SEARCH · Engineering Papers

Results for “Quasi-static”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Evaluation of an adaptive unstructured remeshing technique for integrated fluid-thermal-structural analysis

An adaptive unstructured remeshing technique is evaluated for integrated fluid-thermal-structural analysis. The technique is combined with the finite element method to solve: (1) the Navier-Stokes equations for high-speed compressible flow; (2) the energy equation for the structural-thermal response; and (3) the quasi-static equilibrium equations for the structural response. The remeshing technique and the analysis solution procedure are described. The effectiveness of the approach is evaluated with two application studies. The flow analysis of Mach 8 shock-shock interference on a three-inch-diameter cylinder is used as the first application study to demonstrate the capability of the remeshing technique and to examine proper remeshing indicators for the inviscid and boundary layer regions. The applicability of the approach for the thermal and structural analyses of the structure is evaluated in the second application study of a 0.25-inch-diameter convectively cooled leading edge subjected to intense aerodynamic heating. Issues associated with remeshing indicators for thermal stress problems are identified.

Dechaumphai, Pramote↗

NASA NTRS1989

Force-free magnetic fields - Is there a 'loss of equilibrium'?

This paper examines concept in solar physics that is known as loss of equilibrium in which a sequence of force-free magnetic fields, said to represent a possible quasi-static evolution of solar magnetic fields, reaches a critical configuration beyond which no acceptable solution of the prescribed form exists. This concept is used to explain eruptive phenomena ranging from solar flares to coronal mass ejections. Certain sequences of force-free configurations are discussed that exhibit a loss of equilibrium, and it is argued that the concept is devoid of physical significance since each sequence is defined a way that does not represent an acceptable thought experiment. For example, the sequence may be defined in terms of a global constraint on the boundary conditions, or the evolution of the sequence may require the creation of mgnetic flux that is not connected to the photosphere and is not present in the original configuration. The global constraints typically occur in using the so-called generating function method. An acceptance thought experiment is proposed to specify the field configuration in terms of photospheric boundary conditions comprising the normal component of the field and the field-line connectivity. Consider a magnetic-field sequence that, when described in terms of a generating function, exhibits a loss of equilibrium and show that, when one instead defines the sequence in terms of the corresponding boundary conditions, the sequence is well behaved.

Klimchuk, J. A.↗

NASA NTRS1989

Coupled fluid-thermal-structural analysis for aerodynamically heated structures

A finite element approach for integrated fluid-thermal-structural analysis of aerodynamically heated structures is described. The approach is used to solve: (1) the Navier-Stokes equations for the aerodynamic flow, (2) the energy equation of the structure for the temperature response, and (3) the quasi-static equilibrium equations of the structure for the structural response. Coupling between the three disciplines is demonstrated using two applications: Mach 7 flow over a panel and Mach 8 shock-shock interference on a cylinder.

Dechaumphai, Pramote↗

NASA NTRS1990

Evaluation of an adaptive unstructured remeshing technique for integrated fluid-thermal-structural analysis

An adaptive unstructured remeshing technique is evaluated for integrated fluid-thermal-structural analysis. The technique is combined with the finite element method to solve: (1) the Navier-Stokes equations for high-speed compressible flow, (2) the energy equation for the structural-thermal response, and (3) the quasi-static equilibrium equations for the structural response. The remeshing technique and the analysis solution procedure are described. The effectiveness of the approach is evaluated with two applications studies. The flow analysis of Mach 8 shock-shock interference on a three-inch-diameter cylinder is used as the first application study to demonstrate the capability of the remeshing technique and to examine proper remeshing indicators for the inviscid and boundary layer regions. The applicability of the approach for the thermal and structural analyses of the structure is evaluated in the second application study of a 0.25-inch-diameter convectively cooled leading edge subjected to intense aerodynamic heating. Issues associated with remeshing indicators for thermal stress problems are identified.

Dechaumphai, Pramote↗

NASA NTRS1990

On collisional disruption - Experimental results and scaling laws

Both homogeneous and inhomogeneous targets have been addressed by the present experimental consideration of the impact strengths, fragment sizes, and fragment velocities generated by cement mortar targets whose crushing strengths vary by an order of magnitude, upon impact of projectiles in the velocity range of 50-5700 m/sec. When combined with additional published data, dynamic impact strength is found to correlate with quasi-static material strengths for materials ranging in character from basalt to ice; two materials not following this trend, however, are weak mortar and clay targets. Values consistent with experimental results are obtainable with a simple scaling algorithm based on impact energy, material properties, and collisional strain rate.

Davis, Donald R.↗

NASA NTRS1989

Precision Segmented Reflector figure control system architecture

A control system architecture for an actively controlled segmented reflector is described along with a design realization for achieving precision alignment of reflector panels. Performance requirements are derived in part from the Large Deployable Reflector, which is a representative mission, and error allocations are made which consider mirror panel surface errors, position measurement and figure estimation, and position control of both quasi-static and dynamic disturbances. The design uses multiple wavelength interferometric edge sensors and voice coil actuators in conjunction with a hybrid control strategy to correct panel position errors. A unit cell shown to be central to the concept is analyzed. The cell integrates the sensing, actuation, and mechanical functions of a control module together with a reflector panel to form a unitized assembly.

Mettler, E.↗

NASA NTRS1990

Model-free distributed learning

Model-free learning for synchronous and asynchronous quasi-static networks is presented. The network weights are continuously perturbed, while the time-varying performance index is measured and correlated with the perturbation signals; the correlation output determines the changes in the weights. The perturbation may be either via noise sources or orthogonal signals. The invariance to detailed network structure mitigates large variability between supposedly identical networks as well as implementation defects. This local, regular, and completely distributed mechanism requires no central control and involves only a few global signals. Thus it allows for integrated on-chip learning in large analog and optical networks.

Dembo, Amir↗

NASA NTRS1990

The distortion of the magnetotail equilibrium structure by a net cross-tail magnetic field

Explicit solutions are presented for quiet, quasi-static magnetotail configurations in the presence of a net cross-tail magnetic field component in addition to field components associated with tail flaring. The solutions are derived using the general three-dimensional equilibrium theory of Birn (1987). It is found that the net By(N) field varies only weakly along field lines and across the tail. The presence of the net By(N) in the neutral sheet implies that a part of the cross-tail current becomes field-aligned, flowing from the southern to the northern hemisphere for By(N) larger than zero and from north to south for By(n) less than zero. The deformations of magnetic flux surfaces suggest that there may be a class of field lines extending from the earth into the magnetosheath region through the low-latitude flanks of the tail. A topological connection is found of the low-latitude region near the magnetopause with the plasma sheet boundary layer, separating closed plasma sheet and open lobe field lines.

Birn, J.↗

NASA NTRS1990

Residual strength of composite laminates subjected to tensile-compressive fatigue loading

Results are presented on the measurements of the residual strengths of T300/934 graphite epoxy laminates, in tension and in compression, after the samples were exposed to tension-compression fatigue loading (R = -1). Four laminate ocnfigurations were tested: unidirectional, cross-ply, angle-ply, and quasi-isotropic. It was found that the fatigue behavior of laminates was dependent on the quasi-static strengths and the specific structure of the laminate. No direct correlation was found between remaining residual strengths and the percentage of average fatigue life. However, a correlation scheme was developed for the individual specimen under test, based on a cumulative damage model and a stiffness change of the material.

Rotem, Assa↗

NASA NTRS1990

Dynamical evolution of twisted magnetic flux tubes. I - Equilibrium and linear stability

The three-dimensional dynamical evolution of twisted magnetic flux tubes is studied using a time-dependent magnetohydrodynamic (MHD) model. The flux tubes are intended to model solar coronal loops, and include the stabilizing effect of photospheric line tying. The model permits the complete evolution of flux tubes to be followed self-consistently, including the formation, equilibrium, linear instability, and nonlinear behavior. Starting from an initial uniform background magnetic field, a twisted flux tube is created by the application of slow, localized photospheric vortex flows. The flux tube evolves quasi-statically through sequences of equilibria with increasing twist, until it becomes linearly unstable to an ideal MHD kink mode. In this paper, the equilibrium properties and the linear stability behavior are discussed. The application of the method to the uniform-twist, Gold-Hoyle field confirms the previous stability threshold for kink instability and provides estimates of the resulting growth rate.

Mikic, Zoran↗

NASA NTRS1990

The magnetosphere of Neptune - Its response to daily rotation

The Neptunian magnetosphere periodically changes every eight hours between a pole-on magnetosphere with only one polar cusp and an earth-type magnetosphere with two polar cusps. In the pole-on configuration, the tail current sheet has an almost circular shape with plasma currents closing entirely within the magnetosphere. Eight hours later the tail current sheet assumes an almost flat shape with plasma currents touching the magnetotail boundary and closing over the tail magnetopause. Magnetic field and tail current sheet configurations have been calculated in a three-dimensional model, but the plasma- and thermodynamic conditions were investigated in a simplified two-dimensional MHD equilibrium magnetosphere. It was found that the free energy in the tail region of the two-dimensional model becomes independent of the dipole tilt angle. It is conjectured that the Neptunian magnetotail might assume quasi-static equilibrium states that make the free energy of the system independent of its daily rotation.

Voigt, Gerd-Hannes↗

NASA NTRS1991

A charging study of ACTS using NASCAP

The NASA Charging Analyzer Program (NASCAP) computer code is a three dimensional finite element charging code designed to analyze spacecraft charging in the magnetosphere. Because of the characteristics of this problem, NASCAP can use an quasi-static approach to provide a spacecraft designer with an understanding of how a specific spacecraft will interact with a geomagnetic substorm. The results of the simulation can help designers evaluate the probability and location of arc discharges of charged surfaces on the spacecraft. A charging study of NASA's Advanced Communication Technology Satellite (ACTS) using NASCAP is reported. The results show that the ACTS metalized multilayer insulating blanket design should provide good electrostatic discharge control.

Herr, Joel L.↗

NASA NTRS1991

Studies of magnetopause structure

From the International Sun-Earth Explorers (ISEE) 1 magnetopause crossings on November 10, 1977, three-dimensional distribution functions for energetic ions were studied in the magnetosphere, through the magnetopause, and in the magnetosheath (Speiser and Williams, 1982). The particle distributions were particularly examined at and near the times that Russell and Elphic (1978) identified as flux transfer events (FTE). Using a simple, one-dimensional, quasi-static model, particle orbits were followed numerically, from the magnetosphere into the sheath. The inner, trapped, distribution initializes the distribution function. Liouville's theorem allows the inner distribution to be mapped into the sheath following the orbits. This mapping is shown for four mangetosheath ion flows (MIF's) corresponding to four flux transfer events. Results from the studies are discussed. A brief discussion of current sheet particle motion is presented.

Speiser, Theodore W.↗

NASA NTRS1990

A survey of upwelling ion event characteristics

Quasi-static electric field data collected by the DE-1 spacecraft were used to study ionospheric ion upwelling events observed in the vicinity of the dayside cleft. Bulk plasma parameters such as ion-species density and field-aligned bulk velocity and flux were derived at points within several upwelling ion events for the H(+), He(+), O(+), and O(2+), and the ion-species bulk parameters near the source altitude were compared. It was found that O(+) ions comprise about 90 percent of the upwelling particle density, followed by H(+) at less than 10 percent; He(+) and O(2+) contribute about 1 percent each. The upwelling O(+) flux is also dominant, followed by upward H(+) flux, which is relatively more significant than the fractional H(+) density, due to its high upward flow velocity.

Pollock, C. J.↗

NASA NTRS1990

The evolution of coronal magnetic fields

Slow photospheric motions can produce flow speeds in the corona which are fast enough to violate quasi-static evolution. Therefore, high-speed flows observed in the corona are not necessarily due to a loss of equilibrium or stability. This paper presents an example where the flow speed increases indefinitely with height while the coronal magnetic energy increases quadratically with time.

Priest, E. R.↗

NASA NTRS1990

Integrated fluid-thermal-structural analysis using adaptive unstructured meshes

An integrated fluid-thermal-structural analysis approach using adaptive unstructured meshes is presented. The approach combines the finite-element method and an adaptive remeshing technique to solve the Navier-tokes equations for high-speed compressible flow, the energy equation for the thermal response of the structure, and the quasi-static equilibrium equations for the structural response. The analysis solution procedure and the adaptive unstructured remeshing technique are described. The effectiveness of the approach is evaluated with three application studies. The adaptive unstructured remeshing procedure and finite-element solution algorithms combine to yield increased accuracy and effiency over standard structured meshes.

Dechaumphai, Pramote↗

NASA NTRS1991

Dynamic tensile-failure-induced velocity deficits in rock

Planar impact experiments were employed to induce dynamic tensile failure in Bedford limestone. Rock disks were impacted with aluminum and polymethyl methacralate (PMMA) flyer plates at velocities of 10 to 25 m/s. Tensile stress magnitudes and duration were chosen so as to induce a range of microcrack growth insufficient to cause complete spalling of the samples. Ultrasonic P- and S-wave velocities of recovered targets were compared to the velocities prior to impact. Velocity reduction, and by inference microcrack production, occurred in samples subjected to stresses above 35 MPa in the 1.3 microsec PMMA experiments and 60 MPa in the 0.5 microsec aluminum experiments. Using a simple model for the time-dependent stress-intensity factor at the tips of existing flaws, apparent fracture toughnesses of 2.4 and 2.5 MPa sq rt m are computed for the 1.3 and 0.5 microsec experiments. These are a factor of about 2 to 3 greater than quasi-static values. The greater dynamic fracture toughness observed may result from microcrack interaction during tensile failure. Data for water-saturated and dry targets are indistinguishable.

Rubin, Allan M.↗

NASA NTRS1991

Elastic/viscoplastic constitutive model for fiber reinforced thermoplastic composites

A constitutive model to describe the elastic/viscoplastic behavior of fiber-reinforced thermoplastic composites under plane stress conditions is presented. Formulations are given for quasi-static plasticity and time-dependent viscoplasticity. Experimental procedures required to generate the necessary material constants are explained, and the experimental data is compared to the predicted behavior.

Gates, T. S.↗