) K, low-density (approximately 10(exp 4)/cu cm), all pervasive medium. A feedback mechanism may be indicated in which the pressure generated by the supernovae compresses the molecular clouds and triggers further massive star formation. The similarity of ISM parameters deduced for NGC 253, NGC 3256, and M82 (Lord et al. 1993) suggests that the ISM properties are independent of the luminosity of the starburst or the triggering mechanism, but are rather endemic to starburst systems. The starburst in NGC 3256 appears to be a scaled-up version of the NGC 253 and M82 starbursts.

Carral, P.↗

The geology and petrogenesis of the southern closepet granite

The Archaean Closepet Granite is a polyphase body intruding the Peninsular Gneiss Complex and the associated supracrustal rocks. The granite out-crop runs for nearly 500 km with an approximate width of 20 to 25 km and cut across the regional metamorphic structure passing from granulite facies in the South and green schist facies in the north. In the amphibolite-granulite facies transition zone the granite is intimately mixed with migmatites and charnockite. Field observations suggests that anatexis of Peninsular gneisses led to the formation of granite melt, and there is a space relationship between migmatite formation, charnockite development and production and emplacement of granite magma. Based on texture and cross cutting relationships four major granite phases are recognized: (1) Pyroxene bearing dark grey granite; (2) Porphyritec granite; (3) Equigranular grey granite; and (4) Equigranular pink granite. The granite is medium to coarse grained and exhibit hypidiomorphic granular to porphyritic texture. The modal composition varies from granite granodiorite to quartz monzonite. Geochemical variation of the granite suite is consistent with either fractional crystallization or partial melting, but in both the cases biotite plus feldspar must be involved as fractionating or residual phases during melting to account trace element chemistry. The trace element data has been plotted on discriminant diagrams, where majority of samples plot in volcanic arc and within plate, tectonic environments. The granite show distinct REE patterns with variable total REE content. The REE patterns and overall abundances suggests that the granite suite represents a product of partial melting of crustal source in which fractional crystallization operated in a limited number of cases.

Jayananda, M.↗

Gas-Phase Reaction Pathways and Rate Coefficients for the Dichlorosilane-Hydrogen and Trichlorosilane-Hydrogen Systems

As part of NASA Ames Research Center's Integrated Process Team on Device/Process Modeling and Nanotechnology our goal is to create/contribute to a gas-phase chemical database for use in modeling microelectronics devices. In particular, we use ab initio methods to determine chemical reaction pathways and to evaluate reaction rate coefficients. Our initial studies concern reactions involved in the dichlorosilane-hydrogen (SiCl2H2--H2) and trichlorosilane-hydrogen (SiCl2H-H2) systems. Reactant, saddle point (transition state), and product geometries and their vibrational harmonic frequencies are determined using the complete-active-space self-consistent-field (CASSCF) electronic structure method with the correlation consistent polarized valence double-zeta basis set (cc-pVDZ). Reaction pathways are constructed by following the imaginary frequency mode of the saddle point to both the reactant and product. Accurate energetics are determined using the singles and doubles coupled-cluster method that includes a perturbational estimate of the effects of connected triple excitations (CCSD(T)) extrapolated to the complete basis set limit. Using the data from the electronic structure calculations, reaction rate coefficients are obtained using conventional and variational transition state and RRKM theories.

Dateo, Christopher E.↗