Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Response surface model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Comparison of theory with the experimental characterization of the spatial frequency response of interferometers using a binary pseudo-random array sample

Experimental evaluations of the surface height response of an interference microscope using a binary pseudo-random array test sample are compared with a theory based on a Fourier optics model. Measurements of key instrument characteristics, including the illumination, imaging, and obscuring apertures of three different Mirau objectives, support the theoretical calculations. Agreement between experimental and theoretical modeling confirms the predictability of the spatial frequency response for the purpose of specification and optimization of instrument configuration for specific metrology tasks. The results also provide confidence in methods of compensating for the decrease in instrument response with spatial frequency.

Calibration↗
DOE OSTI2021

Anisotropic thermal-conductivity degradation in the phase-field method accounting for crack directionality

Dynamic loads applied to metals may lead to brittle or ductile fracture depending on the imposed strain rates, material properties, and specimen geometry. With an increase in the applied velocity, brittle to ductile failure mode transition may also be observed. Furthermore, at high strain rates, ductile fracture may be preceded by shear bands, which are narrow bands of intense plastic deformation, typically accompanied by a significant rise in temperature. Reliable models are needed to predict the response of metals subject to dynamic loads. In particular, capturing the interplay between heat conduction and crack propagation using the phase-field fracture method is still an open research field. To accurately capture the heat transfer physics across crack surfaces, damage models degrading thermal-conductivity are necessary. While isotropic thermal-conductivity degradation models were proposed, they may lead to errors as they are indifferent to crack directionality. In our current work, a new anisotropic approach is proposed in which thermal-conductivity, which depends on the phase-field gradient, is degraded solely across the crack. Here, it is shown that this approach improves the near-field approximation of temperature and heat flux compared with isotropic degradation, when taking the discontinuous crack solutions as reference. Additionally, the anisotropic degradation approach is implemented in a unified dynamic fracture model and a couple of examples demonstrate the viability of this approach.

42 ENGINEERING↗
DOE OSTI2020

Evapotranspiration depletes groundwater under warming over the contiguous United States

A warmer climate increases evaporative demand. However, response to warming depends on water availability. Existing earth system models represent soil moisture but simplify groundwater connections, a primary control on soil moisture. Here we apply an integrated surface-groundwater hydrologic model to evaluate the sensitivity of shallow groundwater to warming across the majority of the US. We show that as warming shifts the balance between water supply and demand, shallow groundwater storage can buffer plant water stress; but only where shallow groundwater connections are present, and not indefinitely. As warming persists, storage can be depleted and connections lost. Similarly, in the arid western US warming does not result in significant groundwater changes because this area is already largely water limited. The direct response of shallow groundwater storage to warming demonstrates the strong and early effect that low to moderate warming may have on groundwater storage and evapotranspiration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Control over emergence and alignment of transient blisters in thermo-responsive gels using hierarchically patterned substrates

Surfaces with tunable microscale textures are vital in a large variety of technological applications, including heat transfer, antifouling and adhesion. To facilitate such broad-scale use, there is a need to create surfaces that undergo reconfigurable changes in topology and thus, enable switchable functionality. To date, there is a relative dearth of methods for engineering surfaces that can be actuated to change topography over a range of length scales, and hence, form tunable hierarchically structured layers. Combining modeling and experiments, we design a geometrically patterned, thermo-responsive poly (N-isopropylacrylamide) gel film that undergoes controllable hierarchical changes in topology with changes in temperature. At the bottom, the film is covalently bound to a solid, curved substrate; at the top, the film encompasses longitudinal rectangular ridges that are oriented perpendicular to the underlying cylindrical curves. At temperatures below lower critical solution temperature (LCST), the swollen gel exhibits 3D variations in polymer density and thickness defined by the gel's top and bottom topography. As the temperature rises above LCST, the interplay between the upper ridges and lower curves in the gel drives non-uniform, directional solvent transport, the nucleation and propagation of a phase-separated higher-density skin layer, and the resulting pressure buildup within the film. These different, interacting kinetic processes lead to an instability, which produces transient microscopic blisters in the film. Through simulations, we show how tuning the width of the ridges modifies the propagation of a skin layer and creates localized pressure build-up points, which enables control over the emergence, distribution, and alignment of the microscopic blisters. Futhermore, we provide a simple argument to predict the size of such microscopic features. Experiments confirm our predictions and further highlight how our computational model enables the rational design of topographical transitions in these tunable films. The development of actuatable, hierarchically structured films provides new routes for achieving switchable functionality in actuators, drug release systems and adhesives.

42 ENGINEERING↗
DOE OSTI2024

Mechanistic and Kinetic Analysis of Complete Methane Oxidation on a Practical PtPd/Al 2 O 3 Catalyst

A PtPd/Al 2 O 3 catalyst developed for the complete oxidation of methane from the ventilation air of underground coal mines is compared against a model PdO/Al 2 O 3 catalyst. Although the PtPd/Al 2 O 3 catalyst is substantially more active and stable than the model catalyst, the nature of active sites between the two catalysts is deemed to be fundamentally the same based on their response to different feed gas compositions and the evolution of surface CO adsorption complexes during time-resolved CO adsorption DRIFTS experiment. For both catalysts, coordinatively unsaturated Pd sites are considered the active centers for methane activation and the subsequent oxidation reaction. H 2 O competes with CH 4 for the same active sites, resulting in severe inhibition. Additionally, the CH 4 oxidation reaction also causes self-inhibition. Taking both inhibition effects into consideration, a relatively simple kinetic model is developed. The model provides a good fit of the 72 sets of kinetic data collected on the PtPd/Al 2 O 3 catalyst under practically relevant reaction conditions with CH 4 concentration in the range of 0.05–0.4%, H 2 O concentration of 1.0–5.0%, and reaction temperatures of 450–700 °C. Kinetic parameters based on the model suggest that the CH 4 activation energy on the PtPd/Al 2 O 3 catalyst is 96.7 kJ/mol, and the H 2 O adsorption energy is –31.0 kJ/mol. Both values are consistent with the parameters reported in the literature. The model can be used to develop catalyst sizing guidelines and be incorporated into the control algorithm of the catalytic system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Advanced High-Performance Computational Modeling of the Seismic Response of High-Hazard and/or Nuclear Facilities and Critical Infrastructure at the NNSS

New methods for predicting the amplitude and variability of ground shaking from earthquakes (and explosions) are needed for seismic hazard analysis for buildings, nuclear power plants, and critical infrastructure at the NNSS. We are comparing existing 1-D and new 3-D geophysical methods for estimating the shear-wave velocity structure in the upper 30 meters of the ground surface (Vs30), which plays a major role in ground motion amplification and seismic response of buildings. We evaluate the performance of these methodologies at the U1a Complex at the NNSS and develop simple 1-D and high-resolution 3-D Vs30 models. We then emplace these high-resolution models into a background seismic velocity model. We will collaborate with Lawrence Livermore National Laboratory (LLNL) to conduct numerical modeling of the ground shaking at the NNSS using their high-performance computing technology and state-of-the-art ground motion simulation methodology. The primary work that was completed in FY 2019 was to acquire the seismic systems and familiarize staff at the NNSS with their use. We also worked on developing a collection plan with the Device Assembly Facility (DAF) at the NNSS, but due to time constraints and other ongoing projects at the DAF, we had to use U1a as a backup. We were able to coordinate the seismic survey, and we will complete the collection of seismic data in FY 2020. Additionally, during FY 2019, we completed the geologic framework model (GFM) for the U1a Complex and modeled the Yucca fault. LLNL worked with us through FY 2019 to prepare the data files for their modeling software and tested the software for reliability. In FY 2020 we will develop the end-to-end capability so that any facility could easily be modeled and the expected shaking from a local earthquake understood. The work in FY 2020 will include building fault models from the GFM and finalizing the velocity model analysis. The final simulations will be run for multiple rupture models, and final assessments will demonstrate the seismic hazard at the U1a Complex.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Evaluation of liquid cloud albedo susceptibility in E3SM using coupled eastern North Atlantic surface and satellite retrievals

The impact of aerosol number concentration on cloud albedo is a persistent source of spread in global climate predictions due to multi-scale, interactive atmospheric processes that remain difficult to quantify. We use 5 years of geostationary satellite and surface retrievals at the US Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) eastern North Atlantic (ENA) site in the Azores to evaluate the representation of liquid cloud albedo susceptibility for overcast cloud scenes in the DOE Energy Exascale Earth System Model version 1 (E3SMv1) and provide possible reasons for model–observation discrepancies. The overall distribution of surface 0.2 % CCN concentration values is reasonably simulated, but simulated liquid water path (LWP) is lower than observed and layer mean droplet concentration (N d ) comparisons are highly variable depending on the N d retrieval technique. E3SMv1's cloud albedo is greater than observed for given LWP and N d values due to a lower cloud effective radius than observed. However, the simulated albedo response to N d is suppressed due to a correlation between the solar zenith angle (SZA) and N d created by the seasonal cycle that is not observed. Controlling for this effect by examining the cloud optical depth (COD) shows that E3SMv1's COD response to CCN concentration is greater than observed. For surface-based retrievals, this is only true after controlling for cloud adiabaticity because E3SMv1's adiabaticities are much lower than observed. Assuming a constant adiabaticity in surface retrievals as done in top-of-atmosphere (TOA) retrievals narrows the retrieved ln N d distribution, which increases the cloud albedo sensitivity to ln N d to match the TOA sensitivity. The greater sensitivity of COD to CCN is caused by a greater Twomey effect in which the sensitivity of N d to CCN is greater than observed for TOA-retrieved N d , and once model–observation cloud adiabaticity differences are removed, this is also true for surface-retrieved N d . The LWP response to N d in E3SMv1 is overall negative as observed. Despite reproducing the observed LWP–N d relationship, observed clouds become much more adiabatic as N d increases, while E3SMv1 clouds do not, associated with more heavily precipitating clouds that are partially but not completely caused by deeper clouds and weaker inversions in E3SMv1. These cloud property differences indicate that the negative LWP–N d relationship is likely not caused by the same mechanisms in E3SMv1 and observations. The negative simulated LWP response also fails to mute the excessively strong Twomey effect, highlighting potentially important confounding factor effects that likely render the LWP–N d relationship non-causal. N d retrieval scales and assumptions, particularly related to cloud adiabaticity, contribute to substantial spreads in the model–observation comparisons, though enough consistency exists to suggest that aerosol activation, drizzle, and entrainment processes are critical areas to focus E3SMv1 development for improving the fidelity of aerosol–cloud interactions in E3SM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Co‐Evolution of Specific Stiffness and Permeability of Rock Fractures Offset in Shear

Abstract Fractures and faults represent planes of weakness and compliance in rock masses that serve as focal points for both microearthquakes and fluid transport, with seismicity and permeability evolution closely linked. Contact stiffness is highly stress‐sensitive and directly influences permeability. We explore the co‐evolution of specific stiffness and permeability of rough fractures under normal stress and shear offset using numerical simulations. Individual rough fractures are represented by variable amplitude (Root mean square) and wavelength ( λ ) using a granular mechanics model. Contacting rough surfaces are mated, offset in shear, and then compacted in displacement mode. The compacting fractures generate stress‐dependent changes in contact porosity, which govern both permeability and stiffness evolution. We establish a universal dimensionless relationship linking specific stiffness and permeability that inherently incorporates the effects of surface roughness, shear offset, and microcracking. The observed cracking effect—where local stress redistribution and pressure‐driven microcrack propagation dynamically alter the aperture field—introduces a nonlinear permeability response at high stress. Increased roughness amplitude and larger shear offsets reduce stiffness while dampening permeability sensitivity to stress, demonstrating a strong interplay between surface texture and hydro‐mechanical behavior. While the model captures this behavior effectively, deviations emerge at very low porosities due to extreme aperture sensitivity in this limit.

He, Xinxin [Energy and Mineral Engineering Pennsyl↗
DOE OSTI2021

Machine learning enables national assessment of wind plant controls with implications for land use

Summary As deployment of wind energy continues to expand, computationally efficient tools for predicting wind plant performance over a wide range of layout designs, technology innovations, and spatial locations are increasingly important for policy and investment decisions. We demonstrate two approaches to training a surrogate model to predict annual energy production (AEP) of parameterized wind plant layouts: one using a Gaussian process (GP) and the other using a fully convolutional neural network (FCNN). We leverage the powerful FCNN architecture by encoding wind plant design parameters and output response surface as an image. The FCNN produces more accurate results than the GP with mean absolute errors equivalent to 1% and 1.9% of plant rated power, respectively, although the GP performs well under limited training data and provides useful uncertainty information. We also evaluate a surrogate model for wake steering, enabling a nationwide assessment of the impact of plant control strategies and plant layout decisions. Across two million locations, we find that wake steering strategies boost AEP with relative gains upwards of 3%. Gains are most pronounced at sites without a dominant wind direction and where layout optimization is less fruitful. Additionally, we perform a nationwide sensitivity analysis showing that wake steering can mitigate wake losses from higher density plant layouts. Our results suggest that regions which have not been previously viable for wind deployment due to moderate wind resources are especially well enhanced by wake steering strategies that could help overcome land constraints and inflexible layout options, potentially identifying new deployment opportunities.

17 WIND ENERGY↗
DOE OSTI2026

Wind Conditions for Solar Energy Facility Design Based on Field Measurements at Nevada Solar One

This study characterises near-surface wind conditions at the Nevada Solar One (NSO) concentrated solar power plant using two years of measurements from a 15-m mast located 30 m west of the solar arrays. The surrounding terrain is fairly flat within 3 km, but nearby solar photovoltaic (PV) and concentrated solar power (CSP) installations introduce strong directional wind inhomogeneity, which motivates a sector-based analysis that distinguishes undisturbed inflow from waked flow. The analysis uses data from three sonic anemometers to assess whether turbulence in the surface layer can be represented as Gaussian and whether standard surface-layer scaling remains valid below 10 m height. The roughness length and displacement height are estimated for twelve directional sectors under near-neutral wind conditions, and all three velocity components show departures from Gaussian behaviour. Spectral analysis indicates that the turbulence contains low-frequency fluctuations with amplitudes higher than those predicted by standard models such as the Kaimal model or the Simiu and Scanlan model. The study introduces a new turbulence spectral model based on the eddy-surface-layer framework to better represent near-surface wind turbulence. The analysis further quantifies the influence of the surrounding power plants on mean wind profiles, one-point spectra, and vertical coherence for all velocity components. The solar collector arrays located 30 m east of the mast significantly modify the turbulence structure, whereas PV installations situated a few hundred metres away have only a limited influence on the turbulence measured at the mast. These findings highlight the limitations of conventional turbulence models for near-surface wind over solar infrastructure and provide improved parameterisations to support the structural design. The implications for the structural response of parabolic troughs and PV modules to such turbulence remain uncertain and require further investigation.

14 SOLAR ENERGY↗
DOE OSTI2021

Doppler-Lidar Evaluation of HRRR-Model Skill at Simulating Summertime Wind Regimes in the Columbia River Basin during WFIP2

Complex-terrain locations often have repeatable near-surface wind patterns, such as synoptic gap flows and local thermally forced flows. An example is the Columbia River Valley in east-central Oregon-Washington, a significant wind-energy-generation region and the site of the Second Wind-Forecast Improvement Project (WFIP2). Data from three Doppler lidars deployed during WFIP2 define and characterize summertime wind regimes and their large-scale contexts, and provide insight into NWP model errors by examining differences in the ability of a model [NOAA’s High-Resolution Rapid-Refresh (HRRR-version1)] to forecast wind-speed profiles for different regimes. Seven regimes were identified based on daily time series of the lidar-measured rotor-layer winds, which then suggested two broad categories. First, in three regimes the primary dynamic forcing was the large-scale pressure gradient. Second, in two regimes the dominant forcing was the diurnal heating-cooling cycle (regional sea-breeze-type dynamics), including the marine intrusion previously described, which generates strong nocturnal winds over the region. The other two included a hybrid regime and a non-conforming regime. For the large-scale pressure-gradient regimes, HRRR had wind-speed biases of ~1 m s -1 and RMSEs of 2-3 m s -1 . Errors were much larger for the thermally forced regimes, owing to the premature demise of the strong nocturnal flow in HRRR. Thus, the more dominant the role of surface heating in generating the flow, the larger the errors. Major errors could result from surface heating of the atmosphere, boundary-layer responses to that heating, and associated terrain interactions. Finally, measurement/modeling research programs should be aimed at determining which modeled processes produce the largest errors, so those processes can be improved and errors reduced.

17 WIND ENERGY↗
DOE OSTI2023

NETL Plastic Pipes Project (Final Report)

Plastic or composite pipelines have been the bane of the utility locating industry because they are neither conductive nor magnetic which are the properties traditionally used to locate buried utilities. Ground penetrating radar (GPR) is an effective geophysical tool for locating plastic/composite pipelines where resistive cover allows for adequate penetration of radar energy. However, GPR has limited applicability in areas where the soil cover is conductive due to significant clay and/or salt content. This study examines complementary near-surface geophysical methods that are potentially useful for locating buried plastic/composite pipelines, either singly or in combination. Specifically, this modeling study used computational numerical methods to forward model the response of GPR, resistivity, seismic, gravity gradiometry, and photoacoustic/thermoacoustic imaging methods to plastic/composite pipelines for various scenarios including: (1) pipe diameters ranging between 2 in. to 12 in.; (2) burial depths ranging between 3 ft. to 4 ft.; (3) various degrees in contrast in physical properties (i.e., electrical permittivity, elasticity, resistivity, density); and (4) various experimental acquisition choices (e.g., GPR radar and seismic source frequencies, electrode spacing). Numerical modeling performed herein reconfirmed that GPR is the preferred method for detecting/locating plastic pipelines. A caveat for GPR detection is that the material covering the plastic pipe (trench fill material and adjacent soil) must be sufficiently resistive to allow the two-way propagation to the required depth of investigation and back to the surface. GPR was the only method modeled in this study that can be used to directly detect plastic pipelines of 2-in.-diameter and larger when buried 3-ft-deep. GPR data processing and imaging also can determine pipe depth, pipe diameter, trench dimensions, and moisture conditions. Seismic modeling results suggest that direct detection of a 12-in.-diameter plastic pipe at 3-ft.-depth may be possible under favorable conditions; however, the associated signature would be weak (e.g., surface- to S-wave, backscattered surface-waves, and/or forward scattered surface-waves to S-wave). Direct pipe detection under field conditions with noise and strong lateral geologic heterogeneity is doubtful. Numerical modeling also suggests that plastic pipelines can be indirectly located by detecting the trench in which they are buried. GPR, direct current (DC) resistivity, and seismic methods have the potential to locate the pipeline trench if there is sufficient contrast between the trench-wall and trench-fill materials for the physical property being measured by each method (i.e., electrical permittivity for GPR; resistivity for DC resistivity; or density, compressional velocity, or shear velocity for seismic). Modeling also indicated that currently available (commercial) gravity gradiometers would be unable to directly detect/locate plastic pipelines ≤ 8-in.-diameter when buried 3-ft.-deep given the typical instrument noise floor for field surveying as well as the expected density variations due to geologic heterogeneity. The numerical modeling performed in this project did not identify a universal geophysical technology that can locate buried plastic pipelines in all parts of the United States (although GPR is suggested for all areas with resistive cover). However, the project results suggest that a towed land streamer simultaneously acquiring multiple geophysical data types including multi-offset GPR, multi-channel DC resistivity, seismic geophone- and/or distributed acoustic sensing (DAS), and potentially photoacoustic/thermoacoustic data would be an appropriate platform for locating buried plastic pipeline. Moreover, the complementary multiphysics data acquired by a towed land streamer would permit the use of joint and/or cooperative inversion frameworks for a more rigorous and consistent data interpretation.

42 ENGINEERING↗
DOE OSTI2021

Evaluation of Two-Dimensional to One-Dimensional Site Response for Idaho National Laboratory

We perform two-dimensional (2D) site response analyses accounting for spatial variability of soil properties and subsurface geometry of the Eastern Snake River Plane (ESRP), and quantify their effects on ground surface motion relative to one-dimensional (1D) site response analyses at the Idaho National Laboratory (INL). We first present the development of random field idealizations of the repeated basalt lava flows, heterogeneously inter-layered with sediments, from seismic velocity data collected over four decades in the ESRP. Using realizations of the stochastic fields mapped on 2D deterministic finite element models, we perform 2D viscoelastic and equivalent-linear wave propagation simulations, and quantify the mean and variance of site response aggravation factors, defined as the response spectral ratio of 2D to 1D analyses on the ground surface. Results are shown to be insensitive to the constitutive material behavior considered here, for strains induced by rock outcrop peak ground acceleration (PGA) as high as 0.7g: viscoelastic and equivalent-linear analyses predict peak mean 2D/1D aggravation factor 1.05 at period T=0.075 sec (i.e. the 2D response spectrum is 5% higher than the corresponding 1D at that period, on average), which corresponds to the wavelength of the horizontal correlation length of the random field (50m). For periods longer than the fundamental period of the site (here, T 1 =0.3125 sec), the propagating wavelengths are too long to be affected by the 1D site response and the aggravation factor becomes equal to 1. The standard deviation of the natural logarithms of the 2D/1D aggravation factors is ~0.15 for periods shorter than the fundamental period of the site, and decays thereafter at a steady rate.

58 GEOSCIENCES↗
DOE OSTI2021

Updated respiration routines alter spatio-temporal patterns of carbon cycling in a global land surface model

Abstract We updated the routines used to estimate leaf maintenance respiration (MR) in the Energy Land Model (ELM) using a comprehensive global respiration data base. The updated algorithm includes a temperature acclimating base rate, an updated instantaneous temperature response, and new plant functional type specific parameters. The updated MR algorithm resulted in a very large increase in global MR of 16.1 Pg (38%), but the signal was not geographically uniform. The increase was concentrated in the tropics and humid warm-temperate forests. The increase in MR led to large but proportionally smaller decreases in global net primary production (19%) and in average global leaf area index (15%). The effect on global gross primary production (GPP) was a more modest 5.7 Pg (4%). A detailed site level analysis also demonstrated a wide range of effects the updated algorithm can have on the seasonal cycle of GPP. Output from the updated and old models did not differ markedly in how closely they matched a suite of benchmarks. Given the substantial impact on the land surface carbon cycle, a neutral influence on model benchmarks, and better alignment with empirical evidence, an MR algorithm similar to the one presented here should be adopted into ELM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Biogeochemical Equilibrium Responses to Maximal Productivity in High Nutrient Low Chlorophyll Regions

Whether ocean iron fertilization in high nutrient low chlorophyll (HNLC) regions is a practical geoengineering strategy to combat climate warming has been debated because the fate of absorbed carbon by the ocean remains unclear. Here, we use an optimized oceanic biogeochemical inverse model to explore the equilibrium responses to increased productivity in major HNLC regions. We find that an overall downward shift of nutrients and carbon from the surface and intermediate to the deep waters with maximal productivity in the HNLC Southern Ocean (SO), North Pacific (NP) and eastern equatorial Pacific (EP). The efficiency of soft tissue pump is increased by 37.8%, 2.7% and 5.4% in the SO, EP and NP simulation while atmospheric CO 2 concentration is drawn down by 45.1, 3.4 and 6.7 ppm, respectively. Meanwhile, global mean oxygen is decreased by 21.1%, 1.3% and 2.4% in the SO, EP and NP simulation, accompanied by an expansion of oxygen minimum zones by 400%, 26% and 63%, respectively. Our study indicates that iron fertilization has the potential to be an effective geoengineering approach to mitigate climate warming but also has a strong impact on the development of ocean hypoxia.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

E3SM‐GCAM: A Synchronously Coupled Human Component in the E3SM Earth System Model Enables Novel Human‐Earth Feedback Research

Abstract Modeling human‐environment feedbacks is critical for assessing the effectiveness of climate change mitigation and adaptation strategies under a changing climate. The Energy Exascale Earth System Model (E3SM) now includes a human component, with the Global Change Analysis Model (GCAM) at its core, that is synchronously coupled with the land and atmosphere components through the E3SM coupling software. Terrestrial productivity is passed from E3SM to GCAM to make climate‐responsive land use and CO 2 emission projections for the next 5‐year period, which are interpolated and passed to E3SM annually. Key variables affected by the incorporation of these feedbacks include land use/cover change, crop prices, terrestrial carbon, local surface temperature, and climate extremes. Regional differences are more pronounced than global differences because the effects are driven primarily by differences in land use. This novel system enables a new type of scenario development and provides a powerful modeling framework that facilitates the addition of other feedbacks between these models. This system has the potential to explore how human responses to climate change impacts in a variety of sectors, including heating/cooling energy demand, water management, and energy production, may alter emissions trajectories and Earth system changes. Plain Language Summary Earth system models help us understand how humans are changing the climate. Currently, these models do not include human systems, so predetermined greenhouse gas, aerosol, and land use change data are input to these models. These data do not reflect human responses to changes projected by Earth system models. We have added a human component to an Earth system model to represent human responses to environmental change and calculate corresponding greenhouse gas and land use change data instead of using predetermined data. Including this human component changes projections of land use, land carbon storage, and regional climate. Key Points We have incorporated a novel, advanceable human component in an Earth system model to simulate human‐Earth feedbacks Including terrestrial productivity feedbacks from the Earth to the human systems affects land change, crop prices, carbon, and climate Regional effects of including terrestrial productivity feedbacks are greater than global effects because land change is the main driver

E3SM↗
DOE OSTI2026

Indirect climate impacts of the Hunga eruption

Injection of sulfur and water vapour by the Hunga volcanic eruption significantly altered chemical composition and radiative budget of the stratosphere. Yet, whether the eruption could also affect surface climate, especially via indirect pathways, remains poorly understood. Here we investigate these effects using large ensembles of simulations with the CESM2(WACCM6) Earth system model, incorporating interactive chemistry and aerosols in both coupled ocean and atmosphere-only configurations. We find some statistically significant extratropical regional climate responses to the eruption driven by circulation changes; these are partially linked to the modulation of El Niño–Southern Oscillation, and its associated teleconnections, and to perturbations of the stratospheric polar vortex in both hemispheres. The stratospheric anomalies affect surface climate through modulating the North Atlantic Oscillation in the Northern Hemisphere (up to three boreal winters following the eruption) and the Southern Annular Mode in the Southern Hemisphere in late 2023. The latter is partly related to a concurrent reduction in Antarctic ozone, as increased stratospheric aerosols and water vapor reach the polar vortex. Our study suggests that the eruption could have had a non-negligible influence on regional surface climate, and discusses the mechanisms via which such an influence could occur. However, the results also highlight that this forcing is relatively weak compared to interannual variability, and is subject to model uncertainties in the representation of key processes. More research is thus needed before definitive statements on the role of the eruption in contributing to surface climate and weather events in the following years are made.

Geosciences↗
DOE OSTI2024

Improved subseasonal-to-seasonal precipitation prediction of climate models with nudging approach for better initialization of Tibetan Plateau-Rocky Mountain Circumglobal wave train and land surface conditions

Abstract Reliable subseasonal-to-seasonal (S2S) precipitation prediction is highly desired due to the great socioeconomical implications, yet it remains one of the most challenging topics in the weather/climate prediction research area. As part of the Impact of Initialized Land Temperature and Snowpack on Sub-seasonal to Seasonal Prediction (LS4P) project of the Global Energy and Water Exchanges (GEWEX) program, twenty-one climate models follow the LS4P protocol to quantify the impact of the Tibetan Plateau (TP) land surface temperature/subsurface temperature (LST/SUBT) springtime anomalies on the global summertime precipitation. We find that nudging towards reanalysis winds is crucial for climate models to generate atmosphere and land surface initial conditions close to observations, which is necessary for meaningful S2S applications. Simulations with nudged initial conditions can better capture the summer precipitation responses to the imposed TP LST/SUBT spring anomalies at hotspot regions all over the world. Further analyses show that the enhanced S2S prediction skill is largely attributable to the substantially improved initialization of the Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train pattern in the atmosphere. This study highlights the important role that initial condition plays in the S2S prediction and suggests that data assimilation technique (e.g., nudging) should be adopted to initialize climate models to improve their S2S prediction.

54 ENVIRONMENTAL SCIENCES↗