SEARCH · Engineering Papers

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Evaluation of a catalytic reduction technique for the measurement of total reactive odd-nitrogen NOy in the atmosphere

The suitability of a technique for the measurement of total reactive odd-nitrogen NOy-containing species in the atmosphere has been examined. In the technique, an NOy component species, which may include NO, NO2, NO3, HNO3, peroxyacetyl nitrate, and particulate nitrate, are catalytically reduced by CO to form NO molecules on the surface of a metal converter tube, and the NO product is detected by chemiluminescence produced in reaction with O3. Among the catalysts tested in the temperature range of 25-500 C, Au was the preferred catalyst. The results of laboratory tests investigating the effects of pressure, O3, and H2O on NOy conversion, and the possible sources of interference, have shown that the technique is suitable for atmospheric analyses. The results of a test in ambient air at a remote ground-based field site are included.

Fahey, D. W.↗

NASA NTRS1986

Low-temperature deposition of low resistivity ZnSe films by reactive sputtering

The use of reactive dc magnetron cosputtering of Zn and the dopant In in an H2Se/Ar gaseous mixture is described. It is observed that initial deposition using pure Zn targets produced yellowish transparent ZnSe films on glass with a film resistivity of 10 to the 8th ohms cm and deposition using a Zn target doped with a fixed 1 percent of In produced ZnSe films with resistivities of about 10,000 ohms cm. The improvement of film conductivity by optimizing the In content in the ZnSe films is discussed; the ZnSe resistivity dependence on In flux is studied. Optical absorption/transmission measurements reveal a photon energy band gap of 2.65 eV at room temperature and X-ray diffraction show highly oriented polycrystalline films on glass with the c axis parallel to the plane of the film. Compositional analysis was performed and the Zn/Se ratio is measure as 48.8/49.0 with an In concentration of 1.16 percent. ZnSe films deposited on glass and conducting SnO2-coated glass substrates with a resistance of 20 ohms cm and a substrate temperature of 120 C have been fabricated.

Stirn, R. J.↗

NASA NTRS1986

Highly conducting ZnSe films by reactive magnetron sputtering

This paper presents the results of an effort to deposit high-conductivity ZnSe on glass and conducting SnO2-coated glass substrates by reactive magnetron sputter deposition, using pure metal sputter targets of Zn and dopants such as In, Ga, and Al. Clear yellow ZnSe films were successfully obtained. By using substrate temperatures as low as 150 C, cosputtered dopants, and sputter parameters and H2Se injection rates which maximize the Zn-to-Se ratio in the films, ZnSe bulk resistivities have been lowered by up to seven orders of magnitude, reaching values as low as 20 ohm cm. The most effective dopant to data has been In, cosputtered with Zn in amounts leading to In atomic concentrations as high as 1.4 percent. Atomic-absorption measurements show an average 49.9/48.9 ratio of Zn to Se.

Nouhi, A.↗

NASA NTRS1987

Microwave surface resistance of reactively sputtered NbN thin films

The surface resistance of niobium nitride (NBN) thin films was measured at 7.78 and 10.14 GHz in the temperature range of 1.5 to 4.2 K. The films were reactively sputtered on sapphire substrates to a thickness of approximately 1 micron. The surface resistance was determined by measuring the quality factor (Q) of the TE sub 011 mode of a lead-plated copper cavity where the NbN served as one end-cap of the cavity.

Bautista, J. J.↗

NASA NTRS1986

Synthesis of diamino terminated poly(arylene ether sulfone) oligomers as reactive intermediates in copolymer systems

Reactive diamino terminated oligomers of pre-determined molecular weights can be prepared by either of two synthetic routes depending upon the compound used to introduce the amine functionality. After characterization by spectroscopic and thermal methods, these oligomers can be used in several post-reactions to yield novel block and segmented copolymer systems. A potential application for these poly(arylene ether sulfone) oligomers exists in the curing or co-curing of epoxy resins for improving toughness. They can also be used to prepare toughened bismaleimide systems as well as producing copolymers with improved solvent resistance, especially with respect to chlorinated solvents.

Jurek, M. J.↗

NASA NTRS1987

Preliminary results on CuInSe2/ZnSe solar cells using reactively sputter-deposited ZnSe

In this paper preliminary results on CuInSe2/ZnSe thin film heterojunction photovoltaic devices are presented. High-conductivity ZnSe films were reactively sutter-deposited onto CuInSe2 films and overcoated with ZnO to reduce the sheet resistance. The highest short-circuit current density, as determined from a spectral response weighted for air mass 1.5 global insolation, was 37.4 mA/sq cm. The highest pen-circuit voltage observed was 430 mV.

Nouhi, A.↗

NASA NTRS1986

Reactivity of seventeen- and nineteen-valence electron complexes in organometallic chemistry

A guideline to the reactivity of 17- and 19-valence electron species in organometallic chemistry is proposed which the authors believe will supersede all others. The thesis holds that the reactions of 17-electron metal radicals are associatively activated with reactions proceeding through a 19-valence electron species. The disparate reaction chemistry of the 17-electron metal radicals are unified in terms of this associative reaction pathway, and the intermediacy of 19-valence electron complexes in producing the observed products is discussed. It is suggested that related associatively activated pathways need to be considered in some reactions that are thought to occur by more conventional routes involving 16- and 18-electron intermediates. The basic reaction chemistry and electronic structures of these species are briefly discussed.

Stiegman, Albert E.↗

NASA NTRS1988

Dual-Band Microstrip Antenna With Reactive Loading

Effective but bulky coaxial stub replaced. Short-circuited microstrip transmission line serves as reactive loading element for microstrip antenna. Constructed integrally with stripline radiating element, shorted line preserves low microstrip profile and enables tuning of antenna for two-band operation.

Davidson, Shayla E.↗

NASA NTRS1988

Laser Micromachining In A Reactive Atmosphere

Drilling of deep holes in silicon by laser beam aided by conducting operation in reactive atmosphere. Atmosphere reacts with material ejected from hole and converts material to gas flowing away from work area. Hole cleaner and more sharply defined, and debris do not spatter surface of work.

Shlichta, Paul J.↗

NASA NTRS1986

Development and characterization of Histoplasma capsulatum-reactive murine T-cell lines and clones

Several Histoplasma capsulatum-reactive murine cloned T-cell lines (TCLs) were isolated from spleens of C57BL/6 mice immunized with viable H. capsulatum yeast cells, using the methodology of Kimoto and Fathman (1980). These T-cells were characterized phenotypically as Thy-1.2(+) Lyt-1(+) L3T4(+) Lyt-2(-), that is, as the helper/inducer phenotype. The cloned T cells proliferate in response to histoplasmin and, in some cases, to heterologous fungal anigens. Upon injection of mice with the antigen, the T-cells mediate local delayed-type hypersensitivity responses and, after stimulation, release regulatory lymphokines.

Deepe, George S., Jr.↗

NASA NTRS1988

Quantum mechanical calculations of vibrational population inversion in chemical reactions - Numerically exact L-squared-amplitude-density study of the H2Br reactive system

Numerically exact, fully three-dimensional quantum mechanicl reactive scattering calculations are reported for the H2Br system. Both the exchange (H + H-prime Br to H-prime + HBr) and abstraction (H + HBR to H2 + Br) reaction channels are included in the calculations. The present results are the first completely converged three-dimensional quantum calculations for a system involving a highly exoergic reaction channel (the abstraction process). It is found that the production of vibrationally hot H2 in the abstraction reaction, and hence the extent of population inversion in the products, is a sensitive function of initial HBr rotational state and collision energy.

Zhang, Y. C.↗

NASA NTRS1988

Deposition of vanadium oxide films by direct-current magnetron reactive sputtering

It is demonstrated here that thin films of vanadium oxide can be deposited at modest substrate temperatures by dc reactive sputtering from a vanadium target in an O2-Ar working gas using a planar magnetron source. Resistivity ratios of about 5000 are found between a semiconductor phase with a resistivity of about 5 Ohm cm and a metallic phase with a resistivity of about 0.001 Ohm cm for films deposited onto borosilicate glass substrates at about 400 C. X-ray diffraction shows the films to be single-phase VO2 with a monoclinic structure. The VO2 films are obtained for a narrow range of O2 injection rates which correspond to conditions where cathode poisoning is just starting to occur.

Kusano, E.↗

NASA NTRS1988

In-situ measurements of total reactive nitrogen, total water vapor, and aerosols in polar stratospheric clouds in the Antarctic stratosphere

Measurements of total reactive nitrogen, NOy, total water vapor, and aerosols were made as part of the Airborne Antarctic Ozone Experiment. The measurements were made using instruments located onboard the NASA ER-2 aircrafts which conducted twelve flights over the Antarctic continent reaching altitudes of 18 km at 72 S latitude. Each instrument utilized an ambient air sample and provided a measurement up to 1 Hz or every 200 m of flight path. The data presented focus on the flights of Aug. 17th and 18th during which Polar Stratospheric Clouds (PSCs) were encountered containing concentrations of 0.5 to 1.0 micron diameter aerosols greater than 1 cm/cu. The temperature pressure during these events ranged as low as 184 K near 75 mb pressure, with water values near 3.5 ppm by volume (ppmv). With the exception of two short periods, the PSC activity was observed at temperatures above the frost point of water over ice. The data gathered during these flights are analyzed and presented.

Fahey, D. W.↗

NASA NTRS1989

Reduced reactivity to air on HF-treated YBa2Cu3O(7-x)surfaces

Treatment of YBa2Cu3O(7-x) films with a nonaqueous solution of HF in absolute ethanol results in the formation of an oxyfluoride with relative Y:Ba:Cu concentrations of 1:4:3 on the surface, as determined by X-ray photoelectron spectroscopy. The passivation properties of chemically treated films were tested by monitoring the growth of the high binding energy O 1s peak, associated with nonsuperconducting surface species, as a function of air exposure time, for both HF-treated and untreated films. The native oxyfluoride is shown to reduce the reactivity of the superconductor to air.

Vasquez, R. P.↗

NASA NTRS1989

In situ measurements of total reactive nitrogen, total water, and aerosol in a Polar Stratospheric Cloud in the Antarctic

Fahey, D. W.↗

NASA NTRS1990

Preparation Of High-Temperature Reactive Oligomers

Very reactive materials form very-heat-stable polymers. Recent research directed toward synthesis of polyimides soluble in common organic solvents, melt-processable, and thermally curable without evolution of volatile by-products. Diels-Alder polymerization yields compounds that maintain integrities and toughnesses during long exposure times at high temperatures. High-temperature polymers synthesized by use of technique. Films and perhaps fibers fabricated from prepolymer in solution. Major potential at this stage of research limited to aerospace applications.

Ottenbrite, Raphael M.↗

NASA NTRS1989

Analysis of reactively loaded microstrip disk antenna

The moment method solution to the problem of a reactively loaded circular patch is presented. Using the reaction integral equation in conjuction with the method of moments, parameters of the Thevenin's equivalent network for the loaded patch are obtained. From the equivalent network parameters an expression for the imput impedance of the loaded patch is derived. A design procedure for a circularly polarized disk antenna is presented. Computed results are compared with the experimental data.

Deshpande, M. D.↗

NASA NTRS1989

Measurements of nitric oxide and total reactive nitrogen in the Antarctic stratosphere - Observations and chemical implications

Results are presented on measurements of NO and the sum of reactive nitrogen species, NO(y), which include NO, NO2, NO3, N2O5, HNO3, and ClONO2 (in addition to ClO, O3, H2O, and N2O measurements), obtained aboard the NASA ER-2 aircraft flying over the Antarctica between the latitudes of 53 and 72 deg S during the Airborne Antarctic Ozone Experiment. The boundary of the chemically perturbed region (CPR), as indicated by a sharp increase in the level of ClO, occurred near 66 deg S; outside or equatorward of the CPR, the NO(y) mixing ratios ranged between 6 and 12 ppbv, with values decreasing poleward and reaching total NO(y) levels of 4 ppbv or less within 5-deg poleward of the boundary. Data presented in this paper clearly associate the Antarctic ozone decrease with perturbed conditions of ClO, NO(y), and H2O, which are in turn associated with processes defined as nonstandard heterogeneous chemistry, denitrification, and dehydration, respectively.

Fahey, D. W.↗