SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract We revisit the graphic table of QCD signatures in our 1996 Annual Reviews article “The Search for the Quark–Gluon Plasma” and assess the progress that has been made since its publication towards providing quantitative evidence for the formation of a quark–gluon plasma in relativistic heavy-ion collisions and its characteristic properties.
The existence of right-handed neutrinos with Majorana masses below the electroweak scale could help address the origins of neutrino masses, the matter–antimatter asymmetry, and dark matter. In this paper, leptonic decays of W bosons from 140 fb-1$$^{-1}$$ of 13 TeV proton–proton collisions at the LHC, reconstructed in the ATLAS experiment, are used to search for heavy neutral leptons produced through their mixing with muon or electron neutrinos in a scenario with lepton number violation. The search is conducted using prompt leptonic decay signatures. The considered final states require two same-charge leptons or three leptons, while vetoing three-lepton same-flavour topologies. No significant excess over the expected Standard Model backgrounds is found, leading to constraints on the heavy neutral lepton’s mixing with muon and electron neutrinos for heavy-neutral-lepton masses. The analysis excludes |Ue|2$$|U_{e}|^2$$ values above 8×10-5$$8\times 10^{-5}$$ and |Uμ|2$$|U_{\mu }|^2$$ values above 5.0×10-5$$5.0 \times 10^{-5}$$ in the full mass range of 8–65 GeV. The strongest constraints are placed on heavy-neutral-lepton masses in the range 15–30 GeV of |Ue|2<1.1×10-5$$|U_{e}|^2 < 1.1 \times 10^{-5}$$ and |Uμ|2<5×10-6$$|U_{\mu }|^2 < 5 \times 10^{-6}$$.
Protective relays in electric power grids recognize the types of electrical faults in a few seconds. The most common detection method to detect the types of electrical faults is based on measuring the angle between the zero and negative sequence currents. However, it is not completely accurate because the phase-to-phase-ground and phase-to-ground electrical faults could have the same detection conditions. Therefore, engineers need to plot the events after an electrical fault to observe the nature of the incidents in detail. In this study, the phase-to-ground fault apparent (PGFA) admittance method with phase/ground boundaries identified the types of electrical faults located in distribution power lines and feeders. This method was based on measuring the PGFA admittance magnitudes for the faulted and nonfaulted phases, resulting in greater than zero and near zero, respectively. The PGFA admittance algorithm was built with MATLAB/Simulink software and tested with signature library and grid simulation events. The PGFA method with phase/ground boundaries was evaluated with the confusion matrix. The measured and predicted values matched in more than 90% of the tests, and the PGFA admittance method with phase/ground boundaries presented an accuracy of 94.3% and a precision of 100%.
Abstract This study evaluates ice particle size distribution and aspect ratio φ Multi-Radar Multi-Sensor (MRMS) dual-polarization radar retrievals through a direct comparison with two legs of observational aircraft data obtained during a winter storm case from the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) campaign. In situ cloud probes, satellite, and MRMS observations illustrate that the often-observed K dp and Z DR enhancement regions in the dendritic growth layer can either indicate a local number concentration increase of dry ice particles or the presence of ice particles mixed with a significant number of supercooled liquid droplets. Relative to in situ measurements, MRMS retrievals on average underestimated mean volume diameters by 50% and overestimated number concentrations by over 100%. IWC retrievals using Z DR and K dp within the dendritic growth layer were minimally biased relative to in situ calculations where retrievals yielded −2% median relative error for the entire aircraft leg. Incorporating φ retrievals decreased both the magnitude and spread of polarimetric retrievals below the dendritic growth layer. While φ radar retrievals suggest that observed dendritic growth layer particles were nonspherical (0.1 ≤ φ ≤ 0.2), in situ projected aspect ratios, idealized numerical simulations, and habit classifications from cloud probe images suggest that the population mean φ was generally much higher. Coordinated aircraft radar reflectivity with in situ observations suggests that the MRMS systematically underestimated reflectivity and could not resolve local peaks in mean volume diameter sizes. These results highlight the need to consider particle assumptions and radar limitations when performing retrievals. significance statement Developing snow is often detectable using weather radars. Meteorologists combine these radar measurements with mathematical equations to study how snow forms in order to determine how much snow will fall. This study evaluates current methods for estimating the total number and mass, sizes, and shapes of snowflakes from radar using images of individual snowflakes taken during two aircraft legs. Radar estimates of snowflake properties were most consistent with aircraft data inside regions with prominent radar signatures. However, radar estimates of snowflake shapes were not consistent with observed shapes estimated from the snowflake images. Although additional research is needed, these results bolster understanding of snow-growth physics and uncertainties between radar measurements and snow production that can improve future snowfall forecasting.
Weather radars with dual-polarization capabilities enable the study of various characteristics of hydrometeors, including their size, shape, and orientation. Radar polarimetric measurements, coupled with Doppler information, allow for analysis in the spectral domain. This analysis can be leveraged to reveal valuable insight into the microphysics and kinematics of hydrometeors in precipitation systems. This paper uses spectral polarimetry to investigate precipitation microphysics and kinematics in storm environments observed during the Remote Sensing of Electrification, Lightning, and Mesoscale/Microscale Processes with Adaptive Ground Observations (RELAMPAGO) field experiment in Argentina. This study uses range–height indicator scan measurements from a C-band polarimetric Doppler weather radar deployed during the field campaign. Here, in this work, the impact of storm dynamics on hydrometeors is studied, including the size sorting of hydrometeors due to vertical wind shear. In addition, particle microphysical processes because of aggregation and growth of ice crystals in anvil clouds, as well as graupel formation resulting from the riming of ice crystals and dendrites, are also analyzed here. The presence of different particle size distributions because of the mixing of hydrometeors in a sheared environment and resulting size sorting has been reported using spectral differential reflectivity (sZ dr ) slope. Spectral reflectivity sZ h and sZ dr have also been used to understand the signature of ice crystal aggregation in an anvil cloud. The regions of pristine ice crystals are identified from vertical profiles of spectral polarimetric variables in anvil cloud because of sZ h < 0 dB and sZ dr values around 2 dB. It is also found that the growth process of these ice crystals causes a skewed bimodal sZ h spectrum due to the presence of both pristine ice crystals and dry snow. Next, graupel formation due to riming has been studied, and it is found that the riming process produces sZ h values of about 10 dB and corresponding sZ dr values of 1 dB. This positive sZ dr indicates the presence of needle/columnar secondary ice particles formed by ice multiplication processes in the riming zones. Last, the temporal evolution of a storm is investigated by analyzing changes in hydrometeor types with time and their influence on the spectral polarimetric variables.
Lithium isotopic ratios have wide ranging applications as chemical signatures, including improved understanding of geochemical processes and battery development. Measurement of isotope ratios using optical spectroscopies would provide an alternative to traditional mass spectrometric methods, which are expensive and often limited to a chemical laboratory. In this work, Raman spectra of 7 Li 2 CO 3 , 6 Li 2 CO 3 , 7 LiOH*H 2 O and 6 LiOH*H 2 O have been measured to determine the effect of lithium isotope substitution on the Raman molecular vibrations. Thirteen peaks were observed in the spectrum of lithium carbonate, with discernable isotopic shifts occurring in eleven of the thirteen vibrations, two of which have not been previously reported in the literature. The spectrum of lithium hydroxide monohydrate contained nine peaks, with discernable isotopic shifts occurring in eight of the nine vibrations, four of which have not been previously reported in the literature. The Raman spectral data reported here for lithium carbonate and lithium hydroxide monohydrate are in agreement with the previously reported works in the literature, in which the Raman active modes of these molecules were first identified and assigned. However, due to the stability and resolution of the detection system used in this work, isotopic shifts with a magnitude less than one wavenumber have been identified. Principal Component Regression was used to evaluate the sensitivity to isotopic content of small Raman peak shifts in Li 2 CO 3 and indicates differences greater than 2 atom-% could be reliably determined. These measurements add to the body of work on lithium isotope Raman spectroscopy for these two compounds and increases the number of Raman bands which could be used for lithium isotope content analysis.
The colonization of land and the diversification of terrestrial plants is intimately linked to the evolutionary history of their symbiotic fungal partners. Extant representatives of these fungal lineages include mutualistic plant symbionts, the arbuscular mycorrhizal (AM) fungi in Glomeromycota and fine root endophytes in Endogonales (Mucoromycota), as well as fungi with saprotrophic, pathogenic and endophytic lifestyles. These fungal groups separate into three monophyletic lineages but their evolutionary relationships remain enigmatic confounding ancestral reconstructions. Their taxonomic ranks are currently fluid. In this study, we recognize these three monophyletic linages as phyla, and use a balanced taxon sampling and broad taxonomic representation for phylogenomic analysis that rejects a hard polytomy and resolves Glomeromycota as sister to a clade composed of Mucoromycota and Mortierellomycota. Low copy numbers of genes associated with plant cell wall degradation could not be assigned to the transition to a plant symbiotic lifestyle but appears to be an ancestral phylogenetic signal. Both plant symbiotic lineages, Glomeromycota and Endogonales, lack numerous thiamine metabolism genes but the lack of fatty acid synthesis genes is specific to AM fungi. Many genes previously thought to be missing specifically in Glomeromycota are either missing in all analyzed phyla, or in some cases, are actually present in some of the analyzed AM fungal lineages, e.g. the high affinity phosphorus transporter Pho89. Based on a broad taxon sampling of fungal genomes we present a well-supported phylogeny for AM fungi and their sister lineages. We show that among these lineages, two independent evolutionary transitions to mutualistic plant symbiosis happened in a genomic background profoundly different from that known from the emergence of ectomycorrhizal fungi in Dikarya. These results call for further reevaluation of genomic signatures associated with plant symbiosis.
This dataset includes Python scripts for analyzing the neutron and X-ray scattering and neutron spin-echo data presented in the paper “Signatures of Thermoreversible Associations in X-ray and Neutron Scattering from Dilute Polyzwitterion Solutions” by Li et al. (https://doi.org/10.1021/acs.macromol.5c02554).
Many distantly related organisms have convergently evolved traits and lifestyles that enable them to live in similar ecological environments. However, the extent of phenotypic convergence evolving through the same or distinct genetic trajectories remains an open question. Here, we leverage a comprehensive dataset of genomic and phenotypic data from 1,049 yeast species in the subphylum Saccharomycotina (Kingdom Fungi, Phylum Ascomycota) to explore signatures of convergent evolution in cactophilic yeasts, ecological specialists associated with cacti. We inferred that the ecological association of yeasts with cacti arose independently approximately 17 times. Using a machine learning–based approach, we further found that cactophily can be predicted with 76% accuracy from both functional genomic and phenotypic data. The most informative feature for predicting cactophily was thermotolerance, which we found to be likely associated with altered evolutionary rates of genes impacting the cell envelope in several cactophilic lineages. We also identified horizontal gene transfer and duplication events of plant cell wall–degrading enzymes in distantly related cactophilic clades, suggesting that putatively adaptive traits evolved independently through disparate molecular mechanisms. Notably, we found that multiple cactophilic species and their close relatives have been reported as emerging human opportunistic pathogens, suggesting that the cactophilic lifestyle—and perhaps more generally lifestyles favoring thermotolerance—might preadapt yeasts to cause human disease. This work underscores the potential of a multifaceted approach involving high-throughput genomic and phenotypic data to shed light onto ecological adaptation and highlights how convergent evolution to wild environments could facilitate the transition to human pathogenicity.
α-UO 3 is a common intermediate compound found in the nuclear fuel cycle, yet the exact crystal structure of this material has long been debated. Inconsistent computational and experimental data in previous works has led to varying conclusions between authors. Furthermore, to ensure the validity of our results in this work, the structural and spectroscopic signatures of pure phase α-UO 3 are investigated using powder X-ray diffraction and optical vibrational spectroscopy (infrared and Raman). Rietveld refinement of powder X-ray diffraction data on pure phase α-UO 3 collected in this work allows us to propose an alteration to the currently accepted C2mm structure (a = 3.9705 Å, b = 6.8553 Å, c = 4.15955 Å, α = β = γ = 90°) for α-UO 3 with no uranyl [UO 2 2+ ] bonds. Raman spectra collected using two excitation wavelengths (two instruments using 532 nm and one 785 nm) are presented, and differences with recently published results are discussed. Infrared spectra from two instruments used here agree well with recently published results, but the spectral range encompassed in our data extends past what has been reported with modern techniques. Additionally, we provide tentative vibrational mode assignments based on density functional perturbation theory calculations and resulting phonon eigenvector visualizations. Unexpected features in the optical vibrational spectra of α-UO 3 are explained by unique features in the structure we present.
This data package is associated with the publication “Investigating the impacts of solid phase extraction on dissolved organic matter optical signatures and the pairing with high-resolution mass spectrometry data in a freshwater system” submitted to “Limnology and Oceanography: Methods.” This data is an extension of the River Corridor and Watershed Biogeochemistry SFA’s Spatial Study 2021 (https://doi.org/10.15485/1898914). Other associated data and field metadata can be found at the link provided. The goal of this manuscript is to assess the impact of solid phase extraction (SPE) on the ability to pair ultra-high resolution mass spectrometry data collected from SPE extracts with optical properties collected on ambient stream samples. Forty-seven samples collected from within the Yakima River Basin, Washington were analyzed dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC), absorbance, and fluorescence. Samples were subsequently concentrated with SPE and reanalyzed for each measurement. The extraction efficiency for the DOC and common optical indices were calculated. In addition, SPE samples were subject to ultra-high resolution mass spectrometry and compared with the ambient and SPE generated optical data. Finally, in addition to this cross-platform inter-comparison, we further performed and intra-comparison among the high-resolution mass spectrometry data to determine the impact of sample preparation on the interpretability of results. Here, the SPE samples were prepared at 40 milligrams per liter (mg/L) based on the known DOC extraction efficiency of the samples (ranging from ~30 to ~75%) compared to the common practice of assuming the DOC extraction efficiency of freshwater samples at 60%. This data package folder consists of one main data folder with one subfolder (Data_Input). The main data folder contains (1) readme; (2) data dictionary (dd); (3) file-level metadata (flmd); (4) final data summary output from processing script; and (5) the processing script. The R-markdown processing script (SPE_Manuscript_Rmarkdown_Data_Package.rmd) contains all code needed to reproduce manuscript statistics and figures (with the exception of that stated below). The Data_Input folder has two subfolders: (1) FTICR and (2) Optics. Additionally, the Data_Input folder contains dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data (SPS_NPOC_Summary.csv) and relevant supporting Solid Phase Extraction Volume information (SPS_SPE_Volumes.csv). Methods information for the optical and FTICR data is embedded in the header rows of SPS_EEMs_Methods.csv and SPS_FTICR_Methods.csv, respectively. In addition, the data dictionary (SPS_SPE_dd.csv), file level metadata (SPS_SPE_flmd.csv), and methods codes (SPS_SPE_Methods_codes.csv) are provided. The FTICR subfolder contains all raw FTICR data as well as instructions for processing. In addition, post processed FTICR molecular information (Processed_FTICRMS_Mol.csv) and sample data (Processed_FTICRMS_Data.csv) is provided that can be directly read into R with the associated R-markdown file. The Optics subfolder contains all Absorbance and Fluorescence Spectra. Fluorescence spectra have been blank corrected, inner filter corrected, and undergone scatter removal. In addition, this folder contains Matlab code used to make a portion of Figure 1 within the manuscript, derive various spectral parameters used within the manuscript, and used for parallel factor analysis (PARAFAC) modeling. Spectral indices (SPS_SpectralIndices.csv) and PARAFAC outputs (SPS_PARAFAC_Model_Loadings.csv and SPS_PARAFAC_Sample_Scores.csv) are directly read into the associated R-markdown file. We acknowledge the Yakama Nation as owners and caretakers of the lands where we collected some of these data. We thank the Confederated Tribes and Bands of the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview.
We discuss our recent progress on improving the theoretical description of the pp \to t\bar{t}W^\pm p p → t t ‾ W ± process with particular focus on fiducial signatures that include top-quark decays. We employ a wide range of techniques from parton shower matching, narrow width approximation to full off-shell computations to assess the importance of the different modeling approaches.
Radiolysis of hydrated alkaline earth chloride salts by alpha radiation from plutonium produces the chloride containing gases HCl and Cl 2 . These gases are known to diffuse out of the plutonium-containing material and contribute to corrosion outside of the convenience container. The alkaline earth elements remain with the plutonium-containing material as oxides or hydroxides. The amount of chlorine within the material after storage will be reduced compared to the amount at packaging. The fraction of the alkaline earth elements that are soluble after storage will be reduced compared to the amount at packaging. These signatures may be observable by comparing the chemical analysis measurements made at packaging and after storage. Comparison of measurements on a single Hanford container shows that the chloride does decrease and the alkaline earth elements have reduced solubility in water. Differences seen with other elements make conclusions difficult.
The MINOS program seeks methods to passively monitor the transfer of special materials, which are reproducible and quantitatively defensible. To date, we have demonstrated that short-period seismometers deployed near vehicle tracks can detect and monitor signatures of multi-axle tractor trailers impacting small road obstacles as means to detect and identify some transfer activities. In this report, we model the seismic velocity signal output from a tractor-trailer impacting a small obstacle (a template waveform) to parameterize a matched filter that identifies signals with similar shapes buried in noise, and that indicate repeating events (target waveforms). We then use this model to perform thousands of synthetic experiments, in which we apply our detector to identify noisy waveforms output from a similarly modeled vehicle data set; we process all data in the same manner as we process real data collected from the Oak Ridge National Laboratory (ORNL) seismic network. Our experiments, while limited, reveal that the matched filter shows a high discrimination capability, and at very low SNR values (at visibility thresholds). This means that template waveforms can match target waveforms that are sourced by models that share the same vehicle speed (target vehicles), and have a low probability of mis-identification. In particular, a matched filter designed to detect a five-axle tractor-trailer will reliably identify that target vehicle down to an SNR of 11.25 dB, and within ±0.1 km/hr, while successfully screening target vehicles with three axles.
Moving from traditional fixed fuel nuclear reactor systems to a mobile, dynamic fuel system that has dissolved special nuclear material in a molten salt is a paradigm shift in several respects. One major consideration is how to develop effective nuclear material controls and accounting for these novel reactor systems. The Molten Salt Reactor Experiment is one example of a critical molten salt system and provided a significant reference library based on the documented effort. But it was low thermal power that was not intended to reflect a commercial scale electricity production design. Therefore, to facilitate and assist vendors with domestic licensing considerations, research is underway to identify methods that could be used for domestic safeguards approaches for these novel reactor systems. This research presents the results of a signature analysis of data generated from three simulated scenarios using the molten salt demonstration reactor model defined in the Transient Simulation Framework of Reconfigurable Modules. Each scenario provides 1 hour isotope inventories over a 180 day period. The scenarios investigated provide test cases to examine if direct gamma-ray spectroscopy of the fuel can be used to identify changes comparing a base case (no reactivity control and fixed fission contribution) to an insertion of reactivity (10 pcm no change in fission composition) and a change in fission composition. The analysis demonstrates that monitoring the total count rate in a highly collimated high-resolution photon energy spectrum is sensitive to perturbations imposed into the reactor model. The total photon count rate changes ≈2% for the fission composition change and ≈4.5% for the reactivity insertion compared to the base case. However, both scenarios show an increase in the total photon count rate. The total photon count rate can be used to identify changes due to power (number of fissions) but not due to a change in the material undergoing fission. To distinguish between the two cases of increased power, the photon spectrum would require an intensive analysis technique. A photon peak count rate ratio analysis could be used to identify changes in the fissile material fission generation in the core through identification of a static peak that shows little variation to the source of fission and a highly varying peak. The photon peak strength will ultimately be determined by the isotope’s fission yield. A preliminary analysis investigating the coupling of the isotope’s fission yield and its concentration in the fuel salt derived from the modeling has been performed. A ratio analysis of the photon peak count rates of 140 La to 99 Mo demonstrated that the reactivity insertion creates a distinct difference in the ratio compared to the fission composition change scenario.
This report highlights the development of advanced analytical capabilities at Oak Ridge National Laboratory to characterize PuO 2 powder to support the Multi-Lab Plutonium Process Signatures Campaign in FY 2022. Two samples from a batch of 76 statistical precipitation runs were packaged and shipped from Pacific Northwest National Laboratory to Oak Ridge National Laboratory at the beginning of FY 2022. Techniques were used to characterize the sample, including powder X-ray diffraction, Raman spectroscopy, and diffuse reflectance spectroscopy. A brief description of each technique, the results and discussion, and future work are described in this report. Opportunities to expand current capabilities and include additional analytical capabilities for the next campaign will also be discussed.
The levels of plastic contamination in the earth’s oceans have steadily increased over the past century, creating a threat to marine life and increasing climate change. Several methods have been developed over the past decade to try to determine the amount and accumulation rate of plastic impurities in the ecosystem. These methods have proven promising but suffer from long measurement times, bulky non-mobile systems, and sample degradation. We propose a smaller, faster system that employs an electron beam to examine seawater samples for polyethylene contamination levels. This process generates a full electron and photon energy spectrum analyses based on the subatomic particles generated from electron interactions. Our simulations have already been developed based on the known molecular composition of seawater and polyethylene, showing the possibility of discerning molecular plastics from microorganisms. With a system the size of a suitcase, this system would be easily deployable to remote locations around the world or installed as a monitoring system for manufacturing facilities. This concept could lead to a new methodology for the science of signatures and be applied to other biological hazard investigations, such as general virus detection.
Cosmology is the study of the history of the Universe. Major topics of current cosmology research include the nature of the dark energy which today is causing the Universe to accelerate, and the nature of cosmic inflation which is our best theory of the very early evolution of the Universe. Each of these topics can be explored with modern cosmological data, and rely on our theories of fundamental physics to operate. Research supported by this grant has led to advances in all these areas. We developed specific models of cosmic inflation and explored potential observations signatures. We explored observational constraints on the number of dimensions of space, which in certain modern theories can take in different values, and developed the specific “brane theories” of dark energy. The possibility that novel quantum effects (“quantum entanglement”) during cosmic inflation could lead to interesting observable phenomena was also explored.