Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “States”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Design, Synthesis, and Characterization of Polymer Precursors to Li x PON and Li x SiPON Glasses: Materials That Enable All-Solid-State Batteries (ASBs)

LiPON-like glasses that form lithium dendrite impenetrable interfaces between lithium battery components are enabling materials that may replace liquid electrolytes permitting production of all-solid-state batteries (ASBs). Unfortunately, to date, such materials are introduced only via gas-phase deposition. Furthermore, we demonstrate the design and synthesis of easily scaled, lowtemperature, low-cost, solution-processable inorganic polymers containing LiPON/LiSiPON elements. OPCl 3 and hexachlorophosphazene [Cl 2 P=N] 3 provide starting points for elaboration using MNH 2 (M = Li/Na) or (Me 3 Si)NH followed by reaction with controlled amounts of LiNH 2 to produce oligomers/polymers with molecular weights (MWs) ≈1–2 kDa characterized by multinuclear NMR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and matrix-assisted laser desorption/ ionization (MALDI)-time-of-flight (ToF) offering stabilities to 150–200 °C and ceramic yields (800 °C) of 50–60%. 7 Li NMR suggests that precursor-bound Li + dissociates easily, beneficial for electrochemical applications. XPS shows higher N/P ratios (1–3) than via gas-phase methods (<1) correlating N/P ratios, 7 Li shifts, and Li + conductivities. Li 2 SiPHN offers the highest ambient conductivity of 3 × 10 –1 mS cm –1 at 400 °C/2 h/N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Indistinguishable telecom band photons from a single Er ion in the solid state

Atomic defects in the solid state are a key component of quantum repeater networks for long-distance quantum communication1. Recently, there has been significant interest in rare earth ions, in particular Er 3+ for its telecom band optical transition that allows long-distance transmission in optical fibres. However, the development of repeater nodes based on rare earth ions has been hampered by optical spectral diffusion, precluding indistinguishable single-photon generation. Here, we implant Er 3+ into CaWO 4 , a material that combines a non-polar site symmetry, low decoherence from nuclear spins and is free of background rare earth ions, to realize significantly reduced optical spectral diffusion. For shallow implanted ions coupled to nanophotonic cavities with large Purcell factor, we observe single-scan optical linewidths of 150 kHz and long-term spectral diffusion of 63 kHz, both close to the Purcell-enhanced radiative linewidth of 21 kHz. This enables the observation of Hong–Ou–Mandel interference between successively emitted photons with a visibility of V = 80(4)%, measured after a 36 km delay line. We also observe spin relaxation times T 1,s = 3.7 s and T 2,s > 200 μs, with the latter limited by paramagnetic impurities in the crystal instead of nuclear spins. Furthermore, this represents a notable step towards the construction of telecom band quantum repeater networks with single Er 3+ ions.

42 ENGINEERING↗
DOE OSTI2021

Behavioral state resource selection in invasive wild pigs in the Southeastern United States

Elucidating correlations between wild pig ( Sus scrofa ) behavior and landscape attributes can aid in the advancement of management strategies for controlling populations. Using GPS data from 49 wild pigs in the southeastern U.S., we used hidden Markov models to define movement path characteristics and assign behaviors (e.g., resting, foraging, travelling). We then explored the connection between these behaviors and resource selection for both sexes between two distinct seasons based on forage availability (i.e., low forage, high forage). Females demonstrated a crepuscular activity pattern in the high-forage season and a variable pattern in the low-forage season, while males exhibited nocturnal activity patterns across both seasons. Wild pigs selected for bottomland hardwoods and dense canopy cover in all behavioral states in both seasons. Males selected for diversity in vegetation types while foraging in the low-forage season compared to the high-forage season and demonstrated an increased use of linear anthropogenic features across seasons while traveling. Wild pigs can establish populations and home ranges in an array of landscapes, but our results demonstrate male and female pigs exhibit clear differences in movement behavior and there are key resources associated with common behaviors that can be targeted to improve the efficiency of management programs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The roles of kinematic constraint and diffusion in non-equilibrium solid state phase transformations of Ti-6Al-4V

A solid state phase transformation of Ti-6Al-4V was studied using high speed in situ x-ray diffraction measurements made during rapid cooling of a cold metal transfer arc weld bead deposited onto a water cooled substrate. Analysis of body centered cubic (BCC) and hexagonal close packed (HCP) lattices revealed an abrupt, nonlinear shift in the lattice parameters of both phases just after the HCP phase had nucleated. Postmortem transmission electron microscopy confirmed that V diffusion was mostly suppressed during cooling. Together, these results indicate that at this cooling rate of approximately 10 4 K/s, which is representative of cooling rates of many additive manufacturing and welding processes, kinematic coherency of the BCC–HCP interfaces gives rise to the anomalous lattice expansion and contraction behaviors of both phases during the initial nucleation and growth stages of (mostly) martensitic transformation from BCC to HCP; the role of diffusion in such lattice anomalies is shown to be minimal.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Comment on ‘Carbon Intensity of corn ethanol in the United States: state of the science’

Abstract In their recent contribution, Scully et al (2021 Environ. Res. Lett. 16 043001) review and revise past life cycle assessments of corn-grain ethanol’s carbon (C) intensity to suggest that a current ‘central best estimate’ is considerably less than all prior estimates. Their conclusion emerges from selection and recombination of sector-specific greenhouse gas emission predictions from disparate studies in a way that disproportionately favors small values and optimistic assumptions without rigorous justification nor empirical support. Their revisions most profoundly reduce predicted land use change (LUC) emissions, for which they propose a central estimate that is roughly half the smallest comparable value they review (figure 1). This LUC estimate represents the midpoint of (a) values retained after filtering the predictions of past studies based on a set of unfounded criteria; and (b) a new estimate they generate for domestic (i.e. U.S.) LUC emissions. The filter the authors apply endorses a singular means of LUC assessment which they assert as the ‘best practice’ despite a recent unacknowledged review (Malins et al 2020 J. Clean. Prod. 258 120716) that shows this method almost certainly underestimates LUC. Moreover, their domestic C intensity estimate surprisingly suggests that cropland expansion newly sequesters soil C, counter to ecological theory and empirical evidence. These issues, among others, prove to grossly underestimate the C intensity of corn-grain ethanol and mischaracterize the state of our science at the risk of perversely affecting policy outcomes.

Spawn-Lee, Seth A. (ORCID:0000000188215345)↗
DOE OSTI2021

Strategies for solving the excited-state self-consistent-field problem for highly excited and multiply ionized states

The dynamics of molecules exposed to intense x-ray radiation involve a large number of multiply ionized and highly excited electronic configurations. To model these dynamics a reliable and efficient electronic structure model is imperative. Employing the Hartree-Fock-Slater electronic structure model in combination with the maximum overlap method, we quantify the associated convergence failures when calculating electronic states of carbon monoxide with multiple vacancies in the core and valence levels. Here, we characterize these cases and describe strategies to overcome the convergence problems. The described techniques not only eliminate all convergence issues for CO but also result in a significant reduction of convergence failures for simulations of the x-ray-induced multiple ionization dynamics of the phenol molecule.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Sustainable Aviation Fuel (SAF) State-of-Industry Report: State of SAF Production Process

GHG emissions related to commercial air travel were already significant, at 10% of the domestic transportation emissions and 3% of the global greenhouse gas emissions prior to the pandemic, and are expected to double by 2050, even with modest projected growth in air travel. Since Sustainable Aviation Fuel (SAF) is the only way that medium to long haul commercial aviation can be decarbonized, a US government wide "SAF Grand Challenge" was issued to encourage industry to develop capabilities to produce SAF, to reduce cost, improve sustainability, build value chains, and to scale production capabilities (1). The targets are to expand current domestic SAF 2022 production by 200X to 3 billion gallons per year by 2030, and then further by 12X to 35 billion gallons by 2050, while achieving life cycle GHG reduction of 50% relative to fossil Jet A. Following the SAF Grand Challenge, the DOE, USDA, EPA and FAA collaboratively developed a comprehensive strategy, outlined in the "SAF Grand Challenge Roadmap" (2), to inform stakeholders of the actions necessary to achieve the above volumetric targets. The purpose of this study is to provide an assessment of the current state of the SAF production industry and identify challenges and hurdles that industry may face in delivering the 2030 goals. This assessment is for the potential feedstocks and conversion pathways expected to contribute to 2030 goals and will generally follow action areas in the SAF Grand Challenge: feedstocks, conversion technology, supply chain, and policy & valuation.

09 BIOMASS FUELS↗
DOE OSTI2023

Neutron Imaging of Al6061 Prepared by Solid-State Friction Stir Additive Manufacturing

Solid-state Friction Stir Additive Manufacturing has recently gained attention as a result of its capacity to fabricate large-scale parts while preserving the mechanical properties of the feedstock material. However, the correlation between the quality of layer-by-layer bonding of the deposited metal and processing parameters has remained unknown. Neutron imaging techniques, with 90% total transmission per cm, are employed for Al6061 parts fabricated by MELD ® Technology as a non-destructive evaluation approach for the first time to investigate the layer-by-layer structure of a stadium-shaped ingot in different sections. The post-processed results show the fabricated parts with an optimized set of processing parameters are void-free. However, the hydrocarbon-based feedstock lubricant segregates between the layers, which consequently may lead to non-uniform weaker mechanical properties along the build direction and stimulate crack initiation during mechanical loading. The tensile test results show 14% lower strain-to-failure values in alleged contaminated areas in transmission imaging results. Additionally, layer bonding is significantly impacted by hot-on-hot and hot-on-cold layer deposition schemes, especially for larger layer thicknesses.

36 MATERIALS SCIENCE↗