Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resonator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Measurement of a high electrical quality factor in a niobium resonator for a gravitational radiation detector

The mechanical and electrical quality factors of a 10-g niobium resonator were measured at 4.4 K and were found to be 8.1 x 10 to the 6th, and 3.8 x 10 to the 6th, respectively. The value for the electrical quality factor is high enough for a system operating at 50 mK at a sensitivity level of one phonon. The resonator's low damping properties make it suitable for use as a transducer for a cryogenic three-mode gravitational radiation detector. A practical design is given for the mounting of the resonator on a 2400-kg aluminum-bar detector. Projections are made for the sensitivity of a 2400-kg bar instrumented as a three-mode system with this resonator inductively coupled to a SQUID.

Folkner, W. M.↗
NASA NTRS1988

Radial Alfven velocity profiles in the magnetosphere and their relation to ULF wave field-line resonances

The radial Alfven velocity, V(A), in the magnetosphere was investigated using magnetic field and plasma data from the ISEE-1 spacecraft. The harmonic frequency structure calculated from these data was compared with the observed resonant wave structure in the frequency range 5-100 mHz and over the region L = 3-9. It was found that the frequency of these resonances depend on the A(V), which is a function of the magnetic field strength and plasma density. The toroidal mode resonance frequency structure was modeled for the first four harmonics, with excellent agreement between the modeled and observed harmonics for a passs which does not show a plasmapause gradient. In the presence of a steep plasmapause gradient, the model was found to predict a correspondingly steep increase in the resonance frequencies at the plasmapause, by about 5 mHz for the first harmonic and by 20 mHz for the fourth harmonic. Special consideration is given to the effect of heavy ion mass loading on the modeling.

Fraser, B. J.↗
NASA NTRS1989

A design procedure for the phase-controlled parallel-loaded resonant inverter

High-frequency-link power conversion and distribution based on a resonant inverter (RI) has been recently proposed. The design of several topologies is reviewed, and a simple approximate design procedure is developed for the phase-controlled parallel-loaded RI. This design procedure seeks to ensure the benefits of resonant conversion and is verified by data from a laboratory 2.5 kVA, 20-kHz converter. A simple phasor analysis is introduced as a useful approximation for design purposes. The load is considered to be a linear impedance (or an ac current sink). The design procedure is verified using a 2.5-kVA 20-kHz RI. Also obtained are predictable worst-case ratings for each component of the resonant tank circuit and the inverter switches. For a given load VA requirement, below-resonance operation is found to result in a significantly lower tank VA requirement. Under transient conditions such as load short-circuit, a reversal of the expected commutation sequence is possible.

King, Roger J.↗
NASA NTRS1990

Performance and modeling of superconducting ring resonators at millimeter-wave frequencies

Microstrip ring resonators operating at 35 GHz were fabricated from laser ablated YBCO thin films deposited on lanthanum aluminate substrates. They were measured over a range of temperatures and their performance compared to identical resonators made of evaporated gold. Below 60 Kelvin the superconducting strip performed better than the gold, reaching an unloaded Q approximately 1.5 times that of gold at 25 K. A shift in the resonant frequency follows the form predicted by the London equations. The Phenomenological Loss Equivalence Method is applied to the ring resonator and the theoretically calculated Q values are compared to the experimental results.

Bhasin, K. B.↗
NASA NTRS1989

Computer simulation of Alfven resonance in a cylindrical, axially bounded flux tube

The resonant absorption of Alfven waves in an axially bounded cylindrical flux tube is investigated in a dissipative MHD simulation. It is found that in an axially bounded flux tube, in contrast to an infinite periodic model, the resonant frequency is nearly independent of the poloidal component of the magnetic field. This is a consequence of the 'ballooning' structure of the resonant Alfven waves. The scaling with resistivity and viscosity of the width of the resonance layer, the dissipation rate, and the time for steady state absorption to occur, are all in agreement with theory.

Strauss, H. R.↗
NASA NTRS1990

Resonant decay of global MHD modes at 'thick' interfaces

A global surface mode can exist on a 'surface' which is not a true discontinuity, but without sufficient dissipation it is not a normal mode and it decays in time via resonance absorption. The decay rate can be calculated analytically when the 'surface' is thin. The goal of this paper is to numerically estimate the decay rate when the surface is not thin. A cold plasma in a uniform magnetic field is considered in which density varies linearly across the 'surface'. In this linearized calculation, the global surface mode is driven in steady state by an antenna located in one of the uniform regions external to the surface. The frequency is a free parameter, and resonance curves are computed numerically without approximations. The widths of the resonance curves are used to estimate the free decay times of undriven surface modes, via the uncertainty principle. When applied to the active solar corona, the decay rates are large enough to account for the coronal heating, but it should be kept in mind that the role of nonlinearity in resonance absorption is still undetermined.

Hollweg, Joseph V.↗
NASA NTRS1990

Flow-induced resonance of screen-covered cavities

An experimental study of screen-covered cavities exposed to airflow tangent to the screen is described. The term screen refers to a thin metal plate perforated with a repetitive pattern of round holes. The purpose was to find the detailed aerodynamic and acoustic mechanisms responsible for screen-covered cavity resonance and to find ways to control the pressure oscillations. Results indicate that strong cavity acoustic resonances are created by screen orifices that shed vortices which couple resonance by choosing hole spacings such that shed vortices do not arrive at a downstream orifice in synchronization with cavity pressure oscillations. The proper hole pattern is effective at all airspeeds. It was also discovered that a reduction of orifice size tended to weaken the screen/cavity interaction regardless of hole pattern, probably because of viscous flow losses at the orifices. The screened cavities that resonated did so at much higher frequencies than the equivalent open cavity. The classical large eddy phenomenon occurs at the relatively small scale of the orifices (the excitation is typically of high frequency). The wind tunnel study was made at airspeeds from 0 to 100m/sec. The 457-mm-long by 1.09-m-high rectangular cavities had length-to-depth ratios greater than one, which is indicative of shallow cavities. The cavity screens were perforated in straight rows and columns with hole diameters ranging from 1.59 to 6.35 mm and with porosities from 2.6 to 19.6 percent.

Soderman, Paul T.↗
NASA NTRS1989

The prediction of pseudo-resonance positions in the Schwinger variational principle

The Schwinger Variational Principle is appled to s-wave electron-hydrogen atom scattering. It is shown computationally, that, consistent with a paper by B. Apagyi, P. Levay, and K. Ladanyi, there are pseudo-resonances at the static exchange level of approximation, but not at the static level. The T-matrix was employed, as well as, the K-matrix version of the Schwinger Principle, with a real Slater basis, and obtained the same results in both. The origin of the pseudo-resonances as resulting from singularities in the separable potential that is effectively employed in the Lippmann-Schwinger equation from which the Schwinger Variational Principle can be derived. The determination of the pseudo-resonance parameters from the separable potential is computationally inexpensive and may be used to predict the pseudo-resonance parameters for the scattering calculations so that they may be avoided.

Weatherford, Charles A.↗
NASA NTRS1990

Capture probabilities for secondary resonances

A perturbed pendulum model is used to analyze secondary resonances, and it is shown that a self-similarity between secondary and primary resonances exists. Henrard's (1982) theory is used to obtain formulas for the capture probability into secondary resonances. The tidal evolution of Miranda and Umbriel is considered as an example, and significant probabilities of capture into secondary resonances are found.

Malhotra, Renu↗
NASA NTRS1991

1,3P(0) resonance states in positronium ions

The complex-rotation method was used to calculate doubly excited 1,3P(0) autodetaching resonances in Ps(-). The wave function is of the Hylleraas type with number of terms up to 1330, and Feshbach resonances connected with the positronium n = 4, 5, and 6 thresholds are reported. The study has also identified 1P(0) shape resonances connected with the n = 4 and 6 thresholds and a 3P(0) shape resonance connected with the n = 5 threshold.

Ho, Y. K.↗
NASA NTRS1991

YBCO superconducting ring resonators at millimeter-wave frequencies

Microstrip ring resonators operating at 35 GHz were fabricated from laser ablated YBCO films deposited on lanthanum aluminate substrates. They were measured over a range of temperatures and their performances compared to identical resonators made of evaporated gold. Below 60 Kelvin the superconducting strip performed better than the gold, reaching an unloaded Q approximately 1.5 times that of gold at 25 K. A shift in the resonant frequency follows the form predicted by the London equations. The Phenomenological Loss Equivalence Method is applied to the ring resonator and the theoretically calculated Q values are compared to the experimental results.

Chorey, Christopher M.↗
NASA NTRS1992

Optical distributed sensors for feedback control: Characterization of photorefractive resonator

The aim of the project was to explore, define, and assess the possibilities of optical distributed sensing for feedback control. This type of sensor, which may have some impacts in the dynamic control of deformable structures and the monitoring of small displacements, can be divided into data acquisition, data processing, and control design. Analogue optical techniques, because they are noninvasive and afford massive parallelism may play a significant role in the acquisition and the preprocessing of the data for such a sensor. Assessing these possibilities was the aim of the first stage of this project. The scope of the proposed research was limited to: (1) the characterization of photorefractive resonators and the assessment of their possible use as a distributed optical processing element; and (2) the design of a control system utilizing signals from distributed sensors. The results include a numerical and experimental study of the resonator below threshold, an experimental study of the effect of the resonator's transverse confinement on its dynamics above threshold, a numerical study of the resonator above threshold using a modal expansion approach, and the experimental test of this model. A detailed account of each investigation, including methodology and analysis of the results are also included along with reprints of published and submitted papers.

Indebetouw, Guy↗
NASA NTRS1992

Non-Hamiltonian perturbations of integrable systems and resonance trapping

This paper studies general, non-Hamiltonian perturbations of integrable systems with two degrees of freedom and derives conditions for temporary and permanent resonance trapping. The analysis involves a noncanonical transformation of variables near the resonant manifold and averaging with respect to the fast phase to investigate oscillatory behavior on the intermediate timescale. The resulting reduced system is Hamiltonian to leading order and permits, after averaging on the intermediate, or libration, timescale, a canonical transformation to action-angle variables in the oscillation zone. The final system so obtained reveals the possible existence of two- and three-dimensional invariant tori in the vicinity of the resonant manifold. An explicit divergence condition for general perturbations to be dissipative on the slow timescale follows from the analysis. An application of this approach to the problem of resonant trapping and escape is outlined for the restricted problem of three bodies subject to dissipative perturbations with a radial symmetry.

Ghil, M.↗
NASA NTRS1993

Ultra-stable, low phase noise dielectric resonator stabilized oscillators for military and commercial systems

EPSD has designed, fabricated and tested, ultra-stable, low phase noise microwave dielectric resonator oscillators (DRO's) at S, X, Ku, and K-bands, for potential application to high dynamic range and low radar cross section target detection radar systems. The phase noise and the temperature stability surpass commercially available DROs. Low phase noise signals are critical for CW Doppler radars, at both very close-in and large offset frequencies from the carrier. The oscillators were built without any temperature compensation techniques and exhibited a temperature stability of 25 parts per million (ppm) over an extended temperature range. The oscillators are lightweight, small and low cost compared to BAW & SAW oscillators, and can impact commercial systems such as telecommunications, built-in-test equipment, cellular phone and satellite communications systems. The key to obtaining this performance was a high Q factor resonant structure (RS) and careful circuit design techniques. The high Q RS consists of a dielectric resonator (DR) supported by a low loss spacer inside a metal cavity. The S and the X-band resonant structures demonstrated loaded Q values of 20,300 and 12,700, respectively.

Mizan, Muhammad↗
NASA NTRS1992

A quasioptical resonant-tunneling-diode oscillator operating above 200 GHz

We have fabricated and characterized a quasioptically stabilized resonant-tunneling-diode (RTD) oscillator having attractive performance characteristics for application as a radiometric local oscillator. The fundamental frequency of the oscillator is tunable from about 200 to 215 GHz, the instantaneous linewidth is between 10 and 20 kHz, and the output power across the tuning band is about 50 micro-W. The narrow linewidth and fine tuning of the frequency are made possible by a scanning semiconfocal open cavity which acts as the high-Q resonator for the oscillator. The cavity is compact, portable, and insensitive to vibration and temperature variation. The total dc power consumption (RTD plus bias supply) is only 10 mW. The present oscillator provides the highest power obtained to date from an RTD above 200 GHz. We attribute this partly to the use of the quasioptical resonator, but primarily to the quality of the RTD. It is fabricated from the In(0.53)Ga(0.47)As/AlAs materials system, which historically has yielded the best overall resonant-tunneling characteristics of any material system. The RTD active area is 4 sq microns, and the room-temperature peak current density and peak-to-valley current ratio are 2.5x10(exp 5) A cm(exp -2) and 9, respectively. The RTD is mounted in a WR-3 standard-height rectangular waveguide and is contacted across the waveguide by a fine wire that protrudes through a via hole in a Si3N4 'honeycomb' overlayer. We estimate that the theoretical maximum frequency of oscillation of this RTD is approximately 1.1 THz, and that scaled-down versions of the same quasioptical oscillator design should operate in a fundamental mode up to frequencies of at least 500 GHz.

Brown, E. R.↗
NASA NTRS1991

An electro-optic resonant modulator for coherent optical communication

A resonant cavity electro-optic phase modulator has been designed and implemented to operate at a data rate of 10 Mbps. The modulator consists of an electro-optic crystal located in a highly resonant cavity. The cavity is electro-optically switched on and off resonance, and the phase dispersion near the cavity resonance provides the output phase modulation. The performance of the modulator was measured by first heterodyne detecting the signal to an intermediate frequency, and measuring the spectral characteristics using an RF spectrum analyzer. The measured phase shift is shown to be in good agreement with the theoretical predictions. Further theoretical analysis shows that the design of the modulator can be scaled to operate at 100 Mbps.

Robinson, D. L.↗
NASA NTRS1992

Detection and characterization of fatigue cracks in thin metal plates by low frequency resonant model analysis

Low-frequency resonant model analysis, a technique for the detection and characterization of fatigue cracks in thin metal plates, which could be adapted to rapid scan or large area testing, is considered. Experimental data displaying a direct correlation between fatigue crack geometry and resonance frequency for the second vibrational plate mode are presented. FEM is used to calculate the mechanical behavior of the plates, and provides a comparison basis for the experimentally determined resonance frequency values. The waveform of the acoustic emission generated at the resonant frequency is examined; it provides the basis for a model of the interaction of fatigue crack faces during plate vibration.

Wincheski, B.↗
NASA NTRS1993

10-Mbps electro-optic resonant phase modulator

A resonant cavity electro-optic phase modulator has been designed and implemented to operate at a data rate of 10 Mbps. The modulator consists of an electro-optic crystal located in a highly resonant cavity. The cavity is electro-optically switched on and off resonance, and the phase dispersion near the cavity resonance provides the output phase modulation. The performance of the modulator was measured by first heterodyne-detecting the signal to an intermediate frequency and then measuring the spectral characteristics using an rf spectrum analyzer. The measured phase shift is shown to be in good agreement with the theoretical predictions. Further theoretical analysis shows that the design of the modulator can be scaled to operate at 100 Mbps.

Robinson, D. L.↗