Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLATER METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Theoretical Study of Mechanical Stability and Physical Properties of Co{sub 2}V{sub 1−x}Zr{sub x}Ga

The mechanical stability and physical properties of Co{sub 2}V{sub 1−x}Zr{sub x}Ga (x = 0, 0.25, 0.50, 0.75, 1) have been predicted by using ab initio calculations based on density functional theory. The exchange-correlation potentials are treated within the generalized gradient approximation-Perdew-Burke and Ernzerhhof (GGA-PBE) and Hubbard coefficient (GGA+U). The investigated minimum lattice parameter of Co{sub 2}VGa is 5.8030 Å, which is in excellent agreement with available experimental and theoretical data and for Co{sub 2}V{sub 1−x}Zr{sub x}Ga (x = 0.25, 0.50, 0.75, 1) are 5.9026, 5.9625, 6.0060 and 6.0021 Å, respectively, which are predicted for the very first time. The total magnetic moments decrease with increasing concentration of x in Co{sub 2}V{sub 1−x}Zr{sub x}Ga, in agreement with the Slater-Pauling rule. Band structure and density of states calculations show that the minority spin channel exhibits band gaps of 0.43, 0.46, 0.52, 0.54 and 1.01 eV for GGA+U scheme around the Fermi level confirming that all the studied composites are half-metallic in nature. In this study, we also studied the elastic constant and it is established that all the materials are mechanically stable and ductile in nature. The Co{sub 2}VGa is stiffer than other materials and all the studied composites have anisotropic behaviour. Moreover, by using a quasi-harmonic Debye model and calculated elastic constant, the Debye temperature and temperature-dependent constant volume heat capacity have been investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of Scheduling Methods for Multiple Runways

Several scheduling strategies are analyzed in order to determine the most efficient means of scheduling aircraft when multiple runways are operational and the airport is operating at different utilization rates. The study compares simulation data for two and three runway scenarios to results from queuing theory for an M/D/n queue. The direction taken, however, is not to do a steady-state, or equilibrium, analysis since this is not the case during a rush period at a typical airport. Instead, a transient analysis of the delay per aircraft is performed. It is shown that the scheduling strategy that reduces the delay depends upon the density of the arrival traffic. For light traffic, scheduling aircraft to their preferred runways is sufficient; however, as the arrival rate increases, it becomes more important to separate traffic by weight class. Significant delay reduction is realized when aircraft that belong to the heavy and small weight classes are sent to separate runways with large aircraft put into the 'best' landing slot.

Bolender, Michael A.↗

International Land Model Benchmarking (ILAMB) Workshop Report, Technical Report DOE/SC-0186

As Earth system models become increasingly complex, there is a growing need for comprehensive and multi-faceted evaluation of model projections. To advance understanding of biogeochemical processes and their interactions with hydrology and climate under conditions of increasing atmospheric carbon dioxide, new analysis methods are required that use observations to constrain model predictions, inform model development, and identify needed measurements and field experiments. Better representations of biogeochemistry–climate feedbacks and ecosystem processes in these models are essential for reducing uncertainties associated with projections of climate change during the remainder of the 21st century.

54 ENVIRONMENTAL SCIENCES↗

Influence of Karen Immigrant Students on Teachers’ Instructional Decisions in the Rural United States

Across the United States, the number of classrooms welcoming young students who are new English language learners (ELL) is rapidly growing. Motivated by a dramatic increase in the number of Myanmar- and Burma-originating immigrants now attending English-speaking schools in the rural, upper midwestern United States, this study systematically considers how the presence of Karen immigrant students impacts the instructional decisions that K-12 classroom teachers make using an exploratory case study method. Several recurrent themes emerged, and findings can be used to help better prepare both pre-service and in-service teachers to meet the needs of their ELL students, as well as policy makers. These emergent themes include the following: (a) authentic teacher–family relationships are key; (b) visual/hands-on learning and the use of technology enhance student achievement; (c) student work must be completed during the school day in classrooms; (d) teachers’ purposeful use of parallel language is critical for learning; (e) rigor can be maintained, although quantity is often adjusted; and (f) targeted ESL/cultural training for pre-service and newly hired teachers is positively influential. Such informed training often seems to help teachers learn key cultural distinctions and become better able to identify the most effective ways to meet the needs of students.

99 GENERAL AND MISCELLANEOUS↗

Radiometric Calibration of the Earth Observing System's Imaging Sensors

The work on the grant was mainly directed towards developing new, accurate, redundant methods for the in-flight, absolute radiometric calibration of satellite multispectral imaging systems and refining the accuracy of methods already in use. Initially the work was in preparation for the calibration of MODIS and HIRIS (before the development of that sensor was canceled), with the realization it would be applicable to most imaging multi- or hyper-spectral sensors provided their spatial or spectral resolutions were not too coarse. The work on the grant involved three different ground-based, in-flight calibration methods reflectance-based radiance-based and diffuse-to-global irradiance ratio used with the reflectance-based method. This continuing research had the dual advantage of: (1) developing several independent methods to create the redundancy that is essential for the identification and hopefully the elimination of systematic errors; and (2) refining the measurement techniques and algorithms that can be used not only for improving calibration accuracy but also for the reverse process of retrieving ground reflectances from calibrated remote-sensing data. The grant also provided the support necessary for us to embark on other projects such as the ratioing radiometer approach to on-board calibration (this has been further developed by SBRS as the 'solar diffuser stability monitor' and is incorporated into the most important on-board calibration system for MODIS)- another example of the work, which was a spin-off from the grant funding, was a study of solar diffuser materials. Journal citations, titles and abstracts of publications authored by faculty, staff, and students are also attached.

Slater, Philip N.↗

Properties of a two-orbital model for oxypnictide superconductors: Magnetic order, B2g spin-singlet pairing channel, and its nodal structure

A recently proposed two-orbital model for the Fe-based superconductors is studied using the Lanczos method on small clusters as well as pairing mean-field approximations. Our main goals are i to provide a comprehensive analysis of this model using numerical techniques with focus on the magnetic state at halffilling and the quantum numbers of the state with two more electrons than half-filling and ii to investigate the nodal structure of the mean-field superconducting state and compare the results with angle-resolved photoemission data. In particular, we provide evidence that the dominant magnetic state at half-filling contains spin stripes, as observed experimentally using neutron scattering techniques. Competing spin states are also investigated. The symmetry properties of the state with two more electrons added to half-filling are also studied: depending on parameters, either a spin-singlet or spin triplet state is obtained. Since experiments suggest spin-singlet pairs, our focus is on this state. Under rotations, the spin-singlet state transforms as the B2g representation of the D4h group. We also show that the s pairing operator transforms according to the A1g representation of D4h and becomes dominant only in an unphysical regime of the model where the undoped state is an insulator. We obtain qualitatively very similar results both with hopping amplitudes derived from a Slater-Koster approximation and with hoppings selected to fit band-structure calculations, the main difference between the two being the size of the Fermi surface pockets. For robust values of the effective electronic attraction producing the Cooper pairs, assumption compatible with recent angle-resolved photoemission spectroscopy ARPES results that suggest a small Cooper-pair size, the nodes of the two-orbital model are found to be located only at the electron pockets. Note that recent ARPES efforts have searched for nodes at the hole pockets or only in a few directions at the electron pockets. Thus, our results for the nodal distribution will help us to guide future ARPES experiments in their search for the existence of nodes in the Fe-based superconductors. More in general, the investigations reported here aim to establish several of the properties of the two-orbital model. Only a detailed comparison with experiments will clarify whether this simple model is or not a good approximation to describe the Fe pnictides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterizing Physical Properties of Streambed Interface Sediments Using In Situ Complex Electrical Conductivity Measurements

Streambed sediment physical properties such as surface area, are difficult to quantify in situ but exert a high-level control on a wide range of biogeochemical processes and sorption of contaminants. We introduce the use of complex electrical conductivity (CC) methods (also known as spectral-induced polarization (SIP)) that measure both real and imaginary conductivity to noninvasively and efficiently characterize shallow streambed sediments. We explore the method through synthetic modeling, laboratory, and field measurements to demonstrate the sensitivity of imaginary conductivity to sediment surface area, controlled in part by fine-grained iron oxides produced by anoxic groundwater discharge. Laboratory measurements verify expected relationships between CC parameters and sediment properties. Synthetic modeling using a 1D analytical model illustrates the influence of water layer depth and conductivity on the field CC measurements made at the streambed-stream water interface. Specifically, the inverted sediment imaginary conductivity is less impacted by uncertainty in the water layer depth and conductivity relative to the real conductivity and phase shift. Field CC measurements along a landfill-impacted river reveal discrete streambed zones with enhanced bulk surface area generally corresponding to anoxic groundwater discharge zones with high concentrations of fine-grained iron oxide precipitates.

54 ENVIRONMENTAL SCIENCES↗

Use of Micro-Gravity Sensors for External Fluid Level Monitoring in Waste and Nuclear Related Applications - 20315

There are a number of applications in nuclear energy and hazardous waste disposal that require monitoring of fluids under extreme environments, including high levels of temperature, pressure, toxicity and radioactivity. Many of these applications will benefit from a monitoring technique that is external and non-invasive. Currently the sensors used are invasive, must reside inside the pressurized vessels and must penetrate the vessel walls, which can create a weakness in the vessel. Additionally, instruments that are used inside such containers must be exceptionally hardened to the environment. Information Systems Laboratories (ISL) has developed an external mass (gravimetric) measuring technique for monitoring nuclear coolant in Small Modular Reactors (SMRs), which will also work for measuring fluid levels in waste tanks, that avoids the problems inherent in invasive sensors. It utilizes a COTS gravitational sensor of unprecedented accuracy, leveraged via proper sensor placement geometry, to detect fluid changes of small amplitude from an outside position, obviating the need to penetrate the vessel. The technique is called Gravisense{sup TM}. ISL has proven via simulation and experiment that this concept can be usefully applied to monitoring fluid levels in both nuclear reactors and large waste tanks. Numerical simulation algorithms were developed to calculate the gravity effect of small changes in water level, which were verified by experiments at the NIST Physical Simulator facility at the Oregon State University. The measured ultralow noise levels of the superconducting gravimeter type which utilizes a Niobium sphere suspended in a magnetic field to attain its phenomenal accuracy, demonstrated that fluid levels in SMRs can be measured at least to within 3 cm. Furthermore, the method can distinguish between a contained leak (from reactor to containment vessel) from an external leak (from reactor to outside of containment). Additionally, simulations of waste canisters that hold spent fuel rods show that the fluid level measuring accuracy can potentially do better than 1 cm accuracy by measuring from below the vessel, and judicious placement of sensors on top of large waste tanks can potentially achieve a very impressive 2 mm measurement accuracy. These encouraging results prove that the Gravisense{sup TM} technique for fluid determination can be very useful in nuclear energy generation, testing, and research, as well as in waste monitoring situations that are difficult to monitor via traditional sensing technology. We believe that the next step should be to test the technique on canisters of the type that are currently storing waste in various DOE locations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Slater-Pauling behavior within quaternary intermetallic borides of the Ti{sub 3}Co{sub 5}B{sub 2} structure-type

First-principles, density-functional studies of several intermetallic borides of the general type M{sub 2}M'Ru{sub 5-n}Rh{sub n}B{sub 2} (n=0-5; M=Sc, Ti, Nb; M'=Fe, Co) show that the variation in saturation magnetic moment with valence-electron count follows a Slater-Pauling curve, with a maximum moment occurring typically at 66 valence electrons. The magnetic moments in these compounds occur primarily from the 3d electrons of the magnetically active M' sites, with some contribution from the Ru/Rh sites via magnetic polarization. Electronic DOS curves reveal that a rigid-band approach is a reasonable approximation for the estimation of saturation moments and the analysis of orbital interactions in this family of complex borides. COHP analyses of the M'-M' orbital interactions indicate optimized interactions in the minority spin states for Co-containing phases, but strong bonding interactions remaining in Fe-containing phases. - Graphical abstract: Theoretically determined (spin-polarized LMTO-GGA) local magnetic moments as a function of the chemical valence Z for various intermetallic borides.

36 MATERIALS SCIENCE↗

2016 International Land Model Benchmarking (ILAMB) Workshop Report

As earth system models (ESMs) become increasingly complex, there is a growing need for comprehensive and multi-faceted evaluation of model projections. To advance understanding of terrestrial biogeochemical processes and their interactions with hydrology and climate under conditions of increasing atmospheric carbon dioxide, new analysis methods are required that use observations to constrain model predictions, inform model development, and identify needed measurements and field experiments. Better representations of biogeochemistryclimate feedbacks and ecosystem processes in these models are essential for reducing the acknowledged substantial uncertainties in 21st century climate change projections.

earth system models (ESMs)↗

Modeling intrinsic defects in LiNbO{sub 3} within the Slater-Janak transition state model

Intrinsic point defects in LiNbO{sub 3}, i.e., isolated Nb antisites and Li as well Nb vacancies, are investigated from first-principles within the Slater-Janak transition state model. Thereby the electronic structure of the investigated defects is calculated with hybrid exchange-correlation functionals. This approach allows for the calculation of charge transition levels without comparing the total energies of differently charged supercells. The obtained results are in agreement with previous hybrid density-functional theory calculations based on total-energy differences. Li and Nb vacancies can be formed in the V{sub Li}{sup −} and V{sub Nb}{sup 5−} charge states only, as long as the host is not strongly p-type or n-type, respectively. Nb{sub Li} antisites may capture one or two electrons, forming the defect states often referred to as small bound polaron and bi-polaron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal short-range trajectories for helicopters

An optimal flight path algorithm using a simplified altitude state model and a priori climb cruise descent flight profile was developed and applied to determine minimum fuel and minimum cost trajectories for a helicopter flying a fixed range trajectory. In addition, a method was developed for obtaining a performance model in simplified form which is based on standard flight manual data and which is applicable to the computation of optimal trajectories. The entire performance optimization algorithm is simple enough that on line trajectory optimization is feasible with a relatively small computer. The helicopter model used is the Silorsky S-61N. The results show that for this vehicle the optimal flight path and optimal cruise altitude can represent a 10% fuel saving on a minimum fuel trajectory. The optimal trajectories show considerable variability because of helicopter weight, ambient winds, and the relative cost trade off between time and fuel. In general, reasonable variations from the optimal velocities and cruise altitudes do not significantly degrade the optimal cost. For fuel optimal trajectories, the optimum cruise altitude varies from the maximum (12,000 ft) to the minimum (0 ft) depending on helicopter weight.

Slater, G. L.↗

Inward-Turning Streamline-Traced Inlet Design Method for Low-Boom, Low-Drag Applications

A new design method for inward-turning, streamline-traced inlets is presented. Resulting designs are intended for moderate supersonic, low-drag, low-boom applications such as that required for NASA's proposed low-boom flight demonstration aircraft. A critical feature of these designs is the internal cowl lip angle that allows for little or no flow turning on the outer nacelle. Present methods using conical-flow Busemann parent flowfields have simply truncated, or otherwise modified the stream-traced contours to include this internal cowl angle. Such modifications disrupt the parent flowfield, reducing inlet performance and flow uniformity. The method presented herein merges a conical flowfield that includes a leading shock with a truncated Busemann flowfield in a manner that minimizes unwanted interactions. A leading internal cowl angle is now inherent in the parent flowfield, and inlet contours traced from this flowfield retain its high performance and good flow uniformity. CFD analysis of a candidate inlet design is presented that verifies the design technique, and reveals a starting issue with the basic geometry. A minor modification to the cowl lip region is shown to eliminate this phenomenon, thereby allowing starting and smooth transition to sub-critical operation as back-pressure is increased. An inlet critical-point total pressure recovery of 96 is achieved based on CFD results for a Mach 1.7 freestream design. Correction for boundary-layer displacement thickness, and sizing for a given engine airflow requirement are also discussed.

low sonic boom↗

2016 International Land Model Benchmarking (ILAMB) Workshop Report

As Earth system models become increasingly complex, there is a growing need for comprehensive and multi-faceted evaluation of model projections. To advance understanding of biogeochemical processes and their interactions with hydrology and climate under conditions of increasing atmospheric carbon dioxide, new analysis methods are required that use observations to constrain model predictions, inform model development, and identify needed measurements and field experiments. Better representations of biogeochemistry–climate feedbacks and ecosystem processes in these models are essential for reducing uncertainties associated with projections of climate change during the remainder of the 21st century.

54 ENVIRONMENTAL SCIENCES↗

Vortex Generators in a Streamline-Traced, External-Compression Supersonic Inlet

Vortex generators within a streamline-traced, external-compression supersonic inlet for Mach 1.66 were investigated to determine their ability to increase total pressure recovery and reduce total pressure distortion. The vortex generators studied were rectangular vanes arranged in counter-rotating and co-rotating arrays. The vane geometric factors of interest included height, length, spacing, angle-of-incidence, and positions upstream and downstream of the inlet terminal shock. The flow through the inlet was simulated numerically through the solution of the steady-state, Reynolds-averaged Navier-Stokes equations on multi-block, structured grids using the Wind-US flow solver. The vanes were simulated using a vortex generator model. The inlet performance was characterized by the inlet total pressure recovery and the radial and circumferential total pressure distortion indices at the engine face. Design of experiments and statistical analysis methods were applied to quantify the effect of the geometric factors of the vanes and search for optimal vane arrays. Co-rotating vane arrays with negative angles-of-incidence positioned on the supersonic diffuser were effective in sweeping low-momentum flow from the top toward the sides of the subsonic diffuser. This distributed the low-momentum flow more evenly about the circumference of the subsonic diffuser and reduced distortion. Co-rotating vane arrays with negative angles-of-incidence or counter-rotating vane arrays positioned downstream of the terminal shock were effective in mixing higher-momentum flow with lower-momentum flow to increase recovery and decrease distortion. A strategy of combining a co-rotating vane array on the supersonic diffuser with a counter-rotating vane array on the subsonic diffuser was effective in increasing recovery and reducing distortion.

computational fluid dynamics↗

Adopting Biophysics Methods in Pursuit of Biogeophysical Research: Advancing the Measurement and Modeling of Electrical Signatures of Microbe-Mineral Transformations Impacting Contaminant Transport (Final Report)

This exploratory project involved laboratory experiments to investigate three hypotheses: (H1) Physics-based modeling of low-frequency dispersions (henceforth referred to as alpha) measured in broadband dielectric spectroscopy (DS) data can quantify pore-scale geometric changes impacting contaminant transport resulting from biomineralization; (H2) Physics-based modeling of high-frequency dispersions (henceforth referred to as beta) measured in broadband dielectric spectroscopy data can quantify rates of mineral growth in/on the cell wall; (H3) Application of this measurement and modeling approach can enhance geophysical interpretation of bioremediation experiments conducted at the RIFLE IFC by providing constraints on bioremediation efficiency (biomass concentration, mineral uptake within the cell wall, biomineralization rate). We tested H1 by performing DS measurements (alpha and beta range) on iron (Fe) particles of dimensions similar to microbial cells, dispersed within agar gels over a range of Fe concentrations. We have tested the ability of the physics-based modeling to predict volume concentrations of the Fe particles by assuming that the Fe particles are polarizable inclusions within an otherwise nonpolarizable medium. We evaluated the smallest volume concentration that can be detected with the DS method. Similar experiments and modeling have been performed on the sulfate-reducing bacteria D. vulgaris. Synchrotron x-ray absorption measurements were conducted to determine the local structure of biominerals coatings on D. vulgaris which were grown in the presence of different Fe concentrations. We imaged the mineral growth on cell wall using SEM. We used dielectric spectroscopy to differentiate between iron sulfide precipitates of biotic and abiotic nature. Biotic measurements were made on D. vulgaris bacteria grown in the presence of different concentrations of iron to form different thicknesses of iron sulfide precipitates around themselves and abiotic measurements were made on different concentrations of pyrrhotite particles suspended in agar. Results show a decrease in dielectric permittivity as a function of frequency for biotic minerals and an opposite trend is observed for abiotic minerals. Our results suggest that dielectric spectroscopy offers a noninvasive and fast approach for distinguishing between abiotic and biotic mineral precipitates.

54 ENVIRONMENTAL SCIENCES↗

A parcel-level evaluation of distributed wind opportunity in the contiguous United States

This study examines the potential for distributed wind (DW) energy across the contiguous United States, leveraging advancements in the National Renewable Energy Laboratory's distributed wind model, dWind. The novel modeling approach described here utilizes a high-resolution dataset and analyzes over 150 million parcels, a significant improvement from prior methods that extrapolated results from a smaller random sample. This achievement is enabled through key model performance improvements, such as transitioning to multiprocessing, which reduces runtime by 97 %. This optimized, high-resolution approach allows the inspection of technology deployment potential and impact on a variety of scales tailored to individual properties and regions. The results here align with prior work showing substantial opportunity for energy generation using DW technologies. Key findings reveal a substantial increase from prior results in estimated technical and economic potential for DW. Metrics tuned to highlight economic potential also show increased incentives supporting rural adoption. Results are spatially aggregated for usability and published via the U.S. Department of Energy Wind Data Portal and a custom scenario visualization platform, aiding policymakers, industry, and property owners in assessing DW viability across various scenarios and spatial scales.

17 WIND ENERGY↗