Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reacting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

A planar reacting shear layer system for the study of fluid dynamics-combustion interaction

A versatile planar reacting shear layer facility is constructed at NASA-Lewis. The research objectives, as well as design, instrumentations and the operational procedures developed for the system are described. The fundamental governing equations and the type of quantitative information that are needed from experiments are described. Additionally, a review of earlier work is presented. Whenever appropriate, comparisons are made with similar systems in other facilities and the main differences are described. Finally, the nonintrusive measurement techniques (PLIF, PMS, LDV, and Schlieren photography) and the type of experiments that are planned are described.

Marek, C. J.↗
NASA NTRS1990

Reacting flows

Features of chemically reacting separated hypersonic flows are identified and issues concerning their analysis and simulation are discussed. Emphasis is placed on flows of high temperature dissociating and ionizing air and current methods for studying and characterizing these flows, including separation, are reviewed. The aeroassist orbital transfer vehicle and its flight trajectory are used for illustration. Thermochemical nonequilibrium phenomena are emphasized and extension of continuum analysis to the high altitude slip-flow regime is considered.

Deiwert, George S.↗
NASA NTRS1990

Linear stability of the reacting mixing layer

This work is aimed at understanding the stability of reacting mixing layers. Linear instability is analyzed for a wide variety of mixing layers to study the effects of the heat release. Analytic functions as well as laminar solutions of thin shear layer equations are used as the base flows. Both temporal and spatial developing layers are investigated. The laminar solutions are more consistent than the analytic functions. The stability properties are sensitive to the mean profiles. Including variable transport properties changes the mean profiles considerably. Chemical reaction during the instability is not very important; its primary effect is to change the laminar profiles. New modes are found in the outer part of the layer when the heat release is significant, and become dominant for large heat release. In general, heat release stabilizes the center mode but the outer mode is less affected.

Shin, D. S.↗
NASA NTRS1990

Chemically reacting supersonic flow calculation using an assumed PDF model

This work is motivated by the need to develop accurate models for chemically reacting compressible turbulent flow fields that are present in a typical supersonic combustion ramjet (SCRAMJET) engine. In this paper the development of a new assumed probability density function (PDF) reaction model for supersonic turbulent diffusion flames and its implementation into an efficient Navier-Stokes solver are discussed. The application of this model to a supersonic hydrogen-air flame will be considered.

Farshchi, M.↗
NASA NTRS1989

Three-dimensional calculation of supersonic reacting flows using an LU scheme

A new three-dimensional numerical program incorporated with comprehensive real gas property models was developed to simulate supersonic reacting flows. The code employs an implicit finite volume, Lower-Upper (LU) time-marching method to solve the complete Navier-Stokes and species equations in a fully-coupled and very efficient manner. A chemistry model with nine species and eighteen reaction steps are adopted in the program to represent the chemical reaction of H2 and air. To demonstrate the capability of the program, flow fields of underexpanded hydrogen jets transversely injected into supersonic air stream inside the combustors of scramjets are calculated. Results clearly depict the flow characteristics, including the shock structure, separated flow regions around the injector, and the distribution of the combustion products.

Yu, Sheng-Tao↗
NASA NTRS1991

Shock strength effects on separated flows in non-equilibrium chemically reacting air - Shock wave/boundary layer interaction

This work is part of a general study to examine the effects of nonequilibrium chemical reactions on hypersonic separated flows. In particular, the work presented is the first attempt to quantitatively predict the effects of impinging shock strength on the separation region in non-equilibrium chemically reacting air over a flat plate. Of special interest is the local heat transfer rate to the plate at the reattachment point. The effects of chemically non-equilibrium on the flow field are assessed by making direct comparisons to the results calculated assuming a calorically perfect flow. Chemical reactions are found to increase heat transfer rates, and this increase becomes significantly larger as Reynolds number increases.

Ballaro, Charles A.↗
NASA NTRS1991

Stability of compressible reacting mixing layer

Linear instability of compressible reacting mixing layers is analyzed with emphasis on the effects of heat release and compressibility. Laminar solutions of the compressible boundary-layer equations are used as the base flows. The parameters of this study are the adiabatic flame temperature, the Mach number of the upper stream, frequency, wavenumber, and the direction of propagation of the disturbance wave. Stability characteristics of the flow are presented. Three groups of unstable modes are found when the Mach number and/or heat release are large. Finally, it is shown that the unstable modes are two-dimensional for large heat release even in highly compressible flow.

Shin, D. S.↗
NASA NTRS1991

A time-accurate implicit method for chemically reacting flows at all Mach numbers

The objective of this work is to develop a unified solution algorithm capable of treating time-accurate chemically reacting flows at all Mach numbers, ranging from molecular diffusion velocities to supersonic speeds. A rescaled pressure term is used in the momentum equation to circumvent the singular behavior of pressure at low Mach numbers. A dual time-stepping integration procedure is established. The system eigenvalues become well behaved and have the same order of magnitude, even in the very low Mach number regime. The computational efficiency for moderate and high speed flow is competitive with the conventional density-based scheme. The capabilities of the algorithm are demonstrated by applying it to selected model problems including nozzle flows and flame dynamics.

Withington, J. P.↗
NASA NTRS1991

Scalar dissipation and mixing in turbulent reacting flows

The mixing term that appears in probability density function-based formulations of the statistical behavior of turbulent reacting flows was studied with the use of direct numerical simulations of an irreversible, second-order, isothermal chemical reaction between initially segregated reactants in decaying, homogeneous turbulence. Three-dimensional, time-dependent pseudospectral calculations with 64-cubed Fourier modes were made as well as were Monte Carlo simulations of the joint concentration pdf equations for coalescence-dispersion (C/D) models. It was found that the development of the scalar microscales depends largely on the initial concentration distributions (both isotropic and nonisotropic distributions were used) and is relatively independent of the reaction rate constant. Joint concentration probability density functions were compared to predictions of D/D models that make use of parameters evaluated from the nonreacting or inert system.

Leonard, Andy D.↗
NASA NTRS1991

Stability of low-speed reacting flows

Small perturbation, linear, inviscid stability theory is developed and applied to coflowing chemically reacting jets. A necessary condition for the existence of axisymmetric and azimuthal instabilities is derived. The eigenfunction structure provides considerable insight into the underlying physical mechanism. In nonpremixed cases, high temperature tends to occur in regions where the shear layer tries to roll up; this reduces the available momentum, suppressing the growth of instabilties. It is found that chemical reaction during the growth of instabilities is unimportant, suggesting that this effect could be ignored in a viscous theory. Both nonpremixed and premixed flames in axisymmetric shear layers are generally more stable to small perturbations than in the corresponding cold case. However, while for nonpremixed flames the frequency of the most amplified wave decreases with increasing heat release, the opposite occurs for premixed cases.

Mahalingham, S.↗
NASA NTRS1990

Stability theory for chemically reacting flows

Linear stability theory for chemically reacting (equilibrium and nonequilibrium) flows is applied to study the stability of hypersonic boundary layers under the equilibrium assumption. The results for Mach 15 flow indicate that the second mode instability shifts to lower frequencies, as compared to the perfect gas results. The peak second mode growth rate is also increased for the equilibrium gas model. However, the results for Goertler instability show very little real gas effect. The present theory has been applied to a sphere-cone flight transition experiment performed at freestream Mach of about 20.

Malik, Mujeeb R.↗
NASA NTRS1991

HANA - A three-dimensional Navier-Stokes code for chemically reacting flows

A recently developed computer program for analyzing chemically reacting flows is described. The program uses a diagonal implicit algorithm to solve the equations of viscous flow for a gas in thermochemical nonequilibrium. The diagonal scheme eliminates the expense of inverting large block matrices that arise when species conservation equations are introduced. The program uses multiple zones of grids patched together and includes a k-epsilon turbulence model. Solutions are presented for hypersonic flows of air, hypersonic flows of Martian atmospheric gases, combusting flows of hydrogen/air mixtures, and combusting flows of methane/air mixtures.

Imlay, Scott T.↗
NASA NTRS1991

Analysis of losses in supersonic mixing and reacting flows

A method for analyzing flow losses and thrust potential in supersonic combustors is presented. This method relies on a complete and consistent one-dimensional representation of a three-dimensional flow-field. Numerical results for flush wall fuel injection into a Mach 3 flow are examined and comparisons are made with experimental measurements of fuel concentration. Mixing results for a swept injection ramp, a straight (unswept) injection ramp, and a thirty degree downstream-directed flush wall jet in the same combustor duct are analyzed. The flow loss/thrust potential of the flush wall jet and the swept ramp are investigated (based on reacting solutions) using computed combustor effectiveness. The wall jet displays slightly higher thrust potential than the swept ramp at the end of the combustor.

Riggins, D. W.↗
NASA NTRS1991

Progress of simulations for reacting shear layers

An attempt was made to develop a high speed, chemically reactive shear layer test rig. The purpose of the experiment was to study the mixing of oxidizer and fuel streams in reacting shear layers for various density, velocity, and Mach number. The primary goal was to understand the effects of the compressibility upon mixing and combustion in a fundamental way. Therefore, a two-dimensional shear layer is highly desirable for its simplicity to quantify the compressibility effects. The RPLUS 2D code is used to calculate the flow fields of different sections of the test rig. The emphasis was on the supersonic nozzle design, the vitiation process for the hot air stream and the overall thermodynamic conditions of the test matrix. The k-epsilon turbulence model with wall function was successfully implemented in the RPLUS code. The k and epsilon equations are solved simultaneously and the LU scheme is used to make it compatible with the flow solver.

Yu, Sheng-Tao↗
NASA NTRS1991

Three-dimensional calculations of supersonic reacting flows using an LU scheme

A 3-D numerical program that incorporates comprehensive real gas property models was developed to simulate supersonic reacting flows. The code employs an implicit, finite volume, Lower-Upper (LU), time-marching method to solve the complete Navier-Stokes and species equations in a fully-coupled and efficient manner. A chemistry model with 9 species and 18 reaction steps is adopted in the program to represent the chemical reactions of H2 and air. To demonstrate the capability of the program, flow fields of underexpanded hydrogen jets transversely injected into the supersonic airstream inside the combustors of scramjets are calculated. Results clearly depict the flow characteristics, including the shock structure, the separated flow regions around the injector, and the distribution of the combustion products.

Yu, Sheng-Tao↗
NASA NTRS1991

Spectral simulations of reacting turbulent flows

Spectral methods for simulating flows are reviewed, emphasizing their recent applications to reacting flow problems. Various classifications of spectral methods and their convergence properties are described and the 'spectral element' method is presented, highlighting its flexibility in dealing with complex flow geometries. The applications considered include chemical reactions in homogeneous turbulence, temporally evolving mixing layers, variable-density simulations, nonequilibrium chemistry, and spatially evolving mixing layers.

Mcmurtry, Patrick A.↗
NASA NTRS1992

Product formation in chemically-reacting turbulent jets

Results from experiments performed in a newly-constructed High Pressure Combustion Facility are presented. The experiments described here are designed to address Reynolds number effects on turbulent mixing and entrainment, and flame length in an axisymmetric, gas-phase turbulent reacting jet, in particular, over a large range of Reynolds numbers.

Gilbrech, Richard J.↗