Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photon absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Broad absorption-line time variability in the QSO CSO 203

We present spectroscopy of the BALQSO CSO 203 during four epochs over a 17-month time span. These data show three distinct levels in the broad absorption lines (BALs) of Si IV 1397A and C IV 1549A. We also note possible variations in the N V 1240A and Al III 1857A absorption troughs. A broad-band monitoring effort during this period shows that the continuum level remained constant to within 10 percent. We argue that the triggering mechanism for the absorption-line changes is most likely synchronous with the continuum source photons; however, no correlation with the central source has yet been found. The observed variations are consistent with changes in the ionization level in the broad absorption-line region (BALR). We discuss possible mechanisms for these changes and the implications for the structure of the BALR.

Barlow, Thomas A.↗

Implications for High Energy Blazar Spectra from Intergalactic Absorption Calculations

Given a knowledge of the density spectra intergalactic low energy photons as a function of redshift, one can derive the intrinsic gamma-ray spectra and luminosities of blazars over a range of redshifts and look for possible trends in blazar evolution. Stecker, Baring & Summerlin have found some evidence hinting that TeV blazars with harder spectra have higher intrinsic TeV gamma-ray luminosities and indicating that there may be a correlation of spectral hardness and luminosity with redshift. Further work along these lines, treating recent observations of the blazers lES02291+200 and 3C279 in the TeV and sub-TeV energy ranges, has recently been explored by Stecker & Scully. GLAST will observe and investigate many blazars in the GeV energy range and will be sensitive to blazers at higher redshifts. I examine the implications high redshift gamma-ray absorption for both theoretical and observational blazer studies.

Stecker, F↗

Airborne Lidar Measurements of Atmospheric Pressure Made Using the Oxygen A-Band

We report on airborne measurements of atmospheric pressure using a fiber-laser based lidar operating in the oxygen A-band near 765 nm and the integrated path differential absorption measurement technique. Our lidar uses fiber optic technology and non-linear optics to generate tunable laser radiation at 765 nm, which overlaps an absorption line pair in the Oxygen A-band. We use a pulsed time resolved technique, which rapidly steps the laser wavelength across the absorption line pair, a 20 cm telescope and photon counting detector to measure Oxygen concentrations.

Riris, Haris↗

The Hubble Space Telescope quasar absorption line key project. 6: Properties of the metal-rich systems

We present an analysis of the properties of a sample of 18 metal-rich, low-redshift z(sub abs) much less than z(sub em) absorbers seen in low- and medium-resolution spectra obtained for the Quasar Absorption Line Key Project with the Hubble Space Telescope Faint Object Spectrograph (HST/FOS). For most of the C IV and Lyman-limit systems, observations in the optical wavelength range of the expected associated Mg II absorption are available. As at high redshift (z approximately 2), there are two subclasses of absorbers which are characterized by the presence or absence of MG II absorption. However, some low-redshift Mg II and Fe absorptions originate from regions optically thin to UV ionizing photons and thus, at low redshift, the low-ionization systems do not always trace high opacities, as is the case at high redshift. This implies that the mean ionization state of metal-rich, optically thin absorbing clouds falls with decreasing redshift, which is consistent with the hypothesis that the gas is photoionized by the metagalactic UV background radiation field. Two main constraints are derived from the analysis of the Lyman-limit sample, assuming photoionization models are valid. First, a low opacity to ionizing photons (tau(sub LL) approximately less than 1), as observed for several Mg II-Fe II systems at z approximately 0.5, sets limits on the ionization level of hydrogen, thus on the total hydrogen column density and the heavy element abundances, (Z/H) approximately -0.5 to -0.3. Second, the dimensions of individual Mg II clouds are smaller than at high redshift by a factor 3-10. At z approximately greater than 0.6, the O VI absorption doublet is detected in four of the five z(sub abs) much less than z(sub em) systems for which the O VI wavelength range has been observed, whereas the associated N V doublet is detected in only two cases. This suggests that the presence of a high-ionization O VI phase is a general property of z approximately 0.6-1 absorption systems, as is also probably the case at high redshift. These O VI absorbers can be ionized by the UV metagalactic field if their density is low, nH approximately less than 3 x 10(exp -4)/cc. The O VI phase would then be a homogeneous region of large extent, r approximately greater than 50 kpc. A detailed photoionization model of the z(sub abs) = 0.791 absorber toward PKS 2145+06 confirms the properties derived from the Mg II, C IV, O VI, and Lyman-limit samples. The galaxy causing this extensive metal-line absorption system has been identified, and its possible contribution to the UV ionizing flux does not substantially modify the value of the derived parameters. The heavy element abundances are about half the solar values. The O VI region has a density about 20 times lower than the Mg II clouds and a size of approximately 70 kpc. Alternatively, the high-ionization phase could be collisionally ionized and trace gas associated with a possible group of galaxies at the absorber redshift.

Bergeron, Jacqueline↗

Galactic absorption of high-energy gamma-rays from Cygnus X-3

The importance of cosmic blackbody photons as an absorbing gas for the attenuation of high-energy photons via pair production in photon-photon collision is examined for the specific case of gamma rays from Cyg X-3. Recent observational results on this photon flux in the range from 2 x 10 to the 15th to 2 x 10 to the 16th eV are corrected for this attenuation. The absorption optical depth to the source is about unity, and the corrected flux is about a factor of three higher; as a result, it does not extrapolate from the data at lower energies (10 to the 12th eV).

Gould, R. J.↗

Airborne Lidar Measurements of Atmospheric Pressure Made Using the Oxygen A-Band

Accurate measurements of greenhouse gas mixing ratios on a global scale are currently needed to gain a better understanding of climate change and its possible impact on our planet. In order to remotely measure greenhouse gas concentrations in the atmosphere with regard to dry air, the air number density in the atmosphere is also needed in deriving the greenhouse gas concentrations. Since oxygen is stable and uniformly mixed in the atmosphere at 20.95%, the measurement of an oxygen absorption in the atmosphere can be used to infer the dry air density and used to calculate the dry air mixing ratio of a greenhouse gas, such as carbon dioxide or methane. OUT technique of measuring Oxygen uses integrated path differential absorption (IPDA) with an Erbium Doped Fiber Amplifier (EDF A) laser system and single photon counting module (SPCM). It measures the absorbance of several on- and off-line wavelengths tuned to an O2 absorption line in the A-band at 764.7 nm. The choice of wavelengths allows us to maximize the pressure sensitivity using the trough between two absorptions in the Oxygen A-band. Our retrieval algorithm uses ancillary meteorological and aircraft altitude information to fit the experimentally obtained lidar O2 line shapes to a model atmosphere and derives the pressure from the profiles of the two lines. We have demonstrated O2 measurements from the ground and from an airborne platform. In this paper we will report on our airborne measurements during our 2011 campaign for the ASCENDS program.

Riris, Haris↗

Stimulated emission in multiple-photon-pumped xenon and argon excimers.

A pumping process involving the multiphoton absorption of laser radiation at 3547 and 2660 A is employed in the investigation. Typically, about 25% of the incident pumping radiation is absorbed and effective in producing excimer fluorescence. The four cases studied include 2660-A-pumped argon, 2660-A-pumped xenon, 3547-A-pumped xenon, and 3547-A-pumped argon. Results concerning the on-axis and off-axis fluorescence obtained from the excimers are presented in a graph.

Harris, S. E.↗

The Origin of the X-Ray and Ultraviolet Emission in NGC 7469

We present a spectral analysis of a approx 30 day, near-continuous observation of the Seyfert 1 galaxy NGC 7469 with RXTE. Daily integrations show strong spectral changes during the observation. Our main result is that we find the X-ray spectral index to be correlated with the UV flux. Furthermore, the broadband X-ray photon flux is also correlated with the UV continuum. These correlations point toward a model in which the X-rays originate via thermal Comptonization of UV seed photons. Furthermore, the UV is also correlated with the extrapolation of the X-ray power law into the soft X-ray/EUV region. Our data analysis therefore reopens the possibility that the UV photons and their variability arise from reprocessing, as long as the primary source of heating is photoelectric absorption in the re-processor, rather than Compton down-scattering. A coherent picture of the X-ray/UV variability can therefore be constructed whereby absorption and reprocessing of EUV/soft X-rays in a standard accretion disk produce a variable seed photon distribution, which is in turn up-scattered into the X-ray band. We also find a significant correlation between the 2-10 keV flux and the 6.4 keV iron K-alpha line, suggesting that at least some portion of the line originates within approx. 1 light day of the X-ray continuum source. Neither the power-law photon index nor the Compton reflection component are correlated with the 2-10 keV flux. The latter is not correlated with the iron K-alpha line flux either. We do find an apparent correlation between the X-ray spectral index and the strength of the Compton reflection component. In an Appendix we show, however, that this can be produced by a combination of statistical and systematic errors. We conclude that the apparent variations in the Compton reflection component may be an artifact of these effects.

Nandra, K.↗

Gas-core reactor power transient analysis.

The nuclear fuel in the gas-core reactor concept is a ball of uranium plasma radiating thermal photons. The photons are met by an inflowing hydrogen stream, which is seeded with submicron size, depleted uranium particles. A 'wall-burnout' condition exists if the thermal photons can reach the cavity liner because of insufficient absorption by the hydrogen. An analysis was conducted in order to determine the time for which the maximum steady state reactor power could be exceeded without damage to the cavity liner due to burnout. Wall-burnout time as a function of the power increase above the initial steady state condition is shown in a graph.

Kascak, A. F.↗

P-Cygni features and photospheric velocities

The photospheric velocities implied from the P-Cygni features of H-alpha, H-beta, and H-gamma in SN 1987A differ. This implies that the 'photosphere' relevant to P-Cygni formation may be frequency dependent. To obtain a P-Cygni feature from above a fixed surface, the photons leaving there must not undergo other frequency dependent absorption processes (bound-free or free-free) or be smeared in frequency due to multiple Thomson scattering. The paper delineates different regimes when the frequency dependence of this surface should be manifest, and those when it would not be.

Bildsten, Lars↗

Deformed ellipsoidal diffraction grating blank

The Deformed Ellipsoidal Grating Blank (DEGB) is the primary component in an ultraviolet spectrometer. Since one of the major concerns for these instruments is throughput, significant efforts are made to reduce the number of components and subsequently reflections. Each reflection results in losses through absorption and scattering. It is these two sources of photon loss that dictated the requirements for the DEGB. The first goal is to shape the DEGB in such a way that the energy at the entrance slit is focused as well as possible on the exit slit. The second goal is to produce a surface smooth enough to minimize the photon loss due to scattering. The program was accomplished in three phases. The first phase was the fabrication planning. The second phase was the actual fabrication and initial testing. The last phase was the final testing of the completed DEGB.

Decew, Alan E., Jr.↗

Position Sensitive Microcalorimeters

A Position Sensitive Transition-Edge Sensor (PoST) is a microcalorimeter device capable of one-dimensional imaging spectroscopy. The device consists of two Transition-Edge Sensors (TESs) connected to the ends of a long X-ray absorbing strip. The energy of a photon hitting the absorber and the position of the absorption event along the strip is measured from the response in the two sensors by analyzing the relative signal sizes, pulse rise times, and the sum of the pulses measured at each sensor, We report on the recent PoST effort at Goddard for applications to large field of view, high-energy- resolution, X-ray astrophysics.

Sadleir, J. E.↗

Time variations of an absorption feature in the spectrum of the gamma-ray burst on 1980 April 19

The photon number spectrum integrated over the impulsive part of the event is shown to fit a thermal bremsstrahlung function with a temperature of 330 + or - 70 keV at energies between 151 and 487 keV. At lower energies, the data points lie considerably below this function, indicating a broad absorption feature extending down to values less than or equal to 28 keV, the lowest energy measured. The upper energy of this absorption feature varies from 100 to 150 keV on a time scale less than or equal to 0.5 s. This event is interpreted as a typical gamma ray burst, even though it is still considered remotely possible that it is of solar origin. The spectral features, together with their variability, are interpreted in terms of electron interactions at the cyclotron resonance frequency in magnetic fields of 10 to the 12th - 10 to the 13th gauss close to the surface of a neutron star.

Dennis, B. R.↗

Cyclotron Resonant Scattering Feature Simulations I. Thermally Averaged Cyclotron Scattering Cross Sections, Mean Free Photon-Path Tables, and Electron Momentum Sampling

Electron cyclotron resonant scattering features (CRSFs) are observed as absorption-like lines in the spectra of X-ray pulsars. A significant fraction of the computing time for Monte Carlo simulations of these quantum mechanical features is spent on the calculation of the mean free path for each individual photon before scattering, since it involves a complex numerical integration over the scattering cross section and the (thermal) velocity distribution of the scattering electrons. We aim to numerically calculate interpolation tables which can be used in CRSF simulations to sample the mean free path of the scattering photon and the momentum of the scattering electron. The tables also contain all the information required for sampling the scattering electron's final spin. The tables were calculated using an adaptive Simpson integration scheme. The energy and angle grids were refined until a prescribed accuracy is reached. The tables are used by our simulation code to produce artificial CRSF spectra. The electron momenta sampled during these simulations were analyzed and justified using theoretically determined boundaries. We present a complete set of tables suited for mean free path calculations of Monte Carlo simulations of the cyclotron scattering process for conditions expected in typical X-ray pulsar accretion columns (0.01 B/B(sub crit) is less than or equal to 0.12, where B(sub crit) = 4.413 x 1013 G, and 3 keV kBT 15 keV). The sampling of the tables is chosen such that the results have an estimated relative error of at most 1/15 for all points in the grid. The tables are available online (see link in footnote, page 1).

Schwarm, F.-W.↗

The transfer of resonance-line radiation in static astrophysical media

An analytic solution is derived for the mean intensity of resonance-line radiation within an absorbing medium of large scattering optical depth but low density. The line profile, the mean number of scatterings before absorption or escape, the mean path length traveled, and the fraction of the photons which escape the medium are derived. Approximate methods are also developed which permit the treatment of media of intermediate optical depth, where scattering takes place in the Doppler core. Astrophysical applications include the absorption of H Ly-alpha radiation by stellar dust, the pumping of H2 Lyman band lines by H Ly-alpha and the Bowen fluorescence.

Neufeld, David A.↗

Continuum, cyclotron line, and absorption variability in the high-mass X-ray binary Vela X-1

Because of its complex clumpy wind, prominent cyclotron resonant scattering features, intrinsic variability, and convenient physical parameters (close distance, high inclination, and small orbital separation), which facilitate the observation and analysis of the system, Vela X-1 is one of the key systems for understanding accretion processes in high-mass X-ray binaries on all scales. We revisit Vela X-1 with two new observations taken with NuSTAR at orbital phases ∼0.68–0.78 and ∼0.36–0.52, which show a plethora of variability and allow us to study the accretion geometry and stellar wind properties of the system. We follow the evolution of spectral parameters down to the pulse period timescale using a partially covered power law continuum with a Fermi-Dirac cutoff to model the continuum and local absorption. We are able to confirm anti-correlations between the photon index and the luminosity and, for low fluxes, between the folding energy and the luminosity, implying a change of properties in the Comptonising plasma. We were not able to confirm a previously seen correlation between the cyclotron line energy and the luminosity of the source in the overall observation, but we observed a drop in the cyclotron line energy following a strong flare. We see strong variability in absorption between the two observations and within one observation (for the ∼0.36–0.52 orbital phases) that can be explained by the presence of a large-scale structure, such as accretion and photoionisation wakes in the system, and our variable line of sight through this structure.

C. M. Diez↗

Lidar Measurements of Methane and Applications for Aircraft and Spacecraft

Atmospheric methane levels have remained relatively constant over the last decade around 1.78 parts per million (ppm) but observations since 2007 show that levels may be increasing. This trend may be caused by increased fossil fuel production, rice farming, livestock and landfills, but the underlying causes are quite uncertain. One hypothesis is that reservoirs of carbon trapped in the permafrost regions of northern Canada, Europe, and Siberia thaw as global temperatures rise and are releasing increasing amounts of methane. Another hypothesis points to increased production of methane by microbes as the permafrost warms. Currently most observations of greenhouse gases are limited to in-situ (surface and tower sites) and limited airborne in-situ measurements. Space column density measurements are starting to become available from the GOSAT mission. Although methane survives for a shorter time in the atmosphere than CO2, its impact on climate change per molecule is about 23 times than that of CO2. Accurate global observations of several greenhouse gases, including methane, are urgently needed in order to better understand climate change processes and to reduce the uncertainty in the carbon budget. Differential absorption lidar is a well-established technique to measure atmospheric gases, and methane has optical absorption bands near 1.65,2.2,3.4 and 7.8 micron. The near infrared overtones lines of CH4 near 1650 nm are relatively free of interference from other species. There are absorption lines near 1651 nm which are both temperature insensitive and have line strengths well suited for lidar measurements. We have developed a laser and demonstrated lidar measurements of CH4 using lines in this band. Our laser uses a narrow linewidth 1064 nm laser pulse passing through a nonlinear crystal. We generate the tunable laser signals near 1651 nm by using the optical parametric amplification (OPA) process. Inside the crystal the 1064 nm beam overlaps with an injection seed laser near 1651 nm from a wavelength tunable diode laser. Incident photons from the pump laser pulse are converted into two photons, with one at the wavelength of the injection seeder. The wavelength of the OPA output is tuned via the wavelength of diode laser. Our laser is tunable, operates near 1651 nm and generates approximately 4 uJ/pulse at 6 KHz. We vary the emission wavelengths within this band by tuning the diode laser's wavelength. We have used this OPA transmitter to make measurements of CH4 at various pressures in a gas cell and over open outdoor horizontal paths. We have measured the lineshape of methane in a 6 cm long cell at various energy levels with this transmitter, with excellent agreement with the lineshape calculated by HITRAN. We have also measured the absorption lineshape of atmospheric methane in an open 3 km outdoor path. The agreement between the measurements and HITRAN, for 1746 ppb and 760 Torr was quite good. We have also made pulsed two wavelength lidar measurements of methane line absorption in the column to a tower at 1.5 km range. These used on- and off-line wavelengths of 1650.957 nm, and 1651.072 nm, and a 20 cm diameter receiver telescope with an infrared PMT detector. The absorption of the on-line photons was 30%. The methane column absorption was estimated via HITRAN, and was in good agreement with the expected methane absorption for a concentration of 1750 ppm. Finally we have calculated the measurement performance of an airborne methane lidar using this transmitter, as well as the energy and telescope scaling needed for a lidar for space. These results, and more details of our experiments will be described in the presentation.

Riris, Haris↗

Exploring Divisibility and Summability of 'Photon' Wave Packets in Nonlinear Optical Phenomena

Formulations for second and higher harmonic frequency up and down conversions, as well as multi photon processes directly assume summability and divisibility of photons. Quantum mechanical (QM) interpretations are completely congruent with these assumptions. However, for linear optical phenomena (interference, diffraction, refraction, material dispersion, spectral dispersion, etc.), we have a profound dichotomy. Most optical engineers innovate and analyze all optical instruments by propagating pure classical electromagnetic (EM) fields using Maxwell s equations and gives only lip-service to the concept "indivisible light quanta". Further, irrespective of linearity or nonlinearity of the phenomena, the final results are always registered through some photo-electric or photo-chemical effects. This is mathematically well modeled by a quadratic action (energy absorption) relation. Since QM does not preclude divisibility or summability of photons in nonlinear & multi-photon effects, it cannot have any foundational reason against these same possibilities in linear optical phenomena. It implies that we must carefully revisit the fundamental roots behind all light-matter interaction processes and understand the common origin of "graininess" and "discreteness" of light energy.

Prasad, Narasimha↗