Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SURFACE DISTORTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Suppression of electroconvective and morphological instabilities by an imposed cross flow of the electrolyte

Electroconvective (EC) instability and its influence on surface morphological perturbations (Morph) are important in many applications, including electrodialysis, batteries, and fuel cells. In this work, we study the effects of a two-dimensional channel flow on the EC and Morph instabilities using two approaches. In the bulk analysis, we derive the asymptotic solutions for small and large wave numbers by neglecting the space charge layer and imposing a second kind electroosmosis slip velocity boundary condition on the electroneutral bulk region. In the full analysis, the instability of the entire region of the liquid electrolyte is analyzed using the ultraspherical spectral method. Both studies show that the flow significantly affects the EC instability. The imposed flow distorts the concentration field, causing a sheltering effect which hinders the ion transport from low- to high-concentration regions, and therefore suppresses the EC instability below a certain wave number. In combination with the viscous stabilization of the high wave number modes by the space charge layer, a sufficiently strong imposed flow can fully suppress the EC instability. The increment in the critical voltage for the instability onset is roughly proportional to the square root of the product of imposed velocity and double layer thickness. The imposed flow has a smaller effect on the Morph instability, except that it may remove the morphological modes resulting from the EC instability and thereby change the wave number of the most unstable mode.

42 ENGINEERING↗
DOE OSTI2020

Effects of Vegetation and Topography on the Boundary Layer Structure above the Amazon Forest

Observational data from two field campaigns in the Amazon forest were used to study the vertical structure of turbulence above the forest. The analysis was performed using the reduced turbulent kinetic energy (TKE) budget and its associated two-dimensional phase space. Results revealed the existence of two regions within the roughness sublayer in which the TKE budget cannot be explained by the canonical flat-terrain TKE budgets in the canopy roughness sublayer or in the lower portion of the convective ABL. Data analysis also suggested that deviations from horizontal homogeneity have a large contribution to the TKE budget. Results from LES of a model canopy over idealized topography presented similar features, leading to the conclusion that flow distortions caused by topography are responsible for the observed features in the TKE budget. These results support the conclusion that the boundary layer above the Amazon forest is strongly impacted by the gentle topography underneath.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Emergent ferromagnetism and insulator-metal transition in δ-doped ultrathin ruthenates

Abstract Heterostructures of complex transition metal oxides are known to induce extraordinary emergent quantum states that arise from broken symmetry and other discontinuities at interfaces. Here we report the emergence of unusual, thickness-dependent properties in ultrathin CaRuO 3 films by insertion of a single isovalent SrO layer (referred to as δ-doping). While bulk CaRuO 3 is metallic and nonmagnetic, films thinner than or equal to ~15-unit cells (u.c.) are insulating though still nonmagnetic. However, δ-doping to middle of such CaRuO 3 films induces an insulator-to-metal transition and unusual ferromagnetism with strong magnetoresistive behavior. Atomically resolved imaging and density-functional-theory calculations reveal that the whole δ-doped film preserves the bulk-CaRuO 3 orthorhombic structure, while appreciable structural and electronic changes are highly localized near the SrO layer. The results highlight delicate nature of magnetic instability in CaRuO 3 and subtle effects that can alter it, especially the role of A-site cation in electronic and magnetic structure additional to lattice distortion in ruthenates. It also provides a practical approach to engineer material systems via highly localized modifications in their structure and composition that may offer new routes to the design of oxide electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Li x (C 5 H 5 N) y Fe 2– z Se 2 : A Defect-Resilient Expanded-Lattice High-Temperature Superconductor

Two-dimensional iron chalcogenide intercalates display a remarkable correlation of the interlayer spacing with enhancement of the superconducting critical temperature (T c ). In this work, synchrotron X-ray absorption (XAS; at the Fe and Se K-edges) and emission (XES; at the Fe Κβ) spectroscopies allow one to discuss how the important rise of T c (~44 K) in the molecule-intercalated Li x (C 5 H 5 N) y Fe 2-z Se 2 relates to the electronic and local structural changes felt by the inorganic host upon doping (x). XES shows that widely separated layers of edge-sharing FeSe 4 tetrahedra carry low-spin moieties, with a local Fe magnetic moment slightly reduced compared to the parent β-Fe 2-z Se 2 . Pre-edge XAS expresses the progressively reduced mixing of metal 3d-4p states upon lithiation. Doping-mediated local lattice modifications, probed by conventional T c optimization measures (cf. the anion height and FeSe 4 tetrahedra regularity), become less relevant when layers are spaced far away. On the basis of extended X-ray absorption fine structure, such distortions are compensated by a softer Fe network that relates to Fe-site vacancies, alleviating electron-lattice correlations and superconductivity. Density functional theory (DFT) guided modification of the isolated Fe 2-z Se 2 (z, vacant sites) planes, resembling the host layers, identify that Fe-site deficiency occurs at low energy cost, giving rise to stretched Fe sheets, in accordance with experiments. Here, the robust high-T c in Li x (C 5 H 5 N) y Fe 2-z Se 2 , arises from the interplay of electron-donating spacers and the iron selenide layer's tolerance to defect chemistry, a tool to favorably tune its Fermi surface properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Topologically trivial gap-filling in superconducting Fe(Se,Te) by one-dimensional defects

Abstract Structural distortions and imperfections are a crucial aspect of materials science, on the macroscopic scale providing strength, but also enhancing corrosion and reducing electrical and thermal conductivity. At the nanometre scale, multi-atom imperfections, such as atomic chains and crystalline domain walls have conversely been proposed as a route to topological superconductivity, whose most prominent characteristic is the emergence of Majorana Fermions that can be used for error-free quantum computing. Here, we shed more light on the nature of purported domain walls in Fe(Se,Te) that may host 1D dispersing Majorana modes. We show that the displacement shift of the atomic lattice at these line-defects results from sub-surface impurities that warp the topmost layer(s). Using the electric field between the tip and sample, we manage to reposition the sub-surface impurities, directly visualizing the displacement shift and the underlying defect-free lattice. These results, combined with observations of a completely different type of 1D defect where superconductivity remains fully gapped, highlight the topologically trivial nature of 1D defects in Fe(Se,Te).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Local Distortions and Metal–Semiconductor–Metal Transition in Quasi-One-Dimensional Nanowire Compounds AV 3 Q 3 O δ (A = K, Rb, Cs and Q = Se, Te)

Metal cluster compounds have garnered renewed interest in the search for novel superconductors and topological semimetals owing to structural instabilities of metal-cluster geometries and broken symmetries. Here we synthesized needle-like crystals of the V-cluster-based quasi-one-dimensional (Q1D) materials AV 3 Q 3 O δ (A = K, Rb, Cs, Q= Se, Te) which can also be viewed as being composed of parallel nanowires. We examine how changes in their average and local structure control their electronic properties. All compounds crystallize in the TIFe 3 Te 3 -type structure (P6 3 /m space group) with infinite (V 3 )Q 3 ) - double-walled columnar chains separated by A + cations. Our single-crystal and synchrotron powder diffraction studies indicate oxygen atoms partially occupy the center site of the V 6 octahedral metal cluster cages in KV 3 Te 3 O 0.33 , RbV 3 Te 3 O 0.32 , and CsV 3 Te 3 O 0.35 , whereas KV 3 Se 3 is structurally oxygen-free. Our synchrotron X-ray pair distribution function (PDF) analyses indicate that the oxygen-free V 6 cluster octahedra in KV 3 Se 3 are highly distorted perpendicular to the chain direction even at room temperature, reducing the symmetry of the average structure from hexagonal P6 3 /m to monoclinic P2 1 /m. Our theoretical calculation supports this P2 1 /m distortion and suggests the structure further distorts to P2 1 or P2 1 /c at lower temperatures. In contrast, the oxygen-centered V-cluster in KV 3 Te 3 O 0.33 exhibits a V-3-triangle-trimerization along the chain direction. This feature is discernible from the local PDF and is consistent with lattice dynamical calculations based on density functional theory. Resistivity measurements indicate that KV 3 Se 3 exhibits metallic behavior, whereas a dramatic metal-semiconductor-metal transition emerges in KV 3 Te 3 O 6.33 , RbV 3 Te 3 O 0.32 , and CsV 3 Te 3 O 0.35 because of oxygen disorder and changes in local structure captured from our electronic structure analyses of the Fermi surface. Our investigation of the AV 3 Q 3 O 6 family demonstrates the importance of understanding local changes in structure driven by electronic instabilities, which can guide the search for new quantum materials in other low-dimensional cluster-compound materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Orbital selective band re-normalization induced Lifshitz transition in TiSe 2

A Lifshitz transition is a sudden change in Fermi surface topology, often linked to quantum phenomena, with major impact on transport and sometimes superconductivity. Here we demonstrate a Lifshitz transition in TiSe 2 using micro–angle-resolved photoemission spectroscopy. At low temperatures an electron pocket appears at the Brillouin-zone center, whereas at higher temperatures spectral weight from a hole-like valence band dominates the Fermi level. Unlike previously reported cases typically driven by rigid band shifts, in TiSe 2 an orbital-selective strong band renormalization induces the crossover near 160 K. This mechanism naturally explains the longstanding resistivity anomaly of TiSe 2 , which peaks around 160 K. Our results clarify its puzzling transport behavior and open avenues to investigate how periodic lattice distortions interact with strong electronic correlations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Lamellar and Hexagonal Assemblies of PEG-Grafted Silver Nanoparticles: Implications for Plasmonics and Photonics

Assembly of silver nanoparticles (AgNPs) grafted with thiolated poly(ethylene glycol) (PEG-SH) with various molecular weights is reported. Synchrotron-based X-ray surface-sensitive diffraction methods are used to determine the nature of two-dimensional (2D) assemblies at liquid/vapor interfaces, and small-angle X-ray scattering (SAXS) is used to monitor the three-dimensional (3D) assemblies in bulk suspensions. We find that assembly can be induced either by the addition of K 2 CO 3 or polyacrylic acid (PAA) to the PEG-AgNP aqueous suspensions. The addition of K 2 CO 3 induces a 2D hexagonal structure at the liquid/vapor interface and a 3D hexagonal columnar structure in solutions, where the columns consist of tethered PEG-AgNP chains. On the other hand, the addition of PAA leads to the formation of a 2D lamella-like distorted hexagonal sheet at the liquid/vapor interface and a 3D lamellar superstructure formed by stacked 2D sheets in the PEG-AgNP suspension. Effects of the core type of nanoparticles on the assembly can be used to control structures for potential applications in plasmonics and photonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Improving thermodynamic nudging in the E3SM Atmosphere Model version 2 (EAMv2): strategy and hindcast skills on weather systems

Nudging techniques are commonly employed to constrain atmospheric simulations toward observed states, facilitating model evaluation and sensitivity studies. However, if applied improperly – particularly to thermodynamic variables such as temperature and humidity – nudging can distort physical processes and introduce spurious biases, undermining the credibility of the simulations. This study presents an improved nudging implementation that applies vertically modulated tendencies to reduce adverse impacts on model physics. The framework is tested in version 2 of the Energy Exascale Earth System Model (EAMv2) using a suite of hindcast simulations nudged toward ERA5 reanalysis. We systematically evaluate the individual and combined effects of nudging wind, temperature, and humidity fields on the model's ability to represent large-scale atmospheric states and high-impact weather systems. Results show that the revised strategy – particularly when nudging temperature and humidity at selected levels – enhances hindcast skill by improving agreement with ERA5 without degrading the hydrological cycle or precipitation processes. Additional improvements in surface temperature, outgoing longwave radiation, and precipitation biases are achieved through targeted nudging of land-surface variables. The proposed approach strengthens the representation of large-scale conditions relevant to tropical cyclones, atmospheric rivers, and extratropical cyclones in the low-resolution EAMv2. These findings demonstrate that carefully designed thermodynamic nudging, especially of temperature and humidity, improves the realism of constrained simulations and broadens the utility of nudged EAMv2 for atmospheric modeling, machine learning, and high-impact weather research.

Atmospheric river↗
DOE OSTI2024

Safety First: Stability and Dissipation of Line-tied Force-free Flux Tubes in Magnetized Coronae

Abstract Magnetized plasma columns and extended magnetic structures with both footpoints anchored to a surface layer are an important building block of astrophysical dissipation models. Current loops shining in X-rays during the growth of plasma instabilities are observed in the corona of the Sun and are expected to exist in highly magnetized neutron star magnetospheres and accretion disk coronae. For varying twist and system sizes, we investigate the stability of line-tied force-free flux tubes and the dissipation of twist energy during instabilities using linear analysis and time-dependent force-free electrodynamics simulations. Kink modes ( m = 1) and efficient magnetic energy dissipation develop for plasma safety factors q ≲ 1, where q is the inverse of the number of magnetic field line windings per column length. Higher-order fluting modes ( m > 1) can distort equilibrium flux tubes for q > 1 but induce significantly less dissipation. In our analysis, the characteristic pitch μ ˜ 0 of flux-tube field lines determines the growth rate ( ∝ μ ˜ 0 3 ) and minimum wavelength of the kink instability ( ∝ μ ˜ 0 − 1 ). We use these scalings to determine a minimum flux tube length for the growth of the kink instability for any given μ ˜ 0 . By drawing analogies to idealized magnetar magnetospheres with varying regimes of boundary shearing rates, we discuss the expected impact of the pitch-dependent growth rates for magnetospheric dissipation in magnetar conditions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Evaluation of subsurface transport processes of delayed gas signatures applicable to underground nuclear explosions

Radioactive gas signatures from underground nuclear explosions (UNEs) result from gas-migration processes occurring in the subsurface. The processes considered in this study either drive or retard upward migration of gases from the detonation cavity. The relative importance of these processes is evaluated by simulating subsurface transport in a dual-permeability medium for the multi-tracer Noble Gas Migration Experiment (NGME) originally intended to study some aspects of transport from a UNE. For this experiment, relevant driving processes include weak two-phase convection driven by the geothermal gradient, over pressuring of the detonation cavity, and barometric pumping while gas sorption, dissolution, radioactive decay, and usually diffusion represent retarding processes. From deterministic simulations we found that over-pressuring of the post-detonation chimney coupled with barometric pumping produced a synergistic effect amplifying the tracer-gas reaching the surface. Bounding simulations indicated that the sorption and dissolution of gases, tending to retard transport, were much smaller than anticipated by earlier laboratory studies. The NGME observations themselves show that differences in gas diffusivity have a larger effect on influencing upward transport than do the combined effects of tracer-gas sorption and dissolution, which is consistent with a Sobol’ sensitivity analysis. Both deterministic simulations and those considering parametric uncertainties of transport-related properties predict that the excess in concentration of SF 6 compared to 127 Xe as might be captured in small volumetric samples should be much smaller than the order-of-magnitude contrast found in the large-volume gas samples taken at the site. While extraction of large-volume subsurface gas samples is shown to be capable of distorting in situ gas compositions, the highly variable injection rate of SF 6 into the detonation cavity relative to that of 127 Xe at the start of the field experiment is the most likely explanation for the large difference in observed concentrations.

58 GEOSCIENCES↗
DOE OSTI2025

Anisotropic structure and optical engineering of strontium titanate and zirconia responding to sequential hydrogen and helium irradiation

Unraveling the correlation between strain engineering with anisotropic optical properties via nanoscale defects gradually evolved into a strategy for fundamental studies and technological applications, yet it remains understudied in functional complex oxides compared to metals and semiconductors. Here, the methodology of strain engineering for the determination of the lattice parameters, parallel/normal to the sample surface, in the individual layers of single-crystalline superlattices is derived, which is based on analysis of high-angle X-ray diffraction measurements in combination with diffraction reciprocal space mapping. With modeling that takes into account the effect of elastic properties, two elastically anisotropic materials, SrTiO 3 and ZrO 2 , have been compared in terms of defect-induced elastic strain caused by individual and sequential H + and He 2+ irradiation. The anisotropic lattice swelling with corresponding refractive index, and obstructive behavior of elastic strain recovery are demonstrated in SrTiO 3 , while approaching strain behaviors accompanied by isotropic refractive index distribution in both orientations are confirmed in ZrO 2 . Under sequential He 2+ /H + irradiation, pre-existing He-vacancy complexes acted as vacancy traps, preferentially capturing H + clusters to induce lattice distortion and enhance absorption. Nanohardness increments (ΔH) calculated by the DBH model matched nanoindentation results, confirming that sequential irradiation generated higher indentation yield stress than individual irradiations.

Anisotropic expansion↗
DOE OSTI2021

Li + Diffusion in Amorphous and Crystalline Al 2 O 3 for Battery Electrode Coatings

Al 2 O 3 is often applied protectively to lithium-ion battery anode and cathode materials to inhibit surface degradation, suppress dendrite formation, and relieve mechanical stresses. Given the very high intrinsic band gap and diffusion barrier of the material, the mechanism that allows Li diffusion through these coatings is not well understood, and widely varying laboratory results indicate that there may be dependencies on morphology and stoichiometry. Using nudged elastic band calculations and ab initio molecular dynamics, we perform a systematic investigation across Al 2 O 3 structures, both crystalline and amorphous, and at various concentrations of Li + to uncover the optimal parameters for maximally diffusive coatings. We find a correlation between the low proximity of Li + to Al 3+ and the low Li + migration barrier. Although barriers are the lowest in the highly diffusive one-dimensional channels of crystalline θ-Al 2 O 3 , the system is structurally delicate and subject to detrimental distortion as the Li + content is increased. The α-Al 2 O 3 lattice is, conversely, highly stable against distortion at all Li + concentrations but disadvantageous for Li + migration. In amorphous systems, unscreened Li + –Li + Coulomb repulsion and pre-emptive occupation of “trapping sites” combine to lower the energy barriers as a function of increasing concentration. One of our most important findings is that Al-deficient materials can sharply increase Li + movement, and we predict that an amorphous material with a combination of high Li + concentration and Al deficiency would enable highly Li + -conductive protective coatings for electrodes.

25 ENERGY STORAGE↗
DOE OSTI2021

An antisite defect mechanism for room temperature ferroelectricity in orthoferrites

Single-phase multiferroic materials that allow the coexistence of ferroelectric and magnetic ordering above room temperature are highly desirable, motivating an ongoing search for mechanisms for unconventional ferroelectricity in magnetic oxides. Here, we report an antisite defect mechanism for room temperature ferroelectricity in epitaxial thin films of yttrium orthoferrite, YFeO 3 , a perovskite-structured canted antiferromagnet. A combination of piezoresponse force microscopy, atomically resolved elemental mapping with aberration corrected scanning transmission electron microscopy and density functional theory calculations reveals that the presence of Y Fe antisite defects facilitates a non-centrosymmetric distortion promoting ferroelectricity. This mechanism is predicted to work analogously for other rare earth orthoferrites, with a dependence of the polarization on the radius of the rare earth cation. Our work uncovers the distinctive role of antisite defects in providing a mechanism for ferroelectricity in a range of magnetic orthoferrites and further augments the functionality of this family of complex oxides for multiferroic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhanced Interface-Driven Perpendicular Magnetic Anisotropy by Symmetry Control in Oxide Superlattices

Perpendicular magnetic anisotropy (PMA) has recently been shown to emerge at interfaces of 3d and 5d transition-metal oxides (TMOs). However, strategies to systematically stabilize such interface-driven PMA still remains elusive, hindering further applications of this design approach. Here, tuning crystal symmetry is shown to be an effective means to engineer this interfacial phenomenon. The evolution of PMA strength as a function of ferromagnetic oxide thickness quantitatively reveals the competition between volume- and interface-specific contributions that determine the magnetic anisotropy. By applying different degrees of epitaxial strain, the relative contributions to PMA are modulated, clearly revealing their correlations with crystal symmetries. To be more specific, the volume anisotropy energy is found to be correlated with the tetragonal distortion of the ferromagnetic layer, while the interface anisotropy energy is mainly modulated by the octahedral tilting at the interface. With these insights, superlattices with enhanced interface-driven PMA and higher Curie temperature are realized. These findings reveal a route to engineering interface-driven PMA and associated magnetic phenomena in TMO heterostructures for future spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

The Extraordinary March 2022 East Antarctica “Heat” Wave. Part II: Impacts on the Antarctic Ice Sheet

Abstract Between 15 and 19 March 2022, East Antarctica experienced an exceptional heat wave with widespread 30°–40°C temperature anomalies across the ice sheet. In Part I, we assessed the meteorological drivers that generated an intense atmospheric river (AR) that caused these record-shattering temperature anomalies. Here, we continue our large collaborative study by analyzing the widespread and diverse impacts driven by the AR landfall. These impacts included widespread rain and surface melt that was recorded along coastal areas, but this was outweighed by widespread high snowfall accumulations resulting in a largely positive surface mass balance contribution to the East Antarctic region. An analysis of the surface energy budget indicated that widespread downward longwave radiation anomalies caused by large cloud-liquid water contents along with some scattered solar radiation produced intense surface warming. Isotope measurements of the moisture were highly elevated, likely imprinting a strong signal for past climate reconstructions. The AR event attenuated cosmic ray measurements at Concordia, something previously never observed. Last, an extratropical cyclone west of the AR landfall likely triggered the final collapse of the critically unstable Conger Ice Shelf while further reducing an already record low sea ice extent. Significance Statement Using our diverse collective expertise, we explored the impacts from the March 2022 heat wave and atmospheric river across East Antarctica. One key takeaway is that the Antarctic cryosphere is highly sensitive to meteorological extremes originating from the midlatitudes and subtropics. Despite the large positive temperature anomalies driven from strong downward longwave radiation, this event led to huge amounts of snowfall across the Antarctic interior desert. The isotopes in this snow of warm airmass origin will likely be detectable in future ice cores and potentially distort past climate reconstructions. Even measurements of space activity were affected. Also, the swells generated from this storm helped to trigger the final collapse of an already critically unstable Conger Ice Shelf while further degrading sea ice coverage.

Wille, Jonathan D.↗
DOE OSTI2024

Binary pseudo-random array standards for calibration of 3D optical surface profilers used for metrology with significantly curved x-ray optics

High-accuracy metrology is vitally important in manufacturing ultra-high-quality free-form mirrors designed to manipulate X-ray light with nanometer-scale wavelengths. The current capabilities and possibility for improvements in X-ray mirror manufacturing are limited by inherent imperfections of the integrated metrology tools. In the case of Fizeau interferometry, metrology tools are currently calibrated with super-polished flat test-standard/reference mirrors. This is acceptable for measuring slightly curved X-ray optics. However, for even moderately curved aspherical X-ray mirrors the flat-reference calibration is not sufficiently accurate and stitching Fizeau interferometer-based surface metrology is used to mitigate the problem. But still, the retrace and aberration errors, as well as the limited spatial resolution, described with the instrument transfer function (ITF), can be transferred into the optical surface topography of X-ray mirrors obtained in stitching metrology. For ITF calibration, we have developed an original technique, based on test standards structured as two-dimensional (2D) highly-randomized (HR) binary pseudo-random arrays (BPRAs). The technique employs the unique properties of the HR BPRA patterns in the spatial frequency domain., i.e. the inherent 2D power spectral density of the HR BPRA pattern has a deterministic white-noise-like character that allows direct determination of the ITF with uniform sensitivity over the entire spatial frequency range and field-of-view of an instrument. Here, we explore technological, metrological, and analytical aspects essential for calibration of the retrace and aberration errors of Fizeau interferometers using different types of tilted test samples, including a super-polished reference mirror for the re-trace calibration and the uniformly redundant array (URA) BPRA standards for the geometrical distortion (aberration) calibration. While the first method was previously demonstrated by researchers at DIAMOND Light Source, a method based on the URA BPRA is described and demonstrated here for the first time. We outline the design and fabrication process used in fabrication of URA BPRA test standards, and present the results of application of the URA BPRA standards demonstrating the high efficacy of our approach to geometrical distortion calibration of Fizeau interferometers. We also discuss the possible sources of unexpected peculiarities of the systematic errors, including an astigmatic character of the retrace error, observed with Fizeau interferometers at the Advanced Light Source X-Ray Optics Laboratory.

Munechika, Keiko↗
DOE OSTI2021

Plutonium Co-precipitation with Calcite

The mobility of plutonium (Pu) in the environment is affected by Pu–mineral interactions, such as adsorption–desorption and structural incorporation. Calcite (CaCO 3 ) is a common secondary phase in near surface environments and a major component of many rocks and soils and is expected to form as an alteration product of cement-based materials planned for use in geological repositories. The reactivity of the calcite surface and its ability to tolerate significant variations in its chemical composition through substitution of Ca for other cations make calcite a potentially important sink for environmental contaminants. Here, single crystals of calcite were synthesized from aqueous solutions in equilibrium with air containing Pu as either Pu(VI) or Pu(IV) and characterized using a combination of laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) and X-ray absorption spectroscopy (XAS). These data are used to assess the amount, structure, and oxidation state of Pu co-precipitated into calcite, providing insight into the potential for Pu sequestration in calcite precipitates. Overall, the XAS and LA–ICP–MS data support the co-precipitation of plutonyl [Pu(VI/V)] in the bulk calcite, although the exact nature of the co-precipitated Pu complex is difficult to elucidate in the synthesized material. Co-precipitated plutonyl could be incorporated in either distorted Ca lattice sites or defect sites, and we provide evidence to suggest that Pu(VI) is reduced mainly to Pu(V) in the precipitated solid. LA–ICP–MS additionally shows that the co-precipitation of Pu(VI/V) is favored over the co-precipitation of Pu(IV). Altogether, our results suggest that Pu sequestration in calcite under environmental conditions could immobilize Pu and isolate it from groundwater interactions in contaminated environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗