Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REDOX REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Impacts of Environmental Nanoparticles on Chemical, Biological and Hydrological Processes in Terrestrial Ecosystems

This chapter provides insights on nanoparticle (NP) influence or control on the extent and timescales of single or coupled physical, chemical, biological and hydrological reactions and processes that occur in terrestrial ecosystems. Examples taken from the literature that show how terrestrial NPs may determine the fate of the aqueous and sorbed (adsorbed or precipitated) chemical species of nutrients and contaminants, are also included in this chapter. Specifically, in the first section, chapter objectives, term definitions and discussions on size-dependent properties, the origin and occurrence of NP in terrestrial ecosystems and NP toxicity, are included. In the second section, the topic of the binary interactions of NPs of different sizes, shapes, concentrations and ages with the soil solution chemical species is covered, focusing on NP formation, stability, aggregation, ability to serve as sorbents, or surface-mediated precipitation catalysts, or electron donors and acceptors. In the third section, aspects of the interactions in the ternary systems composed of environmental NP, nutrient/contaminant chemical species, and the soil/sediment matrix are discussed, focusing on the inhibitory and catalytic effects of environmental NP on nutrient/contaminant advective mobility and mass transfer, adsorption and desorption, dissolution and precipitation and redox reactions that occur in terrestrial ecosystems. These three review sections are followed by a short summary of future research needs and directions, the acknowledgements, the list of the references, and the figures.

54 ENVIRONMENTAL SCIENCES↗

The neuroprotective action of pyrroloquinoline quinone against glutamate-induced apoptosis in hippocampal neurons is mediated through the activation of PI3K/Akt pathway

Pyrroloquinoline quinone (PQQ), a cofactor in several enzyme-catalyzed redox reactions, possesses a potential capability of scavenging reactive oxygen species (ROS) and inhibiting cell apoptosis. In this study, we investigated the effects of PQQ on glutamate-induced cell death in primary cultured hippocampal neurons and the possible underlying mechanisms. We found that glutamate-induced apoptosis in cultured hippocampal neurons was significantly attenuated by the ensuing PQQ treatment, which also inhibited the glutamate-induced increase in Ca2+ influx, caspase-3 activity, and ROS production, and reversed the glutamate-induced decrease in Bcl-2/Bax ratio. The examination of signaling pathways revealed that PQQ treatment activated the phosphorylation of Akt and suppressed the glutamate-induced phosphorylation of c-Jun N-terminal protein kinase (JNK). And inhibition of phosphatidylinositol-3-kinase (PI3K)/Akt cascade by LY294002 and wortmannin significantly blocked the protective effects of PQQ, and alleviated the increase in Bcl-2/Bax ratio. Taken together, our results indicated that PQQ could protect primary cultured hippocampal neurons against glutamate-induced cell damage by scavenging ROS, reducing Ca2+ influx, and caspase-3 activity, and suggested that PQQ-activated PI3K/Akt signaling might be responsible for its neuroprotective action through modulation of glutamate-induced imbalance between Bcl-2 and Bax. - Research Highlights: >PQQ attenuated glutamate-induced cell apoptosis of cultured hippocampal neurons. >PQQ inhibited glutamate-induced Ca{sup 2+} influx and caspase-3 activity. >PQQ reduced glutamate-induced increase in ROS production. >PQQ affected phosphorylation of Akt and JNK signalings after glutamate injury. >PI3K/Akt was required for neuroprotection of PQQ by modulating Bcl-2/Bax ratio.

60 APPLIED LIFE SCIENCES↗

Fe-single atom catalysts facilitate fast electron transfer with MoS 2 /SnS 2 cathodes in lithium–sulfur batteries

Lithium–sulfur batteries (LSBs) emerge as promising next-generation energy storage systems offering cost-effectiveness, environmental friendliness, and high theoretical energy density. The practical implementation of LSBs faces significant hindrances due to the shuttle effect and sluggish redox reactions. To address these challenges, single-atom catalyst (SAC) based combination materials from d-block elements can offer increased active catalytic sites, rapid charge transfer, accelerated electron migration, and fast sulfur redox conversion kinetics of lithium polysulfides (LiPSs). In this study, we fabricated three different LSB cathodes: pure S, S@MoS 2 /SnS 2 , and S@Fe–MoS 2 /SnS 2 . These cathodes were then used to explore the cycle life, capacity, rate capability, and redox kinetic reactions of LiPSs while assessing the influence of Fe-SACs on their performance. As a result, LSBs with S@Fe–MoS 2 /SnS 2 cathodes demonstrate an extended cycle life of 1000 cycles at a C-rate of 0.2C, maintaining a capacity close to 500 mA h g −1 , the highest initial discharge capacity of 1622 mA h g −1 and 1066 mA h g −1 at 0.05C and 0.2C, and excellent rate capabilities of 708 mA h g −1 and 558 mA h g −1 at 1C and 2C, respectively. The synergistic effect of the Fe-SAC-based combination cathode (S@Fe–MoS 2 /SnS 2 ) creates plentiful adsorptive and highly active catalytic sites, resulting in substantially enhanced capacity for adsorbing soluble long-chain LiPSs. This facilitates ultra-fast redox kinetics, surpassing the performance of the S@MoS 2 /SnS 2 and pure S cathodes. In the ex situ analysis, results from powder X-ray diffraction (XRD) to observe the new phase, soft X-ray absorption spectroscopy (XAS) to investigate the electronic structure, and hard X-ray photoelectron microscopy (HAXPES) with different energies (900 eV, 2000 eV, and 6000 eV) to track the chemical-state evolution of Fe-SACs in MoS 2 /SnS 2 cathodes displayed notable electrochemical reversibility involving S 8 ⇄ LiPSs ⇄ Li 2 S conversion even after 1000 cycles. Additionally, in situ, operando Raman analysis can unveil a novel catalytic mechanism of Fe-SACs in MoS 2 /SnS 2 “facilitating rapid electron transfer” during the discharge and charge processes of LSBs involving the conversion of S 8 ⇄ long-chain LiPSs ⇄ Li 2 S 2 /Li 2 S. This study elucidates the working mechanism of Fe-SAC cathodes, offering insights into overcoming the shuttle effect and facilitating sulfur redox kinetics to advance commercial LSBs.

36 MATERIALS SCIENCE↗

Effect of glass-batch makeup on the melting process

The response of a glass batch to heating is determined by the batch makeup and in turn determines the rate of melting. Batches formulated for a high-alumina nuclear waste to be vitrified in an all-electric melter were heated at a constant temperature-increase rate to determine changes in melting behavior in response to the selection of batch chemicals and silica grain-size as well as the addition of heat-generating reactants. The type of batch materials and the size of silica grains determine how much, if any, primary foam occurs during melting. Small quartz grains, 5-μm in size, caused extensive foaming because their major portion dissolved at temperatures <800°C, contributing to the formation of viscous glass-forming melt that trapped evolving batch gases. Primary foam did not occur in batches with larger quartz grains, ±75 μm in size, because their major portion dissolved at temperatures >800°C when batch gases no longer evolved. The exothermal reaction of nitrates with sucrose was ignited at a temperature as low as 160°C and caused a temporary jump in temperature of several hundred degrees. Secondary foam, the source of which is oxygen from redox reactions, occurred in all batches of a limited composition variation involving five oxides, B 2 O 3 , CaO, Li 2 O, MgO, and Na 2 O. The foam volume at the maximum volume-increase rate was a weak function of temperature and melt basicity. Neither the batch makeup nor the change in glass composition had a significant impact on the dissolution of silica grains. The impacts of primary foam generation on glass homogeneity and the rate of melting in large-scale continuous furnaces have yet to be established via mathematical modeling and melter experiments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrolyte Effect on the Electrochemical Performance of Mild Aqueous Zinc-Electrolytic Manganese Dioxide Batteries

Recently, mild aqueous rechargeable Zn-MnO 2 batteries have attracted increasing interest for energy storage due to the appealing attributes of low cost of Zn and Mn resource and high safety and environmental benignity. Despite extensive types of MnO 2 have been proposed for cathodes, the different reported performance, complex synthesis methods and lacking a thorough understanding of reactions in MnO 2 cathodes greatly hinder their practical applications for long life energy storage. Here we demonstrate the low cost and commercially available electrolytic manganese dioxide (EMD) as a promising and reversible cathode for mild aqueous rechargeable Zn-MnO 2 batteries through a rational manipulation of redox reactions in EMD cathode. In optimal Zn(TFSI)2-based electrolyte, the EMD cathode exhibits a mixed diffusion controlled conversation relation between EMD and H + and diffusion-free pseudocapacitance-like reactions without phase change. This mechanism enables EMD cathode with excellent cycling stability over 5000 cycles with a capacity retention of 94%. This study provides new opportunity to develop mild aqueous Zn-MnO 2 batteries with low cost and high-performance cathode materials by a rational control of the reaction mechanisms.

25 ENERGY STORAGE↗

First-Principles Calculation of Thermodynamic Stability of Acids and Bases under pH Environment: A Microscopic pH Theory

Despite being one of the most important thermodynamic variables, pH has yet to be incorporated into first-principles thermodynamics to calculate stability of acidic and basic solutes in aqueous solutions. By treating the solutes as defects in homogeneous liquids, we formulate a first-principles approach to calculate their formation energies under proton chemical potential, or pH, based on explicit molecular dynamics. The method draws analogy to first-principle calculations of defect formation energies under electron chemical potential, or Fermi energy, in semiconductors. From this, we propose a simple pictorial representation of the general theory of acid-base chemistry. By performing first-principles molecular dynamics of liquid water models with solutes, we apply the formulation to calculate formation energies of various neutral and charged solutes such as H{sup +}, OH{sup -}, NH{sub 3}, NH{sub 4}{sup +}, HCOOH, and HCOO{sup -} in water. The deduced auto-dissociation constant of water and the difference in the pKa values of NH{sub 3} and HCOOH show good agreement with known experimental values. Our first-principles approach can be further extended and applied to other bio- and electro-chemical molecules such as amino acids and redox reaction couples that could exist in aqueous environments to understand their thermodynamic stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Group III-nitride nanowire structures for photocatalytic hydrogen evolution under visible light irradiation

The performance of photochemical water splitting over the emerging nanostructured photocatalysts is often constrained by their surface electronic properties, which can lead to imbalance in redox reactions, reduced efficiency, and poor stability. We have investigated the impact of surface charge properties on the photocatalytic activity of InGaN nanowires. By optimizing the surface charge properties through controlled p-type dopant (Mg) incorporation, we have demonstrated an apparent quantum efficiency of ∼17.1% and ∼12.3% for InGaN nanowire arrays under visible light irradiation (400 nm–490 nm) in aqueous methanol and in the overall neutral-pH water splitting reaction, respectively.

36 MATERIALS SCIENCE↗

Engineering a highly dispersed core@shell structure for efficient photocatalysis: A case study of ternary novel BiOI@MIL-88A(Fe)@g-C3N4 nanocomposite

Highlights: • Novel ternary BiOI@MIL-88A(Fe)@g-C{sub 3}N{sub 4} core@shell photocatalyst is reported. • Photocatalytic degradation mechanism of organic pollutants is investigated. • It is divulged that the photodegradation is increased by BiOI supporting. • Core@shell structure of MIL-88A(Fe)@g-C{sub 3}N{sub 4} causes high activity. • Strong visible light absorption and electron transfer improve activity. - Abstract: Ternary novel BiOI@MIL-88A(Fe)@g-C{sub 3}N{sub 4} nanocomposite with core@shell structure was successfully synthesized by hydrothermal method. Fabricated photocatalysts were characterized and results confirmed the formation of MIL-88A(Fe)@g-C{sub 3}N{sub 4} core@shell structure and subsequently BiOI decoration on the surface of MIL-88A(Fe)@g-C{sub 3}N{sub 4}. Photocatalytic performances of prepared samples were investigated for degradation of Acid Blue 92 (AB92), Rhodamine B (RhB) and phenol under visible irradiation. It is clearly demonstrated that the as-prepared ternary BiOI@MIL-88A(Fe)@g-C{sub 3}N{sub 4} composites exhibits exceptional visible-light photocatalytic activities for cationic, anionic as well as neutral pollutant molecules compared to the widely accepted outstanding g-C{sub 3}N{sub 4}. It is mainly proved that the exceptional photocatalytic efficiencies are comprehensively ascribed to the porous structure of MIL-88A(Fe)@g-C{sub 3}N{sub 4}, greatly promoted charge separation and introduced catalytic functions to the carrier-related redox reactions by decorating BiOI and coupling g-C{sub 3}N{sub 4}, to modulate holes and electrons. Additionally, studies performed using radical scavengers showed the main reactive species in the photocataytic reaction for all chemical pollutant degradation.

36 MATERIALS SCIENCE↗

EPR studies of in vivo radical production by 3,3',5,5'-tetrabromobisphenol A (TBBPA) in the Sprague-Dawley rat

Brominated flame retardants (BFRs) are present in many consumer products ranging from fabrics to plastics and electronics. Wide use of flame retardants can pose an environmental hazard and it is of interest to determine the mechanism of their toxicity. Of all the BFRs, 3,3',5,5'-tetrabromobisphenol A (TBBPA) is produced in the largest volume. Previous studies by Szymanska et al. (2000) have shown that TBBPA is hepatotoxic in rats. We report here that when TBBPA (100 or 600 mg/kg) dissolved in DMSO and {alpha}-(4-pyridyl-1-oxide)-N-t-butylnitrone (POBN) was administered ip to male Sprague-Dawley rats the POBN/{center_dot}CH{sub 3} spin adduct was detected by electron paramagnetic resonance (EPR) in the bile. When {sup 13}C-DMSO was employed the POBN/{center_dot}C{sup 13}H{sub 3} adduct was observed. Also present in the bile was the 2,6-dibromobenzosemiquinone radical derived from 2,6-dibromohydroquinone, a known metabolite of TBBPA. Reaction of the 2,6-dibromobenzosemiquinone radical with oxygen would generate superoxide from which hydrogen peroxide can form by dismutation. The hydroxyl radical generated via the Fenton reaction from hydrogen peroxide reacts in vivo with DMSO to give the methyl radical which is trapped by POBN. These observations suggest that the hepatotoxicity of TBBPA in rats may be due to the in vivo generation of the hydroxyl radical as a result of redox reactions involving the TBBPA metabolite 2,6-dibromohydroquinone and its corresponding semiquinone radical.

60 APPLIED LIFE SCIENCES↗

Actinide Binding by Kläui Ligands: REDOX Speciation and Sorption on an Extraction Chromatography Resin

The sorption of Eu(III) and actinide ions in various oxidation states from nitric acid solutions by an extraction chromatography resin containing 1 wt% of the Kläui ligand Cp*Co[P(O)(OR)2]3– [Cp* = pentamethylcyclopentadienyl, R = –CH2 CH2CH3] on Amberlite® XAD-7HP was examined. At 0.3 M HNO3 and a metal-to-ligand ratio of 0.07, the relative affinity of the resin for the ions investigated followed the order: tetravalent >> hexavalent > trivalent > pentavalent; however, the relative affinity for the trivalent and hexavalent ions can be reversed, depending on the extent of ligand loading and the nitric acid concentration. The sorption of the tetravalent ions was exceptionally strong in the entire range of nitric acid concentration examined (0.2 to 8 M HNO3). Resin samples loaded with various actinide ions were examined spectrophotometrically. No Np(V) and Pu(III) species were identified on the resin; rather, reduction-oxidation (REDOX) reactions occurred during equilibration, resulting in their complete conversion to M(IV) species bound by the Kläui ligand. Similarly, the sorption behavior of Pu(VI) and Np(VI) was complicated by their reduction to M(IV) upon sorption. The observed REDOX processes were apparently driven by the extremely high affinity of the Kläui ligand for the tetravalent ions. The acid-base properties of the methyl derivative of the Kläui ligand were investigated in aqueous solution, and its pKa was found to be highly dependent upon the solution ionic strength. The binding constants of this ligand with various actinide ions measured in a mixed methanol/carbon tetrachloride solvent exhibited qualitative agreement with the sorption selectivity trends.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Applications of Time-Resolved Synchrotron X-ray Diffraction to Cation Exchange, Crystal Growth and Biomineralization Reactions

Advances in the design of environmental reaction cells and in the collection of X-ray diffraction data are transforming our ability to study mineral-fluid interactions. The resulting increase in time resolution now allows for the determination of rate laws for mineral reactions that are coupled to atomic-scale changes in crystal structure. Here we address the extension of time-resolved synchrotron diffraction techniques to four areas of critical importance to the cycling of metals in soils: (1) cation exchange; (2) biomineralization; (3) stable isotope fractionation during redox reactions; and (4) nucleation and growth of nanoscale oxyhydroxides.

36 MATERIALS SCIENCE↗

Goethite Bench-scale and Large-scale Preparation Tests

The Hanford Waste Treatment and Immobilization Plant (WTP) is the keystone for cleanup of high-level radioactive waste from our nation's nuclear defense program. The WTP will process high-level waste from the Hanford tanks and produce immobilized high-level waste glass for disposal at a national repository, low activity waste (LAW) glass, and liquid effluent from the vitrification off-gas scrubbers. The liquid effluent will be stabilized into a secondary waste form (e.g. grout-like material) and disposed on the Hanford site in the Integrated Disposal Facility (IDF) along with the low-activity waste glass. The major long-term environmental impact at Hanford results from technetium that volatilizes from the WTP melters and finally resides in the secondary waste. Laboratory studies have indicated that pertechnetate ({sup 99}TcO{sub 4}{sup -}) can be reduced and captured into a solid solution of {alpha}-FeOOH, goethite (Um 2010). Goethite is a stable mineral and can significantly retard the release of technetium to the environment from the IDF. The laboratory studies were conducted using reaction times of many days, which is typical of environmental subsurface reactions that were the genesis of this new process. This study was the first step in considering adaptation of the slow laboratory steps to a larger-scale and faster process that could be conducted either within the WTP or within the effluent treatment facility (ETF). Two levels of scale-up tests were conducted (25x and 400x). The largest scale-up produced slurries of Fe-rich precipitates that contained rhenium as a nonradioactive surrogate for {sup 99}Tc. The slurries were used in melter tests at Vitreous State Laboratory (VSL) to determine whether captured rhenium was less volatile in the vitrification process than rhenium in an unmodified feed. A critical step in the technetium immobilization process is to chemically reduce Tc(VII) in the pertechnetate (TcO{sub 4}{sup -}) to Tc(Iv)by reaction with the ferrous ion, Fe{sup 2+}-Fe{sup 2+} is oxidized to Fe{sup 3+} - in the presence of goethite seed particles. Rhenium does not mimic that process; it is not a strong enough reducing agent to duplicate the TcO{sub 4}{sup -}/Fe{sup 2+} redox reactions. Laboratory tests conducted in parallel with these scaled tests identified modifications to the liquid chemistry necessary to reduce ReO{sub 4}{sup -} and capture rhenium in the solids at levels similar to those achieved by Um (2010) for inclusion of Tc into goethite. By implementing these changes, Re was incorporated into Fe-rich solids for testing at VSL. The changes also changed the phase of iron that was in the slurry product: rather than forming goethite ({alpha}-FeOOH), the process produced magnetite (Fe{sub 3}O{sub 4}). Magnetite was considered by Pacific Northwest National Laboratory (PNNL) and VSL to probably be a better product to improve Re retention in the melter because it decomposes at a higher temperature than goethite (1538 C vs. 136 C). The feasibility tests at VSL were conducted using Re-rich magnetite. The tests did not indicate an improved retention of Re in the glass during vitrification, but they did indicate an improved melting rate (+60%), which could have significant impact on HLW processing. It is still to be shown whether the Re is a solid solution in the magnetite as {sup 99}Tc was determined to be in goethite.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nanostructured Cobalt Oxide Clusters in Mesoporous Silica as Efficient Oxygen-Evolving Catalysts

The development of integrated artificial photosynthetic systems for the direct conversion of carbon dioxide and water to fuel depends on the availability of efficient and robust catalysts for the chemical transformations. Catalysts need to exhibit turnover frequency (TOF) and density (hence size) commensurate with the solar flux at ground level (1000Wm2, airmass (AM) 1.5)[1]to avoid wasting of incidentsolar photons. For example, a catalyst with a TOF of 100 s1 requires a density of one catalytic site per square nanometer. Catalysts with lower rates or taking up a larger space will require a high-surface-area, nanostructured support that affords tens to hundreds of catalytic sites per square nanometer. Furthermore, catalysts need to operate close to the thermodynamic potential of the redox reaction so that amaximum fraction of the solar photon energy is converted to chemical energy. Stability considerations favor all-inorganic oxide materials, as does avoidance of harsh reaction conditions of pH value or temperature.

10 SYNTHETIC FUELS↗

First stage of reaction of molten Al with MgO substrate

The Al/MgO couple was produced in vacuum (~ 5 × 10{sup −} {sup 4} Pa) by contact heating from RT up to 1000 °C and holding at that temperature for 1 h of a small 4 × 4 × 4 mm aluminium (5 N) sample placed on the [100] MgO single crystal substrate. TEM observations backed with electron diffraction analysis indicated that the interaction between liquid aluminium and MgO starts from a redox reaction producing a continuous layer of MgAl{sub 2}O{sub 4} spinel on the substrate surface. Its growth is controlled by solid state out-diffusion of magnesium and oxygen towards the surface being in contact with liquid metal. The thickening of spinel layer is accompanied by its cracking and infiltration with aluminium. The above process enables local dissolution of the MgO substrate and formation in it of a thin region of interpenetrating metallic channels walled with spinel. The removal of dissolved magnesium through open aluminium channels towards the drop and to vacuum locally produces areas of aluminium enriched with dissolved oxygen, which results in the nucleation of α-Al{sub 2}O{sub 3} at spinel clad walls. The growth of α-Al{sub 2}O{sub 3} is controlled only by the dissolution rate of MgO by aluminium, liquid state diffusion of Mg to drop/vacuum and oxygen to the front of the of α-Al{sub 2}O{sub 3} crystallites growing into MgO substrate. - Highlights: • New unique evidence of first stages of interaction of liquid Al with MgO substrates • Interaction of liquid Al with MgO starts with the formation of a layer MgAl{sub 2}O{sub 4}. • Growth of MgAl{sub 2}O{sub 4} is slow as controlled by solid state out-diffusion of Mg and O. • MgAl{sub 2}O{sub 4} serves as a nucleation site for Al{sub 2}O{sub 3} and consumed by it soon after. • Growth of Al{sub 2}O{sub 3} is fast as controlled by diffusion in liquid state.

36 MATERIALS SCIENCE↗

CeTi 2 O 6 —A Promising Oxide for Solar Thermochemical Hydrogen Production

A large entropy of reduction is crucial in achieving materials capable of high-efficiency solar thermochemical hydrogen (STCH) production through two-step thermochemical water splitting cycles. We have recently demonstrated that the onsite electronic entropy of reduction attains an extreme value of 4.26 kB at 1500 K in Ce 4+ → Ce 3+ redox reactions, which explains the high performance and uniqueness of CeO 2 as an archetypal STCH material. However, ceria requires high temperatures (T > 1500 °C) to achieve a reasonable reduction extent because of its large reduction enthalpy, which is a major obstacle in practical applications. Therefore, new materials with a large entropy of reduction and lower reduction enthalpy are required. Here, we perform a systematic screening to search for Ce 4+ -based oxides which possess thermodynamics superior to CeO 2 for STCH production. We first search the Inorganic Crystal Structure Database (ICSD) and literature for Ce 4+ -based oxides and subsequently use density functional theory to compute their reduction enthalpies (i.e., oxygen vacancy formation energies). Here, we find that CeTi 2 O 6 with the brannerite structure is the most promising candidate for STCH because it possesses three essential characteristics of an STCH material: (i) a smaller reduction enthalpy compared to ceria yet large enough to split water, (ii) a high thermal stability, as reported experimentally, and (iii) a large entropy of reduction associated with Ce 4+ → Ce 3+ redox. Our proposed design strategy suggests that further exploration of Ce 4+ oxides for STCH production is warranted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fe(CN){sub 6}{sup 3-}/Fe(CN){sub 6}{sup 4-} redox in the interlayer determined by the charge density of Zn{sub n}Cr-layered double hydroxides

Redox of Fe(CN){sub 6}{sup 3-} and Fe(CN){sub 6}{sup 4-} in the ZnCr layered double hydroxide interlayer has been investigated. The conversion from Fe(CN){sub 6}{sup 3-} to Fe(CN){sub 6}{sup 4-} or from Fe(CN){sub 6}{sup 4-} to Fe(CN){sub 6}{sup 3-} in the ZnCr-LDH interlayer has been confirmed, depending on the Zn:Cr molar ratio. Both Fe(CN){sub 6}{sup 3-} and Fe(CN){sub 6}{sup 4-} are observed in all samples no matter whether the initial anion is Fe(CN){sub 6}{sup 3-} or Fe(CN){sub 6}{sup 4-} before precipitation. Deconvolution of the FTIR band around 2100 cm{sup -1} reveals that the relative amount of Fe(CN){sub 6}{sup 4-} and Fe(CN){sub 6}{sup 3-} in the LDH interlayer is considerably dependent on the Zn:Cr molar ratio. In brief, Fe(CN){sub 6}{sup 4-} is preferred at the ratio of 2:1 while there is more Fe(CN){sub 6}{sup 3-} in the ratio of 4:1. Therefore, it is our hypothesis that the charge density of the hydroxide layer is a key factor that directs the redox of Fe(CN){sub 6}{sup 3-}/Fe(CN){sub 6}{sup 4-}. The possible redox processes have also been proposed. - Graphical abstract: Redox reactions of Fe(CN){sub 6}{sup 3-} and Fe(CN){sub 6}{sup 4-} take place in the ZnCr layered double hydroxide (LDH) interlayer, which are reflected by Fe(CN){sub 6}{sup 3-}/Fe(CN){sub 6}{sup 4-} FTIR area ratio. Highlights: Black-Right-Pointing-Pointer An interlayer redox phenomena was observed in Fe(CN){sub 6}{sup 3/4-} intercalated ZnCr-LDHs. Black-Right-Pointing-Pointer The ratio of interlayer redox was examined by FTIR fitting analysis. Black-Right-Pointing-Pointer The tendency of redox was influenced by Zn:Cr molar ratio. Black-Right-Pointing-Pointer The mechanism relies on the charge density of metal hydroxyl layer.

36 MATERIALS SCIENCE↗

Aqueous TiO 2 Nanoparticles React by Proton-Coupled Electron Transfer

Redox reactions of aqueous colloidal TiO 2 4 nm nanoparticles (NPs) have been examined, including both citratecapped and uncapped NPs (c-TiO 2 and uc-TiO 2 ). Photoreduction gave stable blue colloidal c-TiO 2 R NPs with 10–60 electrons per particle. Equilibration of these reduced NPs with soluble redox reagents such as methylviologen (MV 2+ ) provided measurements of the colloid reduction potential as a function of pH. The potentials of c-TiO 2 from pH 2–9 varied linearly with pH, with a slope of –60 ± 5 mV/pH. Estimates of the potential at pH 12 were consistent with extrapolating that line to high pH. The reduction potentials did not correlate with the zeta potentials (ζ) or the surface charge of the NPs across this pH range. Similar reduction potentials were observed for c- and uc-TiO 2 at low pH even though they have quite different ζ potentials. These results show that the common surface-charging explanation of the pH dependence is not tenable in these systems. Oxidation of reduced c-TiO 2 R with the electron-transfer oxidant potassium triiodide (KI 3 ) occurred with a significant drop in pH, showing that protons were released when the electrons were removed from the NPs. Smaller pH drops were observed for the proton-coupled electron transfer (PCET) reagents O 2 (air) and 4-MeO-TEMPO (4-methoxy-2,2,6,6-tetramethylpiperine-1-oxy radical). The difference in the number of protons released with KI 3 vs O 2 and 4-MeO-TEMPO was roughly one proton per electron removed. Thus, the thermodynamically preferred reactivity of these colloidal TiO 2 NPs is PCET over the pH 2–13 range studied. The measured redox potentials refer to the chemical process TiO 2 + H + + e – → TiO 2 ·e – ,H + ; and therefore they do not correspond with an electronic energy such as a conduction band edge or flat band potential. The 1e – /1H + stoichiometry means that the TiO 2 reduction potentials correspond to a TiO 2 –H bond dissociation free energy (BDFE), determined to be 49 ± 2 kcal mol –1 . The PCET description is consistent with the pH dependence of E(TiO 2 /TiO 2 ·e – ,H + ), the release of protons upon oxidation, the lack of correlation with ζ potentials, the similarity of capped and uncapped NPs, and the small change in the potential and BDFE from the first to the last electron/proton pair (H atom) removed. Furthermore, this behavior is suggested to be the norm for redox-active oxide/water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Radiation Chemistry of Radiochemical Separations: A Review

Radiochemistry deals with the chemistry of the radioactive elements, especially with regard to separations, while radiation chemistry is concerned with the chemical effects of ionizing radiation. The most common types of radiation encountered by the radiochemist are low linear energy transfer (LET) ß- and ? radiation, and higher LET a radiation. These radiations can have profound and important effects on radiochemistry, including changes in metal oxidation states and degradation of the organic ligands designed to complex radioelements. This may occur by direct action of the incident radiation on compounds present with high abundance or by reaction with radiolytically produced reactive species for trace components, such as the complexing agents used in separations. This review examines the role of reactive species created in irradiated aqueous and organic solution and their effects on radiochemistry. Examples are provided related to solvent extraction from acidic solution, metal complexation in alkaline tank waste, and the corrosion of spent fuel stored in repository brine. Radiolytic actinide and fission product metal redox reactions are also discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗