SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
As Northstar enters a stage of rapid progress in the construction and implementation of their accelerator based Mo99 production facility, LANL has been supporting the effort as requested. This support is often an assistance response to issues as they arise. This report will describe these issues and the LANL contribution in analysis, advice and experimentation.
The global demand for low-emission hydrogen production is increasing rapidly due to the potential for hydrogen to substitute conventional fossil fuels in energy-related applications. Among practical technologies such as steam reforming of methane (SMR), water electrolysis, and methane pyrolysis, methane pyrolysis has the most potential to produce economical- and near-zero-emission hydrogen. The reaction during methane pyrolysis produces a solid carbon by-product that can be monetized to offset production costs. However, this route is not without research challenges, and the selective formation of high-value carbon remains a critical issue. Supported nickel, iron, and cobalt, have been widely investigated for methane pyrolysis. Although iron-based catalysts are less active than Ni, iron catalysts offer less resistance to coke formation, are inexpensive, and have a longer lifetime. One area not sufficiently explored is the effect of support materials other than Al2O3 for the iron-based catalysts. Therefore, we investigated a detailed variation of support materials to study their influence on the catalytic performance. Moreover, this study offers a fair and direct comparison among all catalytic materials which were synthesized and studied under identical conditions. This direct comparison of the obtained results is important because results reported in different publications are often not comparable due to very different reaction conditions.
The global demand for low-emission hydrogen production is increasing rapidly due to the potential for hydrogen to substitute conventional fossil fuels in energy related applications. Among all the current practical technologies – Steam Reforming of Methane (SMR), Water Electrolysis, and Methane Pyrolysis – methane pyrolysis has the potential to produce economical- and near-zero-emission hydrogen because the reaction produces a solid carbon by-product that can be monetized to offset production costs. However, this route is not without research challenges, and the selective formation of high-value carbon remains a critical issue. Supported nickel, iron, and cobalt, have been widely investigated for methane pyrolysis. Although iron-based catalysts are less active than Ni, iron catalysts offer less resistance to coke formation, are inexpensive, and have a longer lifetime. One area not sufficiently explored is the effect of support materials other than Al2O3 for the iron-based catalysts. Therefore, in this study we investigated a detailed variation of support material to study their influence on the catalytic performance. Moreover, this study offers a fair comparison because all catalytic materials were synthesized and studied under identical conditions, allowing a direct comparison of the obtained results; this is important because results reported in different publications in literature are often not comparable, due to very different reaction conditions.
Amorphous alumina overcoats generated by atomic layer deposition (ALD) have been shown to improve the selectivity and durability of supported metal catalysts in many reactions. Several mechanisms have been proposed to explain the enhanced catalytic performance, but the accessibilities of reactants through the amorphous overcoats remain elusive, which is crucial for understanding reaction mechanisms. Here, we show that an AlO x ALD overcoat is able to improve the alkene product selectivity of a supported Pd catalyst in acetylene (C 2 H 2 ) hydrogenation. We further demonstrate that the AlO x ALD overcoat blocks the access of C 2 H 2 (kinetic diameter of 0.33 nm), O 2 (0.35 nm), and CO (0.38 nm) but allows H 2 (0.29 nm) to access Pd surfaces. A H–D exchange experiment suggests that H 2 might dissociate heterolytically at the Pd–AlO x interface. These findings are in favor of a hydrogen spillover mechanism.
Additive manufacturing has established itself to be advantageous beyond small-scale prototyping, now supporting full-scale production of components for a variety of applications. Despite its integration across industries, marine renewable energy technology is one largely untapped application with potential to bolster clean energy production on the global scale. Wave energy converters (WEC) are one specific facet within this realm that could benefit from AM. As such, wire arc additive manufacturing (WAAM) has been identified as a practical method to produce larger scale marine energy components by leveraging cost-effective and readily available A36 steel feedstock material. The flexibility associated with WAAM can benefit production of WEC by producing more complex structural geometries that are challenging to produce traditionally. Additionally, for large components where fine details are less critical, the high deposition rate of WAAM in comparison to traditional wrought techniques could reduce build times by an order of magnitude. In this context of building and supporting WEC, which experience harsh marine environments, an understanding of performance under large loads and corrosive environments must be understood. Hence, WAAM and wrought A36 steel tensile samples were manufactured, and mechanical properties compared under both dry and corroded conditions. Here, the unique microstructure created via the WAAM process was found to directly correlate to the increased ultimate tensile and yield strength compared to the wrought condition. Static corrosion testing in a simulated saltwater environment in parallel with electrochemical testing highlighted an outperformance of corroded WAAM A36 steel than wrought, despite having a slighter higher corrosion rate. Ultimately, this study shows how marine energy systems may benefit from additive manufacturing components and provides a foundation for future applications of WAAM A36 steel.
A measurement of the top quark pair-production cross section in the lepton + jets decay channel is presented. It is based on 4.6 fb -1 of $\sqrt{s}$ = 7 TeV pp collision data collected during 2011 by the ATLAS experiment at the CERN Large Hadron Collider. A three-class, multidimensional event classifier based on support vector machines is used to differentiate $t\bar{t}$ events from backgrounds. The $t\bar{t}$ production cross section is found to be σ $t\bar{t}$ = 168.5 ± 0.7(stat)$^{+6.2}_{-5.9}$(syst)$^{+ 3.4}_{-3.2}$(lumi) pb. In conclusion, the result is consistent with the Standard Model prediction based on QCD calculations at next-to-next-to-leading order.
Background: Vaccine development against Chlamydia, a prevalent sexually transmied infection (STI), is imperative due to its global public health impact. However, significant challenges arise in the production of effective subunit vaccines based on recombinant protein antigens, particularly with membrane proteins like the Major Outer Membrane Protein (MOMP). Methods: Cellfree protein synthesis (CFPS) technology is an aractive approach to address these challenges as a method of high-throughput membrane protein and protein complex production coupled with nanolipoprotein particles (NLPs). NLPs provide a supporting scaffold while allowing easy adjuvant addition during formulation. Over the last decade, we have been working toward the production and characterization of MOMP-NLP complexes for vaccine testing. Results: The work presented here highlights the expression and biophysical analyses, including transmission electron microscopy (TEM) and dynamic light scaering (DLS), which confirm the formation and functionality of MOMP-NLP complexes for use in animal studies. Moreover, immunization studies in preclinical models compare the past and present protective efficacy of MOMP-NLP formulations, particularly when co-adjuvanted with CpG and FSL1. Conclusion: Ex vivo assessments further highlight the immunomodulatory effects of MOMP-NLP vaccinations, emphasizing their potential to elicitrobust immune responses. However, further research is warranted to optimize vaccine formulations further, validate efficacy against Chlamydia trachomatis, and beer understand the underlying mechanisms of immune response.
This article introduces the Future Foundries platform developed at Oak Ridge National Laboratory, a first-generation research system designed to demonstrate convergent manufacturing. Convergent manufacturing brings together additive, subtractive, and transformative processes in a digitally interconnected environment to enable end-to-end production workflows. By linking traditionally discrete steps, convergent platforms accelerate production, improve repeatability, and support high-mix, low-volume manufacturing. The Future Foundries platform exemplifies this vision in practice by combining four modular, vendor-agnostic process cells that include robotic WAAM, induction heating, optical metrology, and machining, coordinated through an automated pallet handler and a ROS 2-based digital thread. This architecture provides the flexibility and scalability needed for agile production in small and medium-sized manufacturing enterprises and for field deployable manufacturing. Two case studies illustrate the platform’s capabilities. The first presents an integrated workflow for fabricating, transforming, and repairing critical replacement components, showing how consolidated thermal, additive, inspection, and machining operations reduce manual part handling and streamline process flow. The second case study highlights coordinated multi-part production enabled by automated pallet logistics and multi-cell scheduling. Together, these examples showcase convergent manufacturing as a practical and scalable strategy for strengthening domestic casting and forging capacity, improving supply-chain resilience, and enabling rapid, adaptable production of mission-critical components.
Increasing penetrations of renewable-based generation have led to a decrease in the bulk power system inertia and an increase in intermittency and uncertainty in generation. Energy storage is considered to be an important factor to help manage renewable energy generation at greater penetrations. Hydrogen is a viable long-term storage alternative. This paper analyzes and presents use cases for leveraging electrolyzer-based power-to-gas systems for electric grid support. The paper also discusses some grid services that may favor the use of hydrogen-based storage over other forms such as battery energy storage. Real-time controls are developed, implemented and demonstrated using a power-hardware-in-the-loop(PHIL) setup with a 225-kW proton-exchange-membrane electrolyzer stack. These controls demonstrate frequency and voltage support for the grid for different levels of renewable penetration (0%, 25%, and 50%). A comparison of the results shows the changes in respective frequencies and voltages as seen as different buses as a result of support from the electrolyzers and notes the impact on hydrogen production as a result of grid support. Finally, the paper discusses the practical nuances of implementing the tests with physical hardware, such as inverter/electrolyzer efficiency, as well as the related constraints and opportunities.
The objective of this project was to develop a multifunctional in situ platform to link gene expression, regulation, and function with the spatiotemporal context of the whole cell environment. In particular, we focus on a synthetic rhizosphere microhabitat and spatial regulation of genes encoding production of exopolysaccharides, or EPS. We have fully met this objective and report results that support the hypothesis: microbial EPS production, acting at pore throats, limits water evaporation and promotes resilience of terrestrial soil systems.
This report describes our effort in developing a novel zeolite encapsulated metal nanoparticle catalyst for the conversion of syngas to light olefins. We have adopted a ligand assisted synthesis protocol in which first metal-amine was prepared using metal salts and suitable amine ligands. The stable metal-amine complex thus prepared was then used as the seed for the growth of zeolite in alkaline solution. We have optimized the synthesis condition as well as different amine ligand to identify the condition to obtain stable metal-amine complex. Upon synthesis of zeolite, metal particles are encapsulated inside the zeolite in a confined space. We have synthesized both Fe and Co catalyst inside silicalite and chabazite zeolite. Catalytic activity of these catalysts were evaluated for syngas conversion reaction and compared with a baseline catalyst. The activity trend of zeolite encapsulated catalyst show very different activity trend compared to the baseline catalyst. While a distribution of products with different carbon number was obtained with baseline catalyst, zeolite encapsulated catalyst show ethylene as the major product. While ~73% selectivity to C 2 -C 6 products were obtained with cahabazite encapsulated Fe catalyst, only 53% selectivity was obtained for the corresponding products with silica-alumina supported Fe catalyst. Not only higher selectivity, Fe-chabazite also produces only C 2 products (ethylene/ethane) while a distribution of products was obtained with Fe-SiAl catalyst. The significantly different reactivity associated with the chabazite encapsulated Fe catalyst was attributed to the confinement effect. We hypothesized that due to the small size of the pore, only ethylene was obtained as the product.
This analysis was conducted in support of the U.S. Department of Energy's H2@Scale initiative, and this report examines the resources required to meet demand for an additional 10 million metric tonnes (MMT) of hydrogen in 2040. The technical potential of hydrogen production from fossil, nuclear, and renewable energy resources is presented. Updated maps describe the geographical distribution of hydrogen production potential from renewable energy resources. The results conclude that the technical resource availability of domestic energy resources is sufficient to meet an additional 10 MMT of hydrogen demand in 2040, without placing significant pressure on existing resources. While this level of hydrogen demand could result in a significant increase in renewable energy consumption, in particular, the technical potential of each resource is estimated to be sufficient to meet the demand. Future research, to enable the large-scale integration of hydrogen in the U.S. energy and other sectors, will include analyzing the geographic distribution of resources in relation to hydrogen demand for a variety of applications. Additional techno-economic analysis is also needed to understand the economic potential of hydrogen in other industries, beyond transportation; such analysis is currently being undertaken by a multi-lab project initiated by DOE in 2016. Finally, information from techno-economic analyses should be used to continually update and inform R&D targets for energy production, hydrogen production, and hydrogen utilization technologies.
Powdery mildews are obligate biotrophic fungi that manipulate plant metabolism to supply lipids to the fungus, particularly during fungal asexual reproduction when lipid demand is high. We found levels of leaf storage lipids (triacylglycerols, TAGs) are 3.5-fold higher in whole Arabidopsis (Arabidopsis thaliana) leaves with a 15-fold increase in storage lipids at the infection site during fungal asexual reproduction. Lipid bodies, not observable in uninfected mature leaves, were found in and external to chloroplasts in mesophyll cells underlying the fungal feeding structure. Concomitantly, thylakoid disassembly occurred and thylakoid membrane lipid levels decreased. Genetic analyses showed that canonical endoplasmic reticulum TAG biosynthesis does not support powdery mildew spore production. Instead, Arabidopsis chloroplast-localized DIACYLGLYCEROL ACYLTRANSFERASE 3 (DGAT3) promoted fungal asexual reproduction. Consistent with the reported AtDGAT3 preference for 18:3 and 18:2 acyl substrates, which are dominant in thylakoid membrane lipids, dgat3 mutants exhibited a dramatic reduction in powdery mildew-induced chloroplast TAGs, attributable to decreases in TAG species largely comprised of 18:3 and 18:2 acyl substrates. This pathway for TAG biosynthesis in the chloroplast at the expense of thylakoids provides insights into obligate biotrophy and plant lipid metabolism, plasticity, and function. By understanding how photosynthetically active leaves can be converted into TAG producers, more sustainable and environmentally friendly plant oil production may be developed.
To address the lack of data on the behavior of short-lived fission products I-131 (t1/2 = 8.02 d) and Xe-133 (t1/2 = 5.24 d) in the TRISO fuel system, loose AGR-2 particles and kernels were reirradiated in NRAD and subjected to post-reirradiation heating in the FACS furnace. This provided data on the release of fission products from exposed kernels, and the results were used to establish FACS condensation plate collection efficiencies for temperatures of 1000, 1200, and 1400°C where previously, the only collection efficiencies were for 1600°C tests. These new collection efficiencies were then applied to the NRAD-FACS tests of entire AGR-3/4 fuel compacts. Understanding the relative behavior of short-lived I-131, for example, is important because it is a significant contributor to offsite dose during postulated accidents, and Xe-133 has previously been used as a conservative indicator of I-131 behavior. These data will be used to support refinement of fission product transport models and HTGR source-term analyses.
The stability of Ru-based catalysts under harsh electrochemical conditions is a critical challenge limiting their practical application in energy conversion systems. In this study, Ru catalysts supported on ZrO 2-x , CeO 2-x , and ZrCeO 2-x are synthesized via pyrolysis of metal-organic frameworks (MOFs) and systematically evaluated to elucidate the role of support interactions on catalytic performance and durability. Advanced characterization techniques, including HR-TEM, XRD, XPS, and EXAFS, revealed that Ru-ZrCeO 2-x exhibited superior structural stability compared to Ru-ZrO 2-x and Ru-CeO 2-x , particularly under high-potential sweep (HPS) conditions. The incorporation of Ce into ZrO 2-x is shown to stabilize oxygen vacancies and enhance the interaction between Ru catalyst and the support, thereby mitigating catalyst degradation. Density functional theory (DFT) calculations further confirmed that Ce doping decreases formation energy of the oxygen vacancy, providing a thermodynamically favorable environment for Ru stabilization. This work demonstrates the promise of ZrCeO 2-x as a robust support material for Ru-based catalysts, advancing their potential for durable and efficient energy applications.
Microbial consortia have high relevance in natural environments. Here we present the production of polyhydroxyalkanoates (PHA) from agro-industrial residues by a synthetic interkingdom consortium formed by the saprotrophic fungus Ophiostoma piceae CECT 20146, which encodes a wide range of lignocellulolytic enzymes, and a natural PHA producer, Pseudomonas putida KT2440. Two agro-industrial residues were utilized: Brewer's Spent Grain (BSG) as a carbon/nitrogen source and biofilm scaffold and waste cooking oil (WCO) as a carbon source for PHA synthesis. Through biochemistry, microscopy, and omics analyses, it is shown that P. putida accumulates up to 40.2% of intracellular PHA when the quorum sensing molecule, farnesol (naturally produced by O. piceae) is added, thanks to the increased proliferation of P. putida cells. An interactive Shiny application has also been developed for an easy visualization and comprehension of all the transcriptomics and metabolomics data: https://jgf-bioinformatics.shinyapps.io/Visualization_app/. These results support the increased PHA production of the consortium by an induction of gene phaG, which redirects intermediaries of the fatty acid biosynthesis to PHA precursors, and the repression of the PHA depolymerase phaZ in P. putida. The trophic interaction between microorganisms seems to rely on the citric acid produced by O. piceae and the glycerol liberated from WCO, which can both be consumed by P. putida. Bioreactor scale-up experiments allowed a 3.3-fold increase in the PHA concentration in the consortium (6.7 g·L-1) without pretreatment or sterilization of the substrates, laying the groundwork for the implementation of an industrial consolidated bioprocess (CBP).
The Machine Learning Data Platform (MLDP) is a product providing full-stack support for data science, Machine Learning, and Artificial Intelligence (ML/AI) applications at particle accelerator and large experimental physics facilities. It supports ML/AI applications from front-end, high-speed acquisition of heterogeneous, time-series data, through data archiving and management, to back-end analysis. The MLDP embodies a “data-science ready” platform for data analysis and ML/AI applications in diagnosis, modelling, control, and optimization of these facilities. It provides data scientists and applications a consistent, datacentric interface to archive data standardizing implementation and deployment of ML/AI algorithms to different operations configurations within the same facility, or between facilities. Being an open-source, public-domain project, the MLDP is intended for broadest possible impact by increasing accessibility and minimizing the required expertise for installation and operation. The MLDP can also be deployed at user facilities for experimental data collection, archiving, and analysis. It is capable of acquisition and archiving of heterogeneous data from experimental equipment (e.g., images, arrays, structures, etc.) along with system hardware configurations (e.g., scalars, tables), control system process variables, and any metadata required for provenance. Thus, the MLDP can manage experimental data through its entire lifecycle, from acquisition and archiving, through analysis and investigation, to release and final publication.
In December 2018, a partnership between the U.S. Department of Energy National Energy Technology Laboratory (DOE NETL), the Japan Oil, Gas and Metals National Corporation (JOGMEC), and the U.S. Geological Survey (USGS) successfully drilled and logged the Hydrate-01 Stratigraphic Test Well (STW) in the greater Prudhoe Bay oil field on Alaska North Slope. The logging-while-drilling (LWD) data confirmed the presence of gas hydrate-bearing reservoirs within two sand reservoirs (Unit B and Unit D) that are suitable targets for future testing. The interpreted log data and core sample measurements were used to create reservoir models for the Prudhoe Bay Unit (PBU) Kuparuk 7-11-12 Site. The models combine both gas hydrate-bearing sections in Unit B and Unit D together with the intermediate Unit C and over- and underburden sands and shales. The vertical heterogeneity in porosity, gas hydrate saturation, and permeability distributions for reservoir and non-reservoir units was implemented using fine mesh discretization. The depressurization method was applied to Unit B to induce gas hydrate destabilization at constant bottom hole pressure (BHP) values. The results of the numerical simulations support the development of production scenarios, well design, surface facilities, and field test procedures with the main goal to perform efficient and safe scientific production testing. Project results contribute to the knowledge base of permafrost-associated gas hydrate accumulations as a future energy source.