Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SURROGATE MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Forward and inverse predictive transient models of TREAT using surrogate reactivity models

In this work, we present two novel approaches for predicting the power evolution and control rod height of the Transient Reactor Test Facility (TREAT) to support experiment modeling; specifically, transient analysis of the NASA-sponsored Sirius series of experiments. These approaches utilize steady-state Monte Carlo model, point kinetics model, and surrogate models to predict power evolution and control rod axial position during transient experiments. Both approaches were tested and validated against several Sirius experiments that were performed in the TREAT facility at different power levels. The validation test results show very good agreement with the experimental data, and the models were able to accurately predict the power evolution and the axial control rod position with an average error within 3.0%. Finally, this indicates that these approaches will help the reactor engineering team of the TREAT facility in preparing and predicting the power and temperature of the experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

A Scientist-in-the-Loop Data Analytics Framework for Intelligent Simulation Model Tuning and Validation

This project developed a scientist-in-the-loop data analytics framework for intelligent simulation model tuning and validation, targeting the Weather Research and Forecasting (WRF) model and its solar energy variant, WRF-Solar-BNL. Domain experts, such as climate scientists, depend on large-scale numerical simulations for knowledge discovery and decision-making, yet the complexity of parameter tuning and the disconnect between automated optimization and domain expertise pose significant challenges. We extended an interactive visual analytics framework that enables domain experts to observe and intervene in the computational steering process by identifying disagreements between the simulation model, surrogate model, and the expert’s domain knowledge. Using Bayesian Optimization with Gaussian Process Regression as the surrogate model, our system allows users to probe parameter relationships, analyze correlation patterns, and adjust tuning parameters in real time. We developed use cases for solar irradiance forecasting through sustained collaboration with Brookhaven National Laboratory, resolving critical model configuration challenges and achieving meaningful reductions in prediction error. The project supported one PhD student, one MS student, and eight undergraduate students across three Data Science Capstone projects, resulting in one master’s thesis.

Dasgupta, Aritra [New Jersey Institute of Technolo↗
DOE OSTI2023

ORNL_AISD_DL-HLgap

This dataset provides supplementary molecular dataset of Deep Learning Workflow for the Inverse Design of Molecules with Specific Optoelectronic Properties. The dataset comprises three main directories such as GDB-9_dataset, Low_HL_Gap_dataset, and High_HL_Gap_dataset which individually has csv files, smiles_txt files, pdb files and xyz files containing information of molecular structures, properties and coordinates generated from deep learning workflow using generative model, surrogate model and DFTB calculation results. GDB-9_dataset contains the molecular data extracted from the original GDB-9 dataset with additional data of DFTB HL gap, surrogate HL gap and molecular property analysis. (the number of atoms, aromaticity and double bond equivalent) Low_HL_Gap_dataset and High_HL_Gap_dataset contains series of dataset for different generations with further split to train and test dataset that were obtained from the iterative workflow described in the manuscript. Additional directory Chemiscope_visualization in Low_HL_Gap_dataset directory contains compressed json files to visualize molecules using chemiscope.org page or application to help readers examine generated molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Sequential Bayesian Methods for Analyzing Computer Models

Efficient analysis of computer models is essential for the validation and uncertainty quantification of those models. Surrogate models, and Gaussian processes in particular, are a common and powerful approach to analyzing computer models that treat computer models as a black-box function. Gaussian processes form a Bayesian model over a space of functions that gives a measure of uncertainty about the computer model output at unobserved locations and a framework for sequential sampling. This tutorial will show how to fit Gaussian processes on a series of test functions and apply sequential design techniques to estimate extrema, level sets, and reliabilities of those test functions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Model-Free Voltage Control of Active Distribution System with PVs Using Surrogate Model-Based Deep Reinforcement Learning

Accurate knowledge of the distribution system topology and parameters is required to achieve good voltage control performance, but this is difficult to obtain in practice. This paper proposes a physical-model-free voltage control method based on a surrogate-model-enabled deep reinforcement learning approach. Specifically, a surrogate model is trained in a supervised manner using the recorded limited number of historical data to learn the relationship between the power injections and voltage fluctuations of each node. Then, the deep reinforcement learning algorithm is applied to learn an optimal control strategy from the experiences obtained by continuous interactions with the surrogate model. The proposed method can achieve physical-model-free control of unbalanced distribution network and inform real-time decisions to deal with fast voltage fluctuations caused by the rapid variation of PV generation. Simulation results on an unbalance IEEE 123-bus system show that the proposed method can achieve similar performance as that of perfect physical-model-based approaches while being advantageous over other traditional methods.

active distribution network↗
DOE OSTI2025

Aircraft in-situ measurements from SOCRATES constrain the anthropogenic perturbations of cloud droplet number

Aerosol-cloud interactions (ACI) in warm clouds alter reflected shortwave radiation by influencing cloud microphysical and macrophysical properties. The variable of state controlling ACI is the cloud droplet number concentration (N d ). Here, we examine the perturbations in N d due to anthropogenic aerosols (ΔN d, PD-PI ) using a perturbed parameter ensemble (PPE) hosted in the sixth Community Atmosphere Model (CAM6). Surrogate models are created for the CAM6 PPE outputs and are used to generate 1 million model variants of CAM6 by sampling 45 sources of parameter uncertainty. The range of uncertain physical parameters related to ACI are constrained with observations of aerosol and cloud properties from SOCRATES. The likely range of uncertain parameters and the associated range of ΔN d, PD-PI are more strongly constrained with observations of N d relative to observations of cloud condensation nuclei. We conduct sensitivity tests of how constraints on ΔN d, PD-PI are affected by systematic uncertainties in observations and our limitations in our surrogate models created for CAM6 PPE outputs. Based on this, we provide guidance on the impact of reducing systematic uncertainty in airborne microphysical observations and in surrogate models.

Song, Ci [Univ. of Wyoming, Laramie, WY (United St↗
DOE OSTI2025

A comparison of surrogate constitutive models for viscoplastic creep simulation of HT-9 steel

Mechanistic microstructure-informed constitutive models for the mechanical response of polycrystals are a cornerstone of computational materials science. However, as these models become increasingly more complex – often involving coupled differential equations describing the effect of specific deformation modes – their associated computational costs can become prohibitive, particularly in optimization or uncertainty quantification tasks that require numerous model evaluations. To address this challenge, surrogate constitutive models that balance accuracy and computational efficiency are highly desirable. Data-driven surrogate models, that learn the constitutive relation directly from data, have emerged as a promising solution. In this work, we develop two local surrogate models for the viscoplastic response of a steel: a piecewise response surface method and a mixture of experts model. These surrogates are designed to adapt to complex material behavior, which may vary with material parameters or operating conditions. The surrogate constitutive models are applied to creep simulations of HT-9 steel, an alloy of considerable interest to the nuclear energy sector due to its high tolerance to radiation damage, using training data generated from viscoplastic self-consistent (VPSC) simulations. In conclusion, we define a set of test metrics to numerically assess the accuracy of our surrogate models for predicting viscoplastic material behavior, and show that the mixture of experts model outperforms the piecewise response surface method in terms of accuracy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the transferability of residence time distributions in two 10-km long river sections with similar hydromorphic units

Quantifying hydrologic exchange fluxes (HEFs) at the stream-groundwater interface and their residence time distributions (RTDs) in the subsurface are important for managing the water quality and ecosystem health in dynamic river corridors. However, direct simulating high-spatial resolution HEFs and RTDs can be time-consuming, especially for watershed-scale modeling. Efficient surrogate models linking RTDs to hydromorphic units (HUs) can be alternatives for simulating RTDs in large-scale models. A common concern of these surrogate models, though, is the transferability of the relationship between the RTDs and HUs from one river corridor to another. To address this issue, this work evaluates the HEFs and resulting RTD-HU relationships for two 10-km long river corridors along the Columbia River leveraging a one-way coupled three-dimensional transient surface-subsurface water transport modeling framework we previously developed. Applying such a framework at the two river corridors with similar HUs allows for quantitative comparisons of HEFs and RTDs using both statistical tests and machine learning classification models. Finally, our comparison shows that the similarity and transferability of the RTD-HU relationship is very low for the two investigated river sections, which suggests that devising a general algorithm to estimate RTDs based solely on surface water hydrodynamics and short-distance river channel topography data, as well as HU classification, might be nearly impossible.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data and scripts associated with a manuscript on residence time distribution simulation in two 10-kilometer long river sections

This data package is associated with the publication “On the Transferability of Residence Time Distributions in Two 10-km Long River Sections with Similar Hydromorphic Units” submitted to the Journal of Hydrology (Bao et al. 2024).Quantifying hydrologic exchange fluxes (HEFs) at the stream-groundwater interface, along with their residence time distributions (RTDs) in the subsurface, is crucial for managing water quality and ecosystem health in dynamic river corridors. However, directly simulating high-spatial resolution HEFs and RTDs can be a time-consuming process, particularly for watershed-scale modeling. Efficient surrogate models that link RTDs to hydromorphic units (HUs) may serve as alternatives for simulating RTDs in large-scale models. One common concern with these surrogate models, however, is the transferability of the relationship between the RTDs and HUs from one river corridor to another. To address this, we evaluated the HEFs and the resulting RTD-HU relationships for two 10-kilometer-long river corridors along the Columbia River, using a one-way coupled three-dimensional transient surface-subsurface water transport modeling framework that we previously developed. Applying this framework to the two river corridors with similar HUs allows for quantitative comparisons of HEFs and RTDs using both statistical tests and machine learning classification models. This data package includes the model inputs files and the simulation results data. This data package contains 10 folders. The modeling simulation results data are in the folders 100H_pt_data and 300area_pt_data, for the study domain Hanford 100H and 300 area respectively. The remaining eight folders contain the scripts and data to generate the manuscript figures. The file-level metadata file (Bao_2024_Residence_Time_Distribution _flmd.csv) includes a list of all files contained in this data package and descriptions for each. The data dictionary file (Bao_2024_Residence_Time_Distribution _dd.csv) includes column header definitions and units of all tabular files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Accelerating Scientific Simulations with Bi-Fidelity Weighted Transfer Learning

High-fidelity modeling is an essential design tool for many engineering applications. However, for complex systems, computational cost can be a limiting factor. Analyzing parameter sensitivity, uncertainty quantification, and design optimization require many model evaluations. Surrogate models are often used to develop the relationship between model parameters and quantities of interest. However, in the case of complex systems, surrogate models require several degrees of freedom and, thus, a large number of data points to determine the correct dependencies. For many applications, this may be prohibitively expensive. The reduction of computational requirements can be achieved by leveraging low-fidelity models. Low-fidelity models represent the system at a coarser resolution with the advantage of computational efficiency. Therefore, a bi-fidelity modeling paradigm, which augments the accuracy of a low-fidelity model in a computationally efficient manner by invoking limited runs of a high-fidelity model, can be leveraged to sufficiently balance the accuracy and computational requirements. In this work, a bi-fidelity weighted transfer learning method using neural networks was applied to a computational fluid dynamics heat transfer modeling problem. The transfer learning advantage was investigated as a function of hyperparameters. Our main finding is that the use of a bi-fidelity modeling paradigm achieves accuracy close to that of a high-fidelity Gaussian process model while significantly reducing computational cost. The bi-fidelity model achieves comparable performance with 90 high-fidelity samples-that is, 60% less than the samples needed to achieve similar accuracy without the use of bi-fidelity modeling,

Borowiec, Katarzyna↗
DOE OSTI2024

Rapid Inverse Parameter Inference Using Physics-Informed Neural Network

As Li-ion batteries become more essential in today's economy, tools need to be developed to accurately and rapidly diagnose a battery's internal state-of-health. Using a Li-ion battery's (high-rate) voltage response, it is proposed to determine a battery's internal state through Bayesian calibration. However, Bayesian calibration is notoriously slow and requires thousands of model runs. To accelerate parameter inference using Bayesian calibration, a surrogate model is developed to replace the underlying physics-based Li-ion model. Developing a surrogate model for rapid Bayesian calibration analysis is discussed for both the single particle model (SPM) and the pseudo two-dimensional (P2D) model. Surrogate models are constructed using physics-informed neural networks (PINNs) that encode the influence of internal properties on observed voltage responses. In practice, a neural network can be trained by: 1) using simulation results of the physics-based model (i.e., a data-loss approach); 2) using the residuals of the governing equations themselves (i.e., a physics-loss approach); or 3) using a combination of simulation results and governing equation residuals. In the present work, PINNs are developed using a variety of training losses and neural network architectures. In this analysis, it is shown that a PINN surrogate model can be reliably trained with only physics-informed loss. However, using a coupled data-informed and physics-loss approach produced the most accurate PINNs.

Bayesian calibration↗
DOE OSTI2025

Deep Learning–Assisted Multiobjective Optimization of Geological CO 2 Storage Performance under Geomechanical Risks

In geological CO 2 storage, designing the optimal well control strategy for CO 2 injection to maximize CO 2 storage while minimizing the associated geomechanical risks is not trivial. This challenge arises due to pressure buildup, CO 2 plume migration, the highly nonlinear nature of geomechanical responses to rock-fluid interaction, and the high computational cost associated with coupled flow and geomechanics simulations. In this paper, we introduce a novel optimization framework to address these challenges. The optimization problem is formulated as follows: maximize total CO 2 storage while minimizing geomechanical risks by adjusting the injection schedules within bounded constraints. The geomechanical risks are primarily driven by injection-induced pressure build-up, which is characterized by ground displacement and the induced microseismicity. We used the Fourier neural operator (FNO)-based deep learning model to construct surrogate models, replacing the time-consuming coupled flow and geomechanics simulations for evaluating the aforementioned objective functions. The developed surrogate models have been incorporated into a multiobjective optimization framework through a genetic algorithm to reduce the computational burden. The proposed optimization framework reduces the computational cost from approximately 2,400 hours, when using objective function evaluations based on physics-based simulations, to around 20 minutes. A set of Pareto-optimal solutions of the proposed workflow yields nontrivial optimal decisions, reducing the microseismicity potential and the vertical displacement. This Pareto front highlights the optimal trade-offs between CO 2 storage amount, safety, and ground displacement, emphasizing the need for careful optimization and management of injection strategies to achieve a balanced outcome. The novelty of this work is twofold. First, we demonstrate the importance of incorporating the minimization of the geomechanical risks as objective functions into the CO 2 storage optimization workflow to mitigate the potential risk of induced microseismicity and ground displacement. Second, we leverage the FNO-based surrogate models to optimize a real-field CO 2 storage operation.

42 ENGINEERING↗
DOE OSTI2022

Calibrating hypersonic turbulence flow models with the HIFiRE-1 experiment using data-driven machine-learned models.

In this paper we study the efficacy of combining machine-learning methods with projection-based model reduction techniques for creating data-driven surrogate models of computationally expensive, high-fidelity physics models. Such surrogate models are essential for many-query applications e.g., engineering design optimization and parameter estimation, where it is necessary to invoke the high-fidelity model sequentially, many times. Surrogate models are usually constructed for individual scalar quantities. However there are scenarios where a spatially varying field needs to be modeled as a function of the model’s input parameters. Here we develop a method to do so, using projections to represent spatial variability while a machine-learned model captures the dependence of the model’s response on the inputs. The method is demonstrated on modeling the heat flux and pressure on the surface of the HIFiRE-1 geometry in a Mach 7.16 turbulent flow. The surrogate model is then used to perform Bayesian estimation of freestream conditions and parameters of the SST (Shear Stress Transport) turbulence model embedded in the high-fidelity (Reynolds-Averaged Navier–Stokes) flow simulator, using shock-tunnel data. The paper provides the first-ever Bayesian calibration of a turbulence model for complex hypersonic turbulent flows. We find that the primary issues in estimating the SST model parameters are the limited information content of the heat flux and pressure measurements and the large model-form error encountered in a certain part of the flow.

42 ENGINEERING↗
DOE OSTI2023

Conditional Karhunen–Loève regression model with Basis Adaptation for high-dimensional problems: Uncertainty quantification and inverse modeling

Here, we propose a methodology for improving the accuracy of surrogate models of the observable response of physical systems as a function of the systems’ spatially heterogeneous parameter fields, with applications to uncertainty quantification and parameter estimation in high-dimensional problems. Practitioners often formulate finite-dimensional representations of spatially heterogeneous parameter fields using truncated unconditional Karhunen–Loève expansions (KLEs) for a certain choice of unconditional covariance kernel and construct surrogate models of the observable response with respect to the KLE coefficients. When direct measurements of the parameter fields are available, we propose improving the accuracy of these surrogate models by representing the parameter fields via conditional Karhunen-Loève expansions (CKLEs). CKLEs are constructed by conditioning the covariance kernel of the unconditional expansion on the direct measurements of the parameter field via Gaussian process regression, and then truncating the corresponding KLE. We apply the proposed methodology to constructing surrogate models via the Basis Adaptation (BA) method of the stationary hydraulic head response, measured at spatially discrete observation locations, of a groundwater flow model of the Hanford Site, as a function of the 1000-dimensional representation of the model’s log-transmissivity field. We find that BA surrogate models of the hydraulic head based on CKLEs are more accurate than BA surrogate models based on unconditional expansions for forward uncertainty quantification tasks. Furthermore, we find that inverse estimates of the hydraulic transmissivity field computed using CKLE-based BA surrogate models are more accurate than those computed using unconditional BA surrogate models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Machine learning for surrogate process models of bioproduction pathways

Technoeconomic analysis and life-cycle assessment are critical to guiding and prioritizing bench-scale experiments and to evaluating economic and environmental performance of biofuel or biochemical production processes at scale. Traditionally, commercial process simulation tools have been used to develop detailed models for these purposes. However, developing and running such models can be costly and computationally intensive, which limits the degree to which they can be shared and reproduced in the broader research community. This study evaluates the potential of an automated machine learning approach to develop surrogate models based on conventional process simulation models. The analysis focuses on several high-value biofuels and bioproducts for which pathways of production from biomass feedstocks have been well-established. The results demonstrate that surrogate models can be an accurate and effective tool for approximating the cost, mass and energy balance outputs of more complex process simulations at a fraction of the computational expense.

09 BIOMASS FUELS↗
DOE OSTI2022

Application of machine learning and artificial intelligence to extend EFIT equilibrium reconstruction

Recent progress in the application of machine learning (ML)/artificial intelligence (AI) algorithms to improve the Equilibrium Fitting (EFIT) code equilibrium reconstruction for fusion data analysis applications is presented. A device-independent portable core equilibrium solver capable of computing or reconstructing equilibrium for different tokamaks has been created to facilitate adaptation of ML/AI algorithms. A large EFIT database comprising of DIII-D magnetic, motional Stark effect, and kinetic reconstruction data has been generated for developments of EFIT model-order-reduction (MOR) surrogate models to reconstruct approximate equilibrium solutions. Furthermore, a neural-network MOR surrogate model has been successfully trained and tested using the magnetically reconstructed datasets with encouraging results. Other progress includes developments of a Gaussian process Bayesian framework that can adapt its many hyperparameters to improve processing of experimental input data and a 3D perturbed equilibrium database from toroidal full magnetohydrodynamic linear response modeling using the Magnetohydrodynamic Resistive Spectrum - Feedback (MARS-F) code for developments of 3D-MOR surrogate models.

Gaussian process↗
DOE OSTI2026

JetGP: A derivative enhanced Gaussian process library

Derivative enhanced Gaussian Processes (DEGPs) can significantly improve surrogate model accuracy over standard Gaussian Process (GP) formulations by incorporating derivative information. However, standard implementations scale poorly with dimension, limiting their use in high dimensional engineering problems. JetGP is a Python framework that unifies existing derivative enhanced GP methodologies into a single library and extends them to support arbitrary order derivative information. The library implements four complementary formulations: standard derivative enhanced Gaussian Processes (DEGP), directional DEGP (DDEGP), generalized directional DEGP (GDDEGP), and weighted DEGP (WDEGP). By unifying these approaches in a consistent interface with robust numerical implementations, JetGP enables practitioners to balance predictive accuracy and computational efficiency for high dimensional optimization, uncertainty quantification, and sensitivity analysis in engineering design.

Derivative enhanced Gaussian process↗