Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROTECTIVE COVERINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Static measurement of the thickness of the ablative coating of the solid rocket boosters

The Solid Rocket Boosters (SRB's) used to launch the Space Shuttle are coated with a layer of ablative material to prevent thermal damage when they reenter the earth's atmosphere. The coating consists of a mixture of cork, glass, and resin. A new coating (Marshall Convergent Coating, MCC-2) was recently developed that is environmentally complaint. The coating must meet certain minimum thickness standards in order to protect the SRB. The coating is applied by a robot controlled nozzle that moves from the bottom to top, as the rocket part rotates on a table. Several coats are applied, building up to the desired thickness. Inspectors do a limited amount of destructive 'wet' testing. This involves an inspector inserting a rod in the wet coating and removing the rod. This results in a hole that, of course, must be patched later. The material is cured and the thickness is measured. There is no real-time feedback as the coating is being applied. Although this might seem like the best way to control thickness, the problems with 'blowback' (reflected material covering the sensor) are formidable, and have not been solved. After the thermal coating is applied, a protective top coat is applied. The SRB part is then placed in a oven and baked to harden the surface. The operations personnel then measure the thickness of the layer using the Kaman 7200 Displacement Measuring System. The probe is placed on the surface. One person (the inspector) reads the instrument, while another(the technician) records the thickness. Measurements are taken at one foot intervals. After the measurements are taken, the number of low readings is tabulated. If more than 10 percent of the points fall below the minimum value, there is a design review, and the part may be stripped of coating, and a new coating is applied. There is no other analysis.

Harrison, Harry C.↗
NASA NTRS1985

Prestressed Thermal-Protection Panels

Panels held securely with minimum of mounting hardware. Each panel held in place by single screw that pulls it into flat shape from its original shallow-dish shape. Shape and prestressing make panel stiff: resists vibration and withstands large mechanical loads. Panel shape and mounting arrangement not limited to thermal-protection systems but also used on aircraft, building walls, or wherever large surfaces must be covered with stiff, flat sheets easily removed for maintenance.

Dunn, T. J.↗
NASA NTRS1985

Mass loss of shuttle space suit orthofabric under simulated ionospheric atomic oxygen bombardment

Many polymeric materials used for thermal protection and insulation on spacecraft degrade significantly under prolonged bombardment by ionospheric atomic oxygen. The covering fabric of the multilayered shuttle space suit is composed of a loose weave of GORE-TEX fibers, Nomex and Kevlar-29, which are all polymeric materials. The complete evaluation of suit fabric degradation from ionospheric atomic oxygen is of importance in reevaluating suit lifetime and inspection procedures. The mass loss and visible physical changes of each test sample was determined. Kapton control samples and data from previous asher and flight tests were used to scale the results to reflect ionospheric conditions at about 220 km altitude. It is predicted that the orthofabric loses mass in the ionosphere at a rate of about 66% of the original orthofabric mass/yr. The outer layer of the two-layer orthofabric test samples shows few easily visible signs of degradation, even when observed at 440X. It is concluded that the orthofabric could suffer significant loss of performance after much less than a year of total exposure time, while the degradation might be undetectable in post flight visual examinations of space suits.

Miller, W. L.↗
NASA NTRS1989

Evaluation of atomic oxygen resistant protective coatings for fiberglass-epoxy composites in LEO

Fiberglass-epoxy composite masts are the prime structural members for the Space Station Freedom solar array. At the altitude where Space Station Freedom will operate, atomic oxygen atoms are the most predominant species. Atomic oxygen is highly reactive and has been shown to oxidize organic and some metallic materials. Tests with random and directed atomic oxygen exposure have shown that the epoxy is removed from the composite exposing brittle glass fibers which could be easily removed from the surface where they could contaminate Space Station Freedom Systems. Protection or fiber containment systems; inorganic based paints, aluminum braid, and a metal coating; were evaluated for resistance to atomic oxygen, vacuum ultraviolet radiation, thermal cycling, and mechanical flexing. All appeared to protect well against atomic oxygen and provide fiber containment except for the single aluminum braid covering. UV radiation resistance was acceptable and in general, thermal cycling and flexure had little to no effect on the mass loss rate for most coatings.

Rutledge, Sharon K.↗
NASA NTRS1989

Evaluation of atomic oxygen resistant protective coatings for fiberglass-epoxy composites in LEO

Fiberglass-epoxy composite masts are the prime structural members for the Space Station Freedom solar array. At the altitude where Space Station Freedom will operate, atomic oxygen atoms are the most predominant species. Atomic oxygen is highly reactive and has been shown to oxidize organic and some metallic materials. Tests with random and directed atomic oxygen exposure have shown that the epoxy is removed from the composite exposing brittle glass fibers which could be easily removed from the surface where they could contaminate space Station Freedom Systems. Protection or fiber containment systems, inorganic based paints, aluminum braid, and a metal coatinsg, were evaluated for resistance to atomic oxygen, vacuum ultraviolet radiation, thermal cycling, and mechanical flexing. All appeared to protect well against atomic oxygen and provide fiber containment except for the single aluminum braid covering. UV radiation resistance was acceptable and in general, thermal cycling and flexure had little to no effect on the mass loss rate for most coatings.

Rutledge, Sharon K.↗
NASA NTRS2010

Electrochemical Detection of Multiple Bioprocess Analytes

An apparatus that includes highly miniaturized thin-film electrochemical sensor array has been demonstrated as a prototype of instruments for simultaneous detection of multiple substances of interest (analytes) and measurement of acidity or alkalinity in bioprocess streams. Measurements of pH and of concentrations of nutrients and wastes in cell-culture media, made by use of these instruments, are to be used as feedback for optimizing the growth of cells or the production of desired substances by the cultured cells. The apparatus is designed to utilize samples of minimal volume so as to minimize any perturbation of monitored processes. The apparatus can function in a potentiometric mode (for measuring pH), an amperometric mode (detecting analytes via oxidation/reduction reactions), or both. The sensor array is planar and includes multiple thin-film microelectrodes covered with hydrous iridium oxide. The oxide layer on each electrode serves as both a protective and electrochemical transducing layer. In its transducing role, the oxide provides electrical conductivity for amperometric measurement or pH response for potentiometric measurement. The oxide on an electrode can also serve as a matrix for one or more enzymes that render the electrode sensitive to a specific analyte. In addition to transducing electrodes, the array includes electrodes for potential control. The array can be fabricated by techniques familiar to the microelectronics industry. The sensor array is housed in a thin-film liquid-flow cell that has a total volume of about 100 mL. The flow cell is connected to a computer-controlled subsystem that periodically draws samples from the bioprocess stream to be monitored. Before entering the cell, each 100-mL sample is subjected to tangential-flow filtration to remove particles. In the present version of the apparatus, the electrodes are operated under control by a potentiostat and are used to simultaneously measure the pH and the concentration of glucose. It is anticipated that development of procedures for trapping more enzymes into hydrous iridium oxide (and possibly into other electroactive metal oxides) and of means for imparting long-term stability to the transducer layers should make it possible to monitor concentrations of products of many enzyme reactions for example, such key bioprocess analytes as amino acids, vitamins, lactose, and acetate.

Rauh, R. David↗
NASA NTRS2021

Delaware Ecological Forecasting: Assessing Land Cover and Soil to Identify Suitable Sites for Tidal Marsh Migration in Delaware

Tidal wetlands provide vital resources for the state of Delaware, crucial not only for maintaining important ecosystem functions, but also for providing human populations with substantial services. Healthy wetland networks offer protection from severe weather, reduce flooding, improve water quality, and provide opportunities for education and recreation. However, human activities in combination with natural events, continue to cause substantial loss of wetland cover and damage wetland health. Over the last thirty years, the state of Delaware has experienced a net loss of roughly 5,000 acres of wetland. In collaboration with the Delaware Department of Natural Resources and Environmental Control (DNREC), the team used NASA Earth observations including Landsat 5 Thematic Mapper (TM), Landsat 8 Operational Land Imager (OLI), Terra Moderate Resolution Imaging Spectroradiometer (MODIS), and Global Precipitation Measurement Integrated Multi-Satellite Retrievals (GPM IMERG) to develop a methodology to monitor recent changes in wetland cover and forecast landward marsh migration due to sea-level rise, changes to climate, and human development. Trend analysis of current and past climate conditions in precipitation and temperature revealed an overall increase in both metrics. Using Land Change Modeler in TerrSet and Suitability Modeler in ArcGIS Pro, the team visualized landcover shifts over the last 20 years, indicating a general pattern of net wetland loss and identified locations where marsh migration could potentially occur in the future. These observations will enable better planning for restoration activities and in form decision-making to preserve wetland health and ecosystem functions.

McKenna Brahler↗
NASA NTRS1988

Evaluation and mitigation of lightning hazards to the space shuttle Solid Rocket Motors (SRM)

The objective was to quantify electric field strengths in the Solid Rocket Motor (SRM) propellant in the event of a worst case lightning strike. Using transfer impedance measurements for selected lightning protection materials and 3D finite difference modeling, a retrofit design approach for the existing dielectric grain cover and railcar covers was evaluated and recommended for SRM segment transport. A safe level of 300 kV/m was determined for the propellant. The study indicated that a significant potential hazard exists for unprotected segments during rail transport. However, modified railcar covers and grain covers are expected to prevent lightning attachment to the SRM and to reduce the levels to several orders of magnitude below 300 kV/m.

Rigden, Gregory J.↗
NASA NTRS1974

San Marco C-2 (San Marco-4) Post Launch Report No. 1

The San Marco C-2 spacecraft, now designated San Marco-4, was successfully launched by a Scout vehicle from the San Marco Platform on 18 February 1974 at 6:05 a.m. EDT. The launch occurred 2 hours 50 minutes into the 3-hour window due co low cloud cover at the launch site. All spacecraft subsystems have been checked and are functioning normally. The protective caps for the two U.S. experiments were ejected and the Omegatron experiment activated on 19 February. The neutral mass spectrometer was activated as scheduled on 22 February after sufficient time to allow for spacecraft outgassing and to avoid the possibility of corona occurring. Both instruments are performing properly and worthwhile scientific data is being acquired.

Source record↗
NASA NTRS2013

Design and Execution of the Hypersonic Inflatable Aerodynamic Decelerator Large-Article Wind Tunnel Experiment

The testing of 3- and 6-meter diameter Hypersonic Inflatable Aerodynamic Decelerator (HIAD) test articles was completed in the National Full-Scale Aerodynamics Complex 40 ft x 80 ft Wind Tunnel test section. Both models were stacked tori, constructed as 60 degree half-angle sphere cones. The 3-meter HIAD was tested in two configurations. The first 3-meter configuration utilized an instrumented flexible aerodynamic skin covering the inflatable aeroshell surface, while the second configuration employed a flight-like flexible thermal protection system. The 6-meter HIAD was tested in two structural configurations (with and without an aft-mounted stiffening torus near the shoulder), both utilizing an instrumented aerodynamic skin.

Cassell, Alan M.↗
NASA NTRSDate not supplied

Case Study of Meteoroid Fluence on a Mars Sample Return Mission

The Mars Sample Return Campaign must satisfy a Back Planetary Protection requirement that limits the risk of biological contamination of the Earth by Martian microbes. The Earth Re-turn Orbiter (ERO), being developed by the European Space Agency (ESA), will carry a Capture, Containment and Return System (CCRS), which is being developed by NASA to retrieve orbiting samples (OS) from Mars orbit, surround them with two containment layers to create a Contained OS (COS), and transfer the COS to the Earth Entry System (EES), which will be re-leased by ERO to carry the samples through entry, descent and landing at the Utah Test and Training Range. Micrometeoroid impact damage to the Thermal Protection System (TPS) of the EES, which may occur at any time in the ERO mission, is recognized as a potential risk driver for loss of sample containment that needs to be rigorously assessed. A Micrometeoroid Protection System (MMPS) will be implemented to limit that risk. The MMPS consists of a shield covering the TPS called the Micrometeoroid Garage (MMG) and a system of cameras to inspect the TPS. An extensive study was performed by the CCRS Project in collaboration with the NASA Engineering and Safety Center (NESC)to assess the probability of damage to the MMG and TPS by meteoroids over the entire ERO mission. This included the computation of the meteoroid fluence on the MMG and directly on the TPS after EES separation, and assessment of damage to the MMG and TPS via hypervelocity impact tests, hydrocode simulations, and empirical damage prediction and ballistic limit equations (BLEs). The focus of this paper is the meteoroid fluence on the MMG.

Micrometeoroid↗
NASA NTRSDate not supplied

Case Study of Meteoroid Fluence on a Mars Sample Return Mission

The Mars Sample Return Campaign must satisfy a Back Planetary Protection requirement that limits the risk of biological contamination of the Earth by Martian microbes. The Earth Re-turn Orbiter (ERO), being developed by the European Space Agency (ESA), will carry a Capture, Containment and Return System (CCRS), which is being developed by NASA to retrieve orbiting samples (OS) from Mars orbit, surround them with two containment layers to create a Contained OS (COS), and transfer the COS to the Earth Entry System (EES), which will be re-leased by ERO to carry the samples through entry, descent and landing at the Utah Test and Training Range. Micrometeoroid impact damage to the Thermal Protection System (TPS) of the EES, which may occur at any time in the ERO mission, is recognized as a potential risk driver for loss of sample containment that needs to be rigorously assessed. A Micrometeoroid Protection System (MMPS) will be implemented to limit that risk. The MMPS consists of a shield covering the TPS called the Micrometeoroid Garage (MMG) and a system of cameras to inspect the TPS. An extensive study was performed by the CCRS Project in collaboration with the NASA Engineering and Safety Center (NESC)to assess the probability of damage to the MMG and TPS by meteoroids over the entire ERO mission. This included the computation of the meteoroid fluence on the MMG and directly on the TPS after EES separation, and assessment of damage to the MMG and TPS via hypervelocity impact tests, hydrocode simulations, and empirical damage prediction and ballistic limit equations (BLEs). The focus of this paper is the meteoroid fluence on the MMG.

micrometeoroid↗
NASA NTRS2007

POSS(Registered TradeMark) Coatings for Solar Cells: An Update

Presently, solar cells are covered with Ce-doped microsheet cover glasses that are attached with Dow Corning DC 93-500 silicone adhesive. Various antireflection coatings are often applied to the cover glass to increase cell performance. This general approach has been used from the beginning of space exploration. However, it is expensive and time consuming. Furthermore, as the voltage of solar arrays increases, significant arcing has occurred in solar arrays, leading to loss of satellite power. The cause has been traced to differential voltages between strings and the close spacing between them with no insulation covering the edges of the solar cells. In addition, this problem could be ameliorated if the cover glass extended over the edges of the cell, but this would impact packing density. An alternative idea that might solve all these issues and be less expensive and more protective is to develop a coating that could be applied over the entire array. Such a coating must be resistant to atomic oxygen for low earth orbits below about 700 km, it must be resistant to ultraviolet radiation for all earth and near-sun orbits and, of course, it must withstand the damaging effects of space radiation. Coating flexibility would be an additional advantage. Based on past experience, one material that has many of the desired attributes of a universal protective coating is the Dow Corning DC 93-500. Of all the potential optical plastics, it appears to be the most suitable for use in space. As noted above, DC 93-500 has been extensively used to attach cover glasses to crystalline solar cells and has worked exceptionally well over the years. It is flexible and generally resistant to electrons, protons and ultraviolet (UV and VUV) radiation; although a VUV-rejection coating or VUV-absorbing ceria-doped cover glass may be required for long mission durations. It can also be applied in a thin coating (< 25 m) by conventional liquid coating processes. Unfortunately, when exposed to atomic oxygen (AO) DC 93-500 develops a frosty surface. Such frosting can lead to a loss of light transmitted into the cells and destroy the essential clarity needed for a concentrator lens.

Brandhorst, Henry↗
NASA NTRS1992

NASA upper atmosphere research program: Research summaries, 1990 - 1991. Report to the Congress and the Environmental Protection Agency

The objectives, status, and accomplishments of the research tasks supported under the NASA Upper Atmosphere Research Program (UARP) are presented. The topics covered include the following: balloon-borne in situ measurements; balloon-borne remote measurements; ground-based measurements; aircraft-borne measurements; rocket-borne measurements; instrument development; reaction kinetics and photochemistry; spectroscopy; stratospheric dynamics and related analysis; stratospheric chemistry, analysis, and related modeling; and global chemical modeling.

Source record↗
NASA NTRS1981

Design, fabrication and performance of high efficiency photovoltaic modules

Design details and performance and environmental test results of newly developed high performance and reliability photovoltaic modules are presented. Efficiencies averaging 14.3% for 3040 cells were obtained by using ion implantation for cell junction and back surface field formation. 152 rectangular (6.0 cm x 4.6 cm) cells arranged with a 97% local packing density comprise the circuit assembly, and cells are wired 4 in parallel by 38 in series. The top cover of the superstrate design module is composed of tempered low-iron glass to provide transparent protection for the optical surface. Results show that this design has an encapsulation system which does not fail in the event of reverse-bias operation, and an average module efficiency of 12.2% was achieved at a 58.6W power which varied only 2% among all 20 modules.

Nowlan, M. J.↗
NASA NTRS1991

Trailing Shield For Welding On Pipes

Trailing shield ensures layer of inert gas covers hot, newly formed bead between two tubes or pipes joined by plasma arc welding. Inert gas protects weld bead from oxidation by air until cooler and less vulnerable to oxidation. Intended for use on nickel-base alloy pipes, on which weld beads remain hot enough to oxidize after primary inert-gas purge from welding-torch cup has passed.

Coby, John B., Jr.↗
NASA NTRS1990

A silicon micromachined piezoresistive accelerometer for health and condition monitoring

Silicon micromachining etching techniques were utilized to batch-fabricate hundreds of general purpose microaccelerometers on a single silicon substrate. Piezoresistive sensing elements were aligned to the back-side patterns using an IR mask aligner and then diffused into the areas of maximum stress. Capping of the two-arm cantilever beam structure was achieved using a combination of electrostatic bonding and low temperature glass films. Overrange protection, critical damping, and overall protection from the outside environment are achieved by controlling the cavity depths of the top and bottom covers. Temperature compensation, amplification, and filtering are performed by a companion LSI chip that is interfaced to the accelerometer by conventional wire-bonding techniques.

Walsh, Kevin M.↗