Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Signal detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A microcomputer based frequency-domain processor for laser Doppler anemometry

A prototype multi-channel laser Doppler anemometry (LDA) processor was assembled using a wideband transient recorder and a microcomputer with an array processor for fast Fourier transform (FFT) computations. The prototype instrument was used to acquire, process, and record signals from a three-component wind tunnel LDA system subject to various conditions of noise and flow turbulence. The recorded data was used to evaluate the effectiveness of burst acceptance criteria, processing algorithms, and selection of processing parameters such as record length. The recorded signals were also used to obtain comparative estimates of signal-to-noise ratio between time-domain and frequency-domain signal detection schemes. These comparisons show that the FFT processing scheme allows accurate processing of signals for which the signal-to-noise ratio is 10 to 15 dB less than is practical using counter processors.

Horne, W. Clifton↗

A microcomputer based frequency-domain processor for laser Doppler anemometry

A prototype multi-channel laser Doppler anemometry (LDA) processor was assembled using a wideband transient recorder and a microcomputer with an array processor for fast Fourier transform (FFT) computations. The prototype instrument was used to acquire, process, and record signals from a three-component wind tunnel LDA system subject to various conditions of noise and flow turbulence. The recorded data was used to evaluate the effectiveness of burst acceptance criteria, processing algorithms, and selection of processing parameters such as record length. The recorded signals were also used to obtain comparative estimates of signal-to-noise ratio between time-domain and frequency-domain signal detection schemes. These comparisons show that the FFT processing scheme allows accurate processing of signals for which the signal-to-noise ratio is 10 to 15 dB less than is practical using counter processors.

Horne, W. Clifton↗

Venus lightning

Although it is not unanimously accepted, many independent observations lead to the conclusion that lightning is prevalent on Venus. The EM signals detected by all four Venera landers are most readily explained as generation by lightning. The Venera 9 spectrometer appears to have observed a lightning storm on one occasion. The Pioneer Venus plasma-wave instrument detects waves both below the electron gyrofrequency (that may be due to lightning) and signals above the electron gyrofrequency but at very low altitudes (that may be due to the near field of the lightning). The VLF observations suggest that Venus lightning must be an intracloud phenomenon which is most frequent in the afternoon and evening sector. The occurrence rate is likely to be greater than on earth.

Russell, C. T.↗

Towards a direct measurement of the quantum-vacuum Lagrangian coupling coefficients using two counterpropagating super-intense laser pulses

In this paper we will show that photon–photon collision experiments using extreme lasers can provide measurable effects giving fundamental information about the essence of QED, its Lagrangian. A possible scenario with two counterpropagating ultra-intense lasers for an experiment to detect scattering between optical photons is analyzed. We discuss the importance of the pulse widths and waists, the best scenario for overlapping the beams and signal detection, as well as ways to distinguish the signal from the noise. This would need a high-precision measurement, with control of temporal jitter and noise. We conclude that such experiment is barely feasible at 10 23 W cm -2 and very promising at 10 24 W cm -2

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Very-Long-Distance Remote Hearing and Vibrometry

A proposed development of laser-based instrumentation systems would extend the art of laser Doppler vibrometry beyond the prior limits of laser-assisted remote hearing and industrial vibrometry for detecting defects in operating mechanisms. A system according to the proposal could covertly measure vibrations of objects at distances as large as thousands of kilometers and could process the measurement data to enable recognition of vibrations characteristic of specific objects of interest, thereby enabling recognition of the objects themselves. A typical system as envisioned would be placed in orbit around the Earth for use as a means of determining whether certain objects on or under the ground are of interest as potential military targets. Terrestrial versions of these instruments designed for airborne or land- or sea-based operation could be similarly useful for military or law-enforcement purposes. Prior laser-based remote-hearing systems are not capable of either covert operation or detecting signals beyond modest distances when operated at realistic laser power levels. The performances of prior systems for recognition of objects by remote vibrometry are limited by low signal-to-noise ratios and lack of filtering of optical signals returned from targets. The proposed development would overcome these limitations. A system as proposed would include a narrow-band laser as its target illuminator, a lock-in-detection receiver subsystem, and a laser-power-control subsystem that would utilize feedback of the intensity of background illumination of the target to adjust the laser power. The laser power would be set at a level high enough to enable the desired measurements but below the threshold of detectability by an imaginary typical modern photodetector located at the target and there exposed to the background illumination. The laser beam would be focused tightly on the distant target, such that the receiving optics would be exposed to only one speckle. The return signal would be extremely-narrow-band filtered (to sub-kilohertz bandwidth) in the optical domain by a whispering-gallery- mode filter so as to remove most of the background illumination. The filtered optical signal would be optically amplified. This combination of optical filtering and optical amplification would provide an optical signal that would be strong enough to be detectable but not so strong as to saturate the detector in the lock-in detection subsystem.

Maleki, Lute↗

Venus planetary lightning rate as deduced from VLF bursts

Statistical studies of the VLF bursts detected in the nightside ionosphere of Venus show that the bursts fall into two classes. The first consists of signals detected when vertical propagation within the whistler-mode resonance cone is allowed. The second consists of signals whose burst rate decreases rapidly as a function of increasing altitude, with a scale height of about 20 km. These non-whistler-mode signals also display a strong dependence on local time, with the burst rates being largest in the post-dusk local time sector. Since these signals are not propagating we assume that they correspond to a 'near-field' or prompt response to a lightning stroke. As such we can use these signals to estimate the planetary lightning rate, and we find that the rate at Venus is comparable to or greater than the terrestrial planetary rate of 100 flashes/sec.

Ho, C.-M.↗

Recent developments in CID imaging

Readout of CID imaging arrays was first performed by injecting and detecting the signal charge from each sensing site in sequence. A new readout method, termed parallel injection, has been developed in which the functions of signal charge detection and injection have been separated. The level of signal charge at each sensing site is detected during a line scan, and during the line retrace interval, all charge in the selected line is injected. The parallel injection technique is well adapted to TV scan formats in that the signal is read out at high speed, line by line. A 244 line by 248 element TV compatible imager, employing this technique and including an on chip preamplifier, has been constructed and operation demonstrated.

Michon, G. J.↗

Multishot laser altimeter - Design and performance

The maximum measurement range of a laser altimeter can be extended by averaging the measurements from multiple laser shots at the same target. We present the principles of operation and design of such a multishot laser altimeter, which uses a Si avalanche photodiode detector. As an example, the performance of a spaceborne multishot altimeter containing components similar to those of the single-shot Mars Observer Laser Altimeter are given under operating conditions that would be encountered near Saturn. With 100-shot averages, we show that the multishot laser altimeter is capable of accurate ranging at fly-by distances of 10,000 km from an icy satellite. With 100-shot averages, the minimum optical signal level at a 90 percent correct-measurement probability under nighttime background is 9.8 detected signal photons per pulse as compared with 76 photons per pulse with a single shot.

Sun, Xiaoli↗

Seismoacoustic Data Fusion for Ground Coupled Airwaves: a FACT Case Study for Calibration and Array Processing

This report covers an inquiry into seismoacoustic array processing using infrasound arrivals combined with resulting Ground Coupled Airwaves (GCA) that are present on collocated seismic sensors. In preparation, data calibration and denoising is completed for a seismoacoustic sensor array that was deployed at the Facility for Acceptance, Calibration, and Testing on Kirtland Airforce Base from August through September of 2021. The events of interest for this study are small, local explosive sources that lead to short duration, impulsive signals on the instruments. The goal is to determine if combining infrasound signals with the corresponding GCAs on collocated seismic sensors can be used to improve the results returned by automated signal detection and characterization (e.g., back azimuth estimates). Preparation for seismic and infrasound data involves removing the instrument response so that sensors have flat power spectra over the frequency range 0.1-10 Hz, where signal from events of interest may be detected. After instrument response removal, deployment conditions specific to this array require a retrospective noise analysis to determine station emplacement characteristics. Once all data is calibrated, a manual search is performed for possible GCA arrivals across the seismoacoustic network. These arrivals are then processed through beamforming and subsequent event identification, resulting in a catalogue of seismoacoustic GCA arrivals with corresponding back azimuth and trace velocity estimations.

47 OTHER INSTRUMENTATION↗

Detectability of auditory signals presented without defined observation intervals

Ability to detect tones in noise was measured without defined observation intervals. Latency density functions were estimated for the first response following a signal and, separately, for the first response following randomly distributed instances of background noise. Detection performance was measured by the maximum separation between the cumulative latency density functions for signal-plus-noise and for noise alone. Values of the index of detectability, estimated by this procedure, were approximately those obtained with a 2-dB weaker signal and defined observation intervals. Simulation of defined- and non-defined-interval tasks with an energy detector showed that this device performs very similarly to the human listener in both cases.

Watson, C. S.↗

Microseismic Event Denoising: Removal of Borehole Waves

The vertical borehole array at Farnsworth Unit, TX is used to monitor microseismic activity in the subsurface around the Carbon Capture and Sequestration (CCS) reservoir. The array consists of 16 3-component seismometers spaced vertically in a single borehole. Tube or borehole waves traveling up or down the borehole can corrupt signals of interest, such as microseismic events. A denoising convolutional neural network (DCNN) was trained to remove borehole waves from seismic waveforms of microseismic events for the purpose of reducing unwanted signal detections and better characterizing events of interest. This R&D leverages the work of Sandia colleague Rigo Tibi, who used a DCNN developed by Greg Beroza at Stanford University to improve the signal-to-noise ratio (SNR) of teleseismic events detected by the International Monitoring System.

58 GEOSCIENCES↗

Analysis Of Lock Detection In Costas Loops

Report presents analysis of detection of phase lock in Costas loops, used in coherent binary-phase-shift-keying communication systems to track both subcarrier and suppressed carrier signals. Detection of phase lock important part of operation and monitoring of operation of Costas or other tracking loop, provides insight into behavior of loop in real time. Focuses on effects of phase jitter and correlation between samples of phase error in all-digital Costas loop, in which lock detection implemented via algorithm. Applicable to both sinusoidal and square-law carrier signals, incorporates new mathematical models of square-law and absolute-value detectors.

Mileant, Alexander↗

Apparatus and method for stabilized phase detection for binary signal tracking loops

Apparatus and method is presented for phase detection in binary signal tracking loops wherein two bandpass detectors are alternately interchanged between electrical connection with two local code reference tracking signals in order to cancel any adverse effect of gain imbalance in the bandpass detectors and direct current offset or drift. The detectors are time shared in multiplex fashion between the two local reference signals.

Hopkins, P. M.↗

Constraining magnetic fields in the circumgalactic medium

ABSTRACT We study the properties of magnetic fields in the circumgalactic medium (CGM) of z < 1 galaxies by correlating Faraday rotation measures (RMs) of ∼1000 high-redshift radio sources with the foreground galaxy number density estimated from the DESI Legacy Imaging Surveys. This method enables us to extract signals of RMs contributed by intervening gas around multiple galaxies. Our results show that there is no detectable correlation between the distribution of RMs and the number of foreground galaxies, contrary to several previous results. Utilizing the non-detection signals, we estimate 3σ upper limits to the RMs from the CGM of $\sim \!20 \rm \ rad\, m^{-2}$ within 50 kpc and $\sim \!10 \rm \ rad \, m^{-2}$ at separations of 100 kpc. By adopting a column density distribution of ionized gas obtained from absorption-line measurements, we further estimate the strengths of coherent magnetic fields parallel to the line of sight of $\lt \rm 2 \ \mu G$ in the CGM. We show that the estimated upper limits of RMs and magnetic field strengths are sufficient to constrain outputs of recent galaxy magnetohydrodynamic simulations. Finally, we discuss possible causes for the inconsistency between our results and previous works.

79 ASTRONOMY AND ASTROPHYSICS↗

Prospects of Detecting Nonthermal Protons in Solar Flares via Lyman Line Spectroscopy: Revisiting the Orrall-Zirker Effect

Solar flares are efficient particle accelerators, with a substantial fraction of the energy released manifesting as nonthermal particles. While the role that nonthermal electrons play in transporting flare energy is well studied, the properties and importance of nonthermal protons are rather less well understood. This is in large part due to the paucity of diagnostics, particularly at the lower-energy (deka-keV) range of nonthermal proton distributions in flares. One means to identify the presence of deka-keV protons is by an effect originally described by Orrall & Zirker. In the Orrall–Zirker effect, nonthermal protons interact with ambient neutral hydrogen, and via charge exchange produce a population of energetic neutral atoms (ENAs) in the chromosphere. These ENAs subsequently produce an extremely redshifted photon in the red wings of hydrogen spectral lines. We revisit predictions of the strength of this effect using modern interaction cross sections, and numerical models capable of self-consistently simulating the flaring nonequilibrium ionization stratification, and the nonthermal proton distribution (and, crucially, their feedback on each other). We synthesize both the thermal and nonthermal emission from Ly α and Ly β, the most promising lines that may exhibit a detectable signal. These new predictions are weaker and more transient than prior estimates, but the effects should be detectable in fortuitous circumstances. We degrade the Ly β emission to the resolution of the Spectral Imaging of the Coronal Environment (SPICE) instrument on board Solar Orbiter, demonstrating that though likely difficult, it should be possible to detect the presence of nonthermal protons in flares observed by SPICE.

Solar flares↗

On the estimation and detection for optical turbulent channels.

Consideration of the problem of filtering and detecting signals received through a turbulent channel at optical frequencies. Adopting the semiclassical method of quantum mechanics, application is made to the direct detection of a single-path optical communication channel where the received field is assumed to be the coherent signal field degraded by the atmospheric turbulence with a signal-independent, additive, zero-mean Gaussian background radiation.

Harger, R. O.↗

Lidar Luminance Quantizer

This innovation addresses challenges in lidar imaging, particularly with the detection scheme and the shapes of the detected signals. Ideally, the echoed pulse widths should be extremely narrow to resolve fine detail at high event rates. However, narrow pulses require wideband detection circuitry with increased power dissipation to minimize thermal noise. Filtering is also required to shape each received signal into a form suitable for processing by a constant fraction discriminator (CFD) followed by a time-to-digital converter (TDC). As the intervals between the echoes decrease, the finite bandwidth of the shaping circuits blends the pulses into an analog signal (luminance) with multiple modes, reducing the ability of the CFD to discriminate individual events

Quilligan, Gerard↗