Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Measurements of the unsteady flow field within the stator row of a transonic axial-flow fan. I - Measurement and analysis technique

This two-part paper presents laser anemometer measurements of the unsteady velocity field within the stator row of a transonic axial-flow fan. The objective is to provide additional insight into unsteady blade-row interactions within highspeed compressors which affect stage efficiency, energy transfer, and other design considerations. Part 1 describes the measurement and analysis techniques used for resolving the unsteady flow field features. The ensemble-average and variance of the measured velocities are used to identify the rotor wake generated and unresolved unsteadiness, respectively. (Rotor wake generated unsteadiness refers to the unsteadiness generated by the rotor wake velocity deficit and the term unresolved unsteadiness refers to all remaining contributions to unsteadiness such as vortex shedding, turbulence, mass flow fluctutions, etc.). A procedure for calculating auto and cross correlations of the rotor wake generated and unresolved unsteady velocity fluctuations is described. These unsteady-velocity correlations have significance since they also result from a decomposition of the Navier-Stokes equations. This decomposition of the Navier-Stokes equations resulting in the velocity correlations used to describe the unsteady velocity field will also be outlined in this paper.

Suder, K. L.↗
NASA NTRS1988

Rotor-stator interaction in a diffuser pump

Steady and unsteady pressure measurements were obtained on the diffuser vanes and the shroud wall of vaned and vaneless diffuser pumps in order to investigate the rotor-stator interaction. It is shown that the magnitude of the fluctuating lift is greater than the steady lift, and that the pressure fluctuations are larger on the suction side than on the pressure side. Pressure fluctuations near the shroud were much smaller than those near the hub across the span of the vane. Pressure fluctuations on the shroud wall itself were found to be larger for the vaned diffuser than for the vaneless diffuser.

Acosta, A. J.↗
NASA NTRS1986

Turbine stator flow field simulations

The increased capability and accessibility of modern computers, coupled with increasingly sophisticated and accurate numerical and physical modeling, has led to a marked impact of numerical simulations upon current turbine design and research problems. The turbine section represents a considerable challenge as it contains significant regions of complex three-dimensional flow, including both aerodynamic and heat transfer phenomena. The focus of the present effort is the development of an efficient and accurate three-dimensional Navier-Stokes calculation procedure for application to the turbine stator and rotor problems. In particular, an effective procedure is sought which: (1) adequately represents the flow physics, (2) allows for sufficient resolution in regions of small length scale, and (3) has sufficiently good convergence properties so as to allow use on a regular basis.

Buggeln, R. C.↗
NASA NTRS1989

Multi-blade Navier-Stokes simulations of rotor-stator interaction in a turbine stage

Turbulent flow fields of multiblade rotor/stator configurations in a turbine stage for the high pressure fuel side turbopump of the space shuttle main engine are obtained using a computer program that can simulate flows in a stage with an unequal number of rotor and stator blades. The calculations are performed on a system of multiple patched and overlaid grids using the unsteady, thin-layer Navier-Stokes equations in two-dimension. Aerodynamic performance of two rotor/stator configurations are studied and compared in the form of pressure contours, Mach number contours, time averaged surface pressure, and unsteady pressure amplitude. Spatial and temporal accuracy of flow calculations along with computation cost are evaluated for the purpose of engineering design applications.

Lin, S. J.↗
NASA NTRS1990

Rubbing Between Rotors And Stators

Report describes experimental and numerical-simulation studies of dynamical effects of rubbing between rotors and stators in turbomachinery. Purpose of study to gain improved understanding of such rubbing phenomena, with view toward: contributing to techniques for diagnosis of rubbing (e.g., via analysis of vibrations); predicting more accurately limiting operating conditions; and improving design criteria to prevent rubbing damage in high-performance rotating machinery.

Muszynska, Agnes↗
NASA NTRS1990

A kinematical/numerical analysis of rotor-stator interaction noise

In this study, the unsteady, thin-layer Navier-Stokes equations are solved using a system of patched grids for a rotor-stator configuration of an axial turbine. The study examines the plurality of spinning modes that are present in such an interaction. The propagation of these modes is analyzed and appropriate grid spacing chosen in the far upstream and downstream regions to attenuate reflections from the computational boundaries. In addition, radiating boundary conditions are implemented based on the farfield acoustical behavior of the flow field. Results in the form of pressure amplitudes and the spectra of turbine tones are presented. Numerical results and experimental data are compared wherever possible. The numerical results are also shown to conform with the predictions of a kinematical analysis of the flowfield.

Rangwalla, Akil A.↗
NASA NTRS1990

Experimental investigation of rotor-stator interaction in a centrifugal pump with several vaned diffusers

Steady and unsteady diffuser vane pressure measurements have been conducted with a two-dimensional test impeller, in an experimental investigation of rotor-stator interaction within a centrifugal pump having several vaned diffusers, under conditions of different flow coefficients and different radial gaps between the impeller blade trailing edge and the diffuser vane leading edge. The largest pressure fluctuations on the diffuser vanes and the impeller blades were found to be of the same order of magnitude as the total pressure rise across the pump. Increasing the number of diffuser vanes was found to result in a significant decrease of impeller blade pressure fluctuations.

Arndt, N.↗
NASA NTRS1989

Comparison of steady and unsteady secondary flows in a turbine stator cascade

The effect of periodic rotor wakes on the secondary flow structure in a turbine stator cascade was investigated. A mechanism simulated the wakes shed from rotor blades by passing cylindrical rods across the inlet to a linear cascade installed in a recirculating water flow loop. Velocity measurements showed a passage vortex, similar to that seen in steady flow, during the time associated with undisturbed fluid. However, as the rotor wake passed through the blade row, a large crossflow toward the suction surface was observed in the midspan region. This caused the development of two large areas of circulation between the midspan and endwall regions, significantly distorting and weakening the passage vortices.

Hebert, Gregory J.↗
NASA NTRS1990

Three-dimensional Euler time accurate simulations of fan rotor-stator interactions

A numerical method useful to describe unsteady 3-D flow fields within turbomachinery stages is presented. The method solves the compressible, time dependent, Euler conservation equations with a finite volume, flux splitting, total variation diminishing, approximately factored, implicit scheme. Multiblock composite gridding is used to partition the flow field into a specified arrangement of blocks with static and dynamic interfaces. The code is optimized to take full advantage of the processing power and speed of the Cray Y/MP supercomputer. The method is applied to the computation of the flow field within a single stage, axial flow fan, thus reproducing the unsteady 3-D rotor-stator interaction.

Boretti, A. A.↗
NASA NTRS1989

An unconditionally stable Runge-Kutta method for unsteady rotor-stator interaction

A quasi-three-dimensional analysis has been developed for unsteady rotor-stator interaction in turbomachinery. The analysis solves the unsteady Euler or thin-layer Navier-Stokes equations in a body-fitted coordinate system. It accounts for the effects of rotation, radius change, and stress-surface thickness. The Baldwin-Lomax eddy-viscosity model is used for turbulent flows. The equations are integrated in time using an explicit four-stage Runge-Kutta scheme with a constant time step. Implicit residual smoothing is used to increase the stability limit of the time-accurate computations. The scheme is described, and stability and accuracy analyses are given.

Chima, Rodrick V.↗
NASA NTRS1956

Component Performance Investigation of J71 Experimental Turbine I : Over-all Performance with 97-percent-design Stator Areas

The over-all component performance characteristics of a J71 experimental three-stage turbine with 97 percent design stator areas were determined over a range of speed and pressure ratio at inlet-air conditions of approximately 35 inches of mercury absolute and 700 degrees R. The turbine break internal efficiency at design operating conditions was 0.877; the maximum efficiency of 0.886 occurred at a pressure ratio of 4.0 at 120 percent of design equivalent rotor speed. In general, the turbine yielded a wide range of efficient operation, permitting flexibility in the choice of different modes of engine operation. Limiting blade loading of the third rotor was approached but not obtained over the range of conditions investigated herein. At the design operating point, the turbine equivalent weight flow was approximately 105 percent of design. Choking of the third-rotor blades occurred at design speed and an over-all pressure ratio of 4.2.

Schum, Harold J↗
NASA NTRS1993

A numerical analysis of tonal acoustics in rotor-stator interactions

In this study, the unsteady, thin-layer, Navier-Stokes equations are solved using a system of patched grids for a rotor-stator configuration of an axial turbine. The study focuses on the plurality of spinning modes that are present in such an interaction. The propagation of these modes in the upstream and downstream regions is analyzed and compared with numerical results. It was found that the numerically calculated tonal acoustics could be affected by the type of numerical boundary conditions employed at the inlet and exit of the computational boundaries and the grid spacing in the upstream and downstream regions. Results in the form of surface pressure amplitudes and the spectra of turbine tones and their far field behavior are presented. Numerical results and experimental data are compared wherever possible. The 'mode-content' for different harmonics of blade-passage frequency is shown to conform with that predicted by a kinematical analysis.

Rangwalla, A. A.↗
NASA NTRS1959

Experimental Evaluation of Cermet Turbine Stator Blades for Use at Elevated Gas Temperatures

The suitability of cermets for turbine stator blades of a modified turbojet engine was determined at an average turbine-inlet-gas temperature of 2000 F. Such an increase in temperature would yield a premium in thrust from a service engine. Because the cermet blades require no cooling, all the available compressor bleed air could be used to cool a turbine made from conventional ductile alloys. Cermet blades were first run in 100-hour endurance tests at normal gas temperatures in order to evaluate two methods for mounting them. The elevated gas-temperature test was then run using the method of support considered best for high-temperature operation. After 52 hours at 2000 F, one of the group of four cermet blades fractured probably because of end loads resulting from thermal distortion of the spacer band of the nozzle diaphragm. Improved design of a service engine would preclude this cause of premature failure.

Chiarito, Patrick T.↗
NASA NTRS1999

Magnetic Flux Compression Using Detonation Plasma Armatures and Superconductor Stators: Integrated Propulsion and Power Applications

This presentation discusses the use of magnetic flux compression for space flight applications as a propulsion and other power applications. The qualities of this technology that make it suitable for spaceflight propulsion and power, are that it has high power density, it can give multimegawatt energy bursts, and terawatt power bursts, it can produce the pulse power for low impedance dense plasma devices (e.g., pulse fusion drivers), and it can produce direct thrust. The issues of a metal vs plasma armature are discussed, and the requirements for high energy output, and fast pulse rise time requires a high speed armature. The plasma armature enables repetitive firing capabilities. The issues concerning the high temperature superconductor stator are also discussed. The concept of the radial mode pulse power generator is described. The proposed research strategy combines the use of computational modeling (i.e., magnetohydrodynamic computations, and finite element modeling) and laboratory experiments to create a demonstration device.

Litchford, Ron↗
NASA NTRS2001

Predicting the Rotor-Stator Interaction Acoustics of a Ducted Fan Engine

A Navier-Stokes computation is performed for a ducted-fan configuration with the goal of predicting rotor-stator noise generation without having to resort to heuristic modeling. The calculated pressure field in the inlet region is decomposed into classical infinite-duct modes, which are then used in either a hybrid finite-element/Kirchhoff surface method or boundary integral equation method to calculate the far field noise. Comparisons with experimental data are presented, including rotor wake surveys and far field sound pressure levels for two blade passage frequency (BPF) tones.

Biedron, Robert T.↗