Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Transformation of a Plane Wavefront in Hemispherical Lenses Made of Leuco-Sapphire

An algorithm for wavefront calculation of ordinary and extraordinary waves after propagation through hemispherical components made of a uniaxial crystal is developed. The influence of frequency dispersion of n{sub о} and n{sub e}, as well as change in the direction of the optic axis of the crystal, on extraordinary wavefront in hemispheres made of from leuco-sapphire and a plastically deformed analog thereof is determined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of different atomic force microscopy methods for detailed diagnostics of gold nanocoatings on a single-crystal sapphire surface

Gold nanodots and clusters deposited on sapphire substrates with a regular nanorelief have been investigated by atomic force microscopy. It is shown that the phase-contrast method combined with contact force spectroscopy makes it possible to identify these nanostructures and describe some of their physical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ordered gold nanostructures on sapphire surfaces: Fabrication and optical investigations

The possibilities of obtaining ordered gold nanoarrays on sapphire surfaces with oriented nanorelief are demonstrated. The structures are morphologically described using atomic force microscopy data. A study of the angular dependence of the reflectivity in the visible range of electromagnetic waves has revealed some features which are likely to indicate surface plasmon-polariton excitation at the air-gold interface under exposure to p-polarized radiation. The experimental results are found to be in good agreement with the theoretical calculations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Light refraction in sapphire plates with a variable angle of crystal optical axis to the surface

The modification of sapphire by inhomogeneous plastic deformation makes it possible to obtain plates with a variable angle of inclination of the crystal optical axis to the plate surface. The refraction of light in this plate at perpendicular and oblique incidence of a parallel beam of rays is considered. The algorithm of calculating the refractive index of extraordinary ray and the birefringence is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photonics of 2D gold nanolayers on sapphire surface

Gold layers with thicknesses of up to several nanometers, including ordered and disordered 2D nanostructures of gold particles, have been formed on sapphire substrates; their morphology is described; and optical investigations are carried out. The possibility of increasing the accuracy of predicting the optical properties of gold layers and 2D nanostructures using quantum-mechanical models based on functional density theory calculation techniques is considered. The application potential of the obtained materials in photonics is estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural study of He{sup +}-implanted and thermally annealed silicon-on-sapphire layers

The effect of He{sup +} ion implantation and subsequent annealing on the silicon-on-sapphire microstructure is studied by transmission electron microscopy and X-ray diffraction analysis. It is established that He{sup +} ion implantation leads to the formation of defects in the Si layer and α-Al{sub 2}O{sub 3}, while subsequent annealing causes dissociation of radiation defects in Si and formation of nanopores in α-Al{sub 2}O{sub 3}. The effect of implanted-ion dose and annealing temperature on the parameters of the porous α-Al{sub 2}O{sub 3} layer and structural quality of the Si layer is investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and strain of ZnO molecular-beam epitaxial layers on sapphire

Strains and crystalline perfection of ZnO epitaxial layers on sapphire grown by molecular-beam epitaxy were studied using high-resolution X-ray diffrac tometry. The strain state of samples was determined by curvature measurements. The structural quality of layers was analyzed by diffraction measurements in the Bragg and Laue geometry using {theta} and ({theta}-2{theta}) scanning modes. It was found that the grown layers (Zn/O > 1) are subject to biaxial tensile stresses, while stresses are absent for Zn/O < 1. The density and depth of different dislocations were calculated from the diffraction peak broadening.

36 MATERIALS SCIENCE↗

Epitaxial growth of hexagonal silicon polytypes on sapphire

The formation of a single-crystal silicon polytype is observed in silicon-on-sapphire structures by high-resolution transmission electron microscopy. The appearance of inclusions with a structure different from that of diamond is attributed to the formation of strong-twinning regions and the aggregation of stacking faults, which form their own crystal structure in the crystal lattice of silicon. It is demonstrated that the given modification belongs to the 9R silicon polytype.

36 MATERIALS SCIENCE↗

Features of the Selective Growth of GaN Nanorods on Patterned c-Sapphire Substrates of Various Configurations

The growth features of GaN nanorods on patterned c-sapphire substrates with a regular microcone array having a different density and base diameter in the ranges of (1–5) × 10{sup 7} cm{sup –2} and 2.5–3.5 μm, respectively, are investigated. The kinetics is studied and the selective-growth regimes are determined for single GaN nanorods with a diameter of 30–100 nm at the vertices of microcones under radically lower growth rates on their slopes. The effect of the configuration of microcones, the substrate temperature, the roughness of the initial surface, and the presence of indium as a surfactant on the degree of growth selectivity is investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation into the Radiation Hardness of Photodiodes Based on Silicon-on-Sapphire Structures

The electrical properties of photodiodes based on silicon-on-sapphire structures are investigated theoretically and experimentally. It is shown that they are no worse than silicon diodes in terms of their basic parameters, while their radiation hardness is higher by an order of magnitude than that of similar diodes based on bulk silicon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Domain epitaxial growth of ferroelectric films of barium strontium titanate on sapphire

A model of the epitaxial growth of crystalline multicomponent films on single-crystal substrates with a domain correspondence is presented using a solid solution of barium strontium titanate on sapphire substrates (r cut). The domain epitaxial growth suggests the matching of the lattice planes of the film and the substrate having similar structures by comparison of domain multiple of an integral number of the interplanar spacings. Variation of the component composition of the solid solution enables changes in the domain size in the range sufficient for epitaxial growth. This method can be used to project the epitaxial growth of films of various solid solutions on single-crystal substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Obtaining Iron-Oxide Films on Sapphire Substrates

Iron-oxide films on sapphire substrates were obtained using laser radiation with 1064-nm wavelength and studied by methods of scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission Mössbauer spectroscopy. The obtained Fe{sub 2}O{sub 3} films probably occur in a superparamagnetic state and may find application in gas sensors and various magnetic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of Pulsed Laser Annealing of BC{sub 3} Films on a Sapphire Substrate

The morphology, chemical composition, microstructure, and electrical properties of BC{sub 3} thin films subjected to melting by a nanosecond laser pulse are investigated. The original films have been created by pulsed laser codeposition of B and C onto a sapphire substrate at 150 and 350°C. Morphological changes in the films depended on their initial structural state. However, a “frozen” structure of both films after irradiation corresponded to the B-saturated graphite-like phase, the local composition of which varied due to the formation of inclusions of amorphous boron carbide. Before and after irradiation, the films exhibited a slightly decreasing dependence of the surface resistance with increasing temperature from 4.2 to 330 K. After laser irradiation, the films resistance has decreased by a factor of ~2.6.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermally robust and highly stable method for splicing silica glass fiber to crystalline sapphire fiber

This research reports an advancement in splicing silica glass fiber to sapphire single-crystal optical fiber (SCF) using a specialized glass processing device, including data that demonstrate the thermal stability of the splice to 1000°C. A filament heating process was used to produce a robust splice between the dissimilar fibers. A femtosecond laser is used to inscribe a fiber Bragg gratings sensor into the SCF to measure the high-temperature capabilities and signal attenuation characteristics of the splice joint. The experimental results demonstrate that the proposed splicing method produces a splice joint that is robust, stable, repeatable, and withstands temperatures up to 1000°C with a low attenuation of 0.5 dB. Here, the proposed method allows placement of SCF-based sensors in the extreme environments encountered in various engineering fields, such as nuclear, chemical, aviation, and metals manufacturing, to enable improvements in process monitoring, product quality, and production efficiency.

36 MATERIALS SCIENCE↗

Direct diode-pumped Kerr Lens 13 fs Ti:sapphire ultrafast oscillator using a single blue laser diode

We demonstrate a direct diode-pumped Kerr Lens Modelocked Ti:sapphire laser producing 13 fs pulses with 1.85 nJ energy at 78 MHz (145 mW) using a single laser diode pump. We also present a similar laser using three spectrally combined diodes, generating >300 mW output power with >50 nm bandwidth. We discuss the use of far-from TEM 00 pump laser sources, and their effect on the Kerr lens modelocking process.

43 PARTICLE ACCELERATORS↗