SEARCH · Engineering Papers

Results for “Renewable Hydrogen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Formation of Gas-Phase Allyl Radicals from Glycerol on Rutile TiO2(110)

The reaction pathways of glycerol on partially reduced TiO2(110) have been studied by a combination of molecular beam dosing and temperature-programmed desorption (TPD). Glycerol is found to bind more strongly to TiO2(110) than glycols due to an additional hydroxyl group in the molecule. When the Ti surface sites are saturated by glycerol, the majority of glycerol molecules (~ 95%) undergo further reactions to yield carbon-free (water and hydrogen) and carbon-containing products that are desorbed during the TPD ramp. In contrast to glycols for which both water and hydrogen arise exclusively from the cleavage of glycol O-H bonds, we identify two distinct reaction channels resulting from the cleavage of O-H and C-H bonds, respectively, for both water and hydrogen evolution from glycerol on TiO2(110). Quantitative determination of the desorption yields of water and hydrogen reveals that the C-H bond scission channel which occurs at higher temperature than the O-H bond scission channel, is a minor reaction channel for water formation, while it is a major reaction channel responsible for hydrogen evolution. For the carbon-containing products, we exclude both carbon deposition and carbon oxides (CO and CO2) formation, and identify the allyl radical as the major carbon-containing product. The formation of the allyl radical is accompanied by the formation of various minor carbon-containing products including propylene, acrolein, allyl alcohol, acetone, formaldehyde and ethylene. The different surface chemistries observed between glycerol and simpler alcohols and glycols on TiO2(110), suggest that smaller oxygenates cannot serve as models for larger oxygenates in probing their reaction pathways on oxide surfaces. The new reaction channels observed for glycerol on TiO2(110) may open up a new way to convert bio-renewable glycerol directly to pure hydrogen and hydrocarbons on TiO2. This work was supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences, and performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

Chen, Long↗

DOE OSTI2025

Hydrogen Storage with Aluminum Formate, ALF: Experimental, Computational, and Technoeconomic Studies

Long-duration storage of hydrogen is necessary for coupling renewable H2 with stationary fuel cell power applications. In this presentation, I will discuss how aluminum formate, Al(HCOO)3 (ALF), which adopts an ReO3-type structure, is shown to have remarkable H2 storage performance at non-cryogenic (> 120 K) temperatures and low pressures. The most promising performance of ALF is found between 120 K and 160 K and at 10 bar to 20 bar. The talk will cover and illustrate the H2 adsorption performance of ALF over the 77 K to 296 K temperature range using gas isotherms, in situ neutron powder diffraction, and DFT calculations, as well as technoeconomic analysis (TEA), illustrating ALF’s competitive performance for long-duration storage versus compressed hydrogen and leading metal–organic frameworks. In the TEA, it is shown that ALF’s storage capacity, when combined with a temperature/pressure swing process, has advantages versus compressed H2 at a fraction of the pressure (15 bar versus 350 bar). Given ALF’s performance in the 10 bar to 20 bar regime under moderate cooling, it is particularly promising for use in safe storage systems serving fuel cells, and is currently the only MOF that works in this moderate temperature range/ low pressure regime to be cost competitive with compressed H2 gas for large scale H2 storage.[1]

Chemistry↗

DOE OSTI2026

Facilitating Data Collection of Maintenance Events to Populate the Hydrogen Component Reliability Database (HyCReD)

The Hydrogen Component Reliability Database (HyCReD) is a collaborative project between the National Renewable Energy Laboratory, the University of Maryland, and hydrogen stakeholders to improve safety and reliability for hydrogen facilities by implementing component reliability data taxonomies that support hydrogen infrastructure failure rate analysis. The project aims to quantify failure rates of hydrogen components through high-quality data collection and analysis on root causes and maintenance needed. HyCReD provides a common database for cataloging hydrogen component failures which exists for reliability research in many other mature industries [2]. The database fills a gap for the hydrogen community by providing a scientifically rigorous approach to quantitative risk assessment (QRA), prognostic health management (PHM), and reliability-centered maintenance (RCM) analysis. High level results will be aggregated and anonymized to protect company sensitive information; detailed results will be used to help address issues of hydrogen components. These advanced analytics will support accelerated deployment of hydrogen infrastructure by enabling better: design and safety of projects (safety codes and standards development), infrastructure reliability and cost (component failure rates, maintenance protocols), and component R&D needs (robust supply chain). A key to a successful HyCReD implementation is facilitating the ease of reporting and data quality in the database that can be used for analysis. Maintenance data was a previously identified gap in initial efforts to populate and validate the database taxonomies [3]. Collection of maintenance data will be instrumental in identifying failure modes and rates, identifying incipient component failures or reduced performance, cataloging best practices for maintenance routines and methods for prognostic health management, and quantifying the risk and effect of different failure modes. Several key priorities are identified for streamlined data collection to achieve quality and detailed failure data: Applicability, Ease of Use, Accessibility, and Information Security. The HyCReD team has now begun deployment of the database to several companies and groups that have signed non-disclosure agreements to facilitate the data collection of failures in industry hydrogen refueling station infrastructure. This paper will provide an update into the process of HyCReD deployment including the development of a coding guide for facility personnel to reference and ensure data quality and consistency from one station to another as well as implementation of contextually dependent data fields of system taxonomy and formatted entries to provide ease of use. The goal is to communicate the lessons learned from the roll-out to technicians and engineers in the field, and the addition of need for high level of security to protect all stakeholders.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Hydrogen Component Reliability Database (HyCReD)

availability↗

DOE OSTI2024

Underground hydrogen storage resource assessment for the Cook Inlet, Alaska

Underground hydrogen storage will be essential to a hydrogen economy. This work focuses on the challenge of identifying and screening candidate storage systems, given the unique behavior of hydrogen in the subsurface. Here, we describe a resource assessment methodology and apply it to Alaska’s Cook Inlet region. Alaska provides an interesting case study because of its abundant renewable energy resources, relatively low energy demand, and isolated electrical grid. The assessment framework considers each site’s ability to (1) store a specific volume, (2) physically-contain the stored gas, and (3) limit biogeochemical activity. We estimate that reservoirs in the Cook Inlet area could theoretically store a total of 286 TWh (or 8.6 million tonnes [Mt]) in hydrogen working gas in 92 pools. This is likely sufficient to meet both local hydrogen demand and support an array of exportable products. We further identify seven pools that may be especially well-suited for hydrogen storage. Broadly, this work demonstrates a framework for regional resource assessments. On a finer scale, this work supports an early demonstration of porous–media hydrogen storage in the United States.

08 HYDROGEN↗

DOE OSTI2023

Channeling Engineering of Hydroxide Ion Exchange Polymers and Reinforced Membranes

In this project, a team of researchers from Rensselaer Polytechnic Institute developed high performance alkaline conductors which can improve efficiency and lower cost of energy storage and conversion technology. The Rensselaer Polytechnic Institute team has developed a highly ion conductive, chemically stable, and mechanically durable alkaline membrane materials. Such membranes will serve as a critical component in electrochemical devices when energy was generated from renewable sources (e.g., sun and wind) or hydrogen fuel. The use of alkaline membrane in electrochemical reactions allows to replace expensive platinum catalyst to less expensive, earth abundant metals as catalysts, offering huge economic advantages in renewable energy technology.

08 HYDROGEN↗

DOE OSTI2024

Metal-facilitated, sustainable nitroarene hydrogenation under ambient conditions

Hydrogenation is a critical reaction in the chemical industry, yielding a range of important compounds such as fine chemicals, pharmachemicals and agrochemicals. However, conventional hydrogenation typically requires pressurized hydrogen, high temperatures and involves noble metal catalysts. Here, we proposed a two-step hydrogenation process, utilizing water as the hydrogen source for the industrially important reduction of nitroarenes to anilines. A metal or reduced metal oxide, which can be obtained from solar thermal or electrochemical reduction, acts as the active site for nitrobenzene adsorption, H 2 O dissociation and in-situ hydrogen generation. Among the 15 metal and reduced metal oxides investigated, Zn and Sn emerged as highly efficient catalysts for the reduction of a broad range of organic nitro compounds under mild conditions, with H 2 utilization efficiency 1-2 orders of magnitude above the state-of-the-art. The presented protocol provides extra dimensions for designing and optimizing conventional hydrogenation process with an alternative pathway. The reactive hydrogen atoms generated in-situ effectively overcome the barriers associated with hydrogen gas dissolution and its subsequent dissociation on the catalyst surface, thereby greatly enhancing the overall effectiveness for the hydrogenation reaction. This research potentially establishes a sustainable, generally applicable alternative to conventional hydrogenation methods, simultaneously presenting a viable solution for renewable energy storage.

25 ENERGY STORAGE↗

DOE OSTI2021

Performance and cost analysis of liquid fuel production from H 2 and CO 2 based on the Fischer-Tropsch process

Electro-fuels can be produced from concentrated sources of carbon dioxide and hydrogen using electricity generated from renewable sources; this process enables energy storage at high volumetric energy density. Among the electro-fuels options, FT (Fischer-Tropsch) fuel is attractive for heavy-duty trucks and non-road transportation applications. This study conducts a techno-economic analysis of FT liquid fuel production from H 2 and CO 2 using a detailed performance analysis. Minimum fuel selling price is estimated for a broad range of H 2 and CO 2 prices and for a range of potential CO 2 credits. The analysis indicates that H 2 price has the largest impact on the minimum selling price of FT fuel. FT fuel production with a CO 2 price of $17.3/metric ton requires an H 2 price of $0.8/kg to be cost-competitive with the pre-tax petroleum diesel price of $3.1/gal in 2050 (before the application of any CO 2 credits). When the H 2 price is $2.0/kg from central water electrolysis (2020 target), the minimum selling price of the FT fuel is $5.4–5.9/gal. A sensitivity analysis shows that future system optimization of FT fuel production could focus on improving the H 2 and CO 2 recycle contributions and FT fuel conversion ratio. The analysis results can be combined with various upstream systems for H 2 and CO 2 production.

08 HYDROGEN↗

DOE OSTI2023

Thermochemical processes for CO 2 hydrogenation to fuels and chemicals: Challenges and opportunities

This manuscript discusses the potential use of CO 2 as a carbon and oxygen carrier to return it to the carbon life cycle in the form of fuels or chemicals via thermochemical catalytic pathways. Theoretically, CO 2 hydrogenation can form a variety of fuels and chemicals. Practically, however, the selectivity, conversion, operating range, and kinetic limitations and operational cost determine the end product. Because of their high value and versatility as a chemical or fuel, small olefins (i.e., C 2 H 4 ) and methanol are often considered as target species. Whether alcohol or olefin formation, CH 4 and CO are the nature’s primary choices of CO 2 conversion. They can be formed over a wide operating temperature, pressure, and CO 2 :H 2 ratios. They are often competitive carbon species in olefin or methanol formation steps. Although they are less valuable as end products, they can be used as intermediate species. Secondary processes of CO and CH 4 to form chemicals and fuels can increase the overall CO 2 hydrogenation yield. Independent of the choice of end product, CO 2 hydrogenation requires hydrogen. Pure hydrogen derived mostly from fossil fuels adds to the overall process cost and also increases the CO 2 emissions. Hydrogen produced from water electrolysis is a renewable green pathway but is limited by the process efficiency and cost. As an alternative to pure hydrogen, low-value, small chain paraffins are suggested as the hydrogen carriers. Carbon dioxide–assisted oxidative dehydrogenation of paraffins to olefins process is a direct pathway to olefin formation. The paper discusses these potential pathways for CO 2 utilization based on theoretical analysis and recent advances in academia and industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A Hydrogen Load Modeling Method for Integrated Hydrogen Energy System Planning: Preprint

The integrated hydrogen energy system incorporates hydrogen energy into the power grid, which has been recognized as a promising option for reaching a 100% renewable electricity supply. It can make a profit because the hydrogen produced can be sold as fuel or used to generate electricity for grid services. In this paper, we develop a planning model for the integrated hydrogen energy system that considers the uncertainty of the load demand, the renewable energy generation, and the market prices. To calculate the hydrogen load, we simulate the refueling operations at a hydrogen fueling station over the course of one day. Moreover, the long-term profitability of the integrated system under both cur-rent and future conditions is compared in the planning results.

active distribution network↗

DOE OSTI2023

Design and operating principles for high-performing anion exchange membrane water electrolyzers

Anion-exchange-membrane water electrolyzers (AEMWEs) provide a promising pathway to utilize low-carbon renewable electricity to produce clean hydrogen at high efficiency and purity, while maintaining low system costs compared to incumbent technologies. Though significant progress has been made in developing membranes and catalysts, AEMWEs still require better performance and durability to realize widespread deployment. Here, we overcome these challenges by decoupling anode and cathode polarization behavior via integration of a reference electrode in the membrane-electrode assembly. This measurement identified that the mass-transport losses dominate the cathode overpotential if feeding with electrolytes, while kinetic losses dominate the anode overpotential. These losses are mitigated by varying electrode properties and operating strategies, where a more hydrophobic, optimal loaded cathode, a high porosity anode, and operating with the cathode dry exhibited the best performance. These findings eventually enabled achieving a high-performing and durable complete PGM-free AEMWE operating at 1.5 Acm –2 for over 500h with negligible degradation, demonstrating significant progress for AEMWEs.

25 ENERGY STORAGE↗

DOE OSTI2024

Dynamic Promotion of the Oxygen Evolution Reaction via Programmable Metal Oxides

Hydrogen gas is a promising renewable energy storage medium when produced via water electrolysis, but this process is limited by the sluggish kinetics of the anodic oxygen evolution reaction (OER). Herein, we used a microkinetic model to investigate promoting the OER using programmable oxide catalysts (i.e., forced catalyst dynamics). We found that programmable catalysts could increase current density at a fixed overpotential (100–600× over static rates) or reduce the overpotential required to reach a fixed current density of 10 mA cm –2 (45–140% reduction vs static). In our kinetic parametrization, the key parameters controlling the quality of the catalytic ratchet were the O*-to-OOH* and O*-to-OH* activation barriers. Furthermore, our findings indicate that programmable catalysts may be a viable strategy for accelerating the OER or enabling lower-overpotential operation, but a more accurate kinetic parametrization is required for precise predictions of performance, ratchet quality, and resulting energy efficiency.

Catalysts↗

DOE OSTI2025

Co-sputtered CuNi heteroatomic electrocatalyst for enhanced 5-hydroxymethylfurfural selective electrochemical conversion

The electrochemical conversion of biomass-derived 5-hydroxymethylfurfural (HMF) represents a promising, economically viable, and environmentally sustainable approach for producing value-added chemicals using renewable energy and in situ hydrogen generated through water electrolysis. However, the electrochemical hydrogenation (ECH) of HMF remains challenging due to the inherently low catalytic activity and selectivity of the electrodes, compounded by competition with the kinetically favored hydrogen evolution reaction (HER) in aqueous electrolytes. In this work, we demonstrate that Cu x Ni 100−x heteroatomic thin films, fabricated via direct current (DC) magnetron co-sputtering, achieve a more than one order of magnitude increase in the HMF to 2,5-Bis-hydroxymethylfuran (BHMF) conversion rate, with nearly 50% faradic efficiency (FE) for BHMF, when compared to pure Cu and Ni electrodes (~ 10% BHMF FE). Our results suggest that the synergistic interaction between Cu and Ni creates an optimal catalytic environment for both HMF and adsorbed hydrogen (H ads ) species, thereby enhancing BHMF formation through the ECH pathway.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Correlation between oxygen evolution reaction activity and surface compositional evolution in epitaxial La 0.5 Sr 0.5 Ni 1– x Fe x O 3– δ thin films

Water electrolysis can use renewable electricity to produce green hydrogen, a portable fuel and sustainable chemical precursor. Improving electrolyzer efficiency hinges on the activity of the oxygen evolution reaction (OER) catalyst. Earth-abundant, ABO 3 -type perovskite oxides offer great compositional, structural, and electronic tunability, with previous studies showing compositional substitution can increase the OER activity drastically. However, the relationship between the tailored bulk composition and that of the surface, where OER occurs, remains unclear. Here, we study the effects of electrochemical cycling on the OER activity of La 0.5 Sr 0.5 Ni 1– x Fe x O 3– δ ( x = 0–0.5) epitaxial films grown by oxide molecular beam epitaxy as a model Sr-containing perovskite oxide. In this work, electrochemical testing and surface-sensitive spectroscopic analyses show Ni segregation, which is affected by electrochemical history, along with surface amorphization, coupled with changes in OER activity. Our findings highlight the importance of surface composition and electrochemical cycling conditions in understanding OER performance, suggesting common motifs of the active surface with high surface area systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Process intensification for generating and decomposing formic acid, a liquid hydrogen carrier

We preview two processes that facilitate using formic acid (HCOOH) as a liquid hydrogen carrier to store renewably-generated electrical energy and then release it to generate electrical power cleanly for backup or emergency applications. First, we show that simultaneously oxidizing an organic solute (typically a waste stream) can assist the electrochemical synthesis of formic acid by lowering the cell potential. The electrolyser comprises a hybrid 3-chamber PEM stack that reduces CO₂ via a gas-diffusion cathode boosted by the oxidation of aqueous methanol. However, the extent of the boosting needs to be optimized across the whole operation of the cell. Next, we present results from an intensified reactor for decomposing formic acid back into H₂ and CO₂ at elevated pressure so that the H₂ can be used in a fuel cell. The reactor combines three operations: Vaporization of the formic acid, its decomposition, and separation of the product stream. Their close coupling affords energy savings and a compact design that could be mounted on a mobile skid. We briefly discuss the electrode catalyst that facilitates the first process and two thermally activated catalysts (Ir supported on covalent triazine framework and Pd supported on carbon) that enable the second process.

25 ENERGY STORAGE↗

DOE OSTI2025

High Efficiency Reversible Solid Oxide System (Final Technical Report)

This report was generated based upon work supported by the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) under the Hydrogen and Fuel Cell Technologies Office, H2@Scale Initiative, Award Number DE-EE0008847. In this project, FuelCell Energy studied the design and performance of a system rated for 15kWe Charge/3 kWe Discharge energy storage system based on reversible solid-oxide technology.

08 HYDROGEN↗

DOE OSTI2025

From Pollutant Removal to Renewable Energy: MoS2-Enhanced P25-Graphene Photocatalysts for Malathion Degradation and H2 Evolution

The widespread presence of pesticides—especially malathion—in aquatic environments presents a major obstacle to conventional remediation strategies, while the ongoing global energy crisis underscores the urgency of developing renewable energy sources such as hydrogen. In this context, photocatalytic water splitting emerges as a promising approach, though its practical application remains limited by poor charge carrier dynamics and insufficient visible-light utilization. Herein, we report the design and evaluation of a series of TiO2-based ternary nanocomposites comprising commercial P25 TiO2, reduced graphene oxide (rGO), and molybdenum disulfide (MoS2), with MoS2 loadings ranging from 1% to 10% by weight. The photocatalysts were fabricated via a two-step method: hydrothermal integration of rGO into P25 followed by solution-phase self-assembly of exfoliated MoS2 nanosheets. The composites were systematically characterized using X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. Photocatalytic activity was assessed through two key applications: the degradation of malathion (20 mg/L) under simulated solar irradiation and hydrogen evolution from water in the presence of sacrificial agents. Quantification was performed using UV-Vis spectroscopy, gas chromatography–mass spectrometry (GC-MS), and thermal conductivity detection (GC-TCD). Results showed that the integration of rGO significantly enhanced surface area and charge mobility, while MoS2 served as an effective co-catalyst, promoting interfacial charge separation and acting as an active site for hydrogen evolution. Nearly complete malathion degradation (~100%) was achieved within two hours, and hydrogen production reached up to 6000 µmol g−1 h−1 under optimal MoS2 loading. Notably, photocatalytic performance declined with higher MoS2 content due to recombination effects. Overall, this work demonstrates the synergistic enhancement provided by rGO and MoS2 in a stable P25-based system and underscores the viability of such ternary nanocomposites for addressing both environmental remediation and sustainable energy conversion challenges.

Chemistry↗

DOE OSTI2024

Hierarchically Structured Catalysts Toward Sustainable Hydrogen Economy: Electro‐ and Thermo‐Chemical Pathways

Abstract Hydrogen, as an important clean energy source, plays a more and more crucial role in decarbonizing the planet and meeting the global climate challenge due to its high energy density and zero‐emission. The demand for sustainable hydrogen is increasing drastically worldwide as driven by the global shift towards low‐carbon energy solutions. Thermochemical catalysis process dominates hydrogen production at scale given its relatively mature technology and commercialization status, as well as the established manufacturing infrastructure. While due to its environmentally friendly nature and growing abundant sources of renewable electricity, the electrochemical path for hydrogen production is rising as a major alternative to the thermochemical means. Nevertheless, hierarchically structured catalysts and devices have gradually taken the center stage toward replacing the traditional counterparts, especially with the rapid advancement of the design and manufacture of such ordered nanostructure assemblies toward high activity, efficient mass transport, and superb stability. In this review, the latest progress of the hierarchically structured catalysts for hydrogen production have been surveyed on electro‐ and thermo‐ chemical pathways comparatively. It covers the structure designs of atomic dispersion, nanoscale surfaces and interfaces for achieving highly active and durable catalysts, components, and devices. Both electrochemical and thermochemical approaches are reviewed in terms of the vast design details, engineered benefits, and understandings of various Pt‐group metal (PGM) and non‐PGM based transition metal catalysts for hydrogen production. As the growing trend, brief discussions are also presented toward the high‐level assembly and manufacture of complexly structured components and devices at scale in the electrochemical and thermochemical energy systems.

Deng, Chenxin↗