Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shell effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Domes on Europa: The Role of Thermally Induced Compositional Diapirism

The surface of Europa is peppered by topographic domes, interpreted as sites of intrusion and extrusion. Diapirism is consistent with dome morphology, but thermal buoyancy alone cannot produce sufficient driving pressures to create the observed dome elevations. Instead, we suggest that diapirs may initiate by thermal convection that induces compositional segregation within Europa's ice shell. This double-diffusive convection scenario allows sufficient buoyancy for icy plumes to create the observed surface topography, if the ice shell has a very small effective elastic thickness (approximately 0.1 to 0.5 km) and contains low-eutectic-point impurities at the percent level. Thermal buoyancy, compositional buoyancy and double-diffusive convection are discussed.

Pappalardo, R. T.↗
NASA NTRS2018

Design of a Modular Monolithic Implicit Solver for Multi-Physics Applications

The design of a modular multi-physics high-order space-time finite-element framework is presented together with its extension to allow monolithic coupling of different physics. One of the main objectives of the framework is to perform efficient high- fidelity simulations of capsule/parachute systems. This problem requires simulating multiple physics including, but not limited to, the compressible Navier-Stokes equations, the dynamics of a moving body with mesh deformations and adaptation, the linear shell equations, non-re effective boundary conditions and wall modeling. The solver is based on high-order space-time - finite element methods. Continuous, discontinuous and C1-discontinuous Galerkin methods are implemented, allowing one to discretize various physical models. Tangent and adjoint sensitivity analysis are also targeted in order to conduct gradient-based optimization, error estimation, mesh adaptation, and flow control, adding another layer of complexity to the framework. The decisions made to tackle these challenges are presented. The discussion focuses first on the "single-physics" solver and later on its extension to the monolithic coupling of different physics. The implementation of different physics modules, relevant to the capsule/parachute system, are also presented. Finally, examples of coupled computations are presented, paving the way to the simulation of the full capsule/parachute system.

Carton De Wiart, Corentin↗
NASA NTRS1981

Cracked shells under skew-symmetric loading

The general problem of a shell containing a through crack in one of the principal planes of curvature and under general skew-symmetric loading is considered. By employing a Reissner type shell theory which takes into account the effect of transverse shear strains, all boundary conditions on the crack surfaces are satisfied separately. Consequently, unlike those obtained from the classical shell theory, the angular distributions of the stress components around the crack tips are shown to be identical to the distributions obtained from the plane and anti-plane elasticity solutions. Results are given for axially and circumferentially cracked cylindrical shells, spherical shells, and toroidal shells under uniform in-plane shearing, out of plane shearing, and torsion. The problem is formulated for specially orthostropic materials, therefore, the effect of orthotropy on the results is also studied.

Delale, F.↗
NASA NTRS1978

A computer program for analyzing unresolved Mossbauer hyperfine spectra

The program for analyzing unresolved Mossbauer hyperfine spectra was written in FORTRAN 4 language for the Control Data CYBER 170 series digital computer system with network operating system 1.1. With the present dimensions, the program requires approximately 36,000 octal locations of core storage. A typical case involving two innermost coordination shells in which the amplitudes and the peak positions of all three components were estimated in 25 iterations requires 30 seconds on CYBER 173. The program was applied to determine the effects of various near neighbor impurity shells on hyperfine fields in dilute FeAl alloys.

Schiess, J. R.↗
NASA NTRS2007

Cohesive Elements for Shells

A cohesive element for shell analysis is presented. The element can be used to simulate the initiation and growth of delaminations between stacked, non-coincident layers of shell elements. The procedure to construct the element accounts for the thickness offset by applying the kinematic relations of shell deformation to transform the stiffness and internal force of a zero-thickness cohesive element such that interfacial continuity between the layers is enforced. The procedure is demonstrated by simulating the response and failure of the Mixed Mode Bending test and a skin-stiffener debond specimen. In addition, it is shown that stacks of shell elements can be used to create effective models to predict the inplane and delamination failure modes of thick components. The results indicate that simple shell models can retain many of the necessary predictive attributes of much more complex 3D models while providing the computational efficiency that is necessary for design.

Davila, Carlos G.↗
NASA NTRS1994

The determination of the core mass at the helium flash in globular cluster stars

Evolutionary sequences for the red giant branch (RGB) phase of a representative globular cluster star have been computed in order to investigate the reliability of the current canonical values of the core mass M(sub c) at the helium flash. These computations were motivated by recent suggestions that the canonical values of M(sub c) may be systematically too small due to the numerical algorithms for shifting the hydrogen shell and advancing the chemical composition during the RGB phase. Our results show that these algorithms do not, in fact, introduce a significant error in the values of M(sub c). Moreover, we demonstrate that a procedure for advancing the chemical composition which is implicit only in the hydrogen abundance will systematically underestimate the amount of hydrogen fuel consumption between RGB models and therefore should not be used in RGB computations. Overall we estimate the uncertainty in the core masses of Sweigart & Gross (1978) due to numerical effects to be approximately equals 0.003 solar mass. From a consideration of the available canonical models we conclude that a change in the canonical values of M(sub c) by a few 10(exp -2) solar mass would require either a substantial change in the canonical input physics or some noncanonical effect such as rotation. Finally our models show that the use of short time steps can significantly increase the extent of the inner tail of the hydrogen shell. This effect may enhance the likelihood of hydrogen mixing following a helium shell flash in an asymptotic giant branch star.

Sweigart, Allen V.↗
NASA NTRS1949

Some New Problems on Shells and Thin Structures

Cylindrical shells of arbitrary section, reinforced by longitudinal and transverse members (stringers and ribs) are considered by us, for a sufficiently close spacing of the ribs, as in our previously published papers (references 1 end 2), as thin-walled orthotropic spatial systems at the cross-sections of which only axial (normal and shearing) forces can arise. The longitudinal bending and twisting moments, due to their weak effect on the stress state of the shell, are taken equal to zero. Along the longitudinal sections of the shell there may arise transverse forces in addition to the normal ~d shearing forces. Under the so-called static assumptions there is taken for the computation model of the shell a thin-walled spatial system consisting along its length (along a generator) of an infinite number of elementary strips capable of bending. Each of these strips is likened to a curved rod operating in each of its sections not only in tension (compression)but also in transverse bending and shear. The interaction between two adjoining transverse strips in the shell expresses itself in the transmission from one strip to the other of only the normal and shearing stresses. The static structure of the computation model here described is shown in figure 1, where the connections through which the normal and shearing stresses transmitted from one transverse strip to smother are indicated schematically by the rods located in the middle surface of the shell. In addition to the static hypothesis we introduce also geometric hypotheses. According to the latter the elongational deformations of the shell along lines parallel to the generator of its middle surface and the shear deformations in the middle surface, as ma+gitudes having . little effect on the state of the fundamental internal forces of the shell, are taken equal to zero. The deformations of the shell in our computational model are such that in the first place the lines of this surface perpendicular to the generator are inextensible at each point end in the second place the angles between the lines of principal curvature (the coordinate lines) which are straight before the deformation remain straight after the deformation.

Vlasov, V. S.↗
NASA NTRS2008

Assuring Life in Composite Systems

A computational simulation method is presented to assure life in composite systems by using dynamic buckling of smart composite shells as an example. The combined use of composite mechanics, finite element computer codes, and probabilistic analysis enable the effective assessment of the dynamic buckling load of smart composite shells. A universal plot is generated to estimate the dynamic buckling load of composite shells at various load rates and probabilities. The shell structure is also evaluated with smart fibers embedded in the plies right below the outer plies. The results show that, on the average, the use of smart fibers improved the shell buckling resistance by about 9% at different probabilities and delayed the buckling occurrence time. The probabilistic sensitivities results indicate that uncertainties in the fiber volume ratio and ply thickness have major effects on the buckling load. The uncertainties in the electric field strength and smart material volume fraction have moderate effects and thereby in the assured life of the shell.

Chamis, Christos c.↗
NASA NTRS2014

Mounting for Fabrication, Metrology, and Assembly of Full Shell Grazing Incidence Optics

Future x-ray telescopes will likely require lightweight mirrors to attain the large collecting areas needed to accomplish the science objectives. Understanding and demonstrating processes now is critical to achieving sub-arcsecond performance in the future. Consequently, designs not only of the mirrors but of fixtures for supporting them during fabrication, metrology, handling, assembly, and testing must be adequately modeled and verified. To this end, MSFC is using finite-element modeling to study the effects of mounting on full-shell grazing-incidence mirrors, during all processes leading to flight mirror assemblies. Here we report initial results of this study.

Roche, Jacqueline M.↗
NASA NTRS2010

Wavefront Sensing of X-Ray Telescopes

Phase Retrieval analysis of off-axis or defocused focal-plane data from telescope optics has been proven effective in understanding misalignments and optical aberrations in normal incidence telescopes. The approach is used, e.g., in commissioning of the James Webb Space Telescope (JWST) segmented primary mirror. There is a similar need for evaluating low-order figure errors of grazing incidence mirrors and nested telescope assemblies. When implemented in these systems, phase retrieval does not depend on normal incidence access to each mirror (shell) surface and, therefore, provides an effective means for evaluating nested x-ray telescopes during integration and test. We have applied a well-known phase retrieval algorithm to grazing incidence telescopes. The algorithm uses the Levenberg-Marquardt optimization procedure to perform a non-linear least-squares fit of the telescope Point Spread Function (PSF). The algorithm can also retrieve low order figure errors at visible wavelengths where optical diffraction is the dominant defect in the PSF. In this paper we will present the analytical approach and its implementation for grazing incidence mirrors of the International X-Ray Observatory (IXO). We analyze the effects of low order axial surface errors individually, and in combination on the system PSF at 633 nanometers. We demonstrate via modeling that the wavefront sensing algorithm can recover axial errors (of the grazing incidence mirrors) to a small fraction of the known axial figure errors using simulated PSFs as input data to the algorithm.

Saha, Timo↗
NASA NTRS1994

Structural design criteria for filament-wound composite shells

Advanced composite cylinders, manufactured by filament winding, provide a cost effective solution to many present structural applications; however, the compressive performance of filament-wound cylinders is lower than comparable shells fabricated from unidirectional tape. The objective of this study was to determine the cause of this reduction in thin filament-wound cylinders by relating the manufacturing procedures to the quality of the cylinder and to its compressive performance. The experiments on cylinder buckling were complemented by eigenvalue buckling analysis using a detailed geometric model in a finite element analysis. The applicability of classical buckling analyses was also investigated as a design tool.

Hahn, H. T.↗
NASA NTRS1977

Effect of end-ring stiffness on buckling of pressure-loaded stiffened conical shells

Buckling studies were conducted on truncated 120 deg conical shells having large end rings and many interior reinforcing rings that are typical of aeroshells used as spacecraft decelerators. Changes in base-end-ring stiffness were accomplished by simply machining away a portion of the base ring between successive buckling tests. Initial imperfection measurements from the test cones were included in the analytical model.

Davis, R. C.↗
NASA NTRS1985

The effect of source location on the structural-acoustic interaction of an infinite elastic shell

This paper deals with the response of an infinite elastic shell to simple acoustic sources (monopole and dipole). This simplified model is considered in order to gain insight into the characteristics of aircraft interior noise. The shell represents the aircraft fuselage and the sources are due to the propellor. Specifically, in this study the location of the source with respect to the cylinder is the major concern. How this affects acoustic line power, intensity flow into the shell and internal sound pressure is analyzed.

Kelly, J. J.↗
NASA NTRS1988

Effects of compressibility on the temperature jump at the interface of layered, spherical-shell convection

Large temperature jumps at the interface of layered convection are important to the argument used against the likelihood of separate circulations in the upper and lower mantles. This problem was studied within the framework of a compressible, constant viscosity spherical-shell model. Both mechanical and thermal coupling configurations are considered. Although the temperature jumps are reduced by compressibility, their magnitudes remain quite large, in the case of mechanical coupling. For thermal coupling, the temperature jumps become smaller but still are substantial, between 500 to 1000 C. In layered spherical-shell convection, flows in the lower mantle are several times greater than the surface velocities.

Yen, David A.↗
NASA NTRS1992

Postbuckling response of stiffened composite cylindrical shells

The local buckling and the associated postbuckling response of stiffened composite shells are studied using an asymptotic approach. Both the classical (Kirchhoff) theory (CPT) and a first-order shear deformation theory (SDT) are employed in the study. SDT analysis was carried out using p-version type finite strips, whereas CPT analysis employed h-version based strips. Convergence studies confirm the superiority of the p-version approach. A panel width-to-thickness ratio of 50 was chosen to investigate the influence of shear deformation for stiffened and isolated panels fabricated out of isotropic and composite layered materials. The shear deformation effects were significant for composite stiffened shell panels with CPT giving a noticeably stiffer response. In comparison with isotropic shell panels, orthotropic layered panels buckle at lower nondimensional buckling loads but are appreciably less sensitive to imperfection.

Sridharan, Srinivasan↗
NASA NTRS1993

SIRTF thermal design modifications to increase lifetime

An effort was made to increase the predicted lifetime of the SIRTF dewar by lowering the exterior shell temperature, increasing the radiated energy from the vapor cooled shields and reconfiguring the vapor cooled shields. The lifetime increases can be used to increase the scientific return from the mission and as a trade-off against mass and cost. This paper describes the configurations studied, the steady state thermal model used, the analytical methods and the results of the analysis. Much of the heat input to the outside dewar shell is radiative heat transfer from the solar panel. To lower the shell temperature, radiative cooled shields were placed between the solar panel and the dewar shell and between the bus and the dewar shell. Analysis showed that placing a radiator on the outer vapor cooled shield had a significant effect on lifetime. Lengthening the distance between the outer shell and the point where the vapor cooled shields are attached to the support straps also improved lifetime.

Petrick, S. W.↗