Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Obtaining of SmS based semiconducting material and investigation of its electrical properties

Semiconductor samarium monosulfide polycrystals obtained by reaction between samarium trihydride (SmH{sub 3}) and its sesquisulfide were studied. The temperature, baric and frequency dependences of the resistivity and structural features of the samples were investigated. It is shown that the value of X-ray coherent scattering region is extremely small for SmS samples, 320 A; critical pressure of semiconductor-metal phase transition is higher than in the samples, obtained by other methods, 0.88 GPa; the temperature dependence of the resistivity has metallic behavior. Hopping mechanism of electron transport was found. All these features are explained by more defective structure of the polycrystalline SmS samples.

36 MATERIALS SCIENCE↗

Effect of composition and grain size on slow plastic flow properties of NiAl between 1200 and 1400 K

A series of about 15-micron diameter polycrystalline B2 crystal structure NiAl alloys ranging in composition from 43.9 to 52.7 Al (at. pct) have been compression tested at constant velocities in air between 1200 and 1400 K. All materials were fabricated via powder metallurgy techniques with hot extrusion as the densification process. Seven intermediate compositions were produced by blending various amounts of two master heats of prealloyed powder; in addition, a tenth alloy of identical composition, 48.25 Al, as one of the blended materials, was produced from a third master heat. Comparison of the flow stress-strain rate behavior for the two 48.25 Al alloys revealed that their properties were identical. The creep strength of materials for Al/Ni not above 1.03 was essentially equal, and deformation could be described by a single stress exponent and activation energy. Creep at low temperatures and faster strain rates is independent of grain sizes and appears to be controlled by a subgrain mechanism. However, at higher temperatures and slower strain rates, diffusional creep seems to contribute to the overall deformation rate.

Whittenberger, J. Daniel↗

Structural and morphological properties of sputtered NiO thin films at various sputtering pressures

Nickel oxide thin films were successfully deposited on glass substrates at different sputtering pressures in the range of 3 x 10{sup -2} to 5 x 10{sup -2} mbar. It was observed that sputtering pressure influenced the structural and morphological properties. Structural properties were studied with X-ray diffractometer. All the deposited films were polycrystalline and exhibited cubic structure with preferential growth along (220) plane. From morphological studies it was observed that fine and uniform grains with RMS roughness of 9.4 nm were obtained when the films deposited at a sputtering pressure of 4 x 10{sup -2} mbar,. The grain size and the surface roughness decreased at higher sputtering pressures. The surface mobility of the adatoms decreased after series of collisions resulting in the decrease of grain size at high sputtering pressures.

36 MATERIALS SCIENCE↗

A New Residual Strain Mapping Program Using Energy Dispersive X-Ray Diffraction at the Advanced Photon Source

Here, the ability to non-destructively map the residual strain field inside an engineering component is important for predicting its fatigue life or developing processing methods to prevent failure or enhance performance. In this paper, we describe a new residual strain mapping program at the Advanced Photon Source, Argonne National Laboratory. The new program is based on energy dispersive x-ray diffraction (EDXRD). It is capable of non-destructively penetrating a several- cm thick polycrystalline sample fabricated from engineering alloys using high-energy x-rays and measuring the residual strain field with mm or better spatial resolution and approximately ±1 x 10 -4 strain resolution. A multi-element detector array is employed to measure multiple strain components simultaneously. The residual strain mapping setup is augmented with a high-energy tomography capability, allowing precise alignment of the material volume of interest for residual strain mapping and providing a complementary view of the structure to understand the measured strain field. These measurement capabilities are demonstrated using several strain mapping examples ranging from polycrystalline structural alloys to biological materials. We also provide some guidance for the future users of the program for a successful residual strain mapping experiment. We are expanding the capabilities of the new setup with various in situ capabilities including thermo-mechanical loading.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of ZnO thin films grown on different p-Si substrate elaborated by solgel spin-coating method

Highlights: • High quality ZnO thin films grown on different p-Si substrates were successful obtained by sol–gel process. • PL measurement revealed that ZnO thin film grown on porous Si has the better optical quality. • I–V characteristics for all heterojunctions exhibit successful diode formation. • The diode ZnO/PSi shows a better photovoltaic effect under illumination with a maximum {sub Voc} of 0.2 V. - Abstract: In this study, ZnO thin films are deposited by sol–gel technique on p-type crystalline silicon (Si) with [100] orientation, etched silicon and porous silicon. The structural analyses showed that the obtained thin films were polycrystalline with a hexagonal wurtzite structure and preferentially oriented along the c-axis direction. Morphological study revealed the presence of rounded and facetted grains irregularly distributed on the surface of all samples. PL spectra at room temperature revealed that ZnO thin film grown on porous Si has a strong UV emission with low defects in the visible region comparing with ZnO grown on plat Si and etched Si surface. The heterojunction parameters were evaluated from the (I–V) under dark and illumination at room temperature. The ideality factor, barrier height and series resistance of heterojunction grown on different p-Si substrates are determined by using different methods. Best electrical properties are obtained for ZnO layer deposited on porous silicon.

36 MATERIALS SCIENCE↗

Polycrystalline Mg{sub 2}Si thin films: A theoretical investigation of their electronic transport properties

The electronic structures and thermoelectric properties of a polycrystalline Mg{sub 2}Si thin film have been investigated by first-principle density-functional theory (DFT) and Boltzmann transport theory calculations within the constant-relaxation time approximation. The polycrystalline thin film has been simulated by assembling three types of slabs each having the orientation (001), (110) or (111) with a thickness of about 18 Å. The effect of applying the relaxation procedure to the thin film induces disorder in the structure that has been ascertained by calculating radial distribution functions. For the calculations of the thermoelectric properties, the energy gap has been fixed at the experimental value of 0.74 eV. The thermoelectric properties, namely the Seebeck coefficient, the electrical conductivity and the power factor, have been determined at three temperatures of 350 K, 600 K and 900 K with respect to both the energy levels and the p-type and n-type doping levels. The best Seebeck coefficient is obtained at 350 K: the S{sub yy} component of the tensor amounts to about ±1000 μV K{sup −1}, depending on the type of charge carriers. However, the electrical conductivity is much too small which results in low values of the figure of merit ZT. Structure–property relationship correlations based on directional radial distribution functions allow us to tentatively draw some explanations regarding the anisotropy of the electrical conductivity. Finally, the low ZT values obtained for the polycrystalline Mg{sub 2}Si thin film are paralleled with those recently reported in the literature for bulk chalcogenide glasses. - Graphical abstract: Structure of the polycrystalline thin film of Mg{sub 2}Si. - Author-Highlights: • Polycrystalline Mg{sub 2}Si film has been modelled by DFT approach. • Thermoelectric properties have been evaluated by semi-classical Boltzmann theory. • The structure was found to be slightly disordered after relaxation. • The highest value of Seebeck coefficient reaches −1000 μV/K at 350 K. • The ZT value is estimated between 0.0175 at 350 K and 0.2 at 900 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Co{sub 2+} substitution in Mg{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles: Study of structural, dielectric and magnetic properties

Polycrystalline samples of Mg{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} (0 ≤ x ≤ 0.5) with x varying from 0.0-0.5 synthesized by sol-gel auto ignition method. The X-ray diffraction analysis with Retvield refinement reveals the formation of single phase cubic spinel structure. The frequency dependent of real part of dielectric constant has been measured at room temperature and at 100 °C by using an ac impedance analyzer. Except x = 0.5, an increase in the dielectric constant is observed with increase in Co{sup 2+} substitution. Magnetic response has been seen by vibrating sample magnetometer (VSM) at room temperature. The saturation magnetization (M{sub S}) and coercivity (H{sub C}) increase with increasing the Co{sub 2+} substitution. The cation distribution estimated by Mössbauer spectroscopy shows that Co{sub 2+} and Mg{sub 2+} ions have their preference towards octahedral B site, on the other hand Zn{sub 2+} ions preferentially occupy tetrahedral A site, whereas Fe{sub 3+} ions are randomly distributed over A- and B-site. The as obtained results indicated that the substitution of Co{sub 2+} has brought the significant changes in the structural, electrical and magnetic properties of as prepared Mg-Zn-Co multioxide nanocrystals.

36 MATERIALS SCIENCE↗

Enhanced thermal conductivity of polycrystalline aluminum nitride thin films by optimizing the interface structure

The growth-temperature dependency and interface structure effects on the thermal conductivity of the highly textured AlN thin films on (001) Si substrates were systematically studied by characterizing the crystal structures, surface morphologies, interface structures, chemical compositions, and thermal conductivity using x-ray diffraction analysis, atomic force microscopy, high resolution transmission electron microscopy, x-ray photoelectron spectroscopy, and 3-omega method, respectively. By optimizing the interface microstructure and the growth temperature, thermal conductivity of polycrystalline AlN thin films can be greatly enhanced from 9.9 to 26.7 W/mK, when the growth temperature increases from 330 to 560 Degree-Sign C. This achievement is considered to be associated with the diminishment of the amorphous and disordered layer at the AlN/Si interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of ZnO thin films

Zinc oxide (ZnO) Thin films were deposited on glass substrate using Spin coating method. Zinc acetate dehydrate, Carbinol and Mono-ethanolamine were used as the precursor, solvent and stabilizer respectively to prepare ZnO Thin-films. The molar ratio of Monoethanolamine to Zinc acetate was maintained as approximately 1. The thickness of the films was determined by Interference technique. The optical properties of the films were studied by UV Vis-Spectrophotometer. From transmittance and absorbance curve, the energy band gap of ZnO is found out. Electrical Conductivity measurements of ZnO are carried out by two probe method and Activation energy for the electrical conductivity of ZnO are found out. The crystal structure and orientation of the films were analyzed by XRD. The XRD patterns show that the ZnO films are polycrystalline with wurtzite hexagonal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman effect, structural and dielectric properties of sol-gel synthesized polycrystalline GaFe{sub 1-x}Zr{sub x}O{sub 3} (0≤x≤0.15)

Polycrystalline ceramic samples of Zirconium (Zr)-doped GaFeO{sub 3} (GaFe{sub 1-x}Zr{sub x}O{sub 3}) were studied using powder X-ray diffraction, complex impedance spectroscopy and Raman spectroscopic measurements to understand the effect of Zr doping on the structural and dielectric properties. The samples with varying Zr content were prepared by Sol-Gel method. X-ray data analysis confirmed the formation of single phase material without formation of any secondary phases and all are crystallized in Pc2{sub 1}n orthorhombic symmetry. Rietveld refinement of the X-ray data suggested an increase in the lattice constants due to size effect and decreases on x = 0.15 due to the effect of change in interplanner spacing. Impedance studies on the samples showed that the dielectric constant increases while loss tangent decrease as the Zr content increases. Raman scattering on GaFe{sub 1-x}Zr{sub x}O{sub 3} (x = 0, 0.05, 0.10, & 0.15) used to understand the composition dependence on phonon modes at room temperature. On Zr doping, Raman modes frequencies shifts to lower energies consistent with the X-ray data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of chemical substitution on the photoluminescence of Sr{sub (1−x)}Pb{sub x}WO{sub 4} solid solution

The solid solution Sr{sub 1−x}Pb{sub x}WO{sub 4} based on luminescent tungstates SrWO{sub 4} and PbWO{sub 4} has been synthesized by solid-state reaction for all compositions 0≤x≤1. Using Rietveld method, the structural data of all polycrystalline samples have been refined and crystal cell parameters exhibited a linear behavior as a function of x. All substituted structures are of scheelite type. Scanning electron microscopy showed that a high level of crystallization characterized the samples, with modifications in sizes and shapes depending on composition x. Infrared and Raman spectroscopy have been performed to characterize the evolution of vibrational modes with substitution rate. Finally, a systematic study of luminescence under X-ray excitation has been performed: in the composition range x=0.2 to 0.4, intensities of emission exhibited increased values. The luminescence profiles have been interpreted in terms of four Gaussian components, two of them depending on substitution rate. - Graphical abstract: Photoluminescence under X-ray excitation of Sr{sub 1−x}Pb{sub x}WO{sub 4} solid solution: (left) decomposition of emission large band into four components for composition x=0.3; (right) variation of total emission intensity with composition x. - Highlights: • Structural study of solid solution Sr{sub 1−x}Pb{sub x} WO{sub 4} using Rietveld analyses. • Variation of Debye–Waller factor with composition x, disorder parameter. • Existence of four components of luminescence under X-ray excitation. • Effect of substitution of Sr by Pb on two components, due to Pb–O–W interactions. • Enhancement of luminescence intensity in a specific composition range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidized structure and Compositional properties of 1144 phase FBS by analytical electron microscopy

The 1144 phase (Ae1A1Fe4As4) shows a strong advantage of engineering fabrication among Fe Iron)-based superconductor (FBS) family due to the robustness of its superconducting properties with respect to chemical inhomogeneities, granted by its uniform crystalline-layered structure. This regularity is furthermore associated to crystalline defects capable of acting as efficient pinning centers, which high critical currents achieved at high fields for these superconductors. Like other FBS phases, its lossless current-carrying capability can be remarkably degraded by distractions at grain boundaries (GBs). GB oxidation is an issue of upmost importance to the realization of the practical FBS application for high field (> 20T) magnet. In this study, we explore oxidized grain boundary and intrinsic grain structural properties of 1144 polycrystalline samples by applying analytical electron microscopy such as atomic resolution scanning transmission electron microscopy and atom probe tomography. These structural properties of samples produced by a mechanochemically assisted synthesis are evaluated following the degradation of superconducting properties due to oxidation. We observe a strong correlation between the contamination at grain boundaries and the decrease of transport properties of the bulk sample, while the crystallin structure seems to be not affected by the oxidation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Inferring grain boundary structure–property relations from effective property measurements

Grain boundaries strongly affect many materials properties in polycrystalline materials. Yet, very few structure–property models exist for grain boundaries, due in large part to the complicated and poorly understood way in which the properties of grain boundaries vary with their crystallographic structure. Here, we infer grain boundary structure–property correlations from measurements of the effective properties of a polycrystal. We refer to this method as grain boundary properties localization. We apply this technique to a simple model system of grain boundary diffusivity in a two-dimensional microstructure, and infer the properties of low- and high-angle grain boundaries from the effective diffusivity of the grain boundary network. The generalization and use of these methods could greatly reduce the computational and experimental effort required to establish structure–property correlations for grain boundaries. More broadly, the technique of properties localization could be used to infer the properties of many microstructural constituents in complex microstructures.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, Structural and Electrical Properties of layer structured Ba{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18} compound

The polycrystalline ceramic samples of layer structured Aurivillius oxide of general formula Ba{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18}(BBTO) have been prepared by high temperature solid state reaction technique. The formation of the compound as well as its structural refinement have been carried out using X-ray diffraction followed by Rietveld refinement analysis. There is a good agreement between observe and calculated d-values. The calculated lattice parameters are better than the earlier report. The dielectric constant and loss and hence a.c. conductivity have been measured as a function of frequency (100 Hz-2 MHz) and temperature (RT to 370 deg. C). The dielectric constant shows an anomaly at around 335 deg. C. The results are discussed in detail.

36 MATERIALS SCIENCE↗

Thermally evaporated mechanically hard tin oxide thin films for opto-electronic apllications

Tungsten doped tin oxide (WTO) and Molybdenum doped tin oxide (MoTO) thin film were deposited on corn glass by thermal evaporation method. The films were annealed at 350°C for one hour. Structural analysis using Xray diffraction data shows both the films are polycrystalline in nature with monoclinic structure of tin oxide, Sn{sub 3}O{sub 4}, corresponding to JCPDS card number 01-078-6064. SEM photograph showed that both the films have spherical grains with size in the range of 20–30 nm. Compositional analysis was carried out using EDS which reveals the presence of Sn, O and the dopant Mo/W only thereby indicating the absence of any secondary phase in the films. The films are found to contain nearly 6 wt% of Mo, 8 wt% of W as dopants respectively. The transmission pattern for both the films in the spectral range 200 – 2000 nm shows that W doping gives a transparency of nearly 80% from 380 nm onwards while Mo doping has less transparency of 39% at 380nm. Film hardness measurement using Triboscope shows a film hardness of about 9–10 GPa for both the films. It indicates that W or M doping in tin oxide provides the films the added advantage of withstanding the mechanical wear and tear due to environmental fluctuations By optimizing the optical and electrical properties, W/Mo doped tin oxide films may be explored as window layers in opto-electronic applications such as solar cells.

36 MATERIALS SCIENCE↗

Microstructural and Superconducting Radiofrequency Properties of Multilayer Sequentially Sputtered Nb 3 Sn films

Nb 3 Sn is considered as a potential candidate for superconducting radiofrequency cavities for particle acceleration due to its higher transition temperature of 18.3 K and higher superheating field of 400 mT. Nb 3 Sn films can be grown inside the surface of a Nb cavity by sequentially sputtering multiple layers of Nb and Sn thin films followed by annealing at 950 °C for 3 h. We report on the properties of Nb 3 Sn films grown on Nb substrates by magnetron sputtering. The films’ crystal structure, surface morphology, and composition were characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The films had a polycrystalline Nb 3 Sn structure with a fine-grain surface and an atomic Sn composition of ~23%. The RF surface resistance of the films was measured for different temperatures at 7.4 GHz to understand the feasibility of this method for the SRF application. The RF surface resistance of the films was 5 mΩ at 12 K, which is about 2 orders of magnitude higher than 60 μΩ previously measured in Nb 3 Sn films grown by Sn vapor diffusion. Finally, the sputtered film had a superconducting transition at 17.2 K, which is also lower than 17.9 K observed in Nb 3 Sn film prepared by vapor diffusion.

43 PARTICLE ACCELERATORS↗