Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUMMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Reconstructing atmospheric H 2 over the past century from bi-polar firn air records

Abstract. Historical atmospheric H2 levels were reconstructed using firn air measurements from two sites in Greenland (NEEM and Summit) and two sites in Antarctica (South Pole and Megadunes). A joint reconstruction based on the two Antarctic sites yields H2 levels monotonically increasing from about 330 ppb in 1900 to 550 ppb in the late 1990s, leveling off thereafter. These results are similar to individual reconstructions published previously (Patterson et al., 2020, 2021). Interpretation of the Greenland firn air measurements is complicated by challenges in modeling enrichment induced by pore close-off at these sites. We used observations of neon enrichment at NEEM and Summit to tune the parameterization of enrichment induced by pore close-off in our firn air model. The joint reconstruction from the Greenland data shows H2 levels rising 30 % between 1950 and the late 1980s, reaching a maximum of 530 ppb. After 1990, reconstructed atmospheric H2 levels over Greenland are roughly constant, with a small decline of 3 % over the next 25 years. The reconstruction shows good agreement with the available flask measurements of H2 at high northern latitudes.

Geology↗

Porting the WAVEWATCH III (v6.07) wave action source terms to GPU

Abstract. Surface gravity waves play a critical role in several processes, including mixing, coastal inundation, and surface fluxes. Despite the growing literature on the importance of ocean surface waves, wind–wave processes have traditionally been excluded from Earth system models (ESMs) due to the high computational costs of running spectral wave models. The development of the Next Generation Ocean Model for the DOE’s (Department of Energy) E3SM (Energy Exascale Earth System Model) Project partly focuses on the inclusion of a wave model, WAVEWATCH III (WW3), into E3SM. WW3, which was originally developed for operational wave forecasting, needs to be computationally less expensive before it can be integrated into ESMs. To accomplish this, we take advantage of heterogeneous architectures at DOE leadership computing facilities and the increasing computing power of general-purpose graphics processing units (GPUs). This paper identifies the wave action source terms, W3SRCEMD, as the most computationally intensive module in WW3 and then accelerates them via GPU. Our experiments on two computing platforms, Kodiak (P100 GPU and Intel(R) Xeon(R) central processing unit, CPU, E5-2695 v4) and Summit (V100 GPU and IBM POWER9 CPU) show respective average speedups of 2× and 4× when mapping one Message Passing Interface (MPI) per GPU. An average speedup of 1.4× was achieved using all 42 CPU cores and 6 GPUs on a Summit node (with 7 MPI ranks per GPU). However, the GPU speedup over the 42 CPU cores remains relatively unchanged (∼ 1.3×) even when using 4 MPI ranks per GPU (24 ranks in total) and 3 MPI ranks per GPU (18 ranks in total). This corresponds to a 35 %–40 % decrease in both simulation time and usage of resources. Due to too many local scalars and arrays in the W3SRCEMD subroutine and the huge WW3 memory requirement, GPU performance is currently limited by the data transfer bandwidth between the CPU and the GPU. Ideally, OpenACC routine directives could be used to further improve performance. However, W3SRCEMD would require significant code refactoring to make this possible. We also discuss how the trade-off between the occupancy, register, and latency affects the GPU performance of WW3.

58 GEOSCIENCES↗

An analysis of eight flights by U-2 aircraft over severe storms in Oklahoma

The method and results of the analysis of photographic records of the summit areas of severe storms obtained from a U-2 aircraft flying at an altitude of 65,000 ft. over Oklahoma are described. Comparison of the heights of storm cells protruding through the main anvil cirrus deck of a squall line with the predictions of simple "parcel" theory suggests the latter may be used to indicate the maximum development attainable (but not necessarily attained) by a squall line on a given day. It is suggested that temperatures approaching -1OO°C. may occur in the domes of giant quasi-steady storm cells reaching altitudes of 55,000 - 60,000 ft. bounded by a thin shell of extremely stable air, which is not inconsistent with the rather smooth texture of dome summits sometimes shown by the U-2 photographs.

CLOUD PHOTOGRAPHY↗

Differentiation and volcanism in the lunar highlands - Photogeologic evidence and Apollo 16 implications.

Study of materials of possible volcanic origin in the lunar highlands, including highland plains materials, materials forming closely spaced hills in which summit furrows and chains of craters are common, and materials forming closely spaced hills (some of which parallel the lunar grid) on which summit furrows and chain craters are rare. The highland plains materials probably are basaltic lavas with less Fe and Ti than the mare plains materials. The two hilly units appear to consist of materials that, if volcanic, were more viscous in the molten state than any of the lunar plains units; thus these materials may be significantly enriched in felsic components. Most of the highland materials of possible volcanic origin formed after the Imbrium multiring basin but before mare material completed flooding parts of the moon; they therefore postdate accretion of the moon and may represent several episodes of pre-mare volcanism.

Trask, n. J.↗

Glaciological and volcanological studies on the Wrangell Mountains, Alaska

The author has identified the following significant results. It appears feasible to monitor changes of the summit area on Mt. Wrangell. Data from cycles 1, 2, 3, and 4 over the Wrangell Mountains indicate that the deposition of new snow from storms and its later melting by volcanic heat can be detected. Snow can be removed from the areas on the summit only through melting by volcanic heat. The results of this process can be observed in the ERTS-1 images. Note that these results are based upon first-look analysis only. It is expected in the future to be able to increase the information extracted from the images by the use of enhancement techniques.

Benson, C. S.↗

Identification, definition and mapping of terrestrial ecosystems in interior Alaska

The author has identified the following significant results. A transect of the Tanana River Flats to Murphy Dome, Alaska was accomplished. The transect includes an experimental forest and information on the range of vegetation-land form types. Multispectral black and white prints of the Eagle Summit Research Area, Alaska, were studied in conjunction with aerial photography and field notes to determine the characteristics of the vegetation. Black and white MSS prints were compared with aerial photographs of the village of Wiseman, Alaska. No positive identifications could be made without reference to aerial photographs or ground truth data. Color coded density slice scenes of the Eagle Summit Research Area were produced from black and white NASA aerial photographs. Infestations of the spruce beetle in the Cook Inlet, Alaska, were studied using aerial photographs.

Anderson, J. H.↗

Snow cover surveys in Alaska from ERTS-1 data

September and October ERTS scenes have been analyzed to delineate snow cover patterns in northern Alaska's Brooks Range and on Mt. Wrangell, and active volcano in South Central Alaska. ERTS images demonstrate that the snow on the northern foothills of the Brooks Range are significantly more affected by katabatic wind action than are the southern foothills. Aufeis deposits along arctic rivers also can be identified in late summer. A survey of such aufeis deposits could identify additional summertime sources of fresh water supplies. Images of Mt. Wrangell permit monitoring of the interaction between volcanic heat and the mass balance of glaciers that exist on active volcanoes. Temporal changes in the areas of bare rock on the rim of the caldera on the summit reveal significant melting of new snow from an extensive storm on August 18. Digital analysis of data from subsequent passes over the summit on September 7, 23 and 24 revealed considerable bare rock exposed by melting, which is virtually impossible from solar heating at this altitude and date.

Benson, C. S.↗

Thermal surveillance of active volcanoes

The author has identified the following significant results. There are three significant scientific results of the discovery of 48 pinpoint anomalies on the upper flanks of Mt. Rainier: (1) Many of these points may actually be the location of fumarolic vapor emission or warm ground considerably below the summit crater. (2) Discovery of these small anomalies required specific V/H scanner settings for precise elevation on Mt. Rainier's flank, to avoid smearing the anomalies to the point of nonrecognition. Several past missions flown to map the thermal anomalies of the summit area did not/detect the flank anomalies. (3) This illustrates the value of the aerial IR scanner as a geophysical tool suited to specific problem-oriented missions, in contrast to its more general value in a regional or reconnaissance anomaly-mapping role.

Friedman, J. D.↗

Thermal surveillance of active volcanoes

The author has identified the following significant results. By the end of 1973, aerial infrared scanner traverses for thermal anomaly recordings of all Cascade Range volcanoes were essentially completed. Amplitude level slices of the Mount Baker anomalies were completed and compiled at a scale of 1:24,000, thus producing, for the first time, an accurate map of the distribution and intensity of thermal activity on Mount Baker. The major thermal activity is concentrated within the crater south of the main summit and although it is characterized by intensive solfataric activity and warm ground, it is largely subglacial, causing the development of sizable glacier perforation features. The outgoing radiative flux from the east breach anomalies is sufficient to account for the volume of ice melted to form the glacier perforations. DCP station 6251 has been monitoring a thermally anomalous area on the north slope of Mount Baker. The present thermal activity of Mount Baker accounts for continuing hydrothermal alteration in the crater south of the main summit and recurrent debris avalanches from Sherman Peak on its south rim. The infrared anomalies mapped as part of the experiment SR 251 are considered the basic evidence of the subglacial heating which was the probable triggering mechanism of an avalanche down Boulder Glacier on August 20-21, 1973.

Friedman, J. D.↗

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. Snowlines on a small drainage basin were accurately identified on bulk ERTS-1 images without use of digital processing, and results checked with high altitude and ground-based photography. The area and approximate shape of snow patches as small as 20,000 sq m could be correctly identified with a magnifying scanning densitometer. The resolution of ERTS is more than ample for most snow mapping needs. Mount Baker, Washington, has a large crater south of the summit and an area north of the summit which emit considerable geothermal heat in the form of fumaroles and hot ground. Temperatures are being monitored using an ERTS DCS. Debris flows are occassionally released from the crater due to water saturation at the base of a heavy snowpack lying on hydrothermally altered hot ground. These debris flows present a possible hazard to life and property, as they are discharged down the Boulder Glacier toward Baker Lake, the upper of two major hydroelectric power reservoirs which are situated above the populated Skagit River Valley. ERTS-1 images show that the most recent debris flow (20-21 August 1973) can be clearly discerned and mapped. ERTS images provide another important tool for monitoring this potential hazard.

Meier, M. F.↗

Pseudocraters on Mars

In the Cydonia region of southern Acidalium Planitia are small, low-relief, apparently volcanic domelike structures, whose size, morphology, and general occurrence suggest they are martian analogs of terrestrial pseudocraters, a type of phreatic eruption. Average base diameters are about 800 m, which is somewhat larger than typical Icelandic examples. All the domes have summit pits; elongate domes generally have elongate summit pits or, in extreme cases, double pits. The greatest concentration of these domes is in a region of subdued fractured plains which may be old volcanic flows. Pseudocraters on the earth are produced when lava flows over water-logged ground. On Mars surface or subsurface ice was the likley medium that produced the steam eruptions resulting in cratered domelike structures on the lava surfaces.

Frey, H.↗

Lunar mare domes - Classification and modes of origin

In this paper, lunar mare domes (LMDs) are classified according to morphologic and morphometric (primarily diameter) characteristics, and consideration is given to their origin and role in lunar surface processes. In general, they occur either as low, flat, circular structures with convex shapes, slopes less than about 5 deg, and display summit craters, or as irregular structures often adjacent to highland regions and rarely containing summit craters. It is found that LMDs originate through extrusion of lavas through vents to produce low lava shields, or through flooding and draping of preexisting topography to produce kipukas and irregular domes. Smooth, vent-related mare domes range from about 3-17 km in diameter and up to several hundred meters in elevation; they are similar in morphology to small terrestrial lava shields.

Head, J. W.↗

Explosive volcanism on Hecates Tholus, Mars - Investigation of eruption conditions

From a reexamination of the medium and high-resolution Viking images of Amazonian and Hesperian age volcanic centers on Mars, it is believed that an excellent example of well-preserved explosive activity does indeed exist close to the summit of Hecates Tholus. A mantled region to the west of the summit caldera is seen as an example of a geologically very recent plinian air fall ash deposit. Morphological evidence is presented for describing this as explosively generated material, and numerical models of magma ascent and eruption in the Martian environment are used to estimate the physical characteristics (eruption cloud height, magma discharge rate, magma volatile content, duration of activity, and vent size) for this event. Attention is also given to the implication of this eruptive style for the composition of the erupted magma.

Mouginis-Mark, P. J.↗

Thermal infrared analysis of volcanic surfaces: Mars and Hawaii

High spatial resolution data from the Viking infrared thermal mapper (IRTM) are used to examine the Tharsis volcanoes which are situated within a vast area of low thermal inertia material very fine particle size or very high porosity, with the volcanoes having the lowest thermal inertias. Thermal infrared images of the 1823 flow on Kilauea's southwest rift zone show lower thermal inertias near the vent area where shelly pahoehoe is common while individual channelized aa flows with abundant broken pahoehoe slabs are higher thermal inertia. The increase in aa flows to the southeast leads to a general trend of increasing thermal inertias from near vent to distal areas. Martian shield volcanoes have thermal inertias equal to or higher than their surrounding plans when atmospheric effects are removed from the data. The general increase in thermal inertias away from the summit calderas is consistent with the trend of the Hawaiian 1823 flow and may be related to changing lava properties away from the summit.

Zimbelman, J. R.↗

Geologic Interpretation of Remote Sensing Data for the Martian Volcano, Ascraeus Mons

Results of an investigation to relate remotely determined physical properties on Ascraeus Mons to the geologic history of the volcano are summarized. Products include a 1:2,000,000-scale photogeologic map of Ascraeus Mons and its environs; a 1:250,000-scale corrected thermal-inertia map of the summit caldera complex; four corrected thermal-inertia profiles across the volcano from high-resolution thermal data; fourteen low-resolution thermal sequences providing corrected thermal inertias for the volcano throughout half a Martian year; and a calibrated three-color photograph of the volcano. These data were combined with published spectral-reflectance, radar, and atmospheric water-vapor data relating to Acraeus Mons. Photogeologic mapping indicates that the sequence of events at Acraeus Mons is more complex than previously described. The plains surrounding the volcano include numerous flows, some of which can be traced to the flank of the volcano and some to different locations along the Tharsis Ridge. Surface morphology in the summit area is very distinct for features 100 m in scale, but the surface relief and tonal contrast steadily decrease toward the base of the shield, indicating modification by deposition or erosion.

Zimbelman, J.↗

Western Eisila Regio, Venus - Radar properties of volcanic deposits

The 1988 Arecibo Observatory dual-polarization radar images are presented for Western Eisila Regio, Venus. The polarization information and Pioneer-Venus Orbiter reflectivity and altimetry data are analyzed for volcanic deposits on two 400-500 km radius constructs, Sif and Gula Montes. Many of the large effusive deposits studied appear to require superposed flows or multiple vents to explain the observed progression of roughness along their length. High Fresnel reflectivity material may be present along the summit region of Gula Mons and in an embayed tessera-like region to the N. Radar-dark units on the flanks of Sif Mons are inferred to be pyroclastic deposits, but radar-dark features near the summits of both edifices are more consistent with very smooth lava flows. Higher spatial resolution Magellan data will be useful in testing these predictions.

Campbell, Bruce A.↗

Characteristics of Seamounts Near Hawaii as Viewed by GLORIA

Using images and data acquired from the GLORIA sonar system, 390 seamounts within the U.S. Hawaiian Exclusive Economic Zone (HEEZ) off Hawaii have been studied. Their diameters range from 1 to 57 km. with most less than 15 km. Seamount abundance increases exponentially with decreasing size. The areal density of observed seamounts having diameters greater than 1 km is 182/10(exp 6) sq km. The theoretical abundance of seamounts of all sizes normalized to a unit area is (309 +/- 17)/10(exp 6) sq km, about an order of magnitude less than other surveyed areas of the Pacific. This may reflect a lower abundance of Cretaceous seamounts in this region, the covering of small seamounts by sediment, or discrepancies from the use of different data sets to derive the abundance statistics. The seamounts have morphologies ranging from steep-sided, flat-topped structures to cones to more amorphous structures; they are similar to volcanoes found elsewhere on the seafloor. A suite of secondary features associated with the seamounts includes summit craters, summit mounds, coalesced boundaries, landslides, and graben. Several seamount chains are aligned parallel to Cretaceous fracture zones, consistent with an origin close to the ancestral East Pacific Rise. Others are aligned parallel to the Necker Ridge, suggesting that they formed contemporaneously with Necker in the plate interior. This observation, together with high abundances of seamounts where other intraplate igneous processes have occurred, suggests some seamounts formed since leaving the spreading center.

Bridges, Nathan T.↗

The Ultimate Mountaintop: Astronomy Aboard Stratospheric Balloons

As funding, for astronomy dwindles and the competition for observation time heats up, more astronomers may turn to balloons. Far above the Keck telescope on Hawaii's Mauna Kea, higher still than the hostile snowcapped peaks of Mt. Everest, there exists a 40-kilometer summit that will place their telescopes above 99% of the atmosphere. With the prospect of 100-day and even 1,000-day balloons, the climb to the summit is more and more tempting. Surely, given enough cash, most astronomers would opt for a lunar base or a platform beyond the Earth. Until then, many seem happy to settle for a stratospheric mountaintop.

Wanjek, Christopher↗