Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spatial resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Spatial resolution estimation of LANDSAT-4 TM and MSS data

In order to verify that the LANDSAT-4 sensors are operating within specifications, it is useful to estimate the system parameters by analysis of the measured data. One parameter of particular interest is the sensor point-spread function (PSF) which determines the resolution of the system. A method of estimating the PSF is described that utilizes data obtained during scanning of ground elements having identifiable geometric and radiometric structure. These data are then processed in such a manner as to recover either the PSF itself or to estimate the parameters of an assumed functional representation of the PSF.

Mcgillem, C. D.↗

High spatial resolution VLA observations of the R Aquarii jet

The Very Large Array was used to observe the jet feature of the symbiotic variable R Aquarii. A steady emission at 6 cm was confirmed for the past year, with the jet located 6.4 arcsec from R Aquarii at 29.3 deg PA. A velocity for the jet has been calculated as 40 km/sec, and may be accompanied by an ejection velocity in the range of 760-1800 km/sec. Since R Aquarii is the closest known object with a jet, further monitoring is recommended in order to detect any episodic mass transfer in what may be a binary system. The mass transfer, monitored at various wavelengths, would account for the observed optical and radio properties.

Kafatos, M.↗

Spatial Resolution Estimation of LANDSAT-4 TM Data

Experiments to determine overall radiometric resolution are discussed. Scene structures, such as roads and field edges, are used with numerical estimation procedures to predict resolution in LANDSAT 4 Thematic Mapper imagery. A nominal resolution of 39 meters is determined rather than the predicted 30 meter prelaunch estimates.

Mcgillem, C. D.↗

Spatial Resolution Estimation of LANDSAT-4 Thematic Mapper Data

The problem of estimating the overall point-spread function (PSF) of multispectral scanner systems was studied using real scene data and known geometric structures in the scene. A direct solution to an approximate form of the PSF was made along with a method using the derivative of an estimated edge response. Both results agreed closely. The TM scanner system specifications are given in line-spread function width and these values are listed with the experimental results in terms of meters. The estimated values are very reasonable, considering the number of factors which could be influencing the result. The atmosphere will have a blurring effect on the overall PSF as well as on cubic convolution resampling effects and possible electronic effects not accounted for in the specification. Also, the specific definition of the LSF specification is not known nor is the actual altitude at the instant the data were acquired. Thus the nominal overall PSF half-amplitude width of 39 m is reasonable; however, a greater sample of scene objects should be evaluated to furthur verify this result.

Mcgillem, C. D.↗

Modification of a variational objective analysis model for new equations for pressure gradient and vertical velocity in the lower troposphere and for spatial resolution and accuracy of satellite data

Since late 1982 NASA has supported research to develop a numerical variational model for the diagnostic assimilation of conventional and space-based meteorological data. In order to analyze the model components, four variational models are defined dividing the problem naturally according to increasing complexity. The first of these variational models (MODEL I), the subject of this report, contains the two nonlinear horizontal momentum equations, the integrated continuity equation, and the hydrostatic equation. This report summarizes the results of research (1) to improve the way the large nonmeteorological parts of the pressure gradient force are partitioned between the two terms of the pressure gradient force terms of the horizontal momentum equations, (2) to generalize the integrated continuity equation to account for variable pressure thickness over elevated terrain, and (3) to introduce horizontal variation in the precision modulus weights for the observations.

Achtemeier, G. L.↗

High spatial resolution passive microwave sounding systems

Two extensive series of flights aboard the ER-2 aircraft were conducted with the MIT 118 GHz imaging spectrometer together with a 53.6 GHz nadir channel and a TV camera record of the mission. Other microwave sensors, including a 183 GHz imaging spectrometer were flown simultaneously by other research groups. Work also continued on evaluating the impact of high-resolution passive microwave soundings upon numerical weather prediction models.

Staelin, D. H.↗

Spatial resolution and nature of defects produced by low-energy proton irradiation of GaAs solar cells

AlGaAs/GaAs solar cells with about 0.5-micron-thick Al(0.85)Ga(0.15)As window layers were irradiated using isotropic and normal incidence protons having energies between 50 and 500 keV with fluences up to 1 x 10 to the 12th protons/sq cm. Although the projected range for these protons varies from 0 to more than 4.5 microns, the recombination losses due to the irradiation-induced defects were observed to be maximum in the vicinity of the AlGaAs/GaAs interface and the space-charge region irrespective of the proton energy. This was found by analyzing spectral response measurements. The results are explained by using a model in which the interaction of as-grown dislocations with irradiation-induced point defects is considered.

Kachare, R.↗

A high resolution spatial and temporal multiple Doppler analysis of a microburst and its application to aircraft flight simulation

Multiple Doppler radar data collected during the Joint Airport Weather Studies (JAWS) Project is used to synthesize the three-dimensional wind in the region of a microburst. The particular microburst used in this study is the strongest one to date for which three-dimensional winds have been recovered. As a diagnostic tool, a six-DOF numerical aircraft model having characteristics similar to 727 series aircraft is used to investigate jet transport aircraft response to observed microburst winds during simulated approaches and departures. Simple pilot control laws are used to adjust thrust, pitch, roll, and yaw so as to maintain given approach or departure parameters. Generally, when horizontal wind shear along the approach or departure path is 0.01/s or greater, the model is unable to maintain the desired approach path and suffers a significant reduction in climb performance during a go-around or departure. Although the mean wind shear along a path gives a good qualitative measure of the wind shear threat to a jet transport, different paths with similar mean shears can yield markedly different results, as do the same paths through the microburst at different times. These findings are a direct consequence of the fine temporal and spatial scale of microburst winds. During any given modeled aircraft traverse through the region of highest horizontal shear, time variations in the microburst wind field are shown to have an insignificant effect on the modeled flight path. This is because the traverse period is short (30 s) compared to the lifetime of a microburst (300-600 s).

Elmore, K. L.↗

A high spatial resolution study of microwave flare precursors

Several examples of preflare changes are provided from VLA high-resolution microwave data, which show that in general the active region increases in intensity and polarization over a period of several tens of minutes prior to the onset of a flare in that region. However, this phenomenon by itself does not appear to be sufficient to trigger a flare. It is shown that at 10 min or less before flare onset something else happens, usually in the form of one of the following three features: (1) sudden change of polarization of the flaring region, (2) change of orientation of the neutral plane separating one polarity from another in a bipolar region, and (3) appearance of new sources in the immediate vicinity of some preexisting structure of the active region. All three features are consistent with the emergence of new flux, which interacts with a preexisting region to form a neutral or current sheet. The formation of the latter is ultimately responsible for triggering the onset of a flare.

Kundu, M. R.↗

High-spatial-resolution TOVS observations for the FIRE/SRB Wisconsin experiment region from October 14 through November 2, 1986

Maps and concise tables are presented which show TOVS (TIROS Operational Vertical Sounder) HIRS/2 (High Resolution Infrared Sounder) data products, resolution size, and sounding location for the FIRE/SRB (First ISCCP Experiment/Surface Radiation Budget) Wisconsin experiment region from October 14 through November 2, 1986. The data presented are the result of a special analysis of the HIRS/2 sounder from the NOAA-9 and -10 satellites.

Whitlock, Charles H.↗

Spatial resolution and the geologic interpretation of Martian morphology - Implications for subsurface volatiles

Viking Orbiter images of the Acheron Fossae on Mars are presented and analyzed, with an emphasis on the impact of image resolution on the interpretation. High-resolution (less than 10 m/pixel) images reveal small mounds which can be interpreted as aeolian dunes, but these features are not evident on images with resolution of 50 m/pixel or greater. Also reported are the results of a visual inspection of 527 usable high-resolution images: it is found that all of the morphological features identified can arise in the absence of subsurface volatiles.

Zimbelman, James R.↗

High spatial resolution 10 micron imaging of IRC + 10216

Precise high-resolution 10-micron images of the carbon star IRC + 10216 have been obtained with a scanned linear array. The low noise and high dynamic range of these images permit deconvolution of the telescope point-spread function, revealing the radial brightness distribution of the circumstellar dust shell: approximate reflection symmetry is found in west-east scans, with a distinct division into two components of diameter about 0.40 and 2.2 arcsec. It is shown that this morphology is consistent with published interferometric data that had cast doubt upon an earlier, idealized two-component model. The observed brightness distribution implies that the circumstellar dust density may deviate substantially from the 1/r squared radial dependence expected for spherically symmetric outflow with constant velocity and constant rate of mass loss.

Bloemhof, E. E.↗

High spatial resolution far-infrared scans of W3(OH)

The strong far-infrared continuum source associated with the OH maser-ultracompact H II region W3(OH) was observed from the Kuiper Airborne Observatory in order to determine its size at 50 and 100 microns. Maximum entropy deconvolutions of the slit scans made in orthogonal directions across the source show it to be approximately circular with FWHM sizes of 8 arcsec and 13 arcsec at 50 and 100 microns, respectively. For these sizes, W3(OH) is optically thick in the far-infrared. A spherically symmetric, dusty molecular cloud model is developed to fit the data.

Campbell, M. F.↗

Cloud field classification based upon high spatial resolution textural features. II - Simplified vector approaches

This paper compares the results of cloud-field classification derived from two simplified vector approaches, the Sum and Difference Histogram (SADH) and the Gray Level Difference Vector (GLDV), with the results produced by the Gray Level Cooccurrence Matrix (GLCM) approach described by Welch et al. (1988). It is shown that the SADH method produces accuracies equivalent to those obtained using the GLCM method, while the GLDV method fails to resolve error clusters. Compared to the GLCM method, the SADH method leads to a 31 percent saving in run time and a 50 percent saving in storage requirements, while the GLVD approach leads to a 40 percent saving in run time and an 87 percent saving in storage requirements.

Chen, D. W.↗

High-spatial-resolution passive microwave sounding systems

During this period the emphasis was on the following: (1) further design, construction, and testing of the improved 54-GHz portion of the 54-118 GHz microwave temperature sounder (MTS) aircraft radiometer system in preparation for ER-2 observations in July 1991; and (2) final analysis and documentation of procedures for detecting and analyzing thermal waves in our 118-GHz MTS imagery. In addition, we have new unpublished measurements of dry-air attenuation at frequencies of 54 to 66 GHz and over a temperature range of 280K to 326K; these measurements should enable us to improve further our atmospheric transmittance models. It was further noted that the proposed SSMIS conical-scanning microwave spectrometer on the military DMSP Block 5D-3 spacecraft designed to measure stratospheric and mesospheric temperature profiles will be observing the Zeeman-split oxygen lines with sufficient spectral resolution that the changing Doppler shifts with view angle will substantially degrade the potential system performance unless remedied; this was briefly studied and documented.

Staelin, David H.↗

High spatial resolution continuum and H-alpha imaging of the high-redshift IRAS source FSC 10214+4724

New observations are reported which support the view that the high-redshift IRAS source FSC 10214+4724 is a rare extreme example of the class of ultraluminous infrared galaxies observed in the local universe. The presence of two continuum components and a compact H-alpha source suggests that a merger between two or more gas-rich systems has triggered the production of a powerful dust-enshrouded quasar which is responsible for the bulk of the luminosity.

Soifer, B. T.↗