Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIOCHEMISTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Separation of gold from irradiated actinide material utilizing a 2- thenoyltrifluoroacetone extraction resin

Post-detonation nuclear forensics capabilities depend on the ability to rapidly isolate radionuclides to improve measurement quality. In this work an extraction chromatography resin was developed utilizing the extractants thenoyltrifluoroacetone and 1-octanol supported on Eichrom prefilter resin. Here the resin was tested in nitric and hydrochloric acid matrices. In nitric acid matrices the resin is able to extract zirconium, while in hydrochloric acid matrices it is possible to extract iron and gallium. In all acid conditions tested gold is retained but can be removed from the column with a 10% thiourea rinse.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Adsorption of terbium (III) on DGA and LN resins: Thermodynamics, isotherms, and kinetics

Two commercially available extraction chromatography (EXC) resins containing N,N,N’,N’-tetra-n-octyldiglycolamide (DGA Resin, Normal, 50 – 100 μm) and Bis(2-ethylhexyl) phosphate (LN Resin, 100 – 150 μm) were used as adsorbents to study fundamental adsorption properties such as thermodynamic values, equilibrium isotherms, and kinetic uptake models for terbium(III) adsorption. Weight distribution ratios (D w ) for terbium on DGA and LN resins were measured using a [ 160 Tb]Tb 3+ radiometric tracer in nitric acid as a function of acidity, temperature, initial analyte concentration, and equilibrium time. The D w values showed increasing binding affinity for DGA resin at high nitric acid concentrations and decreasing binding affinity for LN resins. Thermodynamic studies for DGA and LN resins revealed that the Gibbs free energy (ΔG) increased consistently with temperature. To model equilibrium data, increasingly higher parameter equilibrium isotherm models (Henry (1) < Langmuir, Freundlich (2) < Redlich-Peterson (3) < Fritz-Schluender (4)) were compared on their root mean squared errors (RMSE) and adjusted determination coefficients to determine the most applicable model. In all cases, the empirical four-parameter Fritz-Schluender isotherm demonstrated a superior fit. Similar comparisons for reaction-based kinetic models (Pseudo-first-order < Pseudo-second-order < Pseudo-n-order) revealed that the higher-order PNO model yielded a superior fit of kinetic data for both resins. Furthermore, in some cases, adsorption isotherms and kinetic models could also be modeled by a lower-order model with minimal change in error parameters. Weber-Morris plots revealed that two linear sections are observed for each resin, where the first linear segment is attributed to fast (film diffusion) adsorption of terbium, followed by slower intraparticle diffusion of terbium through the pores as the rate-limiting step. Based on the Weber-Morris plot, both film and intraparticle diffusion are involved in controlling the kinetic rate of adsorption for DGA and LN resins.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Group hexavalent actinide separation from lanthanides using sodium bismuthate chromatography

Advanced used nuclear fuel (UNF) reprocessing strategies are limited by the complex radiochemical separations and engineering required to achieve the separation of actinides (An) from neutron scavenging lanthanides (Ln). The accessibility of the hexavalent oxidation state for the actinides (U – Am) provides a pathway to achieving a group hexavalent actinide separation from the trivalent lanthanides and Cm. The solid oxidant and ion exchanger, sodium bismuthate (NaBiO 3 ), has been demonstrated to quantitatively oxidize and separate Am from trivalent Cm in a column chromatographic system. This work expands on the use of NaBiO 3 chromatography to characterize the adsorption, kinetic, and elution behavior of U, Pu, and Eu. Separation factors over 200 with rapid kinetics were observed at dilute nitric acid concentrations with a complete An/Ln separation achieved in under an hour. In conclusion, the adsorption and chromatographic behavior of key fission products present in various reprocessing raffinates was characterized which demonstrated potential application of a NaBiO 3 -based separation following a TRUEX process.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Demonstration of a 228 Ra/ 228 Ac isotope generator

An isotope generator to produce 228 Ac from 228 Ra was developed using a cation exchange resin column eluted with an acetate-diethylenetriaminpentaacetic acid buffer. Here, the elution behavior of 228 Ac on the column was studied with solutions of various pHs to select the optimal conditions. Two identical isotope generators were eluted for 47 days with over 100 mL of eluant with no detectable 228 Ra breakthrough and high 228 Ac yields (∼95%). The separation requires only biocompatible reagents and is performed at pH 4.6, conditions suitable for radiopharmaceutical studies of Ac.

and nuclear chemistry↗
DOE OSTI2026

Isotope harvesting from a NSCL beam blocker: Isolation of 173,174 lu

A decommissioned beam blocker from the National Superconducting Cyclotron Laboratory was processed for recovery of long-lived Lu radioisotopes at Lawrence Livermore National Laboratory. The beam blocker was a W alloy that had built up considerable levels of activation from high energy particle irradiation over the course of 20 years. The isolation of 173,174 Lu from the bulk material required a complex chemical separation scheme due to the large mass and the wide variety of elements present. The final yield of 173,174 Lu was 76.7 ± 4.8% with an extremely high radiopurity and chemical purity. The reduction in W mass from the initial material to the final sample was 8 × 10 10 . In conclusion, the results show great promise for extracting large quantities of Lu radioisotopes from these types of W beam blockers at the Facility for Rare Isotope Beams, which will be irradiated at levels significantly higher than the beam blocker investigated here.

and nuclear chemistry↗
DOE OSTI2026

Separation of radium and actinium in acetic acid/acetate solutions using TK101 resin

Here, the uptake and elution behavior of Ra and Ac was studied on TK101 resin using acetic acid and acetate buffer (acetic acid/lithium acetate) solutions. There is high extraction of Ra (>10 3 ) over a wide range of acetic acid concentrations (0.02 to 4 M) with slightly lower extraction (>10 2 ) in the acetate buffer solutions (pH 3.9 to 5.6). The Ac extraction is considerably lower with a maximum D w of ∼100, and negligible extraction at high acetic acid concentrations (> 1 M) and in the acetate buffer solutions. The difference in D w can be leveraged for highly efficient separations of Ac from Ra, with no detectable Ra in the Ac fractions and high Ac yields (∼100%). These separations may be useful for radiopharmaceutical applications as the Ac purity is extremely high and the elution conditions can be optimized to be biologically safe and appropriate for chelation to molecules relevant to targeted alpha therapy.

and nuclear chemistry↗
DOE OSTI2023

High-gradient magnetic separation of colloidal uranium oxide particles from soil components in aqueous suspensions

The separation of uranium oxide (UO 2 ) particles from soil-surrogate particles in aqueous suspensions was achieved using filtration enhanced by a magnetic field. Enhanced attraction of paramagnetic UO 2 colloids to a ferromagnetic stainless-steel filter placed in a strong magnetic field arises because of the positive magnetic susceptibility of the particles and the high-gradient field generated near ferromagnetic fibers. Enhanced uptake of smaller particles over larger ones occurs through Brownian motion that promotes the collision of particles with the ferromagnetic fibers of the filter. Hence, this work focused on UO 2 particles in the colloidal size range. Experiments used a water-cooled electromagnet and an array of permanent magnets. Chemical analysis showed that the magnetic field increased the capture efficiency of uranium particles from a range of 27–53% with the magnet off up to 98% with the magnet on after a single pass of the suspension through the filter. Further, the recovery of the UO 2 particles from the filter, however, was more difficult to achieve. Small amounts of UO 2 , together with significant amounts of background SiO 2 particles, were removed from the filter during a first flush with the magnetic field on. A much larger recovery of UO 2 was not observed until a second out-of-field flush was performed, which also released some SiO 2 . The degree to which particle separation was enhanced through the use of multi-stage filtration compared to single pass-through filtration was also examined. A design was suggested that could be used to optimize the separation efficiency for a continuous process.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Theoretical estimates of flammability bounds for thin condensed fuel diffusion flames in microgravity using detailed models of chemistry and radiation

Recently, U-shape flammability maps have been constructed showing minimal oxygen vs. flame strain for opposed flame spread in micro-gravity by Olson and Ferkul. The U-shape defines the limiting flammability bounds from radiative extinction and flame blow-off. Here, the minimum of the U corresponds to the minimum possible oxidizer concentration where burning can occur, and is an important quantity of interest for fire safety. While high strain extinction bounds have been well analyzed, low strain radiative extinction has not. To estimate low strain extinction, in this study an analytical theory is developed based on thin flame theory coupled with a heat and mass transfer model for solid fuels. A reaction progress variable based on the Damköhler number is adapted in the theory to account for incomplete combustion at high strain rates and enable the capturing of the full flammability map. The analytical model is compared to a one dimensional numerical model w/ detailed chemical kinetics and coupled radiation heat transfer in planar and spherical geometries. The flammability maps are then qualitatively compared to experimental extinguishment data compiled by Olson and Ferkul for cylindrical rods of PMMA showing similar trends. The results show the newly developed analytics capture the radiative extinction bound compared to the numerical model and qualitatively agrees with microgravity data.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Chromium isotope fractionation during reduction of Chromium(VI) by Iron(II/III)-bearing clay minerals

Chromium stable isotope ratios are used to trace the reduction of Cr(VI) to Cr(III) in both ancient and modern systems. However, quantitative interpretation of Cr isotopic signatures has been stymied by the large variability in isotopic fractionation factors for Cr(VI) reduction by different reductants. Here we determine Cr isotope fractionation factors during Cr(VI) reduction by Fe(II/III)-bearing clay minerals, which are abundant in subsurface environments. Several variables were tested: pH, total Fe content of the clay, and the fraction of reduced Fe within the clay (Fe(II)/Fe(total)). The latter controls the standard reduction potential of the clay. Our results demonstrate that neither pH nor total Fe content of the clay have major effects on isotopic fractionation. In contrast, as the effective standard reduction potential of the clay and thus the standard free energy of Cr(VI) reduction become more negative, Cr isotope fractionation factors decrease in magnitude from - 4.9 to -1.3‰ according to a linear free energy relationship. This linear free energy relationship can be predicted from Marcus electron transfer theory and allows first-order predictions of Cr isotope fractionation factors to be made from the standard reduction potential or Fe(II)/Fe(total) of a clay, potentially improving our ability to model Cr isotope signatures in geochemical systems. Chromium is the first isotope system to show such a linear free energy relationship over a diverse range of reductants, including both aqueous and solid-phase reductants, and may provide a model for determining other redox-driven kinetic isotope effects in environmentally important isotope systems.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Activity model for 36 elements in Fe-Ni-Si-S-C liquids with application to terrestrial planet accretion and mantle geochemistry: New data for Ru, Re, Pt, Os, Ti, Nb, and Ta

Understanding siderophile element partitioning between metal and silicate melts under diverse conditions can be used to place important constraints on the materials and conditions of planetary accretion and core formation, as well as post core formation processes. However, the effects of Si on the partitioning and activity coefficients for these elements are not well known, despite Si likely being one of the dominant light elements in Earth’s core. To address this gap in understanding, we have undertaken a systematic study of the highly siderophile elements Re, Pt, Os, and Ru, and the refractory lithophile elements Nb, Ta and Ti at 1600 °C and 1 GPa, to derive epsilon interaction parameters for these elements in FeSi metallic liquids. Positive epsilon interaction parameters were measured for Nb, Ta, Ti, Ru, Re, Pt, and Os, indicating that dissolved Si in Fe liquids causes a decrease in their metal/silicate partition coefficients (or ‘silicophobic’ behavior). Furthermore, ε$_{Re, Os, or Ru}^{Si}$ > ε$_{Re, Os, or Ru}^{S}$ which means Si causes a larger decrease in D(metal/silicate) than S, and the chalcophile behavior expected from some elements will be completely masked by the presence of Si in a metallic liquid. The new parameters are used to update an activity model that now includes 36 siderophile elements in Fe-Ni-Si-S-C liquids (27 trace elements considered here). Systematic assessment of these 27 elements shows which have the strongest affinity for Si, C, and S, and also how activity coefficients for these elements would vary during accretion and core formation in Earth, Mars, and Mercury of widely differing fO 2 and core compositional conditions. The activity model is combined with new partitioning expressions for Mo, W, Cr, Re Ru, Pt, and Os and applied to aspects of post core formation mantle geochemistry of Earth, Mars, and Mercury. Our updated expressions show that the BSE Mo/W ratio can easily be achieved with metal/silicate partitioning during growth of the Earth, whereas Re, Os and Ru become lower than and highly fractionated compared with BSE values during core formation and accretion, and thus nearly 99% of their BSE abundances are likely contributed by late accretion. Ru isotopes should be a very good indicator of the source material for the late accretion. The high Pt/Os and Re/Os developed in a deepening magma ocean during the growth of the Earth, indicates 186 Os and 187 Os isotopes could be coupled if this ancient material remained isolated and subsequently became entrained in mantle plumes and measured in surficial lavas. The extent to which this occurred will be limited by the low Os content of this ancient material, thus requiring mixing as a major component in plume sources. Martian mantle Hf/W ratio stays low during accretion and core formation modelling, suggesting that W isotope anomalies are more likely due to solid/liquid silicate fractionation than to core formation. Finally, Ti contents measured by MESSENGER at Mercury’s surface can be explained by segregation of either a metallic core (IW-6 to -8) or metallic core + sulfide (IW-4 to -7.5) followed by mantle melting.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Multicellular Spheroids as In Vitro Models of Oxygen Depletion During FLASH Irradiation

The differential response of normal and tumor tissues to ultrahigh-dose-rate radiation (FLASH) has raised new hope for treating solid tumors but, to date, the mechanism remains elusive. One leading hypothesis is that FLASH radiochemically depletes oxygen from irradiated tissues faster than it is replenished through diffusion. The purpose of this study was to investigate these effects within hypoxic multicellular tumor spheroids through simulations and experiments.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Quantification of Oxygen Depletion During FLASH Irradiation In Vitro and In Vivo

Delivery of radiation at ultrahigh dose rates (UHDRs), known as FLASH, has recently been shown to preferentially spare normal tissues from radiation damage compared with tumor tissues. However, the underlying mechanism of this phenomenon remains unknown, with one of the most widely considered hypotheses being that the effect is related to substantial oxygen depletion upon FLASH, thereby altering the radiochemical damage during irradiation, leading to different radiation responses of normal and tumor cells. Testing of this hypothesis would be advanced by direct measurement of tissue oxygen in vivo during and after FLASH irradiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

The influence of cooling rate on condensation of iron, aluminum, and uranium oxide nanoparticles

Fundamental observations of particle size distributions are needed to develop models that predict the fate and transport of radioactive materials in the atmosphere following a nuclear incident. The extent of material transport is influenced by the time scales of particle formation processes (e.g., condensation, coagulation). In this study, we investigated the influence of cooling time scales on size distributions of uranium, aluminum, and iron oxide particles that are synthesized separately under identical run conditions inside the controlled environment of an argon plasma flow reactor. Two distinct temperature distributions are imposed along the flow reactor by varying the argon flow rate downstream of the plasma torch. The vaporized reactants of uranium, aluminum, and iron are cooled from about 5000K to 1000K before they are collected on silicon wafers for ex situ scanning electron microscope analysis. The microscope images show that the sizes of the largest aluminum and iron oxide particles heavily depend on the cooling time scales, whereas significant size variation with cooling rate is not observed for uranium oxide particles. In addition, the size distribution of aluminum oxide particles exhibits the broadest range among all three metal oxides studied. We performed simulations of particle size distributions using a kinetic model that couples gas phase oxidation chemistry with particle formation processes, including nucleation, condensation, and coagulation. The model results demonstrate the strong sensitivity of particle size distribution to different cooling histories (i.e., temperature vs residence time) along the flow reactor. In conclusion, the kinetic model also helps identify directions for future research to improve the predictions.

36 MATERIALS SCIENCE↗