Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Seeding Method for Velocimetry and Visualization of Supersonic Retropropulsion Nozzle Plumes

In the current work, the “Venturi seeder” method for nozzle plumes is improved and studied to determine suitability for particle image velocimetry. This seeding method involves independently pressurizing the primary flow path and a separate seed liquid reservoir, connecting them at the throat of a Venturi contraction upstream of the nozzle. The pressure differential at the throat causes the liquid to enter the nozzle channel where it is atomized into particles by strong shearing forces. This new seeding system was characterized by conducting a series of diagnostics using different exit nozzle pressure ratios and seed reservoir pressures. Shadowgraph imaging confirmed the nozzle plumes to be underexpanded jets. A particle sizing device determined that generated DEHS oil particles had median aerodynamic diameters of 0.67, 0.69, and 0.73 μm for seed liquid reservoir pressure supplies of 0.67, 0.60, and 0.93 MPa and primary flow path pressures of 0.67, 0.76, and 0.93 MPa measured downstream of the Venturi throat, respectively. These diameters were within the threshold for acceptable response time in typical gas flows (≤ 1 μm). PIV experiments were conducted on the nozzle plume for all presented cases; mean axial and transverse velocities appeared as expected for the underexpanded jet structure, including the Mach disk and re-acceleration regions. Additional sizing analysis based on the particle response times across the normal shock again showed particle diameters to be well less than 1 μm for all cases. The results suggest that this method is an inexpensive and relatively simple solution to the problem of seeding nozzle plumes. The method will be used in testing of supersonic retropropulsion models in the Unitary Plan Wind Tunnel at The NASA Langley Research Center in 2022.

particle image velocimetry↗

Molecular Clustering Interrelationships and Carbohydrate Conformation in Hull and Seeds Among Barley Cultivars

The objective of this study was to use molecular spectral analyses with the diffuse reflectance Fourier transform infrared spectroscopy (DRIFT) bioanlytical technique to study carbohydrate conformation features, molecular clustering and interrelationships in hull and seed among six barley cultivars (AC Metcalfe, CDC Dolly, McLeod, CDC Helgason, CDC Trey, CDC Cowboy), which had different degradation kinetics in rumen. The molecular structure spectral analyses in both hull and seed involved the fingerprint regions of ca. 1536-1484 cm{sup -1} (attributed mainly to aromatic lignin semicircle ring stretch), ca. 1293-1212 cm{sup -1} (attributed mainly to cellulosic compounds in the hull), ca. 1269-1217 cm{sup -1} (attributed mainly to cellulosic compound in the seeds), and ca. 1180-800 cm{sup -1} (attributed mainly to total CHO C-O stretching vibrations) together with an agglomerative hierarchical cluster (AHCA) and principal component spectral analyses (PCA). The results showed that the DRIFT technique plus AHCA and PCA molecular analyses were able to reveal carbohydrate conformation features and identify carbohydrate molecular structure differences in both hull and seeds among the barley varieties. The carbohydrate molecular spectral analyses at the region of ca. 1185-800 cm{sup -1} together with the AHCA and PCA were able to show that the barley seed inherent structures exhibited distinguishable differences among the barley varieties. CDC Helgason had differences from AC Metcalfe, MeLeod, CDC Cowboy and CDC Dolly in carbohydrate conformation in the seed. Clear molecular cluster classes could be distinguished and identified in AHCA analysis and the separate ellipses could be grouped in PCA analysis. But CDC Helgason had no distinguished differences from CDC Trey in carbohydrate conformation. These carbohydrate conformation/structure difference could partially explain why the varieties were different in digestive behaviors in animals. The molecular spectroscopy technique used in this study could also be used for other plant-based feed and food structure studies.

09 BIOMASS FUELS↗

Bad seeds sprout perilous dynamics: stochastic thermostat induced trajectory synchronization in biomolecules

Molecular dynamics simulations starting from different initial conditions are commonly used to mimic the behavior of an experimental ensemble. We show in this article that when a Langevin thermostat is used to maintain constant temperature during such simulations, extreme care must be taken when choosing the random number seeds used in order to prevent statistical correlation among the MD trajectories. While recent studies have shown that stochastically thermostatted trajectories evolving within a single potential basin with identical random number seeds tend to synchronize, we show that there is a synchronization effect even for complex, biologically relevant systems. We demonstrate this effect in simulations of Alanine trimer and pentamer and in a simulation of a temperature-jump experiment for peptide folding of a 14-residue peptide. Even in replica-exchange simulations, in which the trajectories are at different temperatures, we find partial synchronization occurring when the same random number seed is employed. We explain this by extending the recent derivation of the synchronization effect for two trajectories in a harmonic well to the case in which the trajectories are at two different temperatures. Our results suggest several ways in which mishandling selection of a pseudo random number generator initial seed can lead to corruption of simulation data. Simulators can fall into this trap in simple situations such as neglecting to specifically indicate different random seeds in either parallel or sequential restart simulations, utilizing a simulation package with a weak pseudorandom number generator, or using an advanced simulation algorithm that hasn't been programmed to distribute initial seeds.

74 ATOMIC AND MOLECULAR PHYSICS↗

In situ X-ray Studies of Native and Mo-Seeded Surface Nanostructuring During Ion Bombardment of Si(100)

Native and Mo-seeded nanostructuring of the Si(100) surface during Ar+ ion bombardment is investigated by means of real-time grazing-incidence small-angle x-ray scattering and atomic force microscopy. During off-axis bombardment at room temperature, the native early-stage growth kinetics of nanoripples on the surface is found to be in reasonable overall agreement with theoretical predictions, particularly when an ion impact induced lateral mass redistribution term is included. For normal-incidence bombardment at room temperature, a native short wavelength smoothing of the amorphized Si surface is observed, suggesting that ion impact induced lateral mass redistribution dominates the Bradley-Harper instability. During 5% Mo-seeded normal-incidence bombardment at temperatures up to 450 C, nanodots form with heights decreasing as the substrate temperature increases. This trend is counter to that typically observed for the growth of large cone structures on metals and suggests that the primary effect of thermal energy here is in promoting surface smoothing, rather than increasing diffusion of seed atoms to form protective clusters. During seeded bombardment at 650 C the surface remains crystalline and surface corrugations exhibit dynamic scaling characteristic of surface diffusion-driven instabilities. This is the same behavior as is found in the absence of seeding and its presence suggests that at this concentration seeding does not play a large role during normal-incidence bombardment of the Si surface at high temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomistic understanding of interdependence of crystal growth of two seeds embedded in glass

Recent results showed that during growth, a crystal seed embedded in glass experiences nonuniform forces from the host matrix. This result raised the possibility that during devitrification of glass, the growth of a crystal can be affected by the presence of neighboring crystals. To investigate the nature of any such interdependence of growth of neighboring crystals, atomic scale morphology of two seeds growing in a glass matrix was simulated as a function of their separation and relative misorientation. The results show a coupled rotation of seeds driven by (1) non-uniform forces from the surrounding glass, and (2) mutual interactions between the seeds. At small separations and low misorientation, each seed rotates toward perfect alignment, ultimately forming a single crystal. The onset and rate of alignment, as well as subsequent crystal growth, are strongly dependent on the growth temperature. In contrast, at larger separations and higher misorientation, the seeds cannot achieve full alignment before coalescing, resulting in polycrystalline structures.

36 MATERIALS SCIENCE↗

Anisotropic Synthesis of Armchair Graphene Nanoribbon Arrays from Sub-5 nm Seeds at Variable Pitches on Germanium

At widths below 10 nm, armchair graphene nanoribbons become semiconductors. One interesting route to synthesize nanoribbons is chemical vapor deposition (CVD) of hydrocarbons on Ge(001), and synthesis from seeds reduces nanoribbon polydispersity. In this contribution, we advance the seed-initiated synthesis of nanoribbons and explore the impact of seed size and nanoribbon spacing on growth kinetics. Periodic arrays of graphene seeds are lithographically patterned and etched to reduce their diameter. The viability of initiating synthesis from sub-5 nm seeds is demonstrated, and the pitch between nanoribbons is reduced from 500 to 50 nm to show that crowding effects do not perturb nanoribbon growth kinetics. The invariance of kinetics with pitch in combination with density functional theory (DFT) calculations suggest that (1) the growth species for synthesis has a diffusion length of ≪50 nm and/or (2) the kinetics are strongly attachment-limited. These results demonstrate that seed-initiated synthesis on Ge(001) is a promising path for creating dense arrays of armchair graphene nanoribbons for semiconductor electronics applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Nonclassical to Classical: Crystallization Seeds Reshape Nucleation Mechanisms

Crystalline seeds are widely employed in crystallization to accelerate nucleation and control product polymorphs; yet, their impact on nucleation mechanisms remains poorly understood. While homogeneous nucleation of crystals from solution often proceeds through nonclassical pathways involving amorphous intermediates, it is unclear how seeds that promote heterogeneous nucleation reshape these mechanisms and govern polymorph selection. Here, in this study, we provide the first direct evidence that crystalline seeds can bypass the need for amorphous intermediates as nucleation sites, converting nonclassical nucleation mechanisms into classical, monomer-by-monomer crystallization pathways. Using molecular dynamics simulations of zeolite synthesis, we uncover a complex reaction network of competing nucleation processes mediated by intermediate interfacial polymorphs. The interplay between thermodynamic stability and kinetic favorability of these interfacial polymorphs dictates nucleation outcomes, creating a dynamic balance between the interfacial polymorph stability and crystallization rates. Furthermore, we show that the synthesis environment-whether monomers or aggregates serve as reactants-profoundly impacts these pathways. At moderate supersaturation, seeds eliminate amorphous intermediates and promote classical nucleation, whereas high supersaturation or aggregate-based reactants favor nonclassical pathways, even in the presence of seeds. These findings establish a general framework for understanding how seeds govern crystallization mechanisms, with broad implications for controlling nucleation kinetics, polymorph selection, and material properties. While focused on zeolites, this work reveals insights that may be applicable to biominerals, pharmaceuticals, functional materials, and catalysts, providing a basis for engineering crystallization pathways in diverse applications.

Chu-Jon, Carlos [Univ. of Utah, Salt Lake City, UT↗

O-GlcNAc forces an α-synuclein amyloid strain with notably diminished seeding and pathology

Amyloid-forming proteins such α-synuclein and tau, which are implicated in Alzheimer’s and Parkinson’s disease, can form different fibril structures or strains with distinct toxic properties, seeding activities and pathology. Understanding the determinants contributing to the formation of different amyloid features could open new avenues for developing disease-specific diagnostics and therapies. Here we report that O-GlcNAc modification of α-synuclein monomers results in the formation of amyloid fibril with distinct core structure, as revealed by cryogenic electron microscopy, and diminished seeding activity in seeding-based neuronal and rodent models of Parkinson’s disease. Although the mechanisms underpinning the seeding neutralization activity of the O-GlcNAc-modified fibrils remain unclear, our in vitro mechanistic studies indicate that heat shock proteins interactions with O-GlcNAc fibril inhibit their seeding activity, suggesting that the O-GlcNAc modification may alter the interactome of the α-synuclein fibrils in ways that lead to reduce seeding activity in vivo. Our results show that posttranslational modifications, such as O-GlcNAc modification, of α-synuclein are key determinants of α-synuclein amyloid strains and pathogenicity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Bi{sub 2}O{sub 3} seed layer on crystalline orientation and ferroelectric properties of Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} thin films prepared by rf-magnetron sputtering method

Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} (BLT) thin films with Bi{sub 2}O{sub 3} seed layers were prepared on Pt(111)/Ti/SiO{sub 2}/Si substrate by rf-magnetron sputtering method. The effect of annealing procedure, thickness, and position of Bi{sub 2}O{sub 3} seed layer on the structural and electrical properties of BLT thin film was investigated. When using a two-step annealing procedure, the x-ray diffraction pattern indicated that BLT thin film with a Bi{sub 2}O{sub 3} seed layer showed c-axis preference orientation. Compared with Pt/BLT/Bi{sub 2}O{sub 3}/Pt structure film, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt structure film showed higher oriented to c direction. The ferroelectric property of BLT thin film improved remarkably with the incorporation of Bi{sub 2}O{sub 3} seed layer. Under the applied voltage of 14 V, the remnant polarization and coercive voltage of the Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3} capacitor with 18-nm-thick Bi{sub 2}O{sub 3} seed layer were 45.2 {mu}C/cm{sup 2} and 9.2 V, respectively. Moreover, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt film with 18-nm-thick Bi{sub 2}O{sub 3} seed layers exhibited good fatigue endurance even after 6x10{sup 9} switching cycles, which was attributed to the double-sided Bi{sub 2}O{sub 3} layer. They decreased the grain boundary density by enhancing the grain size of BLT film and enhanced the c-axis preferential orientation. Compared with BLT film deposited directly on Pt, double-sided Bi{sub 2}O{sub 3} layer would greatly enhance the leakage current resistance of the BLT film.

36 MATERIALS SCIENCE↗

Effect of Ti seed layers on structure of self-organized epitaxial face-centered-cubic-Ag(001) oriented nanodots

The influence of Ti seed layers on the structure of self-organized Ag nanodots, obtained with a Ti seed-layer-assisted thermal agglomeration method, has been investigated. The samples were grown on MgO(001) single crystal substrates by RF magnetron sputter deposition. The samples were deposited at room temperature and post-annealed at 350 °C for 4 h while maintaining the chamber vacuum conditions. The results of atomic force microscopy (AFM) observations indicated that the insertion of the Ti seed layer (0.6–5.0 nm) between the MgO substrate and Ag layer promotes the agglomeration process, forming the nanodot array. Comparisons between the AFM images revealed that the size of the Ag nanodots was increased with an increase in the Ti seed layer thickness. The atomic concentration of the film surface was confirmed by X-ray photoelectron spectroscopy (XPS). The XPS result suggested that the nanodot surface mainly consisted of Ag. Moreover, X-ray diffraction results proved that the initial deposition of the Ti seed layer (0.6–5.0 nm) onto MgO(001) prior to the Ag deposition yielded high-quality fcc-Ag(001) oriented epitaxial nanodots. The optical absorbance spectra of the fabricated Ag nanodots with various Ti seed layer thicknesses were obtained in the visible light range.

36 MATERIALS SCIENCE↗

Fabrication of dye-sensitized solar cell (DSSC) using annato seeds (Bixa orellana Linn)

The Fabrication of dye sensitized solar cell (DSSC) using Annato seeds has been conducted in this study. Annato seeds (Bixa orellana Linn) used as a sensitizer for dye sensitized solar cell. The experimental parameter was concentration of natural dye. Annato seeds was extracted using etanol solution and the concentration was controlled by varying mass of Annato seeds. A semiconductor TiO{sub 2} was prepared by a screen printing method for coating glass use paste of TiO{sub 2}. Construction DSSC used layered systems (sandwich) consists of working electrode (TiO{sub 2} semiconductor-dye) and counter electrode (platina). Both are placed on conductive glass and electrolytes that occur electrons cycle. The characterization of thin layer of TiO{sub 2} was conducted using SEM (Scanning Electron Microscpy) analysis showed the surface morphology of TiO{sub 2} thin layer and the cross section of a thin layer of TiO{sub 2} with a thickness of 15–19 μm. Characterization of natural dye extract was determined using UV-Vis spectrometry analysis shows the wavelength range annato seeds is 328–515 nm, and the voltage (V{sub oc}) and electric current (I{sub sc}) resulted in keithley test for 30 gram, 40 gram, and 50 gram were 0,4000 V; 0,4251 V; 0,4502 V and 0,000074 A; 0,000458 A; 0,000857 A, respectively. The efficiencies of the fabricated solar cells using annato seeds as senstizer for each varying mass are 0,00799%, 0,01237%, and 0,05696%.

36 MATERIALS SCIENCE↗

Vapor phase tri-methyl-indium seeding system suitable for high temperature spectroscopy and thermometry

Tri-methyl-indium (TMI) is used as an indium transport molecule to introduce indium atoms to reactive hot gas flows/combustion environments for spectroscopic diagnostics. A seeding system was constructed to allow the addition of an inert TMI laden carrier gas into an air/fuel mixture burning consequently on a burner. The amount of the seeded TMI in the carrier gas can be readily varied by controlling the vapor pressure through the temperature of the container. The seeding process was calibrated using the fluorescent emission intensity from the indium 6{sup 2}S{sub 1/2} → 5{sup 2}P{sub 1/2} and 6{sup 2}S{sub 1/2} → 5{sup 2}P{sub 3/2} transitions as a function of the calculated TMI seeding concentration over a range of 2–45 ppm. The response was found to be linear over the range 3–22.5 ppm; at concentrations above 25 ppm there is a loss of linearity attributable to self-absorption or loss of saturation of TMI vapor pressure in the carrier gas flow. When TMI was introduced into a post-combustion environment via an inert carrier gas, molecular transition from InH and InOH radicals were observed in the flame emission spectrum. Combined laser-induced fluorescence and absorption spectroscopy were applied to detect indium atoms in the TMI seeded flame and the measured atomic indium concentration was found to be at the ppm level. This method of seeding organometallic vapor like TMI to a reactive gas flow demonstrates the feasibility for quantitative spectroscopic investigations that may be applicable in various fields, e.g., chemical vapor deposition applications or temperature measurement in flames with two-line atomic fluorescence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth mechanism, surface and optical properties of ZnO nanostructures deposited on various Au-seeded thickness obtained by mist-atomization

In this paper, growth mechanisms of ZnO nanostructures on non-seeded glass, 6 nm and 12 nm Au seed layer obtained by mist-atomization was proposed. ZnO films were successfully deposited on glass substrate with different thickness of Au seed layer i.e. 6 nm and 12 nm. The surface and optical properties of the prepared samples were investigated using Field emission scanning electron microscopy (FESEM) and photoluminescence (PL). FESEM micrograph show that ZnO nanostructure deposited on 6 nm Au seed layer has uniform formation and well distributed. From PL spectroscopy, the UV emission shows that ZnO deposited on 6 nm Au seed layer has the more intense UV intensity which proved that high crystal quality of nanostructured ZnO deposited on 6 nm Au seed layer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rotational self-alignment of graphene seeds for nanoribbon synthesis on Ge(001) via chemical vapor deposition

The chemical vapor deposition of CH 4 on Ge(001) results in the anisotropic synthesis of graphene nanoribbons that are aligned to Ge$\langle$110$\rangle$ and have faceted armchair edges, sub-10 nm widths, and lengths greater than 100 nm. The utilization of small graphene seeds to initiate nanoribbon synthesis provides control over the nanoribbon placement and orientation. However, in order to exclusively grow nanoribbons and suppress the concomitant growth of lower aspect ratio crystals, it is imperative to control the crystallographic orientation of the seeds with respect to the Ge lattice. Here, we demonstrate that when seeds are less than 18 nm in diameter, they are able to rotate upon annealing at 910 °C prior to nanoribbon synthesis. The effect of this rotation on the resulting nanoribbons’ orientation is characterized as a function of the diameter and initial crystallographic orientation of the seeds. The seeds preferentially rotate to an orientation in which an armchair direction of their lattice is parallel to Ge$\langle$110$\rangle$—subsequently maximizing the anisotropy in growth kinetics. By exploiting this seed rotation phenomenon, we demonstrate the fabrication of seamless nanoribbon meshes and gain understanding that will affect future efforts to create arrays of unidirectionally aligned nanoribbons.

36 MATERIALS SCIENCE↗

THE FIRST MASSIVE BLACK HOLE SEEDS AND THEIR HOSTS

We investigate the formation of the first massive black holes (MBHs) in high redshift galaxies, with the goal of providing insights to which galaxies do or do not host MBHs. We adopt a novel approach to forming seed black holes in galaxy halos in cosmological SPH+N-body simulations. The formation of MBH seeds is dictated directly by the local gas density, temperature, and metallicity, and motivated by physical models of MBH formation. We explore seed black hole populations as a function of halo mass and redshift, and examine how varying the efficiency of MBH seed formation affects the relationship between black holes and their hosts. Seed black holes tend to form in halos with mass between 10{sup 7} and 10{sup 9} M{sub Sun }, and the formation rate is suppressed around z = 5 due to the diffusion of metals throughout the intergalactic medium. We find that the time of MBH formation and the occupation fraction of black holes are a function of the host halo mass. By z = 5, halos with mass M{sub halo} > 3 Multiplication-Sign 10{sup 9} M{sub Sun} host MBHs regardless of the efficiency of seed formation, while the occupation fraction for smaller halos increases with black hole formation efficiency. Our simulations explain why MBHs are found in some bulgeless and dwarf galaxies, but we also predict that their occurrence becomes rarer and rarer in low-mass systems.

79 ASTRONOMY AND ASTROPHYSICS↗

TESTING THE ROLE OF SNe Ia FOR GALACTIC CHEMICAL EVOLUTION OF p-NUCLEI WITH TWO-DIMENSIONAL MODELS AND WITH s-PROCESS SEEDS AT DIFFERENT METALLICITIES

The bulk of p isotopes is created in the ''gamma processes'' mainly by sequences of photodisintegrations and beta decays in explosive conditions in Type Ia supernovae (SNIa) or in core collapse supernovae (ccSN). The contribution of different stellar sources to the observed distribution of p-nuclei in the solar system is still under debate. We explore single degenerate Type Ia supernovae in the framework of two-dimensional SNIa delayed-detonation explosion models. Travaglio et al. discussed the sensitivity of p-nuclei production to different SNIa models, i.e., delayed detonations of different strength, deflagrations, and the dependence on selected s-process seed distributions. Here we present a detailed study of p-process nucleosynthesis occurring in SNIa with s-process seeds at different metallicities. Based on the delayed-detonation model DDT-a of TRV11, we analyze the dependence of p-nucleosynthesis on the s-seed distribution obtained from different strengths of the {sup 13}C pocket. We also demonstrate that {sup 208}Pb seed alone changes the p-nuclei production considerably. The heavy-s seeds (140 ≤A < 208) contribute with about 30%-40% to the total light-p nuclei production up to {sup 132}Ba (with the exception of {sup 94}Mo and {sup 130}Ba, to which the heavy-s seeds contribute with about 15% only). Using a Galactic chemical evolution code from Travaglio et al., we study the contribution of SNIa to the solar stable p-nuclei. We find that explosions of Chandrasekhar-mass single degenerate systems produce a large amount of p-nuclei in our Galaxy, both in the range of light (A ≤ 120) and heavy p-nuclei, at almost flat average production factors (within a factor of about three). We discussed in details p-isotopes such as {sup 94}Mo with a behavior diverging from the average, which we attribute to uncertainties in the nuclear data or in SNIa modeling. Li et al. find that about 70% of all SNeIa are normal events. If these are explained in the framework of explosions of Chandrasekhar-mass white dwarfs resulting from the single-degenerate progenitor channel, we find that they are responsible for at least 50% of the p-nuclei abundances in the solar system.

79 ASTRONOMY AND ASTROPHYSICS↗

One-dimensional simulation and validation of divertor detachment induced through nitrogen seeding on HL-2A

Divertor detachment is a promising method to solve the power exhaust problem in tokamak devices or even in future magnetic fusion reactors. In this work, a detachment experiment (HL-2A shot #38008) with mixed gas seeding (60% nitrogen and 40% deuterium) is simulated using the SD1D module in BOUT++. In the process from attachment to detachment, the target electron temperature and the target ion saturation current in simulations are found to be consistent with the experimental results measured by Langmuir probes on the target plate. In order to understand the underlying detachment mechanism on HL-2A, this work analyses the role of different particle species in the cases with different seeding rates. It shows that the plasma density varies little and the density of neutrals (D and D 2 ) slightly decreases with the increase of nitrogen seeding rate, such that plasma–neutral interactions cannot effectively reduce plasma energy and plasma momentum in the divertor. The case with a high seeding rate predicts that increasing seeding rate cannot reach a target temperature lower than 2.5 eV, which is the required temperature for strong plasma–molecule interactions. Thus, the plasma–molecule interactions may not be important in the divertor during nitrogen seeding. Here this work also studies the parallel forces including (1) force due to the parallel electric field, (2) friction forces, (3) ion- and electron-thermal forces, and (4) collisional reactions (e.g. charge exchange recombination and ionisation). It is found that the friction force between nitrogen ions and other particle species (primarily D + ) is the dominant force towards the target, while ion- and electron-thermal forces are the dominant force pushing nitrogen ions back to upstream. Parallel forces determine the parallel distribution of nitrogen impurities, and therefore decide the region of nitrogen radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Runaway electron seed formation at reactor-relevant temperature

Systematic variation of the pre-disruption core electron temperature (T e ) from 1 to 12 keV using an internal transport barrier scenario reveals a dramatic increase in the production of ‘seed’ runaway electrons (REs), ultimately accessing near-complete conversion of the pre-disruption current into sub-MeV RE current. Injected Ar pellets are observed to ablate more intensely and promptly as T e rises. At high T e , the observed ablation exceeds predictions from published thermal ablation models. Simultaneously, the thermal quench (TQ) is observed to significantly shorten with increasing T e —a surprising result. While the reason for the shorter TQ is not yet understood, candidate mechanisms include: insufficiently accurate thermal ablation models, enhanced ablation driven by the seed RE population, or significant parallel heat transport along stochastic fields. Kinetic modeling that self-consistently treats the plasma cooling via radiation, the induced electric field, and the formation of the seed RE is performed. Including the combined effect of the inherent dependence of hot-tail RE seeding on T e together with the shortened TQ, modeling recovers the progression towards near-complete conversion of the pre-disruption current to RE current as T e rises. Measurement of the HXR spectrum during the early current quench (CQ) reveals a trend of decreasing energy with pre-disruption T e . At the very highest T e (≈ 12 keV), ≈ 100% conversion of the thermal current to runaway current is found. The energy of this peculiar RE beam is inferred to be sub-MeV as it emits vanishingly few MeV hard x-rays (HXRs). These measurements demonstrate novel TQ dynamics as Te is varied and illustrate the limitations of treating the RE seed formation problem without considering the inter-related dependencies of the pellet ablation, radiative energy loss, and resultant variations of the TQ duration. Finally, if the observed shortening of the TQ with increasing T e extends to fusion-grade plasmas, than their propensity to form large quantities of RE seeds at high T e may be far worse than previously thought. Positively, the high T e scenario in DIII-D produces REs so prodigiously that it can serve as a meaningful new platform for demonstrating RE avoidance techniques.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗