SEARCH · Engineering Papers

Results for “Pattern matching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Confident detection of doubly ionized thorium in the extreme Ap star CPD-62° 2717

Despite the Universe containing primordial thorium (Th) of sufficient abundance to appear in stellar spectra, detection of Th has to date been tentative and based on just a few weak and blended lines. Here, we present convincing evidence not only for the first Th detection in a magnetic chemically peculiar Ap star but also for the first detection of Th iii in a stellar spectrum. CPD-62° 2717 was initially recognized as a highly magnetized Ap star due to resolved magnetically split lines captured in H-band spectra from the SDSS/APOGEE survey. The star was subsequently pinpointed as extraordinarily peculiar when careful inspection of the H-band line content revealed the presence of five lines of Th iii, none of which are detected in the other ∼1500 APOGEE-observed Ap stars. Follow-up with the VLT + UVES confirmed a similarly peculiar optical spectrum featuring dozens of Th iii lines, among other peculiarities. Unlike past claims of Th detection, and owing to high-resolution observations of the strong (∼8–12 kG) magnetic field of CPD-62° 2717, the detection of Th iii can in this case be supported by matches between the observed and theoretical magnetic splitting patterns. Comparison of CPD-62° 2717 to stars for which Th overabundances have been previously reported (e.g. Przybylski’s Star) indicates that only for CPD-62° 2717 is the Th detection certain. Along with the focus on Th iii, we use time series measurements of the magnetic field modulus to constrain the rotation period of CPD-62° 2717 to ∼4.8 yr, thus establishing it as a new example of a superslowly rotating Ap star.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1976

Blade row dynamic digital compressor program. Volume 1: J85 clean inlet flow and parallel compressor models

The results are presented of a one-dimensional dynamic digital blade row compressor model study of a J85-13 engine operating with uniform and with circumferentially distorted inlet flow. Details of the geometry and the derived blade row characteristics used to simulate the clean inlet performance are given. A stability criterion based upon the self developing unsteady internal flows near surge provided an accurate determination of the clean inlet surge line. The basic model was modified to include an arbitrary extent multi-sector parallel compressor configuration for investigating 180 deg 1/rev total pressure, total temperature, and combined total pressure and total temperature distortions. The combined distortions included opposed, coincident, and 90 deg overlapped patterns. The predicted losses in surge pressure ratio matched the measured data trends at all speeds and gave accurate predictions at high corrected speeds where the slope of the speed lines approached the vertical.

Tesch, W. A.↗

NASA NTRS1988

Application of optical correlation techniques to particle imaging velocimetry

Pulsed laser sheet velocimetry yields nonintrusive measurements of velocity vectors across an extended 2-dimensional region of the flow field. The application of optical correlation techniques to the analysis of multiple exposure laser light sheet photographs can reduce and/or simplify the data reduction time and hardware. Here, Matched Spatial Filters (MSF) are used in a pattern recognition system. Usually MSFs are used to identify the assembly line parts. In this application, the MSFs are used to identify the iso-velocity vector contours in the flow. The patterns to be recognized are the recorded particle images in a pulsed laser light sheet photograph. Measurement of the direction of the partical image displacements between exposures yields the velocity vector. The particle image exposure sequence is designed such that the velocity vector direction is determined unambiguously. A global analysis technique is used in comparison to the more common particle tracking algorithms and Young's fringe analysis technique.

Wernet, Mark P.↗

NASA NTRS1988

Application of optical correlation techniques to particle imaging

Pulsed laser sheet velocimetry yields noninstrusive measurements of velocity vectors across an extended 2-dimensional region of the flow field. The application of optical correlation techniques to the analysis of multiple exposure laser light sheet photographs can reduce and/or simplify the data reduction time and hardware. Here, Matched Spatial Filters (MSF) are used in a pattern recognition system. Usuallay MSFs are used to identify the assembly line parts. In this application, the MSFs are used to identify the iso-velocity vector contours in the flow. The patterns to be recognized are the recorded particle images in a pulsed laser light sheet photograph. Measurement of the direction of the particle image displacements between exposures yields the velocity vector. The particle image exposure sequence is designed such that the velocity vector direction is determined unambiguously. A global analysis technique is used in comparison to the more common particle tracking algorithms and Young's fringe analysis technique.

Wernet, Mark P.↗

NASA NTRS2009

Evaluation of Material Models within LS-DYNA(Registered TradeMark) for a Kevlar/Epoxy Composite Honeycomb

The performance of material models to simulate a novel composite honeycomb Deployable Energy Absorber (DEA) was evaluated using the nonlinear explicit dynamic finite element code LS-DYNA(Registered TradeMark). Prototypes of the DEA concept were manufactured using a Kevlar/Epoxy composite material in which the fibers are oriented at +/-45 degrees with respect to the loading axis. The development of the DEA has included laboratory tests at subcomponent and component levels such as three-point bend testing of single hexagonal cells, dynamic crush testing of single multi-cell components, and impact testing of a full-scale fuselage section fitted with a system of DEA components onto multi-terrain environments. Due to the thin nature of the cell walls, the DEA was modeled using shell elements. In an attempt to simulate the dynamic response of the DEA, it was first represented using *MAT_LAMINATED_COMPOSITE_FABRIC, or *MAT_58, in LS-DYNA. Values for each parameter within the material model were generated such that an in-plane isotropic configuration for the DEA material was assumed. Analytical predictions showed that the load-deflection behavior of a single-cell during three-point bending was within the range of test data, but predicted the DEA crush response to be very stiff. In addition, a *MAT_PIECEWISE_LINEAR_PLASTICITY, or *MAT_24, material model in LS-DYNA was developed, which represented the Kevlar/Epoxy composite as an isotropic elastic-plastic material with input from +/-45 degrees tensile coupon data. The predicted crush response matched that of the test and localized folding patterns of the DEA were captured under compression, but the model failed to predict the single-cell three-point bending response.

Polanco, Michael A.↗

NASA NTRSDate not supplied

Climate Fingerprinting Sounder Product (ClimFiSP) Skin Temperature Trends Analysis

Climate fingerprinting Sounder Product (ClimFiSP) has been developed at NASA Langley Research Center which includes daily skin temperature, surface emissivity, air temperature, H2O, trace gases, and cloud properties on 0.5x0.5 grid. Those properties are derived from IR hyper-spectral radiance measured by AIRS on Aqua and CrIS on SNPP and JPSS series. Global skin temperature trends have been derived using more than 20 years of monthly mean skin temperature data from ClimFiSP. The ClimFiSP algorithm use the spectral fingerprinting methodology that allows a low latency procession of more than two decades long satellite data record. The computational cost can be reduced by more than two orders of magnitude as compared with traditional Level-Level2-Level3 retrieval algorithms. In this presentation the global skin temperature trend from ClimFiSP will be compared with skin temperature trend derived from CLIMCAPS, ERA5, GISTEMP, HadCRUT5, and IASI data products, and the results show that pattern of ClimFiSP global skin temperature trends overall matches well with other datasets. The zonally averaged skin temperature anomaly will also be validated using those datasets. It is expected that ClimFiSP surface temperature data can serve as an important complement for surface-based estimates, especially in the regions where the spatial coverage of the surface-based observations is scarce.

Liqiao Lei↗

DOE OSTI2020

Macroscopic Nonuniformities in Metal Grids Formed by Cracked Film Lithography Result in 19.3% Efficient Solar Cells

Cracked film lithography (CFL) is an emerging method for patterning transparent conductive metal grids. CFL can be vacuum- and Ag-free, and it forms more durable grids than nanowire approaches. In spite of CFL’s promising transmittance/grid sheet resistance/wire spacing tradeoffs, previous solar cell demonstrations have had relatively low performance. This work introduced macroscopic nonuniformities in the grids to improve the short-circuit current density/fill factor tradeoff in small area Cu(In,Ga)Se2 cells. Furthermore, the performance of optimized baseline grids was matched by CFL grids with microscopic openings and macroscopic patterns, culminating in a 19.3%-efficient cell. Simulations show that uniform CFL grids are enhanced by patterning because it leads to better balance among shadowing, grid resistance and transparent conductive oxide resistance losses. Thin-film module efficiency calculations were performed to highlight the performance gains that metal grids can enable by eliminating the transparent conductive oxide losses and widening monoliths. Adding the patterned CFL grids demonstrated in this work to CIGS modules is predicted to reach 0.7% higher efficiency (absolute) than screen-printed grids.

14 SOLAR ENERGY↗

DOE OSTI2021

Strain-Induced Lateral Heterostructures in Patterned Semiconductor Nanomembranes for Micro- and Optoelectronics

The ability to tailor the energy band lineup of semiconductor materials plays a key role in the development of many electronic and optoelectronic devices and normally relies on heteroepitaxy. In this work, we report a different method, based on strain engineering, for the controlled introduction of variations in bandgap energy with lateral position in thin films. External stress is applied on Ge nanomembranes stacked with an array of amorphous-Si pillars in order to create a non-uniform strain (and therefore bandgap energy) distribution commensurate with the sample thickness variations. The resulting strain profiles are mapped using Bragg diffraction with a hard X-ray probe featuring nanoscale spatial resolution. Compared with traditional heterostructures grown by epitaxial techniques, these strain-engineered samples involve a single chemical composition and are not limited in the choice of compatible materials by any restriction imposed by lattice-matching requirements. Furthermore, their energy band lineups can be patterned in nearly arbitrary shapes using nanolithography to control the thickness profile and can be tuned actively by varying the applied stress. As a result, these structures are attractive for a wide range of device applications (including lasers, LEDs, solar cells, and thermoelectrics) that require complex heterostructure lineups with multiple bandgap energies.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Collection of fluorescence from an ion using trap-integrated photonics

Spontaneously emitted photons are entangled with the electronic and nuclear degrees of freedom of the emitting atom, so interference and measurement of these photons can entangle separate matter-based quantum systems as a resource for quantum information processing. Since confinement in a single-mode facilitates the photon interference needed for generating entanglement, the dipole emission patterns relevant in spontaneous emission present a mode-matching challenge. Current demonstrations rely on bulk photon-collection and manipulation optics that suffer from large component size and system-to-system variability—factors that impede scaling to the large numbers of entangled pairs needed for quantum information processing. To address these limitations, we demonstrate a collection method that enables passive phase stability, straightforward photonic manipulation, and intrinsic reproducibility. Specifically, we engineer a waveguide-integrated grating to couple photons emitted from a trapped ion into a single optical mode within a microfabricated ion-trap chip. Using the integrated collection optic, we characterize the collection efficiency, image the ion, and detect the ion’s quantum state. The integrated optic covers 2.18% of the solid angle and collects 1.97 ± 0.3% of the spontaneously emitted light incident on the grating for a total collection efficiency of 0.043% into a single-mode waveguide. This proof-of-principle demonstration lays the foundation for leveraging the inherent stability and reproducibility of integrated photonics to create, manipulate, and measure multipartite quantum states in arrays of quantum emitters.

Optical physics↗

DOE OSTI2022

Reshaped Weyl fermionic dispersions driven by Coulomb interactions in MoTe 2

In this work, we report the direct evidence of impacts of the Coulomb interaction in a prototypical Weyl semimetal, MoTe 2 , that alter its bare bands in a wide range of energy and momentum. Our quasiparticle interference patterns measured using scanning tunneling microscopy are shown to match the joint density of states of quasiparticle energy bands including momentum-dependent self-energy corrections, while electronic energy bands based on the other simpler local approximations of the Coulomb interaction fail to explain neither the correct number of quasiparticle pockets nor the shape of their dispersions observed in our spectrum. With this, we predict a transition between type-I and type-II Weyl fermions with doping and resolve its disparate quantum oscillation experiments, thus highlighting the critical roles of Coulomb interactions in layered Weyl semimetals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1986

Large-scale short-period sea ice atmosphere interaction

Changes in the microwave brightness temperature measured by the Electrically Scanning Microwave Radiometer (ESMR) flown on board the Nimbus V satellite reveal large-scale sea ice fluctuations in the Antarctic marginal ice zone. These ice margin fluctuations arre predominantly wave numbers 1-4, with phase speeds of about 3 m/s independent of wave number. The spatial pattern and eastward advection of the sea ice anomalies match those of the atmospheric sea level pressure, and are consistent with sea ice displacement due to surface wind stress. Examination of the outgoing longwave radiation indicates that suppression of high clouds in regions of increased sea ice inc reases the radiative cooling which contributes to maintaining the ice. Data from three winter seasons indicate about a one-third probability of occurence of this large scale high frequency sea ice atmosphere interaction during any given 2-week period in winter.

Cahalan, Robert F.↗

NASA NTRS1990

Barotropic instability with divergence - Theory and applications to Venus

IR images of Venus reveal a curious double-lobed hot spot in the polar region. Elson (1982) has suggested that this dipole represents a barotropic instability associated with a high-latitude jet. Unfortunately, the classical theory of barotropic instability cannot predict temperature variations. This paper generalizes the theory to include horizontal divergence, vertical motions, and temperature variations, and applies it to the stratosphere of Venus. The fastest-growing barotropic instability in the nominal model matches the observed dipole in period and horizontal temperature pattern. The accompanying wind variations are comparable to the speed of the mean jet, indicating strong nonlinear effects. It is concluded that the Venus dipole may represent the self-limited stage of a barotropic instability with divergence.

Dobrovolskis, Anthony R.↗

NASA NTRS1993

Orientation of Planar Deformation Features (PDFs) in quartz

Differently oriented single crystal quartz was shocked experimentally at pressures of 20 to 32 GPa and pre-shock temperatures up to 630 C. Based on this systematic investigation, we can demonstrate that the orientation of planar deformation features in quartz is not only dependent on shock pressure but also on pre-shock temperature and shock direction. Moreover, the orientation of Planar Deformation Features (PDF's) is strongly influenced by the set-up in recovery experiments. PDF's in quartz are defined as optically recognizable, planar microstructures diagnostically produced by shock compression. PDF's differ from all kinds of microstructures found in volcanic environment and therefore, their presence is a primary criterion for recognizing impact craters and ejecta layers such as the K/T boundary. Because experiments have shown a pressure dependence of the orientation of PDF's, this property is used extensively for shock wave barometry in natural impact sites. However, the unreflected application of experimental results neglects that parameters such as pre-shock temperature, shock direction, or the experimental arrangement may influence the spatial distribution of PDF's. In order to test this assumption, shock experiments on single crystal quartz at pre-shock temperatures of 20, 275, 540, and 630 C, and with shock directions (1010) and (0001) were performed. Most of the recovery experiments were carried out by using a reverberation technique, whereas in only one experiment a single shock was produced (impedance method). In the former case 0.5 mm thin discs of single crystal quartz were used, in the latter a 15 mm thick cylinder. The orientation of PDF's was measured by means of a conventional universal stage and the results are given. Effects of the experimentation technique can be derived showing the orientation of PDF's in quartz shocked at 27.5 GPa. In comparison to the well defined peaks at (1012) found in samples from reverberation experiments, the impedance matching technique causes PDF's with a broad distribution pattern and indistinct maxima. Our results have serious implications for shock-wave barometry in nature: the existing classification scheme which relates PDF orientation exclusively to shock pressure is no longer applicable. In consequence more experimental data is needed.

Langenhorst, F.↗

NASA NTRS1999

Formation of compact myelin is required for maturation of the axonal cytoskeleton

Although traditional roles ascribed to myelinating glial cells are structural and supportive, the importance of compact myelin for proper functioning of the nervous system can be inferred from mutations in myelin proteins and neuropathologies associated with loss of myelin. Myelinating Schwann cells are known to affect local properties of peripheral axons (de Waegh et al., 1992), but little is known about effects of oligodendrocytes on CNS axons. The shiverer mutant mouse has a deletion in the myelin basic protein gene that eliminates compact myelin in the CNS. In shiverer mice, both local axonal features like phosphorylation of cytoskeletal proteins and neuronal perikaryon functions like cytoskeletal gene expression are altered. This leads to changes in the organization and composition of the axonal cytoskeleton in shiverer unmyelinated axons relative to age-matched wild-type myelinated fibers, although connectivity and patterns of neuronal activity are comparable. Remarkably, transgenic shiverer mice with thin myelin sheaths display an intermediate phenotype indicating that CNS neurons are sensitive to myelin sheath thickness. These results indicate that formation of a normal compact myelin sheath is required for normal maturation of the neuronal cytoskeleton in large CNS neurons.

NASA Discipline Neuroscience↗

NASA NTRS2012

Sonification of Kepler Field SU UMa Cataclysmic Variable Stars V344 Lyr and V1504 Cyg

Sonification is the conversion of quantitative data into sound. In this work we explain the methods used in the sonification of light curves provided by the Kepler instrument from Q2 through Q6 for the cataclysmic variable systems V344 Lyr and V1504 Cyg . Both systems are SU UMa stars showing dwarf nova outbursts and superoutbursts as well as positive and negative superhumps. Focused sonifications were done from average pulse shapes of each superhump, and separate sonifications of the full, residual light curves were done for both stars. The audio of these data reflected distinct patterns within the evolutions of supercycles and superhumps that matched pervious observations and proved to be effective aids in data analysis.

Tutchton, Roxanne M.↗

DOE OSTI2020

On-chip spectroscopic sensors with optical fringe suppression

An on-chip spectroscopic sensor includes a tunable diode laser. A laser driver for drives the tunable diode laser. An analyte test cavity receives a chemical sample and exposes the received chemical sample to light from the tunable diode laser. An optical detector detects light emerging from the analyte test cavity as a result of the laser exposure. A spectral analyzer determines a spectrum of the emerging light, matches and removes one or more known optical fringe patterns from the determined spectrum, and determines a composition or concentration of the chemical sample from the optical fringe pattern-removed spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

On-chip spectroscopic sensors with optical fringe suppression

Green, William↗

NASA NTRS2002

Supergranule Rotation Rates and Lifetimes

Previous measurements of the rotation rate of the supergranule Doppler pattern have revealed three interesting characteristics. 1) The supergranule pattern rotates faster than the plasma at the surface and, at each latitude, it rotates faster than the plasma at any level below the surface. 2) Larger cells rotate more rapidly than smaller cells. 3) Faster rotation rates are found when using larger time lags between Doppler images. These last two characteristics are consistent with the idea that large cells live longer and extend deeper into the Sun where the rotation rate is faster. A re-examination of the rotation rates and lifetimes of the Doppler patterns seen with the Michelson Doppler Imager (MDI) instrument on Solar and Heliospheric Observatory (SOHO) confirms these characteristics. However, a simulation of the data using a spectrum for the cellular flows that matches the observed spectrum shows that these characteristics can be largely reproduced by cellular patterns that rotate at the same rate without any dependence upon cell size, The rotation rate , and its dependence on latitude, is nonetheless still faster than the surface or internal rotation rate. The difference in rotation rates as functions of cell size and time lag between observations is attributed to projection effects on the line-of-sight Doppler signal. This data simulation is also used to determine characteristic lifetimes for the cellular patterns as a function of cell size. These lifetime determinations are also affected by projection effects on the line-of-sight Doppler signal.

Hathaway, David H.↗